Professional Documents
Culture Documents
Idn27943 - SCN1200 F2.5 - Ga+al
Idn27943 - SCN1200 F2.5 - Ga+al
Part Qty./
Description Material
no. system
1. Fender assembly
1.2.2 110
M42 x 4.5P
1.2.1 1.3.1 1.3.2 2 1.1 1 Super Cone Fender, SCN1200 F2.5 1 Rubber + Steel
M42 x 4.5P
1.2 Fender to wharf fixing fastners
SS304 + #45 +
1.2.1 NC3 Anchor, M42 x 4.5P 8
A Q235B / Equiv.
1.2.2 Hex Bolt, M42 x 4.5P, 110mm L 8 SS304 A
1.2.3 'L' Washer (suitable for SCN1200) 8 SS304
1.3 Fender to frame fixing fastners
110
1.3.1 Hex Bolt, M42 x 4.5P, 110mm L 8 SS304
W
1.2.3 1.1 DETAIL A DETAIL B 1.3.2 Round Washer for M42
(OD78 x ID45 x 7 Thk.) 8 SS304
Fender to wharf fixing Fender to frame fixing
2 Frontal Frame 1 Q345B/Equiv. (Painted)
125 470 20
E
3 Facing Pad, 30 mm Thk, Colour : Black 1 Set UHMW-PE
62.5 9 6 20
80 Tension Chain System 2 Sets Gr.Q345B
U3, Gr. S, Gr. 8.8, Gr.8,
4
I
(Open link, Ø42 x 5D) / Equiv. (HDG)
Weight Chain System 2 Sets Gr.Q345B
U3, Gr. S, Gr. 8.8, Gr.8,
5 (Open link, Ø28 x 4D) / Equiv. (HDG)
1200
156
7 'U' Anchor for weight chain, Ø36 2 SS304 B
V 189
+2
0
R58.5
+2
0
390
SQ. 65
104
39
510
210
46
Performance Table
CL Fender
DETAIL C Fender Type SCN1200 F2.5
E
16
Tension chain 'U' anchor detail Percentage Deflection 72 %
1.2.3 'L' Washer
Fender Energy 935.0 kN m
R
+5.00m Top of Wharf Performance Tolerance 10%
3% or 2mm
4 6 Dimensional tolerance (whichever is the greater)
30°
+4.50m
Top of frame C
200
R
3
B
O
+3.00m
CL Fender
F
4500
D 1.1
D
5
A
+1.15m
HWS
+0.00m
Bottom of frame /
LWS
2000
FOR APPROVAL
DRAWN Varun.Tripathi
E Tel: +65 6268 8005
DESIGNED Trelleborg Marine Systems Asia Pte. Ltd. Fax: +65 6268 6629
Note : 4 Jalan Pesawat E-mail: tms.asia@trelleborg.com
- All dimensions are in mm otherwise as specified. CHECKED Kinnar.Shah Singapore 619362 Web: www.trelleborgms.com E
- Minimum edge distance from nearest anchor shall be 1.5 times of anchor embedment depth or
else reinforcement shall be provided as per ACI 318 RD 5.2.9. CHECKED MARINE SYSTEMS
- All anchors to be welded with rebar in accordance with ACI318.
APPROVED TITLE:- GENERAL ARRANGEMENT DRAWING NO :-
COMMERCIAL IN CONFIDENCE “This document contains confidential information. All SCN1200 F2.5
rights (including copyright, confidential information, trade secrets and design rights) are Rev.
A 15/06/17 ISSUED FOR APPROVAL VGT SCALE NTS IDN27943-1M01
owned by Trelleborg AB. No use or disclosure is to be made without prior written
permission of Trelleborg AB. Copyright 2017 Trelleborg AB. All rights reserved.” Rev. DATE DESCRIPTION REV. BY APR. BY ZONE SIZE A3 PROJECT:- UIC SHEET: 1 OF 1 Ver.: 4
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
156
IE
144
1172 ±2
B
878 ±2
B
V
+3.00m
CL Fender
E 875 ±1
619 ±1
45°
45° PCD1750 ±2
R
8 Nos, M42 NC3 Anchors,
CL Fender
C
R
619 ±1
875 ±1
O
ANCHOR LAYOUT
F
D
D
FOR APPROVAL
DRAWN Varun.Tripathi
E Tel: +65 6268 8005
DESIGNED Trelleborg Marine Systems Asia Pte. Ltd. Fax: +65 6268 6629
Note : 4 Jalan Pesawat E-mail: tms.asia@trelleborg.com
- All dimensions are in mm otherwise as specified. CHECKED Kinnar.Shah Singapore 619362 Web: www.trelleborgms.com E
- Minimum edge distance from nearest anchor shall be 1.5 times of anchor embedment depth or
else reinforcement shall be provided as per ACI 318 RD 5.2.9. MARINE SYSTEMS
CHECKED
- All anchors to be welded with rebar in accordance with ACI318.
APPROVED TITLE:- ANCHOR LAYOUT DETAIL DRAWING NO :-
COMMERCIAL IN CONFIDENCE “This document contains confidential information. All SCN1200 F2.5
rights (including copyright, confidential information, trade secrets and design rights) are Rev.
A 15/06/17 ISSUED FOR APPROVAL VGT SCALE NTS IDN27943-1T01
owned by Trelleborg AB. No use or disclosure is to be made without prior written
permission of Trelleborg AB. Copyright 2017 Trelleborg AB. All rights reserved.” Rev. DATE DESCRIPTION REV. BY APR. BY ZONE SIZE A3 PROJECT:- UIC SHEET: 1 OF 1 Ver.: 4
1 2 3 4 5 6 7 8