Professional Documents
Culture Documents
Civil Test - Sanjay
Civil Test - Sanjay
Company Name:
QC INSPECTOR WRITTEN TEST
Question #
A
1
Ans
2
Ans
3
Ans
4
Ans
5
Ans
6
Ans
7
Ans
8
Ans
9
Ans
10
Ans
11
Ans
12
Ans
13
Ans
14
Ans
15
Ans
16
Ans
17
Ans
18
Ans
19
Ans
20
Ans
21
Ans
22
Ans
23
Ans
24
Ans
25
Ans
B
26
Ans
27
Ans
28
Ans
29
Ans
30
Ans
31
Ans
32
Ans
33
Ans
34
Ans
35
Ans
36
Ans
37
Ans
38
Ans
39
Ans
40
Ans
C
41
42
43
44
45
46
me Of Inspector: Date: Time:
mpany Name:
QC INSPECTOR WRITTEN TEST
Description of question
Select the one correct answer: A, B, C, or D.
Convert the concrete strength of 35MPa in to PSI.
A) 5000 PSI B) 6000 PSI C) 4000PSI D) 2000 PSI
Saudi Aramco Standard for Excavation & Backfilling
A)SAES-A-114 B) SAES-Q-001 C) SAES-M-100 D) SAES-A-113
Clear space of all sides excavation should be
A) 1000mm B) 600 MM C) 800 MM D) 300 MM
What is the maximum spacing for control joints in concrete paving slabs?
A) 5.0M B) 7.0 M C) 6.0M D) 8.0M
What is the maximum free fall height allowed for concrete placement?
A) 1.0M B)2.0M C) 1.5M D) 0.80M
What is the maximum limit of TDS in concrete mixing water?
A)500 PPM B) 1000 PPM C) 10000 PPM D) 100 PPM
The depth of the hole for Nuclear density method shall be no greater than deep
A) 150mm B)450mm C) 300mm D) 250mm
At least one FDT test to be conducted while backfilling under foundations having area
A) 70 Sq m B)90 Sq m C) 180 Sq m D)180 Sq m
What is the SAIC number for soil compaction testing?
A)SAIC-A-1005 B) SAIC-A-1004 C) SAIC-A-1006 D) SAIC-1002
What is the maximum size of stone is allowed in select fill material?
A) 50mm B)100mm C) 62mm D)75mm
What is the maximum fill thickness of a layer allowed by SAES-A-114.
A) 250mm B) 150mm C)200mm D) 100mm
What is the minimum compaction percentage required under foundations with static load more than 320KPafor
cohesionless soils
A) 95% B) 90% C) 85% D) 70%
The Tensile strength of deformed steel used in Saudi Aramco Projects is….
A) 322 Mpa B) 502 Mpa C) 280 Mpa D) 422 Mpa
Surface Coating of Concrete shall not be start till the moisture content of the strusture is less than…
A) 3% B) 5% C)4% D)^%
Saudi Aramco Specification 09-SAMSS-097 is required to refer for…….
A)Concrete masonry blocks B) PVC Pipes C) FBE Coated Reinforcement Rebar D) Ready Mix Portland Cement Concrete
When base course finished surface checked by 3 m straight edge, what is the maximum elevation deviation
accepted?
A)± 0mm B) ± 2mm C) ± 6mm D)± 3mm
What is the rate of prime coat application testing?
A) 10000M² B) 20000M² C) 5000M² D) 6000M²
What is the minimum atmospheric temperature should be for prime coat application?
A) 20 °C B) 5°C C)16°C D) 23°C
What is the prime coat temperature limits for MC-250?
A)65°C to 105°C B) 50°C to 80°C C) 55°C to 85°C D) 35°C to 65°C
What is the rate of application for tack coat?
A) 0.65 L/M² B)0.25 L/M² C) 1.75 L/M² D) 0.5 L/M²
What is the temperature limits for hot mix asphalt?
A) 90 °C to 139 °C B) 139 °C to 163 °C C) 75 °C to 125 °C D) 125 °C to 175 °C
How Much is the concrete cover required for permanently exposed surfaces to earth
A) 20MM B) 100MM C) 75MM D) 50MM
What is the minimum time for roof flood testing?
A) 48 Hours B) 24 Hours C) 50 Hours D) 10 Hours
What is the minimum compressive strength for CMU mortar ?
A) 2000PSI B) 1000PSI C) 1800 PSI D) 1900 PSI
Water curing shall be continuous until the concrete has reached how many percentages of the Specific strength
A) 50% B) 85% C)100% D) 70%
Write the answer of below questions.
What is the passing percentage of select fill in # 200 sieve?
What ASTM number used for maximum Index Density and Unit Weight of Soils Using a Vibratory Table?
What is the SAES number for Saudi Aramco Security & General Purpose Fencing
What is the Maximum cement content (Includes Micro Silica) for 4000PSI concrete
The Minimum required number of concrete cylinder sample for Compressive strength shall be
What type of coating material required for concrete Buried/exposed Directly to the earth.
What is the SATIP number for cast in place cement concrete?
What is the SAIC number for cast in place concrete form work inspection?
