Srubber ExhaustFan Venti
HRVN 56.1400 K ele
Vibrations on the bearings:
‘Measurements for the evaluation of the vibrations must be based on VDI (Association of German Engineers)
Guideline 2
‘The measurements must be taken on the bearing points
Stages of vibration strength Evaluation stage |
r Effective
Stage velocity Group T
ven mls
028 SOT Bs 028
04s 70,28 bis 045
ors > 0,45 bis 0,74
1312 > O71 bie 1.12
1,8 > 1,12 bis 1,8 | good
28 > 1,8 bis 2.8
48 >28bis4s [usable]
mA >45bie7.4
12 > 7, bis 11,2 [si]
8 >112bis 18 | permissible
2 > 18bis 22
4s >2evs4s | excessive
| n > 45 bis 71
Casing
The threaded connections on the casing (Nanged threaded connections must be checked regularly. Please
‘observe the Inspection and Maintenance List.
The casing can be cleaned with high-pressure cleaning equipment.
Electrical connection boxes must not be directly subjected to the cleaning jel.
Flexible Joint
During the optical inspection, check particularly for
Discoteration of the outer coating
Blistering
Brittleness
Extreme folds
Deformation
Deposits of dust, sand, et,
Chafe marks.
Deposits between flexible joint and baffle plate
Tension-free installation
“operating instructions
‘GVNS614; Dat: 08.04.1959 a