Professional Documents
Culture Documents
BM - Euromed - Catalogo - Cadera-ES - CopiaSmall PDF
BM - Euromed - Catalogo - Cadera-ES - CopiaSmall PDF
BM - Euromed - Catalogo - Cadera-ES - CopiaSmall PDF
Hip Implants
The modular straight cemented stem hip prosthesis is designed to be used as a primary and a revision total hip.
The stem sizes allow accurate matching of prosthesis to the medullary canal. The prosthesis offers dual fixation
by combining the locking effect of a stem to bone contact, plus minimal bone cement support. It may be used in
conjuction with the modular head cone 12/14 and polyethylene acetabular components for total articular replacement.
Material
Certifed Stainless Steel according to ASTM F 138 - ISO 5832/1
CoCrMo alloy according to ASTM F 75 - ISO 5832/4
Certified TI6AI4V ELI according to ASTM F 136 - ISO 5832/3
1
Modular Straight Cemented Stem
Trays & Instruments Set ( EK0305N001N )
4
3
5 6 7 8 9
10
11
27
28
26
29
25
30
12 13 14 15 16 17 18 19 20 21 22
23
24
2
Modular Straight Cemented Stem
Trays & Instruments Set ( EK0305N001N )
3
EMC Calcar Replacement Cemented Stem
Used for hip arthroplasty in cases of hip fractures when collapse of the neck structure has occurred also used for
revision arthroplasty where there is significant loss of bone stock in the region of the calcar.
Specially for large deficits in the calcar region and severe proximal bone loss.
The calcar replacement femoral stem allows customization via its proximal segments. The calcar series offers
38-48 and 58 mm resection levels to compensate for bone deficiencies in the proximal/medial portion of the femur.
In addition to the three resection levels, the stems are offered in three different diameters 8-10-12 mm. Diameter 8 mm
component has standard 140 mm stem length, other stem diameters 10-12 mm are offered with 150 mm stem length. These
components are specifically designed to conform and match with the patient´s anatomy.
The keel, located below the medial collar provides the additional rotational stability that has been reduced due the medial bone
loss.The three dimensional Interlock grit blast over on the stem surface provides increased fixation at the prosthesis/cement
interface compared with that of traditional smooth surface implants.
The angle of the neck is 135° for all sizes, while the neck length increases in the line with the prosthesis diameter.
The prosthesis also has a cone 12/14 taper 5°38'.
Material
It is manufactured from casting CoCrMo alloy according to ASTM F 75 - ISO 5832/4.
4
EMC Modular Replacement Cemented Stem
Trays & Instruments Set ( EK0313N001N )
5
6
3
7
8
1
22 21
23 20
24 19
25
18
26 27 28 29 30
14 13
12
11
15
10
16
17
5
EMC Modular Replacement Cemented Stem
Trays & Instruments Set ( EK0313N001N )
6
Almond Modular Cemented Stem
Almond Modular Cemented Stem is a well proven implant. It consists of a complete set for primary total hip
replacement:
• The femoral stem is designed to guarantee an optimal metaphysical filling.
• The metaphysical zone has a triangular section to avoid the generation of varus forces.
• The triangular section in the metaphysical zone guarantees an antirotational effect and the round section in the
bottom stem part allows an optimal medullary canal filling.
• The internal stem profile changes with the implant size in ordert o keep constant the head offset and avoid a valgoid
effect for the smaller sizes.
Material
Certified CoCrMo alloy according to ASTM F 75 - ISO 5832/4
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
7
Almond Modular Cementless Stem
Almond Modular Cementless Stem is a well proven implant. It consists of a complete set for primary total hip
replacement:
• The femoral stem is designed to guarantee an optimal metaphysical filling.
• The metaphysical zone has a triangular section to avoid the generation of varus forces.
• The triangular section in the metaphysical zone guarantees an antirotational effect and the round section in the
bottom stem part allows an optimal medullary canal filling.
• The internal stem profile changes with the implant size in ordert o keep constant the head offset and avoid a
valgoid effect for the smaller sizes.
