Professional Documents
Culture Documents
Metalargy MCQ
Metalargy MCQ
(a) 0.3 – 0.4 (b) 0.3 – 0.5 (c) 0.3 – 0.6 (d) None
(a) High strength (b) High corrosion resistance (c) High ductility (d) Brittleness
(a) Graphite flakes (b) Graphite nodules (c) Cementite (d) Carbon does not exist
4. Refractory metal
6. Noble metal
(a) Sand casting (b) Die casting (c) Continuous casting (d) Investment casting
(a) Low density (b) Porosity (c) High damping capacity (d) None
(a) Heating rate (b) Temperature (c) Cooling rate (d) Atmosphere
Answers: 1. c 2. b 3. c 4. b 5. a 6. b 7. d 8. b 9. a 10. C
Choose Appropriate Alternative
ANSWERS
(1) A (2) B (3) C (4) C (5) D (6) D (7) B (8) B (9) C (10) C (11) B (12) C (13) C (14) A (15) C
(16) C (17) B (18) B (19) D (20) C (21) B (22) C (23) D (24) A (25) A (26) C (27) D (28) A (29)
C (30) C (31) B (32) A (33) B (34) D (35) C (36) D (37) C (38) D (39) A (40) C (41) B (42) B
(43) B (44) C (45) D (46) C (47) A (48) B (49) C (50) A (51) D (52) D (53) C (54) D (55) C (56)
B (57) A (58) C (59) B (60) C (61) D (62) B (63) A (64) D (65) D (66) D (67) B (68) D (69) A
(70) B (71) D (72) A (73) B (74) C (75) B (76) A (77) C (78) D (79) A (80) B (81) B (82) B (83)
(84) (85) (86) (87) (88) (89) (90) (91) (92) (93) (94) (95) (96) (97) (98) (99) (100)
Appropriate Alternative
[A] a-4, b-3, c-2, d-1 [B] a-2, b-4, c-1, d-3
[C] a-3, b-2, c-4, d-1 [D] a-4, b-2, c-3, d-1
10. Match correct pairs from Part A and Part B.
[A] a-4, b-3, c-1, d-2 [B] a-3, b-2, c-4, d-1
[C] a-3, b-1, c-2, d-4 [D] a-2, b-4, c-1, d-3
11. Match correct pairs from Part A and Part B.
[A] a-2, b-3, c-1, d-4 [B] a-4, b-2, c-1, d-3
[C] a-3, b-4, c-2, d-1 [D] a-2, b-3, c-1, d-4
12. There are _____ non-metallic elements.
[A] 16 [B] 18 [C] 19 [D] 20
13. The process of preparation of vegetable ghee is called...
[A] hydrogenation [B] hydrolysis [C] oxidation [D] chlorination
14. _____ is a good conductor of electricity.
[A] Diamond [B] Phosphorus [C] Pure water [D] Graphite
15. Oxides of nonmetals are...
[A] acidic [B] basic [C] neutral [D] either acidic or neutral
16. Chlorides of nonmetals are generally...
[A] solid [B] liquid [C] either liquid or gas [D] either solid or gas
17. Hydrogen was discovered by _____ in 1766.
[A] Archemedes [B] Cavendish [C] Fischer and Tropsch [D] Dalton
18. Water gas is...
[A] CO + H2O [B] CO2 + H2 [C] CO + H2 [D] CO2 + H2O
19. Dihydrogen gas easily reduces the oxides of metals...
20. [A] less active than Zn [B] more active than Zn
[C] except Zn [D] of any reactivity
21. The calorific value of _____ is the highest among fuels.
[A] methane [B] hydrogen [C] butane [D] diesel
22. Ammonia is manufactured by ____ process.
[A] Haber's [B] Bayer's [C] Contact [D] Ostwald's
23. _____ and _____ are used as promoters in Haber's process for ammonia.
