Professional Documents
Culture Documents
Dx225lca PDF
Dx225lca PDF
DX225LCA
Engine Power SAE J1995, gross 115 kW (154 HP) @ 1,900 rpm
SAE J1349, net 110 kW (148 HP) @ 1,900 rpm
Operational Weight 21,500 kg (47,399 lb)
Bucket Capacity (SAE/PCSA) 0.51 ~ 1.51m3 (0.67 ~ 1.98yd3)
Doosan DX225LCA Hydraulic Excavator :
A New Model with Novel Features
7 Inch Monitor Tropical Hydraulic Oil (ISO VG 68) Heavy-duty Front Advanced HD cabin (Optional)
- New, user-friendly LCD color monitor with - Maintain best performance of your machine by - Overall reinforcement of steel plate by - ROPS, FOPS optional
full access to machine settings and keeping optimum viscosity in tropical area. increasing thickness. (Side plate 20%, - The latest interior
maintenance data. Bottom 15%) (MP3, Joystick, Air suspension seat, etc.)
- Operator can see rear view through new - Reinforced boom-end bracket and
monitor (If customer selects rear view enlarged arm-center boss
camera option) - Enlarged arm-end boss and
reinforcement plate with abrasion-
resistant beams.
Pre cleaner
- Install rotor type pre-cleaner (Donaldson Top
Spin 5”). So filtering efficiency 20% increased
Water separator
- Fuel water separator filters water in fuel and
enhance engine’s durability and reduce quality
problem caused by water in fuel (Extra Filter +
Pre Filter + Main Filter)
Advanced Undercarriage
Strengthen Sprocket structure and tooth
- Structure to prevent debris
* Option spec info is included to the images contained in this material and may not be the same with the actual specs.
Performance & Productivity
The performance of the DX225LCA has a direct effect on its productivity. Its new improved Doosan ENGINE(DB58TIS)
engine and new EPOSTM controlled hydraulic system have combined to create an unbeatable
hydraulic excavator, with a cost/performance ratio that makes the DX225LCA even more
appealing.
1 2 3
3 travel device
In house travel device provides simple internal structure
and increases efficiency of the performance.
Thicker sprocket minimizes incoming debris and provides
higher durability.
Durability & Reliability
The reliability of an item of plant contributes to its overall lifetime operating costs. HEAVY DUTY BOOM & ARM BOOM (STANDARD)
DOOSAN uses computer-assisted design techniques, highly durable materials and
structures then test these under extreme conditions.
Center Boss Plate
A
- Size increased 40%
B Boom End Dracket
G - Single piece of casting type
E
Arm Back Plate
- Equipped add. Reinforced bar
F
Boom Plate
- Increase boom foot height and
decrease width
- Increase plate thickness 15%
1 2 3
RELIEF CUTOFF The pump continues to supply flow even when the maximum
pressure on the system is reached due to severe working
environments and large workloads. Relief cutoff technology of
DX225LCA prevents transfer of unnecessary flow to maintain
Cylinder
powerful working level at the maximum value while reducing
consumption of fuel.
Hydraulic Pump
Saves
20~30%
of Fuel
OPTIMIZED LEVER CONTROL & When operator takes a break and leaves the control joystick
AUTO IDLE fixed, both of the engine and the pump are kept in standby mode
and prevents unnecessary fuel consumption.
100 % 50 %
More space, better visibility, air conditioning, a very comfortable seat. These are all elements Monitor
that ensure that the operator can work for hours and hours in excellent conditions.
Control panel
A Standard screen
B Anti-theft protection
A B C
C Filter/oil information
D Operation history
E Flow rate control
D E F
F Contrast control
1 2
1 2
3 4 5
6 7 8
* Option spec info is included to the images contained in this material and may not be the same with the actual specs.
Telematics Service (Optional) Global Parts Network
TELECOMMUNICATIONS Global PDC (Parts Distribution Center) Network
Data flow from machine to web Doosan provides fast and precise worldwide delivery of genuine Doosan parts through its global PDC (parts distribution center) network.
