Professional Documents
Culture Documents
Procedure Using UT Slide
Procedure Using UT Slide
Search
RELATED TITLES
1.2K views 2 0
Save Embed Share Print DAC Distance Ut Rule of Thumb Ndt Method &
Amplitude Curve Acceptance
1. Draw the actual weld profile on the transparent(plastic) ,draw also the mirror im
2. If you got a signal, maximize and read the BPL value .For example 42mm
3. From the test plate, measure the distance from the Probe Index to the Center o
ruler. This is called the Stand-off Distance.For example 40mm.
4. On the slide, put the probe index at Stand- Off(40mm )from the center weld. S
Stand Off=40mm
Center of weld
60°
https://www.scribd.com/document/135709322/Procedure-Using-UT-Slide 1/3
12/31/2019 Procedure Using UT Slide
Related titles
Did you know?
Trust the science! Reading leaves people feeling more
relaxed and accomplished. Scribd makes it easy to read
more.
Learn more
DAC Distance Ut Rule of Thumb Ndt Method & UT Level II Radiography ULTRASONIC
Share this
Amplitude Curve document Acceptance General Questions Formulas1 TESTING OF…
DAC Distance Ut Rule of Thumb Ndt Method & UT Level II General Radiography U
Amplitude Curve UPLOADED BY Acceptance Questions Formulas1 T
UPLOADED BY Tonyo Ayshiyu UPLOADED BY UPLOADED BY UPLOADED BY U
Tonyo Ayshiyu Tonyo Ayshiyu Fuaz Sukarya … Tonyo Ayshiyu
https://www.scribd.com/document/135709322/Procedure-Using-UT-Slide 2/3
12/31/2019 Procedure Using UT Slide
Related titles
ABOUT SUPPORT
Press Accessibility
Gi s
LEGAL
Terms
Privacy
Copyright
Copyright © 2019 Scribd Inc. . Browse Books . Site Directory . Site Language: English
https://www.scribd.com/document/135709322/Procedure-Using-UT-Slide 3/3