Professional Documents
Culture Documents
BZW 06
BZW 06
Transil™
Description
Transil diodes provide high overvoltage
protection by clamping action.
Their instantaneous response to transient
overvoltages makes them particularly suited to
protect voltage sensitive devices such as MOS
technology and low voltage supplied IC’s.
1 Characteristics
Table 2: Absolute maximum ratings (Tamb = 25 °C)
Symbol Parameter Value Unit
Ppp Peak pulse power Tj initial = Tamb 600
W
P Power dissipation on infinite heatsink Tamb = 75 °C 1.7
tp = 10 ms
IFSM Non repetitive surge peak forward current 100 A
Tj initial = Tamb
Tstg Storage junction temperature range -65 to +175
Tj Operating junction temperature range -55 to +175 °C
TL Maximum temperature for soldering during 10 s at 5 mm from case 260
% Ipp
100 10 µs
0 t
1000 µs
Figure 3: Peak pulse power dissipation versus Figure 4: Peak pulse power versus exponential
initial junction temperature pulse duration
PPP(W) PPP(kW)
700 100.0
10/1000 µs Tj initial = 25 °C
600
500
10.0
400
300
200 1.0
100
Tj (°C)
t P(ms)
0
0 25 50 75 100 125 150 175 200 0.1
1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01
Figure 5: Clamping voltage versus peak pulse Figure 6: Junction capacitance versus reverse
current (maximum values). applied voltage (unidirectional types)
IPP(A) C(pF)
1000.0 10000
Tj initial = 25 °C 8/20 µs F = 1 MHz
Vosc = 30 mVRMS
10/1000 µs
Tj = 25 °C
10 ms BZW06-5V8
100.0
1000 BZW06-13
10.0
BZW06-58
100
BZW06-171
1.0
BZW06-5V8
BZW06-376
BZW06-188
BZW06-10
BZW06-19
BZW06-33
BZW06-58
BZW06-85
VR(V)
VCL(V)
0.1 10
1 10 100 1000 1 10 100 1000
BZW06-5V8B 1.0E+01
Tj = 125 °C
1000
BZW06-13B
Tj = 25 °C
1.0E+00
BZW06-58B
100 BZW06-171B
1.0E-01
VR(V) VFM(V)
10 1.0E-02
1 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Figure 9: Relative variation of thermal impedance Figure 10: Leakage current versus junction
junction to ambient versus pulse duration temperature
(printed circuit board FR4, eCU = 35 µm)
Zth(j-a) /Rth(j-a) IR(nA)
1.0E+00 1.E+04
Recommended pad layout
1.E+03
VR = VRM
VBR < 10 V
1.0E-01
1.E+02
1.E+01
1.0E-02
VR = VRM
1.E+00 VBR > 10 V
t P(s) Tj (°C)
1.0E-03 1.E-01
1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 25 50 75 100 125 150 175
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
3 Ordering information
Figure 12: Ordering information scheme
BZW 06 - 10 B RL
Types
No suffix = unidirectional
B = bidirectional
Packaging
Blank = Ammopack
RL = Tape and reel
Notes:
(1)Marking: logo, data code, type, cathode band (for unidirectional types only)
4 Revision history
Table 7: Document revision history
Date Revision Changes
Feb-2003 3A Last update.
Updated Table 2: "Absolute maximum ratings (Tamb = 25 °C)",
Table 4: "Electrical characteristics (Tamb = 25 °C)", Section 5.1:
06-Apr-2017 4
"Characteristics (curves)" and Section 6.1: "DO-15 package
information".
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.