Telematics Service Terminal Telecommunication Doosan Telematics Service Web Global network
Telematics Service GPS, EPOSTM data is sent to Doosan, Dealer, Customer The global network of the GPDC (Global Parts Distribution Center) maximizes its supply rate by making sure that each center is stockpiled with all
terminal is installed to designated server by GSM, can easily monitor the GPS, the critical parts required for businesses in its area. The network also minimizes the time and costs required for parts delivery by positioning PDCs
machine / connected to Satellite EPOSTM data from Core close to major markets around the world. Doosan PDCs communicate with customers in their time zone, informing them that they are open for
EPOSTM telecommunication Telematics Service web operation, and deliver parts to them as early as possible.
FUNCTIONS Telematics Service BENEFITS The Global Parts PDCs had been set up as shown below, including Mother PDC in Ansan, Korea. The seven other PDCs include one in
Doosan Telematics Service provides various functions to support your great performance Distribution Center Network China (Yantai), one in the USA (Chicago), one in Brazil (Campinas), two in Europe (Germany and the UK), one in the
Doosan and dealer support customers to improve
work efficiency with timely and responsive services Middle East (Dubai), and one in Asia (Singapore).
Customer
Improve work efficiency
· Timely and preventive service
·Improve operator’s skills by comparing work pattern
Germany
GPS Fuel information Preventive maintenance · Manage fleet more effectively Doosan Intemational UK LTD.
Dealer
Better service for customers
· Provide better quality of service
· Maintain machine value
Operation hours Fault code/warning · Better understanding of market needs
Doosan
Responsive to customer’s voice
· Utilize quality-related field data
· Apply customer’s usage profile to deveping new
ADT Productivity Reports machine
Maintenance parts
·Preventive maintenance by item
All models Tier 4 only All models PDC
replacement cycle Benefit
·Fault code
Fault code/ Warning All models Tier 4 only All models
·Machine Warnings on Gauge Panel
·Fuel level All models
Fuel information Tier 4 only All models
·Fuel consumption Tier 4 only Distribution Cost Maximum Parts Shortest Real-time service Minimum
·Dump tonnage Reduction supply rate distance/time support downtime
Dump capacity N/A N/A All models
·Count of Work Cycle parts delivery
Attachments
Heavy Construction Bucket, which is also called Heavy Duty bucket, is the most commonly used bucket in the
construction equipment market and is designed mainly for use in heavy construction but also used in low density
mining and quarry application.
Bucket General Purpose Bucket Heavy Duty Bucket Severe Duty Bucket
Capacity (SAE/PCSA)
Hinge Adapter Wrapper (Shell) Horizontal Bottom Wear Plates
General Purpose Bucket 0.39 / 0.51 / 0.81 / 0.92 / 1.05 / 1.17 / 1.28 m3
Optimized reinforced construction Corner adapter Positioned under Shape increases heel clearance Protects bottom section and
for high strength and performance Side cutter to increase strength. and decreases wear rate. reinforces bucket for greater Heavy Duty Bucket 0.73 / 0.90 / 1.07 / 1.24 / 1.32 / 1.49 m3
matched to the machine‘s power. strength and rigidity. Designed for Severe Duty Bucket 0.91 / 1.07 / 1.23 m3
easily replacement during
maintenance repair.
C : Crushing jaw
D : Demolition jaw
Lip Plate (Cutting Edge) Tooth (Tip) Side cutter Side Wear Plates P : Pulverizing jaw
S : Shearing jaw
Beveled edge for better penetration Designed with mechanical Designed for better penetration and Side plates meet up with bottom
and 500BHN material for high properties that maintain hardness used high wear resistant material. wear plates for seamless corner
abrasion resistance. for long wear life in tough digging protection. Material Handling Multi-Grapple Stone Grapple Wood Grapple Log Grapple Orange Grapple
applications.
Model Weight Max Jaw opening Max. Closing Force Capacity
Multi-Grapple MG22 1,423 kg 2,044 mm 5.7 t 0.75 m3
Stone Grapple SG22 1,285 kg 2,000 mm - 0.23 m3
Wood Grapple L/P WG22 1,185 / 1,155 kg 2,000 mm - 0.3 m3
Log Grapple L/P LG22 1,280 / 1,250 kg 2,000 mm - 0.44 m3
Orange Grapple OG22 1,300 kg 2,150 mm - 0.5 m3
L : Link type
General Purpose bucket Heavy Duty bucket Severe Duty bucket Extra Severe Duty Bucket P : Pendulum type
which is also called General Purpose which is also called Heavy Duty bucket, is which is also called Severe Duty which is also called X class bucket.
