Professional Documents
Culture Documents
07 Ceiling & Lining
07 Ceiling & Lining
No.
(VIII) CEILINGS, LININGS, AND PARTITIONS
7.1 WATTLE/SPLIT BAMBOO CEILING
Providing wattle/ split bamboo ceiling, mud plastered on top and 15 mm sqm
cement plaster in prop. 1 : 4 in two coats - 10 mm first coat and 5 mm
7.1.1 second coat on the bottom, white washed three coats on cement
plastered surface complete (timber ceiling joints to be measured & paid
separately) .
Providing wattle/ split bamboo ceiling, mud plastered on top and 15 mm sqm
cement plaster in prop. 1 : 10 on top and hessian cloth at bottom fitted
with 38 mm x 12 mm 1st class Hollock/ Bonsum Sundi timber beading
7.1.2 chamfered and finished with two coats of enamel painting to the timber
beads complete (timber ceiling joists to be measured and paid separately)
.
Providing wattle/ split bamboo crete ceiling with 25 mm mud plaster on top sqm
and bottom in two coats 15 mm & 10 mm, the final coat being trowel
7.1.4 finished and white washed three coats below (ceiling joists to be
measured and paid separately) .
Providing single layer bamboo-mat ceiling with lattice-pattern jaffri of mesh sqm
size 40 mm x 40 mm made out of bamboo slips of size 5 mm x 2 mm at
7.15 bottom stiffened with bamboo slips of 25 mm x 5 mm size (ceiling joists to
be measured & paid separately) .
7.16 Reparing and refixing turja mat ceiling sqm
Taking out and refixing dhara mat ceiling after reparing as necessary sqm
including changing damaged kamies, dhara, juffry works, bethue bamboo
7.1.7 ceiling joists, as and where necessary, including cleaing the top and
bottom faces of the ceiling as directed complete, including tying with
galvanised wires for fixing in proper position
Rate
(Rs.)
157.55
188.43
190.83
146.36
124.06
32.20
33.25
Item Description of work Unit
No.
7.2 A.C.CEILING
Providing fitting and fixing A.C. building board in ceiling with necessary
nails, wood screws including 1st class local wood 50 mm x 12 mm
7.2.1 (Hollock/ Bonsum/ Sundi) beading including painting two timber beads
complete as directed
(a) 4.00 mm thick sqm
(b) 6.00 mm thick …………. sqm
Providing and fixing asbestos cement sheet cover-strips 50 mm x 12 mm sqm
7.2.2 with bevelled edges over joints with wood screws including mitreing at
junctions
Rate
(Rs.)
269.44
292.15
23.83
Item Description of work Unit
No.
7.3 GYPBOARD CEILING, PARTITION AND WALL LININGS
7.3.1 Supplying, fitting, fixing and painting, where necessary(one coat primer
and two coats of paint) M/F suspended which includes G.I. perimeter
channels of size 0.55mm thick(having one flange of 20mm and another
flang of 30mm and a web of 27mm) along with perimeter of ceiling, screw
fixed to brick wall / patition with the help of nylon sleeves and screws at
610mm c/c. Then suspending G.I. intermidiate channels of size
45mm(0.9mm thick with two flanges of 15mm each) from the soffit at
1220mm c/c with ceiling angle of width 25mm x 10mm x 0.55mm thick
fixed to the soffit with G.I. cleat and steel expansion fasteness.
(A) M/F Frame work with Design type Textured Gypboard tiles 9.5mm thick Sqm
(B) M/F Frame work with Design type Semi perforated Gypboard (Sundance) Sqm
Tiles(NRC value 0.20 with 50mm glass wool mat backing) 12.5mm thick
(C) M/F frame work with Acoustic type Fissured Gypboard (Cratone) Sqm
Tiles(NRC value 0.57 with 50mm glass wool mat backing)12.5mm thick
(D) M/F frame work with Acoustic type Fully perforated Gypboard (Fulltone) Sqm
Tile(NRC value 0.75 with 50mm glass wool mat backing)12.5mm thick
(E) M/F Frame work with Acoustic type slit Gypboard (Louvertone) Tiles(NRC Sqm
value 0.72 with 50mm glass wool mat backing)12.5mm thick
7.3.3 Supplying, fitting, fixing and painting, where necessary(one coat primer
and two coats of paint) pre-coated G.I. angle size 24 x 24 x 80mm thick
fixed to brick wall/ patition at the perimeter of ceiling with nylon sleeves
and screws at 610mm c/c. Then suspending main G.I. 'T' section(bottom
pre-coated) size 24 x 38 x 0.70mm and 3600mm long from soffit in one
directions with the help of Metal Rawl plug, soffit cleat and G.I. rod 4mm
diameters with galvanised steel level clip 1220mm c/c, G.I. cross T section
(bottom pre coated) size 24 x 38 x 0.70mm and 1200mm long insert fixed
into the slots provided in main 'T' at 600mm c/c to form 600mm x 600mm
grid. Then 12.5mm/ 9.5mm/ 8mm thick Gypboard ceiling panels of size
595mm x 595mm can be laid into the grid complete at all levels as
specified and directed. .(Frame for light fittings grill diffusers etc cut out to
be made with the frame of perimeter channel supported suitably and
measured and paid separately as where necessary) (Glass wool to be
measured and paid seperately)
(A) BPB Grid ceiling system with plain Gypboard Tiles 12.5mm thick sqm
(B) BPB Grid ceiling system with plain Gypboard Tiles 9.5mm thick sqm
(C) BPB Grid ceiling system with plain Gypboard Tiles 8.0mm thick sqm
(D) BPB Grid ceiling system with PVC laminated plain Gypboard (Polyshield- sqm
P)Tiles 9.5mm thick
(E) BPB Grid ceiling system with PVC laminated crack Gypboard (Polyshield- sqm
C)Tiles 9.5mm thick
(F) BPB Grid ceiling system with Design type textured Gypboard Tiles sqm
9.5mm thick
(G) BPB Grid ceiling system with Design Wall Paper Gypboard (Paprex
Panel) Tiles
8mm thick sqm
9.5mm thick sqm
(H) BPB Grid ceiling system with Fabric based sound absorb panel (595mm sqm
x 595mm).
(I) BPB Grid ceiling system with Design type semi perforated Gypboard sqm
(Sundance) Tiles 9.5mm thick
7.3.4 Supplying, fitting, fixing and painting, where necessary(one coat primer
and two coats of paint) Metallic frame(M/F) wall lining including
9.5mm/12.5mm thick Gypboard (conforming to I.S.: 2095 - 1982) screw
fixed to the ceiling section( 0.55mm thick having knurled web of 51.5mm
and two flanges of 26mm each with lips of 10.5mm made of G.I. steel)
placed at 610mm centres in perimeter channel(0.55 mm thick having one
flange of 20mm and another flange of 30mm and a web of 27mm made
of G.I. steel) fixed to the floor and ceiling with nylon sleeves and wood
screws at 610mm, c/c and joining the boards and finishing so as to have a
flush look which includes filling and finishing with joining compound joint
paper tape and two coats of Dry wall top caot suitable for Gypboard
complete as specified and directed at all levels(Glass wool to be
measured and paid separately)(For light fittings, providing opening for
doors, windows, ventilators etc. cut out made with the frame of perimeter
channels supported suitably and measured and paid separately as and
when necessary).
