i) Thermostat fails ii) Water temperature reaches boiling point iii) Heater unit is operating without water. Withdraw the water only after the green light has switched OFF.
Pre-Operational Checks:
1. Ensure the inlet Valve is in OPEN condition.
2. Ensure the tap at the outlet in CLOSE Position.
Procedure:
Switch ON the power supply to Equipment.
Green neon lamp will glow ON to indicate that water is getting heated. Wait until the water has reached the set temperature. Then the Green light will go OFF. Open the Tap at the Outlet Valve. Withdraw the water. Close the Outlet valve. Switch OFF the Power Supply.