bucket, is designed for digging and the most commonly used bucket in the bucket. The bucket is designed for The bucket is designed for use in high
re-handling soft to medium materials e.g. construction equipment market and is use in high density mining and quarry density mining and quarry application
materials with low wear characteristics designed mainly for use in heavy application using high strength and using high strength and high abrasion Earth Moving Clamshell Bucket Plate Compactor Ripper
such as top-soil, loam, coal. construction but also used in low density high abrasion resistance materials. resistance materials.
mining and quarry application. It can be used in the toughest of It can be used in the toughest of Model Weight Max. Jaw opening Capacity
applications. applications. CLAMSHELL BUCKET CB22 1,440 kg 2,080 mm 0.8 m3
Based on ISO 10567 and SAE J296, Arm length without quick change clamp This bucket recommendation is based on machine stability considering the tipping load
3 3
A : Suitable for materials with density of 2,100 kg/m (3,500 lb/yd ) or less with certain density of handling material, and should be strictly followed.
3 3
B : Suitable for materials with density of 1,800 kg/m (3,000 lb/yd ) or less It’s more recommendable to use a smaller size of bucket than recommendation under the
3 3
C : Suitable for materials with density of 1,500 kg/m (2,500 lb/yd ) or less severe working condition and application to avoid the durability risks.
3 3
D : Suitable for materials with density of 1,200 kg/m (2,000 lb/yd ) or less
X : Not Recommended
DIMENSIONS WORKING RANGES
DIMENSIONS
Boom 5,700 mm (18’8”) Arm 2,900 mm (9’6”) Shoe 600 mm (2’) - Std
5,700mm 5,200mm 8,500mm
Boom type (One piece)
(18’8”) (17’1”) (27’8”)
2,400mm (Std.) 2,900mm 3,500mm 2,000mm 2,400mm 6,200mm
Arm type
(7’ 10”) (9’ 6”) (11’ 6”) (6’ 7”) (7’ 10”) (20’ 3”)
Bucket type (SAE/PCSA) 1.05m3 (Std.) 0.92m3 0.81m3 1.28m3 1.17m3 0.39m3 ditch
2,750mm
A Tail Swing Radius → ← ← ← ←
(9’)
3,045mm 2,940mm 3,225mm 3,145mm 2,985mm 3,175mm
B Shipping Height (Boom)
(10’) (9’ 8”) (10’ 7”) (10’ 4”) (9’ 10”) (10’ 4”)
3,110mm 3,005mm 3,290mm 3,210mm 3,254mm
C Shipping Height (Hose) 3,050mm(10’)
(10’ 2”) (9’ 10”) (10’ 10”) (10’ 6”) (10’ 6”)
9,500mm 9,485mm 9,500mm 9,080mm 8,990mm 12,317mm
D Shipping Length
(31’ 2”) (31’ 1”) (31’ 2”) (29’ 9”) (29’ 6”) (40’ 4”)
E Shipping Width →
2,990mm
← ← ← ← WORKING RANGE
(9’ 10”)
1,055mm 5,700mm 5,200mm 8,500mm
F C/Weight Clearance → ← ← ← ← Boom length
(3’ 6”) (18’8”) (17’1”) (27’8”)
2,975mm (Std.)
