Professional Documents
Culture Documents
Bottom Failure - Annex K - en 14015 - Rev 3
Bottom Failure - Annex K - en 14015 - Rev 3
Shell‐ Bottom Joint Strength Check as per EN 14015 Annex‐K
(For Tank with Shell‐Roof Joint Frangible)
Unstiffened Length
= 29.15476 mm
= 37.4 = 37.4
5
= 7.56 x 10 = 756000
8
= 1.48 x 10 = 148000000
= 0.000625
= 1.00
10
= min [ {242.64X + 0.45) + 0.65Y };1]
= 1.00
= 567.7125 mbar
= 5789.056 mm of water
Acceptibility Criteria
Acceptable
NOTE :-
It should be noted that for stength of shell-bottom joint anchor is provided to keep shell
to bottom joint in tact.Attachement of bolt to shell is calculated and shown that stresses in shell
at attachment point is strong enough. ( Refer anchorage/uplift calculation -
Clause 16 of main calculation)