[A] Al2O3, KNO3 [B] Al2O3, NaCl [C] Al2O3, K2O [D] K2O, KNO3
24. Aqueous solution ofd ammonia acts as...
[A] a weak acid [B] a weak base [C] a strong acid [D] a strong base
25. Nitric acid is manufactured from ammonia by...
[A] Haber's process [B] Frasch process [C] Contact process [D]
Ostwald's process
26. The atomic number of sulphur is...
[A] 14 [B] 15 [C] 16 [D] 17
27. The electronic configuration of sulphur is...
[A] 2,8,4 [B] 2,8,5 [C] 2,8,6 [D] 2,8,7
28. Like carbon,_____ also possesses the property of catenation.
[A] nitrogen [B] oxygen [C] sulphur [D] phosphorus
29. Rhombic sulphur is stable at temperatures...
[A] above 369 K [B] below 369 K [C] above 396 K [D] below 396 K
30. A molecule of sulphur has _____ atoms in it.
[A] 4 [B] 5 [C] 6 [D] 8
31. The melting point of sulphur is...
[A] 369 K [B] 388 K [C] 396 K [D] 423 K
32. _____ is responsible pollutant gas for acid rain.
[A] N2O [B] CO [C] NO [D] SO2
33. Which catalyst is used in oxidation of SO2to SO3?
[A] Ag2O [B] Pt [C] Pd [D] V2O5
34. Sulphuric acid is manufactured by _____ process.
[A] Ostwald [B] Contact [C] Frasch [D] Haber's
35. The formula of oleum is...
[A] H2S2O7 [B] H2SO4 [C] H2S2O3 [D] H3S3O7
36. SO2 is oxidized to SO3 during lead-chamber process by...
[A] NO [B] N2O [C] NO2 [D] N2O3
37. In concentrated sulphuric acid the proportion of water is...
[A] 98% [B] 90% [C] 10% [D] 2%
38. What is the total number of elements known till today?
[A] 110 [B] 114 [C] 99 [D] 119
39. Which of the following is used as electrode in dry cell?
[A] Lead [B] Graphite [C] Coal [D] Copper
40. Which of the following is present in protein, hair, wool, onion and garlic?
[A] Silicon [B] Sulphur [C] Phosphorus [D] Ammonia
41. Which of the following is used in substances called fungicides?
[A] Sulphur [B] Phosphorus [C] Silicon [D] Nitrogen
42. Which of the following nonmetallic elements possesses lustre?
[A] Sulphur [B] Phosphorus [C] Iodine [D] Chlorine
43. What is the molecular formula of Galena?
[A] ZnS [B] CuFeS2 [C] Ca(OH)2 [D] PbS
44. Which property of sulphur is the basis of Frasch process to obtain sulphur?
[A] Low melting point [B] High melting point [C] Low boiling point
[D] High boiling point
45. What is the shape of monoclinic sulphur?
[A] Hexagonal [B] Cubic [C] Needle-like [D] Tetrahedral
46. What is the shape of rhombic sulphur?
[A] Octahedral [B] Tetrahedral [C] Hexagonal [D] Needle-like
47. Which of the following is used in vulcanization of rubber?
[A] Sulphur [B] Phosphorus [C] Ammonia [D] Hydrogen
48. Which of the following gases is combustible?
[A] CO2 [B] H2 [C] O2 [D] NH3
49. Which of the following is the molecular formula of sulphurous acid?
[A] H2S [B] H2SO3 [C] H2SO4 [D] H2S2O7
50. Apart from Contact process, which of the following is a method to
manufacture sulphuric acid?
[A] Haber's process [B] Ostwald's process [C] Lead-Chamber process
[D] Fischr's process
51. What is the proportion of sulphuric acid in dilute sulphuric acid?
[A] 2% [B] 10% [C] 90% [D] 98%
52. Element 'X' reacts with oxygen to give product 'Y', which on dissolving in
water produces acid which turns blue litmus red. Choose the appropriate
statement.