G Height Over CAB. → ← ← ← ← 2,400mm 3,500mm 2,000mm 2,400mm 6,200mm
(9 ’ 9”) Arm type 2,900mm
(7’ 10”) (11’ 6”) (6’ 7”) (7’ 11”) (20’ 3”)
2,710mm (9’ 6”)
H House Width → ← ← ← ←
(8’ 11”) Bucket type (SAE/PCSA) 1.05m3 (Std.) 0.92m3 0.81m3 1.28m3 1.17m3 0.54m3 ditch
845mm 9,480 9,900 10,340 8,580 8,950 15,379
I CAB. Height above House → ← ← ← ← A Max. digging reach
(2’ 9”) (31’ 1”) (32’ 6”) (33’ 11”) (28’ 2”) (29’ 4”) (50’ 4”)
960mm 9,300 9,730 10,230 8,380 8,760 15,268
J CAB. Width → ← ← ← ←
(3 ’ 2”) B Max. digging reach at ground level
(30’ 6”) (31’ 11”) (33’ 7”) (27’ 6”) (28’ 9”) (50’ 1”)
3,650mm
K Tumbler Distance → ← ← ← ← 6,110 6,620 7,220 5,355 5,755 11,661
(11’ 12”) C Max. digging depth
(20'1") (21’9”) (23’ 8”) (17’ 7”) (18’ 11”) (38’ 2”)
4,445mm
L Track Length → ← ← ← ← 6,830 6,990 7,150 6,085 6,300 11,148
(14’ 7”) D Max. dumping height
2,990mm (22'5") (22’ 11”) (23’ 6”) (20’) (20’ 8”) (36’ 5”)
M Undercarriage Width → ← ← ← ←
(9’ 10”) 3,070 2,555 1,953 3,370 3,195 2,009
E Min. dumping height
600mm (10'1") (8’ 5”) (6’ 5”) (11’ 1”) (10’ 6”) (6’ 6”)
N Shoe Width → ← ← ← ←
(2’) 9630 9,750 9,870 8,845 9,065 13,403
947mm F Max. digging height
O Track Height → ← ← ← ← (31'7") (32’) (32’ 5”) (29’) (29’ 9”) (43’ 9”)
(3’ 1”)
8,299 8,450 8,612 7,555 7,770 12,380
480mm G Max. bucket pin height
P Car Body Clearance → ← ← ← ← (27'3") (27’ 9”) (28’ 3”) (24’ 9”) (25’ 6”) (40’ 6”)
(1’ 7”)
5,390 5,640 6,010 4,435 4,880 9,729
H Max. vertical wall depth
(17'8") (18’ 6”) (19’ 9”) (14’ 7”) (16’) (31’ 9”)
6,050 6,410 6,750 5,790 5,842 10,064
I Max. radius vertical
DIGGING FORCE (ISO) (19’ 10”) (21’) (22’ 2”) (19’) (19’ 2”) (33’)
Bucket (SAE/PCSA) 0.51m3 0.81m3 (Std.) 0.92m3 1.05m3 1.17m3 1.28m3 0.54m3 ditch 5,910 6,430 7,050 5,115 5,545 11,561
J Max. digging depth(8’level)
(19’ 5”) (21’ 1”) (23’ 2”) (16’ 9”) (18’ 2”) (37’ 9”)
15,200kgf 15,200kgf 15,200kgf 15,200kgf 15,200kgf 15,200kgf 10,000kgf
2,880 2,865 2,830 2,495 2,510 4,854
Digging force 149.2kN 149.2kN 149.2kN 149.2kN 149.2kN 149.2kN 98.1kN K Min. radius 8’ line
(9’ 5”) (9’ 5”) (9’ 3”) (8’ 2”) (8’ 3”) (15’ 9”)
33,510lbf 33,510lbf 33,510 lbf 33,510lbf 33,510lbf 33,510lbf 22,046lbf
1,698 519 -224 1,819 640 196
L Min. digging reach
Arm 2,000mm 2,400mm (Std.) 2,900mm 3,500mm 6,200mm (5’ 7”) (1’ 8”) (-9’) (6’) (2’ 1”) (6’)
15,300kgf 12,600kgf 10,800kgf 9,700kgf 5,980kgf 3,410 3,410 3,440 3,370 3,190 4,714
M Min. swing radius
Digging force 150.1kN 123.7kN 106kN 95.2kN 58.6kN (11’ 2”) (11’ 2”) (11’ 3”) (11’ 1”) (10’ 6”) (15’ 4”)
33,730lbf 27,778lbf 23,810lbf 21,385lbf 13,183lbf d. Bucket angle (deg) 166。 166。 166。 166。 166。 166。