Material
Certified TI6AI4V ELI according to ASTM F 136 - ISO 5832/3
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
8
Almond Modular Stem Cemented / Cementless
Trays & Instruments ( EK0318N001N )
5
11
6
12 4
7
13 3
8
14 2
9
15 1
10
20
21
19
22
18
17
23
16
29
28
27
30
26
25
31
24
9
Almond Modular Stem Cemented / Cementless
Trays & Instruments ( EK0318N001N )
10
ZWEYMULLER Modular Cementless Stem
11
ZWEYMULLER Modular Cementless Stem
The Zweymuller stem is the original tapered stem with a rectangular cross section and has been implanted since
1979. Since its introduction, the Zweymuller has established high standards for total hip arthroplasty with its
design features, the excellent clinical results, and a technically simple surgical technique.
Indications;
The versatile Zweymuller product portfolio provides the surgeon with a broad range of solutions, from trauma to
revision surgery, all with one consistent design philosophy and a simple range of instruments.
The range of indications includes
• Osteoarthritis
• Avascular necrosis
• Rheumatoid arthritis
• Trauma
• Post-traumatic osteoarthritis
• Bone diseases like Morbus Paget or Morbus Gaucher
• Revision surgery
Material
Certified Titanium alloy according to ASTMF 136 -ISO 5832/3.
12
13
ZWEYMULLER Modular Cementless Stem
Trays & Instruments Set ( EK0701N111N )
Hip Implants
9 EE3604R004N TEST HEAD FOR MODULAR STEM / Ø32 - 12*14 Cone - XL
10 EE3604R005N TEST HEAD FOR MODULAR STEM / Ø32 - 12*14 Cone - XXL
11 EE0139N001N ROTATION HOLDER-ZWEYMULLER
12 EE0204S002N BONE HOOK BLUNT
13 EE0210S101N HOHMANN RETRACTOR TYPE 1
14 EE0210S102N HOHMANN RETRACTOR TYPE 2
15 EE0502S101N CHISEL - ZWEYMULLER PROTHESIS
16 EE0521N102N STRAIGHT CHISEL
17 EE0521N105N SPOON CURETTE
18 EE0521N125N SPATUL CURETTE
19 EE0610N001N FEMORAL HEAD EXTRACTOR
20 EE0702N003N FEMORAL HEAD IMPACTOR
21 EE1000S001N RASP BAR
22 EE1001S050N MODULAR RASP HANDLE
23 EE1016N000N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 0
24 EE1016N010N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 1
25 EE1016N020N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 2
26 EE1016N030N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 3
27 EE1016N040N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 4
28 EE1016N050N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 5
29 EE1016N060N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 6
30 EE1016N070N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 7
31 EE1016N080N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 8
32 EE1016N090N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 9
33 EE1016N100N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 10
34 EE1016N110N MODULAR RASP FOR ZWEYMULLER PROTHESIS / 11
35 EE1016N101N MODULAR RASP FOR ZWEYMULLER PROTHESIS / (-1)
36 EE1033S003N REAMER AWL
37 EE1102S005N EXTRACTION SCREW
14
Optifit Cementless Cup
Optifit Cementless Cup can be used for all forms of arthrosis, advanced wear and tear of the hip joint for degenerative,
post-traumatic or rheumatoid arthritis fracture of avascular necrosis of the head of the femur.
It is also for sequels of earlier operations suchs as: osteosynthesis, joint reconstruction, athrodesis, hemiarthroplastic or total
hip replacement.
The Cementless standard cup is an acetabular implant of uncemented fixation which is made with three dimensional interlocking
grit blast that presents a hemispherical shape with polar deflection to enhance the periferic distribution of the stresses
affecting the cup.
The titanium cup has three holes on the superior-lateral side. The screws have a spheric head, and have always a good
contact with their seatings, even when the introduction angle is different, this prevents the fretting corrosion and assures the
screw stability.
Chosen as the basic material was Ti6Al4V which has been tried and tested over many years and is
outstandingly biocompatible. Titanium Plasma Spray coating or additional Hydroxyapatite coating are optional for the bone
side contact surface which enhance initial fixation and long term bone integration.
The porosity of plasma spray is ideal for osseo integration.
