Professional Documents
Culture Documents
Magtech 2013 - 04 - 05 - MPV - Eng PDF
Magtech 2013 - 04 - 05 - MPV - Eng PDF
MPV
Voltage: without stabilizer
Regarding the German “Energiewende”, there is a strong demand for new solutions with stabilizer
to achieve more flexible and higher performing grids. The MPV is installed on a feeder to
6:00 am 9:00 12:00 15:00 18:00
counter the problems of voltage rise due to power from Photo Voltaic or any other
distributed generation source. The Magtech patented MCI “Magtech Controllable CONTINUOUS STEPLESS STABILIZATION: MPV with
Inductance” technology used in the magnetic circuits modulates the voltage level as a continuous stepless stabilization gives higher power
function of the varying power flow to reduce the “downstream” voltage. Function of capacity, reduced rapid voltage changes and better
voltage reduction is preset in factory, and, once operating, the units need no further customer voltage quality ref. EN50160
adjustment. The exemplary reliability and long life (40 yrs) of the sealed copper/iron
system is the same as a normal transformer. The system has high efficiency in operation,
and when no regulation is required, it automatically changes to by-pass mode. The rapid Technical data MPV130-400 MPV260-400
reaction time of the system ensures good supply quality in all power flow conditions.
Connection TN / TT TN / TT
Accommodating the reverse power flows due to Photo-Voltaic and other distributed Frequency [Hz] 50 50
energy sources embedded in an electricity distribution network is an emerging problem
Input voltage [kV] 0,4 0,4
requiring new solutions. Magtech has employed their patented variable inductance
technology, proven over many years of use in hundreds of Voltage Boosting installations, Output voltage [volts] 0,4 0,4
in the conception of a revolutionary Magnetic In-Line Grid Stabiliser for Photovoltaic
Load, nominal [kVA] 130 260
which has no parts in movement during operation, and automatically takes itself out of
the circuit when not needed, so as to give maximum efficiency. Overload, 6 hours @20°C [kVA] 208 416
replacement after 15-20 years Note! Technical data are preliminary. Magtech reserves the
right to make changes without notice
– Direct technical support