Professional Documents
Culture Documents
Assignment11 PDF
Assignment11 PDF
Ans=11
2. In the above question The no of TM modes that can be possible are
Ans=4
3. In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, σ = 0, ε=
4𝜀0 ,µ𝑟 = 1 ,𝐻𝑥 = 2 sin(πx/a)cos (3πy/b) sin(π*1011 𝑡 −βz) A/m
The mode of operation is
(a)𝑇𝑀11 (b) 𝑇𝑀13 (c) 𝑇𝐸11 (d) 𝑇𝐸21
4.In the above question the value of cutoff frequency and phase
constant β are
(a) 28.57 GHz and 1718.81 rad/m
(b) 81.55 GHz and 1718.81 rad/m
(c) 28.57 GHz and 718.81 rad/m
(d) 81.55 GHz and 718.81 rad/m
5. In question no3. The value of intrinsic wave impedance is
(a) 377Ω (b) 277Ω (c) 154.7Ω (d) None of these
6. The lower cut-off frequency of a rectangular wave guide with inside
dimensions
(3 4.5 cm) operating at 10 GHz is
(A) 10 GHz. (B) 9 GHz.
(C) 10/9 GHz (d) 10/3 GHz
14. In the above question The phase and group velocities are
respectively
(a) 5.43 × 108 m/s and 1.66 × 108 m/s
(b) 7.43 × 108 m/s and 1.66 × 108 m/s
(c) 5.43 × 108 m/s and 7.66 × 108 m/s
(d) None of these
17.In a rectangular waveguide for which a = 2b, the cutoff frequency for
𝑇𝐸02 mode is 12 GHz, the cutoff frequency for 𝑇𝑀11 mode is
(a)3 GHz
(b) 3√5GHz
(c) 12 GHz
(d) 6√5GHz
18. For 𝑇𝐸30 mode, which of the following field components exist?
(a) 𝐸𝑥 (b) 𝐸𝑦 (c) 𝐸𝑧 (d) 𝐻𝑦