Professional Documents
Culture Documents
All Types: This Note Cancels and Replaces Technical Note 3315E Part No. 77 11 206 336
All Types: This Note Cancels and Replaces Technical Note 3315E Part No. 77 11 206 336
EDITION ANGLAISE
NOVEMBER 2005
77 11 344 642 5037A Service 0465
Type S/Section
This note cancels and replaces Technical Note 3315E part no. 77 11 206 336
●
Engine: XXX Basic manual:
●
Gearbox: XXX
"The repair procedures given by the manufacturer in this document are based on the All rights reserved by RENAULT s.a.s.
technical specifications current when it was prepared.
Copying or translating, in part or in full, of this document or use of the service part
The methods may be modified as a result of changes introduced by the manufacturer reference numbering system is forbidden without the prior written authority of
in the production of the various component units and accessories from which his RENAULT s.a.s.
vehicles are constructed."
Immobiliser code:
VIN (17 characters)
Key head number (old vehicles, 8 characters maximum)
Programming key supplied by the diagnostic tool for CLIO III from CD 59.
Note:
This key head number is required if the 4-digit code supplied by the code server does not correspond to the vehicle;
the key head number + the VIN can be used to recalculate the new 4-digit code.
Radio code:
VIN (17 characters)
Pre-code or radio part number reference
Pre-code if the first code obtained using the VIN is not correct
Pre-code = 1 letter + 3 digits
Reprogramming key:
VIN (17 characters)
Reprogramming key supplied by the diagnostic tool
82A-1
ENGINE IMMOBILISER
Code supply 82A
Using the Code Management server to find codes:
1) Main menu in Renault Net, under Applications you will find Code Management:
PUBLICATIONS
PERSONNEL
APPLICATIONS
ACTIS
Code Management
Immobiliser codes
Radio codes
Reprogramming codes
Video codes
ICM
ICM Assistance
About the
main page
→ enter VIN + programming key supplied by the diagnostic tool for CLIO III from CD 59.
→ confirm with Search button
→ immobiliser code supplied as:
4 digits (old vehicles)
8 digits (MEGANE 1 and AVANTIME only)
12 characters (digits and letters)
13 characters (digits and letters for CLIO III from CLIP CD 59)
Code Management
Help
CODE MANAGEMENT
If the vehicle has no number inscribed on the key head, enter the VIN only
Code management
versions
Back_Contents
82A-2
ENGINE IMMOBILISER
Code supply 82A
If the immobiliser code supplied is not correct and you have the key head code (old vehicles), search again using the
same VIN, the following screen appears:
Code Management
Help
CODE MANAGEMENT
A similar search has already been performed for this vehicle in the last 12 hours
Code management
versions
82A-3
ENGINE IMMOBILISER
Code supply 82A
→ Select option 2
→ the following screen appears
→ select Back to entry
Code Management
Help
CODE MANAGEMENT
IMMOBILISER CODE
For old vehicles with a 4-digit security code, we recommend that in addition to the VIN, you enter the code inscribed on the key head.
This information is required to supply a new immobiliser code. If there is no code inscribed on the key head, please send the
special Help procedure message to the assistance unit.
Back to entry
Back_Contents
Code Management
Help
CODE MANAGEMENT
The diagnostic tool programming key is compulsory. We cannot deal with your request. Please correct your entry or send
the special Help procedure message to the assistance unit.
Back to entry
Code management
versions
Back_Contents
82A-4
ENGINE IMMOBILISER
Code supply 82A
→ two options available:
1 Display the immobiliser code for this vehicle contained in the database
2 Display the immobiliser code obtained using the VIN and the pre-code inscribed on the key head (for old
vehicles with a 4-digit immobiliser code)
→ select option 2
Code Management
Help
CODE MANAGEMENT
A similar search has already been performed for this vehicle in the last 12 hours
1. Display the immobiliser code for this vehicle contained in the database
2. Display the immobiliser code obtained using the VIN and the key pre-code (for old vehicles with a security code)
Code management
versions
82A-5
ENGINE IMMOBILISER
Code supply 82A
If you cannot obtain the correct code you must send a Help message:
FIELD INPUT
*To: SOSCodes
*From:
Message Text:
VIN: VF1BB1DEA33126191
Description of the problem: The user has already requested the immobiliser
code or the radio code for the vehicle in the last 12 hours and this is incorrect.
