The document provides specifications for testing the windings of various types of stator coils, including acceptable resistance ranges for the common-run (WB), common-phase (WG or WR), and run-phase (BG or BR) windings of each type, as well as the minimum high-pot voltage required to test insulation quality. Procedures are given for determining winding balance on one stator type by measuring resistances between terminals while removing jumpers. Resistance measurements must be within specified ranges and differences between measurements must be less than 1 watt.
The document provides specifications for testing the windings of various types of stator coils, including acceptable resistance ranges for the common-run (WB), common-phase (WG or WR), and run-phase (BG or BR) windings of each type, as well as the minimum high-pot voltage required to test insulation quality. Procedures are given for determining winding balance on one stator type by measuring resistances between terminals while removing jumpers. Resistance measurements must be within specified ranges and differences between measurements must be less than 1 watt.
The document provides specifications for testing the windings of various types of stator coils, including acceptable resistance ranges for the common-run (WB), common-phase (WG or WR), and run-phase (BG or BR) windings of each type, as well as the minimum high-pot voltage required to test insulation quality. Procedures are given for determining winding balance on one stator type by measuring resistances between terminals while removing jumpers. Resistance measurements must be within specified ranges and differences between measurements must be less than 1 watt.
The document provides specifications for testing the windings of various types of stator coils, including acceptable resistance ranges for the common-run (WB), common-phase (WG or WR), and run-phase (BG or BR) windings of each type, as well as the minimum high-pot voltage required to test insulation quality. Procedures are given for determining winding balance on one stator type by measuring resistances between terminals while removing jumpers. Resistance measurements must be within specified ranges and differences between measurements must be less than 1 watt.