53. [A] X is a nonmetal and Y is a basic oxide. [B] X is a
metal and Y is a basic oxide.
[C] X is a nonmetal and Y is an acidic oxide. [D] X is a metal and Y
is an acidic oxide.
54. When SO2 gas is passed through decanted solution of lime, it becomes milky
due to...
[A] CaSO3 [B] CaCO3 [C] CuSO4 [D] CaSO4
55. In a molecule of sulphur, each atom is bonded to ____ other atoms.
[A] 1 [B] 2 [C] 7 [D] 8
56.
[A] [B][C] [D]
57.
[A] [B] [C] [D]
ANSWERS
(1) C (2) D (3) D (4) A (5) B (6) B (7) B (8) D (9) B (10) D (11) C (12) B (13) A (14) D (15) D
(16) C (17) B (18) C (19) A (20) B (21) A (22) C (23) B (24) D (25) C (26) C (27) C (28) B (29)
D (30) B (31) D (32) D (33) B (34) A (35) C (36) D (37) B (38) B (39) B (40) A (41) C (42) D
(43) A (44) C (45) A (46) A (47) B (48) B (49) C (50) B (51) C (52) A (53) B (54) (55) (56) (57)
(58) (59) (60)
An alloy is a
a. Pure metal
b. Mixture of metals in any proportion
c. Mixture of metals in fixed proportion
d. Mixture of two non metals
(Ans:c)
Bronze is an alloy of
a. Copper and Nickel
b. Copper and iron.
c. Copper and Tin.
d. Copper and Aluminium.
(Ans:c)
Brass is an alloy of
a. Copper and tin
b. Copper and nickel
c. Copper and Aluminium.
d. Copper and zinc
(Ans:d)
Duralumin is an alloy of
a. Aluminium and Copper
b. Aluminium and iron
c. Aluminium and Carbon
d. Aluminium and mercury
(Ans:a)
Manganin is an alloy of
a. Manganese and Aluminium
b. Copper and magnesium
c. Copper, manganese and nickel
d. Manganese, aluminum and iron
(Ans:c)
Pages: 1 2
Multiple choice questions (MCQ) with answers on Lubricants and cutting fluids
September 28, 2015 0
Like us on Facebook
Categories
Automobile Engineering (48)
B.tech CSE Question Papers (6)
B.tech ECE Question Papers (6)
B.tech First / Second Semester Question Papers (6)
B.tech IT Question Papers (4)
B.tech ME Question Papers (6)
Computer Science Engineering (2)
Environmental Science (18)
General Studies (107)
Management Studies (107)
MCQ on ages (1)
MCQ on area and volume (1)
MCQ on Automobile Engineering (23)
MCQ on Electrical engineering (12)
MCQ on Engineering Drawing (3)
MCQ on Fluid machinery / Turbo machines (1)
MCQ on Fluid mechanics (5)
MCQ on General aptitude (13)
MCQ on General awareness (36)
MCQ on General Science (8)
MCQ on height and distance (1)
MCQ on logical reasoning (2)
MCQ on Manufacturing management (26)
MCQ on Manufacturing processes (34)
MCQ on mean, mode and median (1)
MCQ on Mechanical engineering (13)
MCQ on mechanics (4)
MCQ on numbers (1)
MCQ on percentage (1)
MCQ on Power plant engineering (11)
MCQ on profit, loss and discount (1)
MCQ on Refrigeration and air conditioning (6)
MCQ on series (1)
MCQ on simple and compound interest (1)
MCQ on speed, distance and time (1)
MCQ on Strength of materials (11)
MCQ on Theory of machines (14)
MCQ on Thermodynamics (3)
MCQ on work done and time (1)
Mechanical Engineering (129)
PTU Question Papers (5)
Uncategorized (22)
Copyright © 2019 Scholarexpress. All rights reserved.
Theme: ColorMag by ThemeGrill. Powered by WordPress.
This site uses cookies to enhance your browsing experience: Find out more.Okay, thanks
44SHARES