Professional Documents
Culture Documents
Manual Equipo Minero Sandvik PDF
Manual Equipo Minero Sandvik PDF
Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM
TECHNICAL SPECIFICATION
Sandvik TH550 TH550-14 (15.02.2011) 2/3
Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM
TECHNICAL SPECIFICATION
Sandvik TH550 TH550-14 (15.02.2011) 3/3
Brake hydraulic tank capacity 100 liters (26.4 gal) (heaped, SAE J1363), width 3260/3480mm.
Automatic brake activation (ABA) • Emergency steering (CEN).
Standard Lubrication system • Electrical retarder TELMA.
Centralized automatic lubrication • Exhaust brake “Jake Brake”
Electrical equipment • Gear limit TBA
Alternator 2 pcs, 28 V 140A Bosch • Fire suppression system ANSUL, two tank system with 8
Batteries 2 pcs, 12 V 160 Ah nozzles (CEN) including auto engine shut down.
Starter 24 V • Fire suppression system ANSUL, two tank system with 8
Driving lights 4 pcs in front (H3 65W) nozzles (CEN), CHECKFIRE including auto engine shut
4 pcs in rear (H3 65W) down.
Working light 1 pc (H3 65W) • Sandvik FS1000 fire suppression system including auto
Parking lights 4 pcs shut down
Brake lights 2 pcs • Reverse camera
Blinkers 4 pcs • Mirrors defrost
Instrumentation 5.7 in LCD display • Windows defrost
Safety equipment • Cabin heater (with air conditioning)
Signal horn for box up • Cyclone for air conditioning
Hand held fire extinguisher 12 kg • Cover grills for lights
Engine shut down with low hydraulic or brake oil level • Wiggins fuel fill system
Reverse alarm (CEN) • Wiggins fluid fill set (hydr., transmission and engine oil)
Lockable main switch • Jump start (CAT)
External shutdown • Flashing beacon
Neutral brake • Foldable safety rails
Others • Accordance with CE-norms (CEN).
Decal language EU-languages • Disassembly needed shaft dim: TBA.
Standard manuals • CatBase/LinkOne spare part manuals and additional
Instructions Manual Instructions, Workshop, Spare part manuals, ToolMan CD’s
-Operator's Manual EU-languages are available.
-Maintenance Manual EU-languages • Control system tool kit
Parts Manual English
Service and Repair Manual English
Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM