Professional Documents
Culture Documents
Drawing PDF
Drawing PDF
Drawing PDF
Dashboard Test report of TEST-06 (ESE-1) General Principles Of Design, Drawing & Safety (DS-01)
(../studentpanel/page.php?
page=dashboard&view=overview)
Score Overview Subject wsie Question wise Time wise Compare with Toppers Solution Difficulty Level
Rank
My Tests
(../studentpanel/page.php?
page=product&view=product_list)
Subject: GS
Language: English
My Results
(../studentpanel/page.php? Q.1
page=report&view=overall_report)
Which of the following statements are correct regarding layout of drawing sheet ?
I.Title block of drawing lies within the drawing space of bottom right hand corner of sheet and has maximum length of 170 mm.
✉ Message
II.Five centering marks are provided on all drawing to meet the requirement of positioning of the drawing for microfilm production.
(../studentpanel/page.php?
page=message&view=message_list)
III.Four orientation mark is provided in layout to indicate the orientation of drawing.
Only I is correct
Bookmarked
Questions
InCorrect
(../studentpanel/page.php?
page=bookmarkq&view=q_list) Your Ans c
Correct Ans a
Bookmark
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 1/23
2/8/2018 Student Test Report | TestMent
Q.2
Scales
Set squares
Protractor
Compass
Solution
Mini-drafter combines the function of a T-square, set square, scales and protractor.
It is used for drawing horizontal, vertical, inclined, parallel, perpendicular lines along with its measurement.
Correct
Your Ans d
Correct Ans d
Time (Secs) 16
Bookmark
Q.3
I.The ISO ‘A’ series of sheet is based on a constant width to length ratio of
Only I
Only II
Both
None
Solution
The ISO ‘A’ series of sheet is based on a constant width to length ratio of .
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 2/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans b
Correct Ans b
Time (Secs) 92
Bookmark
Q.4
A0
A1
A2
A3
Solution
Correct
Your Ans b
Correct Ans b
Time (Secs) 37
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 3/23
2/8/2018 Student Test Report | TestMent
Bookmark
Q.5
2B
1B
HB
Solution
InCorrect
Your Ans a
Correct Ans d
Time (Secs) 22
Bookmark
Q.6
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 4/23
2/8/2018 Student Test Report | TestMent
Solution
Correct
Your Ans a
Correct Ans a
Time (Secs) 41
Bookmark
Q.7
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 5/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans a
Correct Ans a
Time (Secs) 66
Bookmark
Q.8
Which of the following methods of dimensioning of circular hole, arcs and sphere of radius 70 mm each are correct ?
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 6/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans d
Correct Ans d
Time (Secs) 36
Bookmark
Q.9
A.5 mm
B.7 mm
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 7/23
2/8/2018 Student Test Report | TestMent
C.10 mm
1.0.7 mm
2.0.5 mm
3.0.35 mm
Codes:
Solution
The line width recommended for letter height 5 mm, 7 mm, and 10 mm is 0.35 mm, 0.5 mm, and 0.7 mm respectively.
InCorrect
Your Ans a
Correct Ans b
Time (Secs) 51
Bookmark
Q.10
I.Type A is preferred over type B of lettering since no. of divisions of height in type A lettering is more of than that of type B.
II.Vertical letters are preferred over slopped letters because of easy execution.
III.The line width of type A lettering is always less than that of type B lettering.
Only I
II and III
I and III
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 8/23
2/8/2018 Student Test Report | TestMent
All
Solution
Lettering type A : Height of the capital letter is divided into 14 equal parts.
Lettering type B : Height of the capital letter is divided into 10 equal parts.
InCorrect
Your Ans d
Correct Ans b
Bookmark
Q.11
In a scale, a line length of 2 cm is drawn on the drawing sheet to represent the actual length of 1m. The RF value is ?
50 : 1
1 : 50
1:1
1:2
Solution
R.F =
= (same units)
= 1 : 50
So Ans is b
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 9/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans b
Correct Ans b
Time (Secs) 42
Bookmark
Q.12
I.In the backward vernier scale, the length of each vernier scale division is smaller than that of the main scale division.
II.In forward vernier scale, the length of each vernier scale division is greater than that of the main scale division.
Only I
Only II
Both
None
Solution
There are two types of vernier scales forward or direct vernier and backward or retrograde vernier.
In the forward vernier scale, length of each vernier scale division is smaller than that of main scale division, and the divisions on the vernier
are numbered in the same direction as that of the main scale. In backward Vernier scale, the length of each vernier scale division is greater
than that of MSD and divisions on vernier are numbered in direction opposite to that of main scale.