13
Ans
14
Ans
15
Ans
16
Ans
17
Ans
18
Ans
19
Ans
20
Ans
21
Ans
22
Ans
23
Ans
24
Ans
25
Ans
B
26
Ans
27
Ans
28
Ans
29
Ans
30
Ans
31
Ans
32
Ans
33
Ans
34
Ans
35
Ans
36
Ans
37
Ans
38
Ans
39
Ans
40
Ans
C
41
42
43
44
45
46
me Of Inspector: Date: Time:
mpany Name:
QC INSPECTOR WRITTEN TEST
Description of question
Select the one correct answer: A, B, C, or D.
Convert the concrete strength of 35MPa in to PSI.
A) 5000 PSI B) 6000 PSI C) 4000PSI D) 2000 PSI
Saudi Aramco Standard for Excavation & Backfilling
A)SAES-A-114 B) SAES-Q-001 C) SAES-M-100 D) SAES-A-113
Clear space of all sides excavation should be
A) 1000mm B) 600 MM C) 800 MM D) 300 MM
What is the maximum spacing for control joints in concrete paving slabs?
A) 5.0M B) 7.0 M C) 6.0M D) 8.0M
What is the maximum free fall height allowed for concrete placement?
A) 1.0M B)2.0M C) 1.5M D) 0.80M
What is the maximum limit of TDS in concrete mixing water?
A)500 PPM B) 1000 PPM C) 10000 PPM D) 100 PPM
The depth of the hole for Nuclear density method shall be no greater than deep
A) 150mm B)450mm C) 300mm D) 250mm
At least one FDT test to be conducted while backfilling under foundations having area
A) 70 Sq m B)90 Sq m C) 180 Sq m D)180 Sq m
What is the SAIC number for soil compaction testing?
A)SAIC-A-1005 B) SAIC-A-1004 C) SAIC-A-1006 D) SAIC-1002
What is the maximum size of stone is allowed in select fill material?
A) 50mm B)100mm C) 62mm D)75mm
What is the maximum fill thickness of a layer allowed by SAES-A-114.
A) 250mm B) 150mm C)200mm D) 100mm
What is the minimum compaction percentage required under foundations with static load more than 320KPafor
cohesionless soils
A) 95% B) 90% C) 85% D) 70%
The water content of Aggregate base course material shall be maintained within…… of the optimum moisture
content as per D-1557 or AASHTO T-180 during compaction.
A)± 0.5% B) ± 1.5% C) ± 3% D)± 2%
Surface Coating of Concrete shall not be start till the moisture content of the strusture is less than…
A) 3% B) 5% C)4% D)^%
Saudi Aramco Specification 09-SAMSS-097 is required to refer for…….
A)Concrete masonry blocks B) PVC Pipes C) FBE Coated Reinforcement Rebar D) Ready Mix Portland Cement Concrete
When Aggregate base course finished surface checked by 3 m straight edge, what is the maximum elevation
deviation accepted?
A)± 0mm B) ± 2mm C) ± 6mm D)± 3mm
What is the rate of prime coat testing?
A) 10000M² B) 20000M² C) 5000M² D) 6000M²
What is the minimum atmospheric temperature should be for prime coat application?
A) 20 °C B) 5°C C)16°C D) 23°C
What is the prime coat temperature limits for MC-250?
A)65°C to 105°C B) 50°C to 80°C C) 55°C to 85°C D) 35°C to 65°C
What is the maximum rate of application for tack coat?
A) 0.65 L/M² B)0.25 L/M² C) 1.75 L/M² D) 0.5 L/M²
What is the temperature limits for hot mix asphalt?
A) 90 °C to 139 °C B) 139 °C to 163 °C C) 75 °C to 125 °C D) 125 °C to 175 °C
How Much is the concrete cover required for permanently exposed surfaces to earth
A) 20MM B) 100MM C) 75MM D) 50MM
What is the minimum time for roof flood testing?
A) 48 Hours B) 24 Hours C) 50 Hours D) 10 Hours
What is the minimum cylinders shall be taken for compressive strength.
A) 2000PSI B) 1000PSI C) 1800 PSI D) 1900 PSI
Water curing shall be continuous until the concrete has reached how many percentages of the Specific strength
A) 50% B) 85% C)100% D) 70%
Write the answer of below questions.
What is the passing percentage of select fill in # 200 sieve?
What ASTM number used for maximum Index Density and Unit Weight of Soils Using a Vibratory Table?
What is the SAES number for Saudi Aramco Security & General Purpose Fencing
What is the Maximum cement content (Includes Micro Silica) for 4000PSI concrete
The Minimum required number of concrete cylinder sample for Compressive strength shall be
What type of coating material required for concrete Buried/exposed Directly to the earth.
What is the SAIC number for cast in place concrete form work inspection?