Dealership code:
Dealership name:
Contact:
Telephone (optional):
Send Message
→ Complete the mandatory fields; the other fields are completed automatically.
→ click the Send message button to send the message to Technical Assistance.
82A-6
ENGINE IMMOBILISER
Code supply 82A
2.2 Radio code:
Code Management
Help
CODE MANAGEMENT
Enter the VIN to obtain the radio code. Entry of the pre-code is optional.
VIN
Radio pre-code
Search
Code management
versions
Following an attempt to enter the code in the vehicle radio, if the code supplied is not correct, search for the radio's
pre-code:
Depending on the type of radio, recover the pre-code:
● either from the radio display using the self-test procedure
● or by removing the radio; the pre-code is found on the label affixed to the radio.
Note:
The pre-code consists of a letter and three digits (example below N557).
82A-7
ENGINE IMMOBILISER
Code supply 82A
MADE IN GERMANY
Typ: NAVIGATION
Model No:
Serial No:
6200178157
The pre-code is found after the Renault part number (8200 XXX XXX or 7700 XXX XXX) and the letter T
Example above: 8200178157TN557
If the code supplied is not correct, perform another search in Code Management
→ re-enter the VIN
→ click the search button
→ the following screen appears:
with three possible options:
1 Display the radio code available in the database
2 Display the radio code obtained using the VIN and the radio pre-code
3 Find the radio code using its part number reference (old server procedure)
Code Management
Help
CODE MANAGEMENT
A similar search has already been performed for this vehicle in the last 12 hours
2. Display the radio code obtained using the VIN and the radio pre-code
3. Find the radio code using its part number reference (old server procedure)
Code management
versions
82A-8
ENGINE IMMOBILISER
Code supply 82A
→ select option 2
Code Management
Help
CODE MANAGEMENT
Enter the VIN to obtain the radio code. Entry of the pre-code is optional.
VIN
Radio pre-code
Search
Code management
versions
82A-9
ENGINE IMMOBILISER
Code supply 82A
Old radios without pre-code:
If you wish to find a radio code using the radio part number reference (old Minitel and voice server
procedures), select option 3:
Code Management
Help
CODE MANAGEMENT
A similar search has already been performed for this vehicle in the last 12 hours
2. Display the radio code obtained using the VIN and the radio pre-code
3. You wish to find the radio code using its part number reference (old server procedure)
Code management
versions
Example:
Radio part number reference:
Philips = RN + 3 digits + 2 letters + 7 digits
Blaupunkt = BP + 4 digits + 1 letter + 7 digits
Pioneer = RN2006 + 1 letter + 7 digits or 1 letter + 7 digits (old models)
Alpine = AL + 9 digits
Becker = B or E + 7 digits
82A-10
ENGINE IMMOBILISER
Code supply 82A
→ re-enter the VIN
→ enter the radio part number reference (e.g.: Philips = RN679FN3757251 or Blaupunkt = BP8128Y2236316 etc.)
→ click the search button
→ radio code supplied
Code Management
Help
RADIO CODE
You must enter the radio part number. The part number is the string of characters (letters and digits) which appears on the radio
unit. If you cannot obtain this information, please send the Help procedure message to the assistance unit.
VIN
Radio or reference pre-code
Back_Contents
If you cannot obtain the correct code you must send a Help message:
FIELD INPUT
*To: SOSCodes
*From:
Message Text:
VIN: VF1BB1DEA33126191
Description of the problem: The user has already requested the immobiliser
code or the radio code for the vehicle in the last 12 hours and this is incorrect.
Dealership code:
Dealership name:
Contact:
Telephone (optional):
Send Message
→ Complete the mandatory fields; the other fields are completed automatically.
→ Click the Send message button to send the message to Technical Assistance.
82A-11
ENGINE IMMOBILISER
Code supply 82A
2.3 Video network code
Code Management
Help
CODE MANAGEMENT
Code
management
versions
82A-12
ENGINE IMMOBILISER
Code supply 82A
Code Management
Help
CODE MANAGEMENT
Back_Contents
82A-13
ENGINE IMMOBILISER
Code supply 82A
2.4 Tool reprogramming key:
Code Management
Help
CODE MANAGEMENT
Back_Contents
82A-14