This quality specification document outlines the parameters, units, test methods, and values for MOGUL DIESEL L-SAPS 15W-40 dated January 7, 2011, including a kinematic viscosity range of 12.5-16.3 mm2/s at 100°C, a maximum CCS viscosity of 7,000 mPa·s at -20°C, a minimum flash point of 205°C, and a typical TBN value of 9.4 mg KOH/g. The document also lists PARAMO a.s. as the manufacturer located in Pardubice, Czech Republic.
This quality specification document outlines the parameters, units, test methods, and values for MOGUL DIESEL L-SAPS 15W-40 dated January 7, 2011, including a kinematic viscosity range of 12.5-16.3 mm2/s at 100°C, a maximum CCS viscosity of 7,000 mPa·s at -20°C, a minimum flash point of 205°C, and a typical TBN value of 9.4 mg KOH/g. The document also lists PARAMO a.s. as the manufacturer located in Pardubice, Czech Republic.
This quality specification document outlines the parameters, units, test methods, and values for MOGUL DIESEL L-SAPS 15W-40 dated January 7, 2011, including a kinematic viscosity range of 12.5-16.3 mm2/s at 100°C, a maximum CCS viscosity of 7,000 mPa·s at -20°C, a minimum flash point of 205°C, and a typical TBN value of 9.4 mg KOH/g. The document also lists PARAMO a.s. as the manufacturer located in Pardubice, Czech Republic.
METHOD OF ANALYSIS Min., max. Typical Kinematic viscosity at 100 °C mm2/s EN ISO 3104 12.5 – 16.3 * CCS at -20 °C mPa·s ASTM D-2602 max. 7 000 Flash point °C EN ISO 2592 min. 205 * TBN mg KOH/g ISO 3771 9.4