Professional Documents
Culture Documents
EN 10210-1 Hot Finished Structure Hollow Section
EN 10210-1 Hot Finished Structure Hollow Section
Profils creux pour la construction finis à Warmgefertigte Hohlprofile für den Stahlbau
chaud en aciers de construction non alliés e t à aus unlegierten Baustählen und aus
grains fins Feinkornbaustählen
Partie 1 . Conditions techniques de livraison Teil 1. Technische Lieferbedingungen
UDC669.14.018.29-122.4-46:620.1
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~~ ~
Cooperating organizations
O BSI 1994
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN E N * 1 0 2 1 0 - 1 94 3404589 0064522 302 m
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
BS EN 10210-1: 1994
Contents
pw!e
Cooperating organizations Inside front cover
National foreword i
Foreword 2
%Xt of EN 10210-1 3
National annex NA (informative) Committees responsible Inside back cover
National annex NB (informative) Cross-references Inside back cover
National foreword
This British Standard has been prepared under the direction of the Iron and
Steel Standards Policy Committee and is the English language version of
EN 10210-1 1 1994 Hot finished structural hollow sections of non.-alloy and fine
grain stmLctural steels - PLzrt 1 : %chnical delivery requirements, published
by the European Committee for Standardization (CEN).
Along with BS EN 10113 : Parts 1 to 3, BS EN 10155, BS 7613 and BS 7668
this British Standard supersedes BS 4360 : 1990 which is withdrawn.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
i
call the Document Policy Management Group at 1-800-451-1584.
C E N EN*L02LO-L 94 m 3404589 0064523 2V7 m
1)escnptors: Metal sertions, hollow profiles, hot rolled products, structural steels, unalloyed steels, classifications, designation,
delivery condition, chemical composition, mechanical properties, mechanical tests, marking
English version
Profils creux pour la construction finis à Warmgefertigte Hohlprofile für den Stahlbau
chaud en aciers de construction non alliés et à aus unlegierten Baustählen und aus
grains fins - Partie 1: Conditions techniques Feinkornbaustählen - Teil 1: Technische
de livraison Lief erbedingungen
responsibility of a CEN member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and
United Kingdom.
CEN
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*l102lIO-]i 94 m 3404589 00b4524 185 m
Page 2
EN 10210-1 : 1994
Foreword Page
6.10 Tolerances and mass 9
This European Standard has been prepared by the
Technical Committee ECISS/TC 10, Structural steels 7 Inspection and testing 9
- Qualities, the secretariat of which is held by 7.1 Qpes of inspection and testing 9
NNI.
7.2 Types of inspection document 9
This European Standard shall be given the status of
a national standard, either by publication of an 7.3 Product inspection and testing 10
identical text or by endorsement, at the latest by 8 Samples 10
September 1994, and conflicting national standards 8.1 Frequency of tests 10
shall be withdrawn at the latest by September
1994. 8.2 Preparation of samples and test
pieces 11
According to the Internal Regulations of
CENXENELEC, the following countries are bound 9 'kst methods 12
to implement this European Standard: Austria, 9.1 Chemical analysis 12
Belgium, Denmark, Finland, France, Germany,
Greece, Iceland, Ireland, Italy, Luxembourg, 9.2 Mechanical tests 12
Netherlands, Norway, Portugal, Spain, Sweden, 9.3 Visual inspection and
Switzerland and United Kingdom. dimensional check 12
9.4 Non-destructive testing 13
Contents 9.5 Retests, sorting and reprocessing 13
10 Marking 13
page
Annex A (normative) Structural hollow
Foreword 2 sections of non-alloy steels - Chemical
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*L02LO-L 94 3404589 00b4525 O L L =
Page 3
EN 10210-1 : 1994
I ) Until these EURONORMs are transformed into European Standards, they can either be implemented or reference made to the
correslwnding national standards, the list of which is given in annex D to this Part of this European Standard.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN ENIL02LO-L 94 3404589 0064526 T58
Page 4
EN 10210-1 : 1994
- heat treatment terms: as defined in 4.2.2 For non-alloy steel standard hollow sections
prEN 10052; the designation shall consist of:
- hollow section: as defined in EN 10079; - the number of this European Standard
- inspection documents: as defined in EN 10204 (EN 10210);
and their contents as defined in - the capital letter S for structural steel;
EURONORM 168l); - the indication of the minimum specified yield
- normalizing rolling strength for thicknesses I16 mm expressed in
A rolling process in which the final deformation N/mm2;
is carried out in a certain temperature range - the capital letters J R for the qualities with
leading to a material condition equivalent to that specified impact properties at room temperature;
obtained after normalizing so that the specified - the capital letter J and a number O or 2 for the
values of the mechanical properties are retained qualities with specified impact properties at O O C
even after normalizing. and - 20 OC respectively;
- supplier - the capital letter H to indicate hollow sections.
