Professional Documents
Culture Documents
Automatic Tensiometer
Automatic Tensiometer
F
• Various rings and plates
Temperature range -10 to 130°C
Power consumption 40 W • Thermostats for different applications
O
Mains supply 100 to 240 V AC, 47 to 63 Hz
• Density determination set, consisting of
Colour display (panel) Touchpanel, 800×600 px, 170×127 mm
special holder and immersion body
Dimensions 390×300×585mm (B×D×H)
Weight (instrument + panel)
ASTM D 0971 Standard test method for interfacial tension of oil against water by the ring method
ASTM D 1331
ASTM D 1417
Standard test method for surface and interfacial tension of solutions of surface active agents
Standard method of testing rubber latices (synthetic) I Ensuring quality with quality – the K11 from KRÜSS is the fully auto-
matic stand-alone instrument with touchscreen operation for quality
O
ASTM D 1590 Standard test method for surface tension of water
DIN 53914 Prüfung von Tensiden: Bestimmung der Oberflächenspannung control measurements of the surface and interfacial tension.
DIN EN 14210 Grenzflächenaktive Stoffe - Bestimmung der Grenzflächenspannung von
DIN EN 14370
ISO 1409
grenzflächenaktiven Lösungen mittels Bügel- oder Ringverfahren
Grenzflächenaktive Stoffe Bestimmung der Oberflächenspannung
Plastics /rubber - Polymer dispersions and rubber latices (natural and synthetic) -
N • Fully automatic determination of the surface
Determination of surface tension by the ring method and interfacial tension
ISO 304 Surface active agents - Determination of surface tension by drawing up liquid films
ISO 6889 Surface active agents - Determination of interfacial tension by drawing up liquid films • High-resolution, robust measuring system
Amtsblatt der EU Oberflächenspannung L251/37 (1984)
KRUSS BRO-EN-2011/11-K11
OECD 115 OECD Guideline for the Testing of Chemicals - Surface Tension of Aqueous Solutions
• Stand-alone instrument with large,
high-resolution touchscreen
• Fully automatic determination of the surface and interfacial tension for routine laboratory and
quality control measurements at the push of a button Select measuring method. Measuring templates with
standard parameters are included; these are suitable
• High-resolution and constant position force measurement with overload protection
for most cases.
• Stand-alone instrument with large, high-resolution, intuitive user interface
Step 2
to national reference standards
• Orientation on national and international standards Define the measurement. A name for the measure-
(e.g. DIN, ISO, ASTM) is possible ment is entered and – if the method requires it – the
• Rod method for small liquid volumes and density value. For individual solutions the measuring
density measurements is possible parameters can be flexibly altered.
With the large-format, high-resolution The instrument is equipped with a high- The touch-panel stores the results and
touch-panel automatic measurements precision force sensor that, apart from measuring parameters as well as raw
with the ring, plate or rod method installation or servicing, does not have data such as the time-dependent or
as well as lamella tear-off and density to be recalibrated. The force measure- path-dependent force values or the
measurements are configured, started ment works at a constant position, so lamella height – and therefore incor-
and saved.
Step 4
that height values such as the surface porates the functions of a software data
or lamella height can be determined or logger. Clearly-laid-out reports can be
Measuring parameter templates for
each method allow a measurement to set exactly. The sample table with built- transferred to a USB-stick or printed out
be programmed in only a few seconds. in stirrer moves in a speed range from on a directly connected printer. Create the report. The measurement report is drawn
Speeds, paths and detection sensitivities 0.1 to 500 mm/min. Optional acces- up by fingertip; it can be printed out immediately or
can be custom-made for the particular sories allow measurements to be made saved as a Microsoft XPS-file.
measuring task or adapted to comply at temperatures between -10°C and
with international standards. 130°C.
Overview of the K11 Quick and easy – four steps to a measuring report
• Fully automatic determination of the surface and interfacial tension for routine laboratory and
quality control measurements at the push of a button Select measuring method. Measuring templates with
standard parameters are included; these are suitable
• High-resolution and constant position force measurement with overload protection
for most cases.
• Stand-alone instrument with large, high-resolution, intuitive user interface
Step 2
to national reference standards
• Orientation on national and international standards Define the measurement. A name for the measure-
(e.g. DIN, ISO, ASTM) is possible ment is entered and – if the method requires it – the
• Rod method for small liquid volumes and density value. For individual solutions the measuring
density measurements is possible parameters can be flexibly altered.
With the large-format, high-resolution The instrument is equipped with a high- The touch-panel stores the results and
touch-panel automatic measurements precision force sensor that, apart from measuring parameters as well as raw
with the ring, plate or rod method installation or servicing, does not have data such as the time-dependent or
as well as lamella tear-off and density to be recalibrated. The force measure- path-dependent force values or the
measurements are configured, started ment works at a constant position, so lamella height – and therefore incor-
and saved.
Step 4
that height values such as the surface porates the functions of a software data
or lamella height can be determined or logger. Clearly-laid-out reports can be
Measuring parameter templates for
each method allow a measurement to set exactly. The sample table with built- transferred to a USB-stick or printed out
be programmed in only a few seconds. in stirrer moves in a speed range from on a directly connected printer. Create the report. The measurement report is drawn
Speeds, paths and detection sensitivities 0.1 to 500 mm/min. Optional acces- up by fingertip; it can be printed out immediately or
can be custom-made for the particular sories allow measurements to be made saved as a Microsoft XPS-file.
measuring task or adapted to comply at temperatures between -10°C and
with international standards. 130°C.
K11 2011/11
Technical data K11 Measuring methods KRÜSS Technical Information
F
• Various rings and plates
Temperature range -10 to 130°C
Power consumption 40 W • Thermostats for different applications
O
Mains supply 100 to 240 V AC, 47 to 63 Hz
• Density determination set, consisting of
Colour display (panel) Touchpanel, 800×600 px, 170×127 mm
special holder and immersion body
Dimensions 390×300×585mm (B×D×H)
Weight (instrument + panel)
ASTM D 0971 Standard test method for interfacial tension of oil against water by the ring method
ASTM D 1331
ASTM D 1417
Standard test method for surface and interfacial tension of solutions of surface active agents
Standard method of testing rubber latices (synthetic) I Ensuring quality with quality – the K11 from KRÜSS is the fully auto-
matic stand-alone instrument with touchscreen operation for quality
O
ASTM D 1590 Standard test method for surface tension of water
DIN 53914 Prüfung von Tensiden: Bestimmung der Oberflächenspannung control measurements of the surface and interfacial tension.
DIN EN 14210 Grenzflächenaktive Stoffe - Bestimmung der Grenzflächenspannung von
DIN EN 14370
ISO 1409
grenzflächenaktiven Lösungen mittels Bügel- oder Ringverfahren
Grenzflächenaktive Stoffe Bestimmung der Oberflächenspannung
Plastics /rubber - Polymer dispersions and rubber latices (natural and synthetic) -
N • Fully automatic determination of the surface
Determination of surface tension by the ring method and interfacial tension
ISO 304 Surface active agents - Determination of surface tension by drawing up liquid films
ISO 6889 Surface active agents - Determination of interfacial tension by drawing up liquid films • High-resolution, robust measuring system
Amtsblatt der EU Oberflächenspannung L251/37 (1984)
KRUSS BRO-EN-2011/11-K11
OECD 115 OECD Guideline for the Testing of Chemicals - Surface Tension of Aqueous Solutions
• Stand-alone instrument with large,
high-resolution touchscreen