(a) M/F Frame work with plain Gypboard Tiles 12.5mm thick sqm
(b ) M/F frame work with plain Gypboard tiles 9.5mm thick sqm
(c) M/F Frame work with Design type Textured Gypboard tiles 9.5mm thick sqm
(d) M/F Frame work with Design type Semi perforated Gypboard sqm
Tiles(NRC value 0.20 with 50mm glass wool mat backing) 12.5mm thick
(e) M/F frame work with Acoustic type Fissured Gypboard Tiles(NRC sqm
value 0.57 with 50mm glass wool mat backing)12.5mm thick
(f) M/F frame work with Acoustic type Fully perforated Gypboard Tile(NRC sqm
value 0.75 with 50mm glass wool mat backing)12.5mm thick
(g) M/F Frame work with Acoustic type slit Gypboard Tiles(NRC value sqm
0.72 with 50mm glass wool mat backing)12.5mm thick
7.3.5 Supplying, fitting, fixing and painting where necessary(one coat primer sqm
and two coats of paints) 97mm thick Gypboard partition wall made of
12.5mm thick. Gypboard mounted on both sides of a rectangular frame
made of 70mm Galvd. Iron studs and 72mm G.I. horizontal channel, fixing
with 25mm dry wall screws, metal rawl plugs using drilling machine with
suitable attachment or mechanically as suitable and finished flush with
joining compounds, joining tapes applying top coats including providing
moulded timber skirting with best quality 1st class local wood timber
planks of 75mm height and 20mm thick at bottom of partition wall etc.
complete as specified and directed) for light fittings providing opening for
door, windows, ventilators etc. cut out made with the frame of perimeter
channel supported suitably to be measured and paid separately when
necessary)
7.3.6 Supplying, fitting and fixing and painting where necessary(One coat
primer and two coats of paints) 97 mm thick Metal stud partition(Single
layer) including one layer of tapered edge 12.5mm thick
Gypboard(conforming to I.S.:2095-1982) screw fixed with dry wall screws
of 25mm at 300mm centre to either side of 70mm studs(0.55mm thick
having one flange of 34mm and another flange of 36mm made of G.I.
steel) with joints staggered to avoid leakage through joints and joining the
square and tapered edge of the boards and finishing so as have a flush
look which includes filling and finishing with joining compound, joint paper
tape and two coats of Dry wall top coat suitable for Gypboard complete as
specified and directed at all levells(for light fittings providing opening for
door, windows, ventilators, etc. cut out made with the fame of perimeter
channel supported suitably to be measured and paid separately when
necessary) .(Glass wool to be measured and paid separately)
7.3.8 Extra for providing Twiga Insul glass wool mat backing with chiken mesh
cover of Twiga fibre glass Insulation as specified and directed at all levels
1087.80
1017.60
1258.90
1267.90
1466.70
1449.80
1471.40
1073.90
1066.60
1051.80
1353.50
1404.70
1161.30
1251.00
1219.80
1920.20
1170.30
Item Description of work Unit
No.
7.4 WOODEN WORKS IN CEILING AND WALLS
7.4.1 Providing and fixing, wood plank ceiling with tongued and grooved joint
leaving a gap of 10mm as per drawing including necessary nails and
wood screws complete(Timber frame work to be measured and paid
separately).
(a) Teak wood plank(20mm thick) sqm
(b) Hollock (25 mm thick) sqm
(c) Bonsum/Sundi Wood plank (25 mm thick) sqm
(d) Gamari timber plank (25mm thick) sqm
7.4.2 Providing and fixing wood plank ceiling with butt and lap joints including
necessary nails and wood screws complete(timber frame work to be
measured and paid separately)
(a) Hollock (25mm thick) sqm
(b) Bonsum/Sundi Wood plank (25 mm thick) sqm
(c) Gamari timber plank (25mm thick) sqm
(d) 2nd clss timber plank (25mm thick) sqm
7.4.3 Providing and fixing plain, square edged cover fillet in ceiling and lining
with wood screws including mitreing a junctions
(a) Teak wood (40mm x 12mm) sqm
(b) Hollock timber plank (40mm x 12mm) sqm
(c ) Extra for making chamfered edges of cover fillets sqm
7.4.4 Providing, fitting and fixing frame work for wall panelling with sqm
Hollock/Bonsum/Sundi battens of size 50mm x 25mm fixed over tapering
plugs made out of trapezoidal section having base 50mm x 50mm at the
bottom and 38mm x 38mm at the top with depth of 50mm embedded in
cement sand mortar prp 1:3 and spaced 450mm to 500mm apart
complete with counter sunk wood screw of 50mm length.
