Professional Documents
Culture Documents
Hydraulic 1
Hydraulic 1
Prototype Hydraulic
Bridge
Summited to:
Summited by:
Rodriguez, Ken
Regatcha, Jervy
Rivas, Jhonell
Flores, Paulo
MOTORIZED HYDRAULIC BRIDGE
I. Introduction
1 Syringes 4pcs
4 Glue 1 pc.
7 Epoxy Steel 1 pc
18 Screw 1pc.
19 Stick 20 pcs.
1. Glue Gun
2. Soldering Iron
4. Scissor
5. Cutter
3. Paste the cutted illustration board to make the foundation of the bridge.
4. Make a hole on the foundation for an entrance and exit of the bridge.
7. Cut the used brown folders to make mini towers at the top of the foundation of bridge.
8. Design the hydraulic Bridge.
Switch off
Switch off
VII. Reflection
Rodriguez, Ken
I have learned that hydraulic prototype bridge moves in order to allow passage
for barges or boats. It uses petroleum-based hydraulic fluids for operations. The
welded hydraulic cylinder, which is part of the bridge is suitable for providing
longetivity for the bridge. While counterbalance valves used will help in carrying
varying loads and hold the bridge firmly in any position.
Regatcha, Jervy
In this Hydraulic bridge prototype I learned how to pump the syringes using 12v
motor to produce force and using switch to set the rotation of the motor and I also
learned that having a hydraulic technologies can used also to our daily lives to
make easier and better.
Rivas, Jhonell
Hydraulic bridge prototype functions using by the machine or engine that produce
a force to one system and transfer to another system using a incompressible
fluid, i learned that it is important to have an industrial hydraulic technologies to
get our life easier and better for example the hydraulic bridge or movable brigde
that has a double function one for minimize the transportation of the shipping
boats and the other is for the vehicles to cross easier and fast.
Flores, Paulo
In this hydraulic prototype bridge, I learned how a hydraulic pump or hydraulic
system function or how it works in an industry or infrastructures. I found out that
it is important to be assured that there is no presence of air inside the hydraulic
because it can affect the hydraulic system to function, loss of horse power and
also loss of fluid