Professional Documents
Culture Documents
Report Prabh
Report Prabh
On
“SOLID WORKS & NX 10”
At INFOWIZ, Bathinda
Submitted by
Prabhjeet Singh
University Roll No.
170620301
Submitted To
Er. Yadwinder Pal Sharma
DECLARATION
I hereby declare that the work entitled (“SOLID WORKS”) is an authentic record
of my own work carried out at INFOWIZ as requirement of training for the award
of degree of B.-Tech. (Mechanical Engineering), Giani Zail Singh Campus College
of Engineering & Technology, Maharaja Ranjit Singh Punjab Technical
University, Bathinda under the guidance of Mr. M.S Kaushik during June-July,
2019.
(Signature of student)
Date: ___________________
Certified that the above statement made by the student is correct to the best of our
knowledge and belief.
---------------
Training Coordinator
ABSTRACT
The training report consists of the various instructions used in the SOLID
WORKS designing, various examples of designs. My project details on
FLANGE ASSEMBLY using SOLID WORKS.
First of all I would like to thank the Almighty, who has always guided me to work
on the right path of the life. I acknowledge with deep sense of gratitude and most
sincere appreciation, the valuable guidance and unfailing encouragement rendered
to me by Mr. M.S. Kaushik (Training guide) for his proficient and enthusiastic
guidance, useful encouragement and immense help. I have been deep sense of
admiration for them inmate goodness and inexhaustible enthusiasm.
I wish to extend my sincere gratitude to Dr. Balwinder Singh Sidhu (HOD, ME)
and Er. Yadwinder Pal Sharma (Training Incharge, ME) for their guidance,
encouragement and valuable suggestions which proved extremely useful and
indebtness helpful in completion of this industrial training.
My heartfelt gratitude goes to all teachers and guidance group who with their
encouraging, caring words, constructive criticism and segmentation have
contributed directly or indirectly in a significant way towards completion of this
training. My special thanks go to my friends whose support and encouragement
have been a constant source of assurance, guidance, strength, and inspection to me.
Prabhjeet Singh
University Roll no.: 170620301
COMPANY PROFILE
Our skilled team of professionals make sure that the product is developed as
per the customer’s needs and keeping the customer informed about the
development of their project from time to time. We do not only emphasize on
formulating an attractive solution to our clients but also believe in providing a
workable solution. INFOWIZ offers research based Search Engine Marketing
products that help achieve greater insights to customer’s online business. Our
Research & Development arm offers SEO tools for SEM professionals.
SOLID WORKS
SOLIDWORKS was headed by John McEleney from 2001 to July 2007 and Jeff
Ray from 2007 to January 2011. The current CEO is Gian Paolo Bassi from Jan
2015. Gian Paolo Bassi replaces Bertrand Sicot, who is promoted Vice President
Sales of DassaultSystèmes’ Value Solutions sales channel.
Market:-
Many of today’s leading designs are deceivingly simple. They look like
simple prismatic shapes but, in fact, they are not. Take the iPhone for example. It
can be described as a thin brick, that can be modeled by simply extruding and
adding radii to. The however, is not the case. Look at the way that the reflections
wrap around the corners. If it were just a brick with radiuses applied the corners
and edges, the reflections would not flow so smoothly.
Fig.2) Back Cover of Phone
Commands in Solid Works:-
1.) Line
2.) Rectangle
3.) Rib
4.) Sweep
5.) Slot
6.) Relation
7.) Re-design
8.) Control
9.) Extrude
11.)Fillis a “catch-all” for areas that can not be defined using Loft and Sweep. It
should be the only consideration when needing to “fill” 3 sided or 5 or more sided
areas.
12.) Boundary is much like loft except that it does treats the first and second
directions equally. Loft profiles have influence over the guide curves which
sometimes produces un-predictable and undesired behavior. It also can match
adjacent surfaces curve continuously on all sides.
Workflow:-
Sketch Commands:
Line
Rectangle
Polygon
Spline
Circle
Slot
Arc
Making cylinder :-
Making Gear :-
Fig.7) 3D Design
3D or Feature Commands:
Extrude
Swept
Revolve
Loft
Extruded Cut
Lofted Cut
Revolve Cut
Pattern
a. Linear Pattern
b. Circular Pattern
Shell
Rib
Draft
Fig.8) 3D Features
Assembly Design :
Assembly mates :
After designing the parts , now they are assembled by using the mate technology.
While doing assembly the mates are the main point to be remember. In Solid
Works, mates can be applied using the Mate Property Manager. Choose the Mate
button in the Assemble Command Manager or choose Insert > Mate from the.
Select a planar face, curved face, axis, or a point on the first component and then
select the entity from the second component; the selected entities will be
highlighted. The names of the selected entities will be displayed in the Entities to
Mate selection box of the Mate Selections rollout.
Project : Flange Assembly
Part Design:
It helps to design various products and services, testing them in very cost effective
way like Model and prototype testing as you learned earlier in engineering degree
class.
The DSS Solidworks Corp also develops other software products, which is very
much helped in various sections of engineers especially for Mechanical. They are
3D CAD, Simulation, Product Data management, Technical communication,
Electrical design and 3Dexperince. This CAD modeler is not limited to mechanical
engineers; other engineering streams (Especially for Electrical & Civil) and
product designers can convert new product ideas into reality.
SOLIDWORKS Flow Simulation is a