This document provides instructions for modifying the dashboard of a BMW 7 Series E65 in two ways: 1) By opening the entire dashboard carefully to locate and clip the EPROM memory chip, checking pin 1 as shown in photos, or 2) By removing just the back plastic dashboard cover, locating points on the main board to solder cable leads as shown in photos.
This document provides instructions for modifying the dashboard of a BMW 7 Series E65 in two ways: 1) By opening the entire dashboard carefully to locate and clip the EPROM memory chip, checking pin 1 as shown in photos, or 2) By removing just the back plastic dashboard cover, locating points on the main board to solder cable leads as shown in photos.
This document provides instructions for modifying the dashboard of a BMW 7 Series E65 in two ways: 1) By opening the entire dashboard carefully to locate and clip the EPROM memory chip, checking pin 1 as shown in photos, or 2) By removing just the back plastic dashboard cover, locating points on the main board to solder cable leads as shown in photos.
1. USE CABLE C4, OPEN ALL DASH, PLEASE MAKE IT CAREFULLY, THEN LOCATE EPROM MEMORY, AND CLIP IT CHECKING PIN 1 AS SHOWS TO US BELOW PHOTOS: 2. USE C7 CABLE, WE ONLY NEED TO REMOVE BACK PLASTIC COVER OF DASH, LOCATE POINTS IN THE MAIN BOARD AND SOLDER CABLE LEADS AS SHOWS TO US BELOW PHOTO: