Professional Documents
Culture Documents
AP-1000B Vs Cedarapids CR551 (QEXQ9703)
AP-1000B Vs Cedarapids CR551 (QEXQ9703)
Feature Comparison
Cat® AP-1000B
vs Cedarapids CR551
• Feeder gates strike off material • Feeder gates have been eliminat-
flowing to augers, creating segre- ed, allowing system to always
gation. move full load of material.
• Wide center feeder chain cover • Narrow center feeder chain cover
increases potential for center line helps eliminate segregation.
segregation. • Outboard feeder drives maxi-
• Inboard feeder drives provide a mize the live feeder area.
narrow live feeder area and create • Feeder width per side is
a potential segregation problem. 533 mm (21").
• Feeder width per side is
Sales Key: Efficient material handling mini-
457 mm (18").
mizes segregation.
• Flight bars and augers run at • Feeder versus auger speed can
same speed. be ratioed and run at separate
• Feeder gates control material paces with each side controlled
flow. individually.
• Feeders run at high speed • Auto/off/override mode for each
decreasing component life. feeder.
• Augers and feeders are mechan- • Feeders run at slower speeds
ically interlocked. increasing component life.
Sales Key: Efficient, low-maintenance
feed system.
• Steel ducts are used to direct • Suction fan pulls fumes away
fumes. from augers – no sheathing is
• Operator visibility to augers is used.
blocked by ducts. • Operator visibility to augers is
• Ducts block operator’s visibility unobstructed.
to head of material. • Operator has unobstructed visi-
• Narrow distance between bility to head of material.
sheathing and augers creates Sales Key: Superior visibility to augers for
potential for asphalt fines being the tractor and screed operators.
picked up by the system.
• Air is pulled from the left side • Cross-draft intake system pulls
and exits through the front of air from the left side and dis-
the machine in the hopper. charges it on the right.
• When the hopper is filled, • Asphalt or other debris does not
asphalt can roll into air exit. plug the system.
• System runs inefficiently when • System always runs efficiently.
plugged.
Sales key: Cooling system designed for
high ambient temperatures.
• Two stacked support tubes pro- • Two support tubes and extender
vide poor structural strength. frame member form triangular
• Stacked support tubes flex dur- configuration, providing struc-
ing wide width paving. tural strength.
• Rigid, triangular configuration
design resists flexing during
wide width paving.
Sales key: Greater structural integrity pro-
vides consistent mat quality.