Professional Documents
Culture Documents
Vvpx303f1 Specifications
Vvpx303f1 Specifications
Vvpx303f1 Specifications
VVPX303F1
Argus® Quad Antenna, 2 x 17102690 MHz, fixed electrical tilt
Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2180 2300–2690
Gain, dBi 12.7 13.3 14.0
Beamwidth, Horizontal, degrees 65 63 59
Beamwidth, Vertical, degrees 27.4 23.5 19.7
Beam Tilt, degrees 0 0 0
USLS (First Lobe), dB 18 18 19
FronttoBack Ratio at 180°, dB 28 28 30
CPR at Boresight, dB 23 18 23
CPR at Sector, dB 18 13 15
Isolation, dB 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc 150 150 150
Input Power per Port, maximum, watts 250 250 250
Polarization ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.
General Specifications
Antenna Brand Argus®
Antenna Type DualPol® quad
Band Single band
Brand Argus® | DualPol®
Operating Frequency Band 1710 – 2690 MHz
Performance Note Outdoor usage
Mechanical Specifications
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 2
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 26, 2016 February 14, 2016
Product Specifications
VVPX303F1
Lightning Protection dc Ground inner/outer conductor
Radome Material ASA, UV stabilized
RF Connector Interface 716 DIN Female
RF Connector Location Bottom
RF Connector Quantity, total 4
Wind Loading, maximum 180.0 N @ 160 km/h
40.5 lbf @ 160 km/h
Wind Speed, maximum 200 km/h | 124 mph
Dimensions
Depth 103.0 mm | 4.1 in
Length 420.0 mm | 16.5 in
Width 290.0 mm | 11.4 in
Net Weight 5.0 kg | 11.0 lb
Packed Dimensions
Depth 216.0 mm | 8.5 in
Length 605.0 mm | 23.8 in
Width 360.0 mm | 14.2 in
Included Products
T080GLE — Argus® Adjustable Tilt Pipe Mounting Kit for 2.0"4.5" (50115mm) OD round members for panel antennas.
Includes 2 clamp sets.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 2
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 26, 2016 February 14, 2016