Professional Documents
Culture Documents
Permabond Catalogue
Permabond Catalogue
Adhesive
Catalogue
Revision 3 18/05/09
Anaerobic Threadlockers
Permabond A1042 rapid threadlocker
Permabond A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently
may need to be dismantled for maintenance. The high vibration resistance makes Permabond A1042
particularly suited to replacing lock washers, split pins and other mechanical locking devices.
Pack Sizes
Pack Sizes
10 x 10ml bottles
n Strength: High
n Viscosity: Low 10 x 50ml bottles
n Approvals: WRAS 5 x 200ml bottles
1 x 2 litre container
Pack Sizes
n Strength: High
10 x 50ml bottles
n Viscosity: High
n Approvals: WRAS 5 x 200ml bottles
Pack Sizes
n Strength: Very high 10 x 50ml bottles
n Viscosity: Medium
5 x 200ml bottles
n Approvals: WRAS
1 x 2 litre container
Pack Sizes
n Strength: Very high
n Viscosity: High 10 x 50ml bottles
n Approvals: WRAS 5 x 200ml bottles
Anaerobic Retainers
Permabond A025 high-temperature retainer (200°C)
Permabond A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of
metal parts such as bearings, gears, studs and other threaded components. It has been designed to
withstand temperatures of up to 200°C or for where the maximum degree of chemical resistance is
required. These features allow machining tolerances to be relaxed and mechanical locking devices to be
eliminated, with subsequent cost savings.
Pack Sizes
n Strength: High
10 x 50ml bottles
n Viscosity: Low/Meduim
n Approvals: WRAS 5 x 200ml bottles
n Strength: High
n Viscosity: Low/Medium Pack Sizes
n Approvals: WRAS
10 x 50ml bottles
5 x 200ml bottles
Pack Sizes
n Strength: High 10 x 50ml bottles
n Viscosity: Medium
5 x 200ml bottles
10 x 250ml bottles
Pack Sizes
10 x 50ml bottles
n Strength: Medium
5 x 200ml bottles
n Viscosity: High
n Approvals: WRAS 10 x 300ml cartridges
1 x 2 litre container
Pack Sizes
n Strength: Medium
n Viscosity: High 10 x 25ml syringes
10 x 75ml accordions
10 x 300ml cartridges
Pack Sizes
n Strength: Low/Medium
n Viscosity: Very Migh 10 x 75ml accordions
10 x 300ml cartridges
Pack Sizes
n Strength: Very High 15 x 20g bottles
n Viscosity: High 10 x 50g bottles
1 x 500g bottle
Cyanoacrylates
Permabond 790 rapid-curing wicking grade
Permabond 790 bonds a wide variety of substrates from metal and glass to plastic and wood. It has a
low viscosity that makes it ideal for post-assembly bonding and automatic dispensing of tiny amounts. It
cures extremely rapidly, offering improved production times.
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: Wicking 10 x 50g bottles
1 x 500g bottle
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: Very Low 10 x 50g bottles
1 x 500g bottle
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: High
10 x 50g bottles
1 x 500g bottle
Cyanoacrylates
Permabond 2010 high viscosity
Thanks to its “non-drip” characteristics, Permabond 2010 is ideal for bonding many porous materials
and can be used on vertical or inverted surfaces. Its rapid cure and gap fill capability extend the use of
cyanoacrylates into previously unsuitable applications.
Pack Sizes
n Strength: High
15 x 20g bottles
n Viscosity: High
n Approvals: WRAS 10 x 50g bottles
1 x 500g bottle
Pack Sizes
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: High 10 x 50g bottles
1 x 500g bottle
High-Temperature Cyanoacrylates
Permabond 801 temperature-resistant to 130°C
Permabond 801 is a low-viscosity, high-performance adhesive, specifically designed to provide the high
temperature resistance required by certain applications. It provides excellent bond strengths on most
metal surfaces and to a wide variety of plastic and rubber materials.