7.4.5 Providing and fixing Teak wood lining with tongue and groove joint leaving
a gap of 10mm as per drawing including fitting and fixing with counter
sunk screws with the frame work complete(frame work will be measured
and paid separately
(i) 12mm thick sqm
(ii) 20mm thick sqm
(iii) 25mm thick sqm
7.4.6 Providing and fixing 1st class local wood Hollock / Bonsum / Gamari /
Sundi lining with tongue and groove joint leaving a gap of 10mm as per
drawing including fitting and fixing with countersunk screws with the frame
work (frame work will be paid separately)
(i) 12mm thick
(a) Hollock sqm
(b) Gamari sqm
(ii) 20mm thick
(a) Hollock sqm
(b) Gamari sqm
(iii) 25mm thick
(a) Hollock sqm
(b) Gamari sqm
7.4.7 Providing and fixing 1st class local wood Hollock / Bonsum / Gamari /
Sundi lining withbutt joints including fitting and fixing with countersunk
screws with the frame work (frame work will be paid separately)
1204.35
754.20
728.25
956.69
874.18
952.96
1084.25
721.01
49.28
33.59
7.00
247.13
1080.34
1599.81
1947.23
701.00
816.70
937.22
1130.06
1162.03
1324.35
550.34
588.16
651.18
756.20
819.22
924.25
884.86
963.64
1094.93
797.23
1263.56
1555.02
647.30
920.38
1091.05
546.46
752.32
880.98
Item Description of work Unit
No.
7.5 CEILING TILES
7.5.1 Supplying, fitting and fixing ceiling tiles of 10mm thick made from Duratuff sqm
Medium density fibre board in size 1200mm x 1200mm x 10mm with Sal
wood timber frame( to be measured and paid separately) leaving an
expansion gap of 3mm with necessary nails, screws etc. including 1st
class local wood(Hollock/Bonsum/Sundi etc.), beading of size 50mm x
12mm complete as directed and specified
(a) With Bajaj exterior grade (one side decorative) 8mm thick sqm
(a) With Bajaj interior grade (one side decorative) 8mm thick sqm
7.9.3 Providing, fitting and fixing in position 38/30mm thick single skin partition
with well seasoned Bonsun/Sundi/Hollock frame in size 75mm x 38mm /
75mmx50mm and fixing 12mm/18mm thick flat pressed melamine faced
pre-laminated graded wood particle boards bonded with phenol
formaldehyde synthetic resin of approved shade as specified and directed
at all levels.
256.23
697.73
907.07
970.29
1062.40
1177.05
1249.08
1185.37
1217.08
1288.85
1158.81
1190.52
1262.29
1221.64
1236.78
821.17
1239.02
522.98
667.68
1391.40
3195.71
3195.71
3564.06
3258.78
1174.72
1278.61
1299.38
1424.05
1286.03
1408.46
1432.95
1502.41
Item Description of work Unit
No.
7.10 Other Types of Ceiling
7.10.1 Providing and fixing hard board sheet ceiling of approved quality with
necessary nails, wood screws including 1st class local wood 50mm x
12mm(Hollock/bonsum/Sundi) beading inluding painting two coats to
timber beads complete as directed(ceiling joists will be measured and paid
separately)
142.07
180.29
205.78
557.89
569.56
575.87
614.28
695.26
240.53
267.44
286.37
311.60
1433.34
1628.91
1890.09
883.22
1135.57
1324.83
791.10
1043.45
1232.71