This inspection checklist is for equipment supplied by Vendor: Equipment Type/Name. It lists 21 check points related to operator qualifications, equipment condition, safety devices, and maintenance records that are checked and noted as Yes, No, or NA. Upon inspection of the equipment carrying engine number on date at location by Inspection Done By and Vendor Representative, the equipment was found to be satisfactory.
This inspection checklist is for equipment supplied by Vendor: Equipment Type/Name. It lists 21 check points related to operator qualifications, equipment condition, safety devices, and maintenance records that are checked and noted as Yes, No, or NA. Upon inspection of the equipment carrying engine number on date at location by Inspection Done By and Vendor Representative, the equipment was found to be satisfactory.
This inspection checklist is for equipment supplied by Vendor: Equipment Type/Name. It lists 21 check points related to operator qualifications, equipment condition, safety devices, and maintenance records that are checked and noted as Yes, No, or NA. Upon inspection of the equipment carrying engine number on date at location by Inspection Done By and Vendor Representative, the equipment was found to be satisfactory.
Check Points Status Sl.No Check Points Yes No NA 1 Equipment Identification number/ Serial number 2 Insurance Copy & Validity 3 Availability of TPI 4 TPI displayed in the machine 5 Operator Name & DL, DL Validity/ Experience Letter 5.1 Operator Medical 5.2 General Medical 5.3 Eye Test 5.4 Height Phobia Test 5.5 Blood Pressure 6 Display of Manufacture DO's & Don'ts 7 Display of Safe Working Load/ Capacity 8 Whether Manlifter Platform/ Bucket is in good condition
9 Whether the door/ inner side opening & Locking
Mechanism is in good condition
10 Whether condition of the bucket flor floor and hand
railing in good condition
11 Is the Bucket control Panel switches, brake, legible
marking and protection in good condition 12 Emergency Operation switch is working condition Main Horn, Swing and marching horn in working 13 condition
14 Overhoist/ load cut off and waening devices is in
good condition 15 All meter , gauges is working 16 Fire Extinguisher availability 17 Condtion of Tyres/ wheel and bolt tightness 18 Availability of guard on all rotating parts Whether the machine is free from leakages like Oil, 19 Fuel .
20 Whether the vendor has provided the maintence
report of last 3 months where machine has worked 21 Availabilty and Caliberation done for 21.1 Load Sensor 21.2 Tilt Sensor 21.3 Angle Sesnor for Ultra Boom Machine vendor to provide authorisation letter 22 from the machine manufacturer for doing caliberation The Equipment carrying engine number was inspected on dated at by of vendor representative was found satisfactory during the project site. Inspection Done By: Equipm
Note: HECKLIST
Remarks rrying engine number at by was found satisfactory during the inspection. The m