Professional Documents
Culture Documents
VSM - P 3404 Alignment (BSK-Rexnord)
VSM - P 3404 Alignment (BSK-Rexnord)
Pipe Scaffolded
ID removed ID removed
(N) Sprocket Wheels (S)
𝑫𝑻𝒐𝒑
Bearings Bearings
𝒕𝒃𝒐𝒕𝒕𝒐𝒎 𝒕𝒃𝒐𝒕𝒕𝒐𝒎
𝑫𝑩𝒐𝒕𝒕𝒐𝒎
Bearings Bearings
Sprocket Wheels
ISO VG 320
1
Date: 4th December 2019
Key:-
Symbols Interpretation
X Radial Offset between and plumb line in West Direction.
Y Horizontal Offset between and plumb line in South Direction.
𝑋/𝑌𝑥,𝑇/𝐵 Subscript second letter. T = Top (43 m), B = Bottom (GF)
𝑋/𝑌𝑁/𝑠 ,𝑥 Subscript first letter. N =North S = South
𝐷𝑇𝑜𝑝 Diameter of drive shaft at point .
𝐷𝐵𝑜𝑡𝑡𝑜𝑚 Diameter of driven shaft at point .
𝑡𝑡𝑜𝑝 , 𝑡𝑏𝑜𝑡𝑡𝑜𝑚 Thickness of sprocket wheel at top and bottom.
Measurements:
General Measurements:-
𝑫𝑻𝒐𝒑 = 238 𝑚𝑚
𝑫𝑩𝒐𝒕𝒕𝒐𝒎 = 90.4 𝑚𝑚
𝒕𝒕𝒐𝒑 = 𝒕𝒃𝒐𝒕𝒕𝒐𝒎 = 20𝑚𝑚
2
Date: 4th December 2019
Calculations:
Radial Offsets
North Side:
𝐷𝑇𝑜𝑝 𝐷𝐵𝑜𝑡𝑡𝑜𝑚
= (𝑋𝑁,𝑇 + ) − (𝑋𝑁,𝐵 + ) = 449 − 547.2 = 𝟗𝟖 𝒎𝒎
2 2
Comments : Top North Side is displaced 98 mm to the West relative to Bottom – North
point.
South Side:
𝐷𝑇𝑜𝑝 𝐷𝐵𝑜𝑡𝑡𝑜𝑚
= (𝑋𝑆,𝑇 + ) − (𝑋𝑆,𝐵 + ) = 400 − 475 = 𝟕𝟓 𝒎𝒎
2 2
Horizontal Offsets
North Side:
= 𝑌𝑁,𝑇 − 𝑌𝑁,𝐵 = 𝟖. 𝟓 𝒎𝒎
Comments : Top North Side is displaced 8.5 mm to the South side.
South Side:
= 𝑌𝑆,𝑇 − 𝑌𝑆,𝐵 = 𝟐𝟏 𝒎𝒎
Comments : Top South Side is displaced further 21 mm to the South side.