Pack Sizes
Pack Sizes
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: Low
10 x 50g bottles
1 x 500g bottle
Pack Sizes
Pack Sizes
n Strength: High 15 x 20g bottles
n Viscosity: Very Low
10 x 50g bottles
1 x 500g bottle
Pack Sizes
n Strength: High
n Viscosity: Low 15 x 20g bottles
10 x 50g bottles
1 x 500g bottle
Pack Sizes
10 x 100g cartridges
10 x 320ml cartridges
1 x 5 litre
Pack Sizes
5 x 200ml bottles
1 x 5 litre
Permabond TA435 no-mix resin and initiator for temperature cyclic environments
Permabond TA435 is a structural acrylic adhesive designed primarily for bonding metals, ferrites,
ceramics and some thermoplastics. This adhesive may be used in a variety of structural bonding
applications due to its versatile performance capabilities.
TA435 provides high strength while maintaining excellent flexibility, resulting in tough, durable bonds
with outstanding impact and peel resistance. Pack Sizes
Handling strength is achieved in a few minutes
at room temperature by using Permabond 2 x 65ml kit
Initiator 41. (with 1x20ml Initiator 41)
Permabond Initiator 41
For use with Permabond TA430, TA435 and TA437. Use in Pack Sizes
the ratio 10 parts resin:1.5 parts initiator. 1 x 20ml bottle with brush
NB: 65ml kits contain 2 x 65ml resin and 1 x 20ml
1 x 1 litre container
initiator.
Permabond Initiator 43
For use with Permabond TA436. Use in the ratio 10 parts Pack Sizes
resin:1.5 parts initiator. 6 x 4oz bottle
1 x 1 litre container
Structural Acrylics
Pack Sizes
n Strength: High
n Viscosity: High
10 x 300ml cartridges
n Fixture time: 3-5 minutes
30-45 seconds with Initiator 41
Pack Sizes
n Strength: High
n Viscosity: Low 10 x 300ml cartridges
n Fixture time: 10-20 seconds (for use with Initiator 41)
Pack Sizes
10 x 50ml bottles
n Strength: Very High (5xA & 5xB)
n Viscosity: Medium
n Fixture time: <1 min 10 x 250ml bottles
(5xA & 5xB)
Permabond Initiator 46
For use with Permabond TA4246. Use in the ratio 10 Pack Sizes
parts resin:1.5 parts initiator. 1 x 35ml bottle with brush
1 x 1 litre container
ing GRP, ceramics, wood and other substrates. It is 10 x 50ml cartridges + 10 mixing nozzles
convenient to use in an easy-to-dispense cartridge
photo or it can be used bead on bead without a mixing 6 x 400ml cartridges + 6 mixing nozzles
nozzle.
n Strength: High
2 x 1.5 kg kit
n Viscosity: Medium
n Fixture time: 3-5 minutes
Pack Sizes
n Strength: Medium/High 10 x 50ml bottles
n Viscosity: Medium
10 x 250ml bottles
n Colour: Colourless
1 x 2 litre bottle
Pack Sizes
12 x 400ml aerosols
Permabond POP Primer for pre-treatment of polyolefins before bonding with Permabond cyanoacrylate
Permabond Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and
silicones prior to bonding with Permabond cyanoacrylate adhesives. Due to their low surface
energy, plastics such as PTFE, Polypropylene (PP), Polyethylene (PE) and silicones are difficult to
bond without special surface treatment. After treatment with POP Primer, durable bonds, which
are stronger than the substrate material, can be achieved.
Pack Sizes
6 x 50ml bottles
1 x 500ml container
1 x 1 litre container
Nozzles & Guns
Permabond P-nozzles for accurate dispensing of low viscosity Permabond cyanoacrylates
Pack Sizes
100 x 1mm nozzles
Permabond 50ml Epoxy Mixing Nozzles for use with 50ml epoxy dual cartridges
Pack Sizes
25 nozzle pack
30 nozzle pack
Permabond 400ml Epoxy Mixing Nozzles for use with 200ml and 400ml epoxy dual cartridges
Pack Sizes
24 nozzle pack
Permabond 50ml Handgun for use with 50ml epoxy dual cartridges
Pack Sizes
1 handgun
Permabond Gun Converter low-cost adaptor for 50ml epoxy dual cartridges to fit in 320ml mastic gun
Pack Sizes
1 converter
Notes:
Permabond minimum order requirements: for orders under £250 / €400 there is surcharge of £25 / €40 to cover
administration costs.
Permabond will be pleased to discuss other packaging requirements you may have.
Most of our products can be despatched in approximately 5 working days. For European countries, please allow a
further 4-5 working days for transportation.