The manufacturer for material supplied ex-mill,
the merchant for material supplied from a
merchant's stock;
') Until these EURONORMs are transformed into European Standards, they can either be implemented or reference made to the
corresponding national standards, the l i t of which is given in annex D to this Part of this European Standard.
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
(EN EN*L02LO-L 94 3404589 0064527 994
Page 5
EN 10210-1 : 1994
4.2.3 For fine grain steel structural hollow sections 5 Information to be supplied by the
the designation shall consist of: purchaser
- the number of this European Standard
(EN 10210-1); 5.1 General
- the capital letter S for structural steel; The following information shall be supplied by the
- the indication of the minimum specified yield purchaser at the time of enquiry and order:
strength for thicknesses I16 mm expressed in a) the quality (mass or total length);
N/mm2; b) the range and type of length (see
- the capital letter N to indicate normalized or prEN 10210-2);
normalized rolled, (see 6.3); c) details of the product form
- the capital letter L for the qualities with HFCHS = hot finished circular hollow sections
specified minimum values of impact energy at a HFRHS = hot finished square or rectangular
temperature of - 50 O C ; hollow sections
- the capital letter H to indicate hollow sections. d) the designation (see 4.2);
4.2.4 The product shall be designated as illustrated e) the dimensions (see prEN 10210-2);
by the following examples: f ) the options required (see 5.2);
Example 1 g) the type of inspection document required
EN 10210 S 275 JO H (see 7.2 and tables 2 and 3).
I 5.2 Options
Number of this A number of options are specified in Parts 1 and 2
standard of this European Standard. Those relevant to this
Part are listed below with appropriate clause
Structural steelI references . In the event that the purchaser does
not indicate his wish to implement any of these
Minimum yield options at the time of enquiry and order the
strength (Nírnz) for supplier shall supply in accordance with the basic
thickness not greater specification.
than 16 mm 1.1 Product analysis shall be carried out .
Impact properties, (see 6.5.1).
27 Joules minimum at 1.2 A maximum carbon equivalent value in
0 oc accordance with table A.2 shall be provided for
non-alloy grades (see 6.5.2).
Hollow section 1.3 The Cr, Cu, Mo, Ni, Ti and V ladle analysis
contents shall be reported in the inspection
certificate or inspection report for non-alloy
Example 2 grades (see 6.5.2).
1.4 A maximum carbon equivalent value in
EN 10210 S 355 NL H accordance with table B.2 shall be provided for
I
Number of this
I I I fine grain steels S275 and S355 (see 6.5.3).
1.5 The ladle analysis limits for grade S460
standard (see 6.5.3) shall be:
a) V + Nb + Ti I 0,22 o/«; and
Structural steel b) MO + Cr I0,30 5%.
Minimum yield 1.6 Impact properties of quality JO and JR shall
strength (N/mz) for be verified by test. This option applies only when
thickness not greater products are ordered with specific inspection and
testing (see 6.6.4).
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
than 16 mm
I
>
Normalized fine grain 1.7 The material shall be suitable for hot dipped
steel with impact galvanized coating (see 6.7.2).
properties, 27 Joules 1.8 Weld repairs to the body of non-alloy
minimum at -50 O C structural steel hollow sections shall not be
permitted (see 6.8.4).
Hollow section 1.9 Specific inspection and testing for non-alloy
grades of qualities J R and JO shall be applied
(see 7.1.1).
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN E N d L 0 2 L O - L 94 W 3Y04589 0064528 820 W
Page 6
EN 10210-1 : 1994
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN E N t 1 0 2 1 0 - 1 94 m 3404589 0064529 767 m
Page 7
EN 10210-1: 1994
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
content in the ladle analysis deviation of the
The products shall be delivered in the conditions product analysia
indicated below: from specified
limits for the
Qualities J R , J O and 52 - hot finished, ladle analysis
Qualities N and NL - normalized. Normalized >!
includes normalized rolled.