Material
Certified TI6AI4V ELI according to ASTM F 136 - ISO 5832/3.
EB3201N044S 44 25
EB3201N046S 46 26
EB3201N048S 48 27 ∅D
EB3201N050S 50 28
EB3201N052S 52 29
EB3201N054S 54 30
EB3201N056S 56 31
EB3201N058S 58 32
EB3201N060S 60 33
EB3201N062S 62 34
EB3201N064S 64 35
EB3201N066S 66
EB3201N068S 68
EB3201N070S 70
EB3201N072S 72
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
15
Optifit Pe Crosslinked Liner
The cementless standard cup can reduce the possibility of wear debris from the inner surface of the UHMWPE cup. It is
done by the machining and polishing of the inner surface. The precision of accomplishment gives a greater assurance over
the direct contact between the UHMWPE insert and inner surface of the metal cup reducing micromotions and fretting.
Material
XL UHMWPE (Cross-Linked Ultra High Molecular Weight Polyethylene) according to ISO 5834/1-2 selected for its high
degree of purity, good biotolerance, high mechanical performance and friction properties.
Ceramic insert Bioceral® Alumina according to ISO 6474 by HTI Technologies (France)
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
16
Optifit Ceramic Liner
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
17
Optifit Cementless Cup
Trays & Instruments Set ( EK0306N022N )
20 19 18 17 16 15 14 13 12 11 10
27 26 25 24 23 22 21
37 36 35 34 33 32 31 30 29 28
38 39 40 41 42 43 44 45 46
47 48 49 50 51 52 53
63 62 61 60 59 58 57 56 55 54
72
71
70
69
68
67
66
64
65
18
Optifit Cementless Cup
Trays & Instruments Set ( EK0306N022N )
36 EE0824S560N Test Liner For Optifit Cup / Ø28 - 15° - Ø58-60 This instrumentation Set is used for Ø28 insert
37 EE0824S564N Test Liner For Optifit Cup / Ø28 - 15° - Ø62-64 and Modular Head.
19
Cemented Cup
The cups are placed in degenerated anatomical acetabulum and require cement for fixation. Provided with radiopaque wire for
postoperatory visualisation. The standard 50 mm acetabular cup meets the anatomical requirements of major patients,
while the 44 mm cup is used if the ilium is narrow in cases of high dislocation with migration of the acetabulum. Two larger sizes
of acetabular cups, 54, 58 mm have been added to the range to meet special requirements of large boned patients.
The U.H.M.W. polyethylene cup has well proved tissue tolerance, elasticity and a very low coefficient of friction.
Particular attention is paid to the precision machining and surface finish of the acetabular component, so that, when combined
with the femoral component, an exceptionally stable total hip replacement is achieved with minimal risk of dislocation
and minimum wear rate on the acetabular component.
Material
XL UHMWPE (Cross-Linked Ultra High Molecular Weight Polyethylene) according to ISO 5834/1-2 selected for its high
degree of purity, good biotolerance, high mechanical performance and friction properties.
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
20
Cemented Cup
Trays & Instruments Set ( EK0306N040N )
