Professional Documents
Culture Documents
I 9403 DS1124776 1
I 9403 DS1124776 1
I 9403 DS1124776 1
548e/02
Intelligent Sounder Strobe
0832-CPD-0448
Z2
Features
Z1
Strobe provided by high intensity LED cluster. Z2
Optional transparent colorless lens (C-94WL) Sounder Strobe
available. D1
programmer.
Single/dual address programmable.
Fig.1
Optional Evacuate & Alert mode
2. External 24VDC.
16 selectable tones. Z1
powering. D1
D2
Optional power saving mode or
hi-consumption mode.
Z1
Working modes: sounder & strobe / strobe only Z2
/ sounder only. Sounder Strobe
D1
LPCB approved D2
Standard: EN 54-3.
Fig. 2
Wiring Setting alarm tone
Z1(2), Z2(4): loop of FACP, non-polarized. Use P-9910B handhold programmer to set the address(s),
D1(9), D2(7): External 24VDC, non-polarized.
tone and consumption mode. Use function-3 to change
Connect to Z1&Z2 in loop powered mode.
the pre-settings. The tones is listed below.
Recommended Cabling
2
1.0mm or above fire cable for each terminal, subject to
local codes
This document is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80,Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
www.gst.com.cn www.utcfireandsecurity.com service.gst@fs.utc.com
DS1124776-1 Page 1
Tone Type Specification
This document is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80,Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
www.gst.com.cn www.utcfireandsecurity.com service.gst@fs.utc.com
DS1124776-1 Page 2