N U ï E , Cold formed hollow sections with subsequent heat
treatinent t u obtain eqiiivalent metallurgical conditions to those
obtained by normalizing rolling are deemed to meet the
Si
II I0,20
> 0,20
I0,60
+
+
+
0,02
0,03
0,05
reqiiireinents of this standard.
6.4 Structural hollow section manufacturing + 0,lO
process - 0,05
6.4.1 Structural hollow sections shall be
+ 0,lO
manufactured by a seamless or by a welding
P
non-alloy I0,045 + 0,010
process. Welded sections manufactured by a fine grain I 0,035 + 0,005
continuous process shall not include welds used for
joining lengths of the flat rolled-strip prior to + 0,010
forming the hollow section except as permitted + 0,005
in 9.4.3.
Nb I I 0,060 + 0,010
6.4.2 The fine grain steels given in annex B shall
have a ferritic grain size equal to or finer than 6
v I I0,20 + 0,02
when measured in accordance with Ti I I0,03 + 0,Ol
EURONORM 103. Cr I 5 0,30 + 0,05
6.4.3 Electric resistance including induction
welded hollow sections are normally supplied
Ni I I0,80 + 0,05
without trimming the internal weld bead. Mo I I0,lO + 0,03
6.4.4 For quality assurance requirements see I0,35 + 0,04
EN 10021. If the purchaser specifies quality I0,35 < CU I 0,70 + 0,07
assurance the appropriate standard is EN 29002. N I I 0,025 + 0,002
Altotal I L 0,020 - 0,005
For S235JRH for thicknesses 5 16 mm, the permissible
')
deviation = 0,04!k C, and for thicknesses > 16 5 40 mm the
permissible deviation = 0,05 '%,C.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*IIOC)IIO-L 94 3 4 0 4 5 8 9 O064530 489
Page 8
EN 10210-1 : 1994
When a carbon equivalent value (CEV) is required When aluminium is used as the grain refining
it shall be determined from the ladle analysis using element, the grain size requirement shall be
the formula: deemed to be fulfilled if the ladle analysis shows
Mn Cr + Mo + V Ni + Cu the aluminium content to be not less than 0,020 ‘%I
CEV = C + - +
+
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*LOZILO-L 94 3404589 00b453L 335
Page 9
EN 10210-1 : 1994
6.8.3 For both non-alloy and fine grain structural 7.1.2 Hollow sections of non-alloy steel quality 52
steel hollow sections manufactured by a welded (see annex A) and fine grain steels of qualities N
process repair of the weld shall be permitted. and NL (see annex B) shall be subjected to specific
6.8.4 For non-alloy structural steel hollow sections inspection and testing in accordance with
manufactured by either a seamless or welding EN 10021.
process repair of the body by welding shall be 7.2 Types of inspection document
permitted unless otherwise specified. The
conditions under which, and the extent to which 7.2.1 For products supplied with non-specific
welding repair to the body may be carried out shall inspection and testing a test report (2.2) in
be agreed between the manufacturer and the accordance with EN 10204 shall be provided.
purchaser. The test report shall contain the codes and relevant
Option 1.8 (see 5.2). The purchaser may specify at information in accordance with EURONORM 168.
the time of enquiry and order that repair of the A - Commercial transactions and parties
body by welding shall not be carried out. involved.
For fine grain structural steel hollow sections B - Description of products to which the test
manufactured by either a seamless or welded report applies.
process repair of the body by welding shall not be C - Information on tests as follows:
permitted unless otherwise agreed.
Cll-C13 - Tensile test reports;
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
6.8.5 Welding repair shall be carried out by C71-CQ2- Chemical composition, a ladle
operators qualified in accordance with EN 287-1. analysis.
Welding procedures shall be in accordance with
EN 288, Parts 1 to 3 . The repair welding Z - Authentications that the products comply
procedures shall be covered by the manufacturer’s with the requirements of the order.
quality assurance system. 7.2.2 For products supplied with specific
6.8.6 The repaired hollow section shall comply inspection and testing an inspection certificate
with all the requirements of this European (3.1.A, 3.1.B or 3.1.C) or an inspection report (3.2)
Standard. in accordance with EN 10204 shall be supplied.
