Professional Documents
Culture Documents
Cat 2 RCD Questions
Cat 2 RCD Questions
CAT 2 - 35 MARKS
DURATION: 2h30min
Use your own calculator.
Draw a straight horizontal line after each question!
2) The restrained slab panel is shown in Figure 1 below. Its effective span in
each direction is 4.5 m and 4.2 m. The slab supports the f inishes and felting
of 2.20 kN/m2, and the live load of 1.5 kN/m2. Given fcu = 30 N/mm2, fy = 250
N/mm2. The slab thickness is assumed to be 150 mm. Design the required
reinforcement, and check for deflection (critical at mid-span). /8marks
Fig 1
5) Given data:
Coefficient due end column constraints
i.Braced column β=0.75
ii.Unbraced column β=1.2
The clear distance between end restraints lo=4750 mm
Column section and elevation
Page 1 of 2
Section of clumn AB Elevation
Questions:
i) Calculate effective height of column AB (ley= lex) /1mark
ii) Calculate slenderness ratio of column AB (consider braced and unbraced column)
/2marks
iii) According to the values calculated in b, is the column (consider braced and
unbraced column) short or slender? /2marks
GOOD LUCK!
Opportunity does not waste time with those who are unprepared!
Page 2 of 2