Professional Documents
Culture Documents
Troubleshooting Reference
Troubleshooting Reference
f
Condition Cause Reference
The needle thread 1. The needle thread is not threaded properly.. Page 20
breaks. 2. The needle thread tension is too tight. Page 40
3o The needle is bent or blunt. Page 26
4. The needle is incorrectly inserted. Page 26
5. The needle thread and the bobbin thread are not set
properly under (drawn to the rear of) the. presser foot
when sewing is starting. Page 24
6. The fabric is not drawn to the rear when sewing is
finished. Page 32
7. The thread is too heavy or too fine for the needle. Page 28
The bobbin thread 1. The bobbin thread is not threaded properly in the
breaks. bobbin holder. Paget8
2_ Lint has collected in the bobbin holder. Page 84
3. The bobbin is damaged and doesn't turn smoothly. Changethe bobbin
The cloth is not 1. The feed dog is packed with lint. Page 84
feeding smoothly. 2_ The presser foot pressure is too weak. Page 44
3. The stitches are too fine. Make stitch coaser
4. The feed dog was not raised after "drop feed"was used. Page 44
86
Troubleshooting, cont'd
The automatic 1. The stitch density is not suitable for the fabric being
buttonhole sewn. Page 56
stitches are not 2, Interfacing is not being used with stretch fabricso Page 52
working,
Machine stalls and 1+ Lint has built up in the hook race. Page 84
the message 2o Needle or.bobbin thread is not correctly threaded., Pages 18, 20
"STOP FOR SAFETY 3, The fabric is too thick. Page 42
PURPOSES"
appears on the
screen.
Stop operating the machine until this message II STOP FOR SAFETY 1)
disappears (about 15 seconds),
87