6.9 Non-destructive testing of welds The purchaser shall indicate in the enquiry and
order the type of inspection document required
The seam weld of all welded hollow sections
(see 5.lg)).
supplied with specific inspection and testing shall
be subjected to a non-destructive test. NûTE. If an inspection document 3.1.A, 3 . 1 . C or 3.2 is
specified the purchaser should notify the manufacturer of the
6.10 Tolerances and mass address of the organization or person nominated by him to
carry out the inspection and produce the certificate of
6.10.1 Tolerances conformity.
’Merances for hot finished structural hollow The inspection certificate or inspection report shall
sections shall be as specified in Part 2 of this contain the following codes and related information
standard (EN 10210-2). in accordance with EURONORM 168.
6.10.2 Mass A - Commerical transactions and parties
Mass shall be determined using a density of involved.
7,85 kg/dm:’. I3 - Description of products to which the
NUTE. Diinrnsions, sectional properties and inass?unit length inspection document applies.
for a range of standard sizes of hot finished structural hollow
sections are given in Part 2 of this standard (EN 10210-2). The C - Information on tests as follows:
purchaser should preferably select the dimensions of the hollow CO1-CO3 - Location of sample, direction of test
sections from this range of standard sizes. pieces and test temperature;
C10-C13 - Rnsile test - Bst piece shape and
7 Inspection and testing test results;
7.1 Types of inspection and testing C40-C43 - Impact test - Test piece type and
7.1.1 Hollow sections of non-alloy steels in test results;
qualities J R and J O (see annex A) shall be C71-C92 - Chemical composition - The ladle
subjected to non-specific inspection and testing in analysis and if applicable to the product
accordance with EN 10021 unless otherwise analysis.
specified by the purchaser at the time of enquiry Z - Authentication that the products comply
and order. with the requirements of the order.
Option 1.9 (see 5.2). The purchaser may request
specific inspection and testing at the time of
enquiry and order.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
Page 10
EN 10210-1 : 1994
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
given in table 2 for hollow sections of non-alloy
inspection and testing see clause 7.3.2.
steels and in table 3 for hollow sections of fine
grain steels. 8.1.2 For products supplied with specific
inspection and testing the verification of the
7.3.2 Non-speciflc inspection and testing
mechanical properties and product analysis, if
When products are supplied with non-specific applicable, shall be carried out by test unit. A test
inspection and testing, the tests shall be carried unit is defined as a quantity of hollow sections
out by the manufacturer, in accordance with his from one or more cast(s) of the same grade and
own procedures, to demonstrate that products dimensions manufactured by the same process (e.g.
made by the same manufacturing process meet the electric welding, submerged arc welding), and if
requirements of the order. The products tested may applicable in the same heat treatment condition,
not necessarily be the products actually supplied. submitted for acceptance at the same time.
7.3.3 Specific inspection and testing From each test unit one sample shall be taken
When products are supplied with specific sufficient for the preparation of the following test
inspection and testing, the tests shall be carried pieces:
out on the products to be supplied, or on test units - 1 tensile test piece;
of which the product to be supplied is a part, or - 2 sets of 3 impact test pieces;
when applicable on all hollow sections.
- 1 product analysis when required.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~~
CEN EN*<L02LO-L 94 m 3404589 O064533 198 m
Page 11
EN 10210-1 : 1994
Optional
requirements
1 1
6 Product analysis 6.5
19.1
1 One per test unit21
8.1.3 The test unit shall consist of the tonnage of 8.2.2 Location and orientation of samples for
sections as specified in table 4. mechanical tests
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~
pieces with reduced sections are used, the width 2) not more than two of six individual values
shall be 2 5 mm. may be lower than the specified value;
NOTE. Test piece size is dependent on the actual thickness of 3) not more than one of the six individual
the sample and, for circular hollow sections, allowance also
needs to be made for the curvature of the section. values may be lower than 70 '%, of the
specified value;
c) if these conditions are not satisfied the sample
9 Qst methods product is deemed not to comply with this
9.1 Chemical analysis standard and retests may be carried out on the
The elements to be determined and reported shall remainder of the test unit (see 9.5).
be those given in table A . l of annex A, unless 9.3 Visual inspection and dimensional check
option 1.3 is requested (see 5.2) or in table B.l of
annex B. 9.3.1 Visual inspection
The choice of a suitable physical or chemical The hollow sections shall be visually inspected for
analytical method for the analysis shall be at the compliance with the requirements of 6.8.
discretion of the manufacturer. 9.3.2 Dimensional check
In case of disputes, the method used shall be The dimensions of the hollow sections shall be
agreed taking into account the relevant existing checked for compliance with the requirements of
European Standards. Part 2 of this standard (EN 10210-2).