Correct
Your Ans d
Correct Ans d
Time (Secs) 61
Bookmark
Q.13
The locus of a point moving between a fixed point and a fixed straight line at constant ratio as
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 10/23
2/8/2018 Student Test Report | TestMent
A conic section
a cycloid
an involute
a polygon
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 11/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans a
Correct Ans a
Time (Secs) 14
Bookmark
Q.14
Involutes
Cycloid
Hypocycloid
Spiral
Solution
Involute :
x=
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 12/23
2/8/2018 Student Test Report | TestMent
y=
InCorrect
Your Ans d
Correct Ans a
Time (Secs) 82
Bookmark
Q.15
A circular tyre is rolling with = rad/sec on a straight path without slippage. Radius of tyre is 1m. consider a point ‘p’ on the
circumference. What will be the area under the path traced by that point. The rolling period is 4 sec.
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 13/23
2/8/2018 Student Test Report | TestMent
Number of revolution =
Total area =
= m2
InCorrect
Your Ans d
Correct Ans a
Time (Secs) 64
Bookmark
Q.16
An ant is stuck at a point P inside a cycle tyre of radius ‘1 m’ which rotates in clockwise direction at = rad/sec as shown in figures
What will be the distance travelled by the ant in 1 minute. Consider that the rolling is without slippage.
240 m
2.4 m
24 m
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 14/23
2/8/2018 Student Test Report | TestMent
2400 m
Solution
= rad/sec × 60
= rad
The path here travelled by the ant will be a cycloid and arc length of the cycloid for is S = 8r
Total distance =
Unattempted
Your Ans
Correct Ans a
Bookmark
Q.17
Which of the following statements are correct regarding 1st angle of projection?
III.Front view (FV) lies below XY line, Top view (TV) lies above XY line.
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 15/23
2/8/2018 Student Test Report | TestMent
Only II
Solution
In 1st angle projection FV lies above XY line, top view (TV) lies below XY line.
Correct
Your Ans a
Correct Ans a
Time (Secs) 34
Bookmark
Q.18
Projecting an object such that the projectors are parallel to each other and 30° to the plane of projection.
Projecting an object such that the projectors are parallel to each other and 120° to the plane of projection
Projecting an object such that the projectors are parallel to each other and 180° to the plane of projection
Projecting an object such that the projectors are parallel to each other and 90° to the plane of projection.
Solution
Orthographic projection means projecting an object such that the projectors are parallel to each other and 90° to the plane of projection.
Correct
Your Ans d
Correct Ans d
Time (Secs) 22
Bookmark
Q.19
Solution
InCorrect
Your Ans c
Correct Ans a
Time (Secs) 58
Bookmark
Q.20
Choose the right option for the orthographic projections of a point ‘A’ located in HP and VP and 10 mm in front of left-side plane from the
following?
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 17/23
2/8/2018 Student Test Report | TestMent
Solution
Correct
Your Ans a
Correct Ans a
Time (Secs) 44
Bookmark
Q.21
For the point A, the projections coincide with each other at 50 mm above ‘xy’ line, state the quadrant in which the point is situated ?
First quadrant
Second quadrant
Third quadrant
Fourth quadrant
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 18/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans b
Correct Ans b
Time (Secs) 31
Bookmark
Q.22
True length of the line can be seen in top view when the line is
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 19/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans d
Correct Ans d
Bookmark
Q.23
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 20/23
2/8/2018 Student Test Report | TestMent
Correct
Your Ans a
Correct Ans a
Time (Secs) 41
Bookmark
Q.24
In an ellipse, the sum of the distances of any point from the two foci is equal to
Minor axis
Major axis
Transverse axis
Solution
For simplicity in arriving the property consider the point M on ellipse instead of considering a general point p(x,y).
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 21/23
2/8/2018 Student Test Report | TestMent
d= ...(1)
Also MF =
Putting in (1) d =
= major axis.
Correct
Your Ans b
Correct Ans b
Time (Secs) 35
Bookmark
Q.25
When a circle rolls inside another circle, the curve traced by a point on the rolling circle is known as
Cycloid
Epicycloid
Hypocycloid
Involute
Solution
When a circle rolls inside another circle, the curve traced by a point on the rolling circle is known as hypocycloid
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 22/23
2/8/2018 Student Test Report | TestMent
InCorrect
Your Ans b
Correct Ans c
Time (Secs) 37
Bookmark
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=585 23/23