Professional Documents
Culture Documents
ASME PCC-1 - Assembly Bolt Stress & Torque Determination
ASME PCC-1 - Assembly Bolt Stress & Torque Determination
ASME PCC-1 - Assembly Bolt Stress & Torque Determination
ASME PCC-1 Appendix O in addition with WRC 538 can be used to detemine requisite torque for ange
bolt during assembly. The appendix provides two approaches to select appropriate bolt stress and hence
torque. In the simple approach of ASME PCC-1, bolt stress is selected to achieve a desired target gasket
stress per equation O-1. The torque corrseponding to the selected bolt stress can then be easily found by
using equation O-2. Though this procedure is very simple and straightforward to implement, it doesn’t
check the safety of all the joint components ( ange, bolt and gasket). A second more elaborate approach
– “Joint Component Approach” is given in para O-4 of ASME PCC-1 to check the safety of all the joint
components. In this approach:
the bolt damage is prevented by keeping the bolt stresses below yield
minimum gasket stresses are ensured to achieve proper sealing
maximum gasket stresses are limited to prevent gasket damage
ange damage is prevented by keeping the ange stresses within limits
ange rotation is limited to prevent leakage
Flange stresses and rotation can be checked using either elastic closed form analysis or an elastic plastic
FEA. An illustration of using the “Joint Component Approach” for weld neck anges using an elastic
closed form analysis based on Appendix 2 of ASME Sec VIII Div 1 and WRC 538 follows.
fsefea.com/asme-pcc-1 1/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 2/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 3/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 4/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 5/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 6/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 7/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
fsefea.com/asme-pcc-1 8/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
This entry was posted in ASME Calculations and tagged ASME, ASME PCC-1, ASME PCC-1 Appendix O,
ASME PCC-1 Calculation Sheet, Assembly Bolt Stress, Assembly Bolt Torque Determination, WRC 538, WRC
538 Calculation Sheet. Bookmark the permalink.
Leave a Reply
Your email address will not be published. Required elds are marked *
Comment
Name *
Email *
Website
POST COMMENT
Search …
RECENT POSTS
fsefea.com/asme-pcc-1 9/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
RECENT COMMENTS
ASME PCC-1 : Assembly Bolt Stress & Torque Determination on ASME PTB-3 Validation – Elastic
Plastic Analysis
ARCHIVES
December 2018
January 2018
December 2017
November 2017
March 2017
CATEGORIES
ASME Calculations
ASME PTB-3
practical example
Pressure Vessels
fsefea.com/asme-pcc-1 10/11
12/27/2019 ASME PCC-1 : Assembly Bolt Stress & Torque Determination
META
Log in
WordPress.org
sandip@fsefea.com
Sandip Vinayka
Zerif Lite developed by ThemeIsle
Sandip Vinayka, Chennai, Tamil
Nadu, India
fsefea.com/asme-pcc-1 11/11