At power boost (ISO)
LIFTING CAPACITY
Option 1
Metric
Boom : 5,700mm (18’8”) Arm : 2,400mm (7’7”) Bucket : SAE/PCSA 1.05m3 (1.4yd3) CECE 0.9m3 (1.2yd3) Shoe : 600mm(2’) Unit : 1,000kg
B(m) A(m)
7 *5.03 4.98 *4.47 *4.47 6.29
6 *5.06 4.96 *4.46 3.80 *4.44 3.79 7.00
5 *5.77 *5.77 *5.37 4.88 *5.13 3.77 *4.51 3.32 7.52
4 *10.28 *10.28 *7.83 *7.83 *6.58 6.36 *5.84 4.76 *5.37 3.70 *4.66 3.03 7.87
3 *9.51 8.64 *7.52 6.12 *6.40 4.62 *5.70 3.62 4.67 2.91 4.59 2.86 8.08
2 *10.98 8.24 *8.41 5.89 *6.95 4.48 5.71 3.54 4.62 2.86 4.47 2.77 8.17
1 *11.86 7.99 *9.07 5.72 7.17 4.37 5.63 3.46 4.58 2.82 4.47 2.75 8.12
0 (Ground) *5.72 *5.72 *12.14 7.87 *9.43 5.61 7.08 4.29 5.57 3.41 4.59 2.82 7.96
-1 *5.52 *5.52 *8.70 *8.70 *11.96 7.84 9.45 5.56 7.03 4.24 5.54 3.39 4.85 2.98 7.65
-2 *8.80 *8.80 *12.21 *12.21 *11.41 7.87 *9.16 5.56 7.03 4.24 5.56 3.40 5.33 3.27 7.20
-3 *12.33 *12.33 *13.09 *13.09 *10.45 7.95 *8.47 5.61 *6.88 4.29 *6.05 3.78 6.56
-4 *13.90 *13.90 *11.03 *11.03 *8.93 8.10 *7.19 5.72 *6.08 4.77 5.67
-5 *6.36 *6.36 *5.73 *5.73 4.38
B(ft) A(ft)
25 *10.05 *10.05 18.74
20 *11.11 10.66 *9.78 8.49 22.79
15 *14.13 *14.13 *12.15 10.38 *10.73 7.13 *10.06 7.02 25.22
10 *21.27 *21.27 *17.99 15.51 *13.87 9.95 11.16 6.96 10.15 6.31 26.49
5 *21.44 14.60 15.55 9.52 10.95 6.76 9.83 6.06 26.78
0 (Ground) *13.18 *13.18 *23.02 14.13 15.22 9.23 10.80 6.62 10.11 6.21 26.10
-5 *23.57 *23.57 *22.63 14.03 15.11 9.13 11.18 6.85 24.39
-10 *28.35 28.06 *20.29 14.20 *14.76 9.24 *13.35 8.41 21.39
STANDARD CONFIGURATION -15 *20.56 *20.56 *14.76 14.69 *13.15 12.87 16.39
Metric
Boom : 5,700mm (18’8”) Arm : 2,900mm (9’6”) Bucket : SAE/PCSA 0.92m3 (1.2yd3) CECE 0.8m3 (1.1yd3) Shoe : 600mm (2’) Unit : 1,000kg Option 2
A(m) 2 3 4 5 6 7 8 Max. Reach Metric
B(m) A(m) Boom : 5,700mm (18’8”) Arm : 3,500mm (11’6”) Bucket : SAE/PCSA 0.81m3 (1.1yd3) CECE 0.7m3 (0.9yd3) Shoe : 600mm (2’) Unit : 1,000kg
8 *3.42 *3.42 5.94 A(m) 2 3 4 5 6 7 8 9 Max. Reach
7 *3.31 *3.31 6.85
A(m)
6 *4.53 *4.53 *4.39 3.84 *3.30 *3.30 7.51 B(m)
5 *4.87 *4.87 *4.69 3.79 *3.36 2.99 7.99 8 *2.97 *2.97 6.61
4 *5.95 *5.95 *5.37 4.79 *4.99 3.72 *4.50 2.95 *3.48 2.75 8.32 7 *3.54
*3.54 *2.89 *2.89 7.43
3 *11.94 *11.94 *8.57 *8.57 *6.92 6.19 *5.97 4.64 *5.36 3.62 4.67 2.90 *3.65 2.59 8.52 6 *4.04 3.92 *2.98 *2.98 *2.89 *2.89 8.04
2 *7.08 *7.08 *10.19 8.36 *7.89 5.93 *6.58 4.49 5.71 3.53 4.61 2.84 *3.89 2.51 8.60 5 *4.24 3.86 *3.87 3.05 *2.94 2.72 8.49
1 *5.62 *5.62 *11.36 8.03 *8.69 5.73 *7.11 4.36 5.61 3.44 4.55 2.79 4.09 2.50 8.56 4 *4.83 *4.83 *4.57 3.77 *4.39 2.99 *3.03 2.51 8.81
