Professional Documents
Culture Documents
02 Calibration of Platform Balance C-02
02 Calibration of Platform Balance C-02
Page 1 of 2
PVT. LTD.
STANDARD OPERATING PROCEDURE SOP No.
QN/CAP/C-02
PROCEDURE FOR CALIBRATION Revision No 002
Title PROCEDURE OF PLATFORM
Issue Date 01.03.2016
BALANCE
Department Production Effective Date 01.04.2016
Area Capsule Department Review on or before 01.04.2018
QA & Copy Made: 2 QN/CAP/C-02
Distribution Supersedes
PRODUCTION
1. OBJECTIVE:
To calibrate the Platform Balance.
2. SCOPE
Calibrating the Platform Balance in the Capsule Manufacturing Area.
3. RESPONSIBILITY
Production chemist, Production Executive, Production Manager.
4. PROCEDURE
4.1 Keep the instrument in a clean and proper place.
4.2 Ensure that the instrument is clean and free from any vibration, air thrust, dust particles and or
moisture.
4.3 Switch on the mains.
4.4 At no load position ascertain that it is indicating ‘ZERO’. Incase of deviation adjust the zero
setting device and eliminate the deviation.
4.5 Ensure that there is no rapid change in temperature of the surroundings.
4.6 Check that the electronic connections are okay and properly secured.
4.7 Check display of the weights against the standard weights & record the readings in the chart.
5. PRECAUTION
5.1 To weigh, place the material in the center of platform & note the digital display.
SIGNATURE
DATE
DESIGNATION PROD. CHEMIST PROD. MANAGER QA MANAGER PLANT MANAGER
QUALITY NEXGEN PHARMACEUTICAL
Page 2 of 2
PVT. LTD.
STANDARD OPERATING PROCEDURE SOP No.
QN/CAP/C-02
PROCEDURE FOR CALIBRATION Revision No 002
Title PROCEDURE OF PLATFORM
Issue Date 01.03.2016
BALANCE
Department Production Effective Date 01.04.2016
Area Capsule Department Review on or before 01.04.2018
QA & Copy Made: 2 QN/CAP/C-02
Distribution Supersedes
PRODUCTION
6. RECORDS / SPECIMEN
6.1 Records the results in the
Calibration record
7. FREQUENCY
Daily.
8. MAINTENANCE / REPAIRS:
If the instrument does not produce required results or its response is poor then it should be
Labeled “FAULTY” and should be repaired or serviced.
9. REVISION HISTORY
9.1 Revision History Table
SIGNATURE
DATE
DESIGNATION PROD. CHEMIST PROD. MANAGER QA MANAGER PLANT MANAGER