Professional Documents
Culture Documents
How To Prevent Caking in NPK Fertilizer Production Process
How To Prevent Caking in NPK Fertilizer Production Process
transportation, which is caused by the moisture absorption, dissolution and evaporation of fertilizer grain,
and recrystallization. In this process, a crystal bridge is formed, resulting in the formation of small particles
into large particles and caking.
So how to avoid the fertilizer caking in NPK fertilizer production line?
2. In NPK fertilizer production process, the moisture content of fertilizer and packaging temperature
should be reduced, and the appropriate production time should be selected.
Fertilizer production is generally non-closed production. In the NPK fertilizer production line, the greater
the air humidity, the easier the fertilizer to absorb moisture and agglomerate. Fertilizer production avoids
the rainy season and concentrates on producing fertilizer on dry days. In the process of fertilizer
production, the raw materials are heated by the drum dryer, so that the moisture content of the fertilizer is
controlled below 0.6%, the cooling time of the fertilizer is prolonged, and the packaging temperature is
lowered, so the fertilizer is not easy to cake.
3. Adding anti-caking agent to reduce the physicochemical reaction between NPK fertilizer particles.
The higher the room temperature, the easier it is to dissolve. Generally, raw materials dissolve in their
own crystalline water and cause caking. Addition of talc powder, humic acid and other non-caking powder
can also add some surfactants to prevent caking.
4. Reduce the stacking height and storage pressure of fertilizer.
The greater the external pressure of fertilizer, the easier the contact between crystal and crystal, the
easier the caking; the smaller the external pressure, the more difficult the caking.
5. Precise screening of NPK fertilizer by screening machine can further improve the fertilizer uniformity.
NPK fertilizer particles are not uniform in size, with small gap between particles and more contact area, it
is easy to agglomerate. If the compressive strength of fertilizer granules is low, the fertilizer is easy to
deform and break during packaging, transportation and storage, which will increase the contact area
between granules and also lead to fertilizer caking.
If a fertilizer factory produces a large amount of fertilizer with NPK fertilizer production line, it can be
screened twice with a screener machine to obtain suitable fertilizer granules.