1
6
4 3 2 5
7
8
21 20
9
19 18 17 16 15 14 13 12 11 10
21
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
22 BRANDMEDICAL ECUADOR S.A.
Bipolar Head
Trays & Instruments Set ( EK0306N001N )
42 44 46 48 50 52 54 56
1 2 3 4 5 6 7 8
64 62 60 58
14
13 12 11 10 9
15
16 17 18 19 20 21 22 23 24 25
26 27
No Ref. Number Description Test Head For Bipolar Head / Ø28 - 12*14
17 EE0810R002N
1 EE0811R042N Test For Bipolar Head / Ø42 -M
2 EE0811R044N Test For Bipolar Head / Ø44 Test Head For Bipolar Head / Ø28 - 12*14
18 EE0810R003N
-L
3 EE0811R046N Test For Bipolar Head / Ø46
Test Head For Bipolar Head / Ø28 - 12*14
4 EE0811R048N Test For Bipolar Head / Ø48 19 EE0810R004N
– XL
5 EE0811R050N Test For Bipolar Head / Ø50
Test Head For Bipolar Head / Ø28 - 12*14
6 EE0811R052N Test For Bipolar Head / Ø52 20 EE0810R005N
- XXL
7 EE0811R054N Test For Bipolar Head / Ø54 Test Head For Bipolar Head / Ø32 - 12*14
21 EE0814R101N
8 EE0811R056N Test For Bipolar Head / Ø56 -S
9 EE0811R058N Test For Bipolar Head / Ø58 Test Head For Bipolar Head / Ø32 - 12*14
22 EE0814R102N
10 EE0811R060N Test For Bipolar Head / Ø60 -M
11 EE0811R062N Test For Bipolar Head / Ø62 Test Head For Bipolar Head / Ø32 - 12*14
23 EE0814R103N
-L
12 EE0811R064N Test For Bipolar Head / Ø64
Test Head For Bipolar Head / Ø32 - 12*14
13 EE0127S101N Ring Clamp For Bipolar Head 24 EE0814R104N
- XL
14 EE0219N001N Bipolar Insert Remover Test Head For Bipolar Head / Ø32 - 12*14
15 EE0802S011N Femoral Head Gauge 25 EE0814R105N
- XXL
Test Head For Bipolar Head / Ø28 - 12*14 26 EE0218N010N Cup Impactor Straight
16 EE0810R001N
-S 27 EE0218N011N Bipolar Cup Impactor Attachment
23
DISPONIBLE EN ECUADOR
IMPORTADO Y DISTRIBUIDO POR
BRANDMEDICAL ECUADOR S.A.
24
In revision arthroplasty, especially in cases of osteolysis or large cement mantels, the extended femoral defects can cause
intraoperatively shaft fractures when removing the stem.
The defects and fractures must be bridged by a long stem. The implants have to be adapted exactly to the diameter of the
cortical tube and have to be placed distally beyond the pathologic area, where stress patterns become normal.
EMR revision hip system consists of single modular elements, stems, proximal body and safety screws. All elements are
able to be fixed rotationally free. The stems are available in three different lengths of 142 – 172mm, straight with eight
different diameters.
These components do really guarantee to solve all intraoperative situations as soon as the surgeon sees the defect during
revision. A torque limiter fixes the compression force between the single modules always the same value of torque.
Material
The EMR revision hip prosthesis is manufactured from Titanium Ti6Al4V ELI according to ASTMF 136 and ISO
583273, which has been specifically designed for the manufacture of orthopedic implants. This alloy is characterized by
demonstrating excellent biocompatibility, together with a high resistance of corrosion and superior mechanical strength.
The roughened surface finish also plays a viral role in the osseointegration.
25
26
27
EE0521N005N
EE0521N025N
EE0521N103N
EE0610N001N
EE0701S002N
EE0702N003N
EE0712S001N
EE0712S002N
EE0712S003N
EE0802S011N
EE0831N003N
EE0831N004N
EE0831N005N
EE0831N006N
EE0831N007N
EE0831N008N
EE1001S040N
EE1001S041N
EE1001S042N
EE1001S050N
EE1004N001N
EE1013S013N
EE1013S014N
EE1013S015N
EE1013S016N
EE1013S017N
EE1013S018N
EE1106N101N
28
29
Comments
..............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
DISTRIBUIDOR EXCLUSIVO
.............................................................................................
.............................................................................................
PARA ECUADOR
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
BRANDMEDICAL ECUADOR S.A.
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contacto:
....................................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 099-8852466
Luz Garzón ............................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Germán
. . . . . . . . . Fuertes
. . . . . . . . . . 099-8686028
............................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Philipp
. . . . . . . .Keller
. . . . . . . . . . . 099-9705616
............................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
.............................................................................................
30
Hambur
g
Fr
ankur
t
HOW TO CONTACTUS
EuromedImplant
sGmbH
Wil
hadi-
Kir
chhof13
21682Stade,Germany
Phone:+49(0)41417897290
Fax:+49(0)41417782700
of
fi
ce@euromed-
implant
s.de
www.eur
omed-i
mplants.
de