Professional Documents
Culture Documents
Lab 12
Lab 12
Lab 12
Hydraulics Engineering
In this experiment, the group is tasked to determine the coefficient of discharge of a v-notch weir. It
is the same process as what have done in the previous experiment, but the only difference is instead of a
For the first experiment, the v-notch weir used was 90 degrees in angle. The head over the weir
was noted as the initial head. Note that the measuring device was not pointed, thus may result to error. By
opening the gate valve, the water level slowly increases. And by there, the velocity head just at the
upstream side of the weir was measured and noted as the final head. Taking the difference of final and
initial head, the total head was calculated. The actual flow rate discharge needs to be calculated by getting
was calculated. This theoretical value will be then divided to the actual flow rate that was already converted
CALCULATIONS
CONCLUSION
PHOTOS