13
Ans
14
Ans
15
Ans
16
Ans
17
Ans
18
Ans
19
Ans
20
Ans
21
Ans
22
Ans
23
Ans
24
Ans
25
Ans
B
26
Ans
27
Ans
28
Ans
29
Ans
30
Ans
31
Ans
32
Ans
33
Ans
34
Ans
35
Ans
36
Ans
37
Ans
38
Ans
39
Ans
40
Ans
C
41
42
43
44
45
46
C
36
Ans
37
Ans
38
Ans
39
Ans
40
Ans
41
Ans
42
Ans
43
Ans
44
Ans
45
Ans
46
Ans
47
Ans
48
Ans
C
49
50
me Of Inspector: Date: Time:
mpany Name:
QC INSPECTOR WRITTEN TEST
Description of question
Select the one correct answer: A, B, C, or D.
Convert the concrete strength of 35MPa in to PSI.
A) 5000 PSI B) 6000 PSI C) 4000PSI D) 2000 PSI
Saudi Aramco Standard for Excavation & Backfilling
A)SAES-A-114 B) SAES-Q-001 C) SAES-M-100 D) SAES-A-113
Clear space of all sides excavation should be
A) 1000mm B) 600 MM C) 800 MM D) 300 MM
What is the maximum spacing for control joints in concrete paving slabs?
A) 5.0M B) 7.0 M C) 6.0M D) 8.0M
What is the maximum free fall height allowed for concrete placement?
A) 1.0M B)2.0M C) 1.5M D) 0.80M
What is the maximum limit of TDS in concrete mixing water?
A)500 PPM B) 1000 PPM C) 10000 PPM D) 100 PPM
The depth of the hole for Nuclear density method shall be no greater than deep
A) 150mm B)450mm C) 300mm D) 250mm
At least one FDT test to be conducted while backfilling under foundations having area
A) 70 Sq m B)90 Sq m C) 180 Sq m D)180 Sq m
What is the SAIC number for soil compaction testing?
A)SAIC-A-1005 B) SAIC-A-1004 C) SAIC-A-1006 D) SAIC-1002
What is the maximum size of stone is allowed in select fill material?
A) 50mm B)100mm C) 62mm D)75mm
What is the maximum fill thickness of a layer allowed by SAES-A-114.
A) 250mm B) 150mm C)200mm D) 100mm
What is the minimum compaction percentage required under foundations with static load more than 320KPafor
cohesionless soils
A) 95% B) 90% C) 85% D) 70%
The water content of Aggregate base course material shall be maintained within…… of the optimum moisture
content as per D-1557 or AASHTO T-180 during compaction.
A)± 0.5% B) ± 1.5% C) ± 3% D)± 2%
Surface Coating of Concrete shall not be start till the moisture content of the strusture is less than…
A) 3% B) 5% C)4% D) 1%
Saudi Aramco Specification 09-SAMSS-097 is required to refer for…….
A)Concrete masonry blocks B) PVC Pipes C) FBE Coated Reinforcement Rebar D) Ready Mix Portland Cement Concrete
When Aggregate base course finished surface checked by 3 m straight edge, what is the maximum elevation
deviation accepted?
A)± 0mm B) ± 2mm C) ± 6mm D)± 3mm
What is the rate of prime coat testing?
A) 10000M² B) 20000M² C) 5000M² D) 6000M²
What is the minimum atmospheric temperature should be for prime coat application?
A) 20 °C B) 5°C C)16°C D) 23°C
What is the prime coat temperature limits for MC-250?
A)65°C to 105°C B) 50°C to 80°C C) 55°C to 85°C D) 35°C to 65°C
What is the maximum rate of application for tack coat?
A) 0.65 L/M² B)0.25 L/M² C) 1.75 L/M² D) 0.5 L/M²
What is the temperature limits for hot mix asphalt?
A) 90 °C to 139 °C B) 139 °C to 163 °C C) 75 °C to 125 °C D) 125 °C to 175 °C
How Much is the concrete cover required for permanently exposed surfaces to earth
A) 20MM B) 100MM C) 75MM D) 50MM
What is the minimum time for roof flood testing?
A) 48 Hours B) 24 Hours C) 50 Hours D) 10 Hours
The minimum required number of concrete test cylinders for strength tests shall be:Specify the Days for Testing
1) 3Nos 2) 1 No. 3) 4 nos. 4) 6 Nos.
Water curing shall be continuous until the concrete has reached how many percentages of the Specific strength
A) 50% B) 85% C)100% D) 70%
Write the answer of below questions.
What is the passing percentage of select fill in # 200 sieve?
What ASTM number used for maximum Index Density and Unit Weight of Soils Using a Vibratory Table?
Concrete ingredients are mixed by weight or by volume in a ready mix concrete batch plant?
What is the Maximum cement content (Includes Micro Silica) for 4000PSI concrete
Which ASTM standard for SAND CONE METHOD or Nuclear Method shall be used In-place density.
What type of coating material required for concrete Buried/exposed Directly to the earth.
What is the SAIC number for cast in place concrete form work inspection?
What ASTM number used for maximum Index Density and Unit Weight of Soils Using a Vibratory Table?
What is the SAES number for Saudi Aramco Security & General Purpose Fencing
Which ASTM standard for SAND CONE METHOD or Nuclear Method shall be used In-place density.
What is the SAIC number for cast in place concrete form work inspection?
The Fill placement is completed 1000mm in one time, Prepare NCR for the non compliance.
Marks