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
C E N EN*LOZLO-L 9 4 3404589 0064535 TbO
Page 13
EN 10210-1: 1994
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
For retests, sorting and reprocessing in accordance
with EN 10021 shall apply with the provision that
if sorting is carried out each individual product
shall be subjected to the test which failed.
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*LOZLO-L 94 m 3404589 0064536 îT7 m
Page 14
EN 1021@1 : 1994
Annex A (normative)
Structural hollow sections of non-alloy
steels - Chemical composition and
mechanical properties
-
According to According to Nominal
EN 10027-1 and EN 10027-2 thickness (mm)
IC 10
s16
> 16
I40
> 40 I65
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*<L02<LO-L 94 m 3404589 0064537 833 m
Page 15
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`--- EN 10210-1 : 1994
4
m
E
E
.Ei
s
Co
?
h
4
u3
E sz m
m
E A Vi c5
.-C
U
J
2 2% m
3 A Vi e
m
5
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
Page 16
EN 10210-1 : 1994
-
9.
I?
v
h
0- I:-
u3
x "-
u3
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
vs k- E6 O
c;
a
ES E
s 2
0- 0- 12-
O O
*!
O 13
FS E
s m
0-
O
m
4
O I c-
8 E 8
8 0-
O
0-
O
hl
1 -i
> E E 0-
g % sE
u3
0-
O
Yi%
x
d
E
o u 3
m h l
8
u 3
/2
0 u3 ou3 o
m m m m
8 I8
o- I ö 8 IZId lz-
òo
u5, e-
O-r
O
CJ-
O
O i
-i
8 8 f
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~~ -
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
'iàble B.3 Mechanical properties
Designation Minimum yield R,,,, in Tensile Minimum percentage Impact properties
N/mm2 strength R,,, elongation L,, = 5,65v'S,,
in N/mm'
According According I Nominal thickness i n mm Nominal thickness in mm Test
to to 5 65 temperature average
EN 10027-1 EN 10027-2 absorbed
and IC 10 energy (J)
for standard
test pieces')
I
>
5
16
40 '40
I6.5 I Longitudinal Transverse O C
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
Page 18
EN 10210-1 : 1994
Annex C (normative)
Location of samples and test pieces
This annex gives information on the location of samples and test pieces for hollow sections (see 8.2.2).
Altemative positions
(on any side except a side
containing the weld in welded
sections)
At any point on
circumference
but in the case
of welded sections
C.l Small sections remote from the
weld
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN ENUL0230-3 94 m 3404589 0064543 2b4
Page 19
EN 10210-1 : 1994
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
Alternative positions
(on any side except a side
containing this weld in
welded sections)
At any point on
circumference
but in the case
of welded sections
remote from the
weld
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN EN*LOZLO-L 94 m 3404589 0064542 1 T O m
Page 20
EN 10210-1 : 1994
!T.B
U
M
2
.Ei
a
E;
&
al
I I I
t:
8
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
o,
s
O
U
al
a
2
al
E
8
1
8
8 8
9 7
* *
0 4
4 4
Ez zE I
z g 3z 5z
h
8 0 0
* b o 3
w w u
z z z
3 3 3 I
4 4 4 4
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
CEN ENMLOZLO-1 94 3404589 O064543 037
Page 21
EN 10210-1: 1994
22
A 5
d *
% &
w w
W
lg
-
w
IiZ
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~ ~
BEAMA Ltd.
British Constructional Steelwork Association Ltd.
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.
~
BSI
Linford Wood
Milton Keynes
MK14 6LE
9406- 7 - lk- F
I' ISBN O 680 22163 6 ISM/12
--``,,,,`,``,,```,`,,`,,,,`,``,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; European Committee for Standardization Document provided by IHS Licensee=Qatar Petroleum (single users)/5943408105,
User=, 02/08/2003 23:51:15 MST Questions or comments about this message: please
call the Document Policy Management Group at 1-800-451-1584.