0 (Ground) *3.08 *3.08 *6.66 *6.66 *11.94 7.85 *9.21 5.59 7.05 4.26 5.54 3.37 4.51 2.75 4.18 2.54 8.40 3 *9.80 *9.80 *7.45 *7.45 *6.21 *6.21 *5.46 4.71 *4.97 3.67 *4.64 2.93 *3.18 2.38 9.00
-1 *5.53 *5.53 *8.59 *8.59 *12.03 7.77 9.40 5.51 6.98 4.19 5.49 3.33 4.48 2.73 4.39 2.67 8.11 2 *13.13 *13.13 *9.20 8.53 *7.26 6.02 *6.13 4.54 *5.41 3.56 4.63 2.86 *3.62 2.33 *3.38 2.30 9.07
-2 *7.92 *7.92 *11.11 *11.11 *11.71 7.77 *9.28 5.48 6.96 4.17 5.48 3.32 4.76 2.90 7.69 1 *8.04 *8.04 *10.63 8.12 *8.19 5.77 *6.74 4.38 5.63 3.45 4.55 2.79 3.77 2.29 *3.65 2.28 9.03
-3 *10.58 *10.58 *14.12 *12.89 *10.99 7.82 *8.81 5.51 6.98 4.19 5.51 3.35 5.41 3.29 7.09 0 (Ground) *3.76 *3.76 *7.64 *7.64 *11.54 7.85 *8.87 5.59 7.05 4.25 5.53 3.36 4.49 2.73 3.82 2.31 8.88
-4 *13.78 *13.78 *12.36 *12.36 *9.77 7.94 *7.86 5.59 *6.29 4.26 *5.86 4.00 6.28 -1 *5.45 *5.45 *8.73 *8.73 *11.93 7.71 *9.25 5.47 6.95 4.16 5.46 3.30 4.45 2.69 3.98 2.41 8.61
-5 *9.77 *9.77 *7.80 *7.80 *6.10 5.75 *5.85 5.50 5.15 -2 *7.33 *7.33 *10.55 *10.55 *11.87 7.66 9.30 5.41 6.90 4.12 5.43 3.27 4.44 2.68 4.27 2.58 8.21
-3 *9.47 *9.47 *13.01 12.64 *11.41 7.68 *9.06 5.41 6.90 4.11 5.43 3.28 4.75 2.88 7.66
-4 *12.02 *12.02 *13.59 12.79 *10.51 7.76 *8.40 5.46 *6.83 4.15 5.59 3.39 6.91
Feet Unit : 1,000lb -5 *15.24 *15.24 *11.49 *11.49 *9.01 7.91 *7.19 5.57 *5.77 4.36 5.91
-6 *8.30 *8.30 *6.51 *6.51 *5.75 *5.75 4.46
A(ft) 10’ 15’ 20’ 25’ Max. Reach
B(ft) A(ft)
25 *8.41 *8.41 *7.41 *7.41 20.73 Feet Unit : 1,000lb
20 *9.94 *9.94 *7.28 *7.28 24.45 A(ft) 10’ 15’ 20’ 25’ Max. Reach
15 *11.10 10.46 *10.37 7.16 *7.50 6.34 26.73
B(ft) A(ft)
10 *25.44 *25.44 *16.42 15.73 *12.94 10.00 11.16 6.95 *8.03 5.73 27.93
5 *13.83 *13.83 *20.28 14.71 *14.86 9.52 10.91 6.72 *8.91 5.51 28.20 25 *6.45 *6.45 22.80
0 (Ground) *15.25 *15.25 *22.52 14.09 15.16 9.16 10.71 6.53 9.21 5.61 27.56 20 *7.80 7.43 *6.36 *6.36 26.22
-5 *22.18 *22.18 *22.80 13.87 14.97 9.00 10.63 6.46 10.05 6.12 25.95 15 *9.93 *9.93 *9.48 7.28 *6.55 5.78 28.35
-10 *30.58 27.61 *21.20 13.95 15.02 9.03 12.02 7.31 23.15 10 *14.55 *14.55 *11.86 10.14 *10.48 7.02 *6.99 5.25 29.49
-15 *23.99 *23.99 *17.02 14.32 *12.97 10.35 18.64 5 *23.19 *23.19 *18.77 14.90 *13.97 9.59 10.94 6.74 *7.71 5.03 29.75
-20 *8.41 *8.41 *7.41 *7.41 20.73 0 (Ground) *17.48 *17.48 *21.70 14.10 15.16 9.15 10.68 6.50 8.42 5.09 29.14
-5 *21.68 *21.68 *22.73 13.73 14.88 8.90 10.54 6.37 9.07 5.48 27.62
1. Ratings are based on SAE J1097 -10 *29.55 27.07 *21.90 13.70 14.83 8.86 10.56 6.39 10.55 6.38 25.02
2. The load point is a hook located on the back of the bucket. : Rating Over Front -15 *27.18 *27.18 *18.87 13.96 *13.48 9.06 *12.58 8.49 20.92
3. * Rated loads are based on hydraulic capacity. -20 *12.60 *12.60 14.05
: Rating Over Side or 360 degree
4. Rated loads do not exceed 87% of hydraulic capacity or 75% of tipping capacity.
LIFTING CAPACITY
Option 3 Option 5
Metric Metric
Boom : 5,200mm (17’1”) Arm : 2,000mm (6’7”) Bucket : SAE/PCSA 1.28m3 (1.7yd3) CECE : 1.1m3 (1.4yd3) Shoe : 600mm (2’) Unit : 1,000kg Boom : 5,700mm (18’8”) Arm : 2,900mm (9’6”) Bucket : SAE/PCSA 0.93m3 (1.2yd3) CECE : 0.8m3 (1.0yd3) Shoe : 800mm (2’8”) Unit : 1,000kg
B(ft) A(ft)
20 *10.85 10.57 *9.51 *9.51 20.66 Feet Unit : 1,000lb
15 *13.70 *13.70 *12.39 10.41 *9.75 8.01 23.31 A(ft) 10’ 15’ 20’ 25’ Max. Reach
10 *26.46 *26.46 *17.42 15.85 *13.98 10.06 *10.50 7.12 24.69
A(ft)
5 *19.51 *19.51 *21.15 15.00 *15.72 9.68 11.02 6.83 24.99 B(ft)
0 (Ground) *21.71 *21.71 *23.19 14.50 15.42 9.41 11.41 7.04 24.27 25 *10.05 *10.05 18.74
-5 *32.31 28.18 *23.02 14.36 15.32 9.32 12.86 7.90 22.42 20 *11.11 10.92 *9.78 8.72 22.79
-10 *29.26 28.61 *20.32 14.52 *15.06 10.13 19.10 15 *14.13 *14.13 *12.15 10.64 *10.73 7.33 *10.06 7.21 25.22
-15 *19.26 *19.26 *14.84 *14.84 13.24 10 *21.27 *21.27 *17.99 15.89 *13.87 10.21 11.49 7.16 10.45 6.50 26.49
-20 *26.50 *26.50 *19.23 *19.23 5 *21.44 14.98 *15.59 9.78 11.27 6.96 10.13 6.25 26.78
0 (Ground) *13.18 *13.18 *23.02 14.51 15.66 9.49 11.12 6.82 10.42 6.40 26.10
-5 *23.57 *23.57 *22.63 14.41 15.55 9.39 11.52 7.06 24.39
-10 *28.35 *28.35 *20.29 14.58 *14.76 9.51 *13.35 8.65 21.39
-15 *20.56 *20.56 *14.76 *14.76 *13.15 *13.15 16.39
LIFTING CAPACITY
Option 7 Option 8
Metric Metric
Boom : 5,700mm(18’8”) Arm : 3,500mm(11’6”) Bucket : SAE/PCSA 1.05m3 (1.4yd3) CECE : 0.9m3 (1.2yd3) Shoe : 800mm (2’8”) Unit : 1,000kg Boom : 8,500mm (27’8”) Arm : 6,200mm (20’3”) Bucket : SAE/PCSA : 0.39m3 (0.51yd3) CECE : 0.35m3 (0.46yd3) Shoe : 600mm (2’) Unit : 1,000kg
DIPBE-1002-01-1605
www.doosaninfracore.com/ce/
Materials and Specifications in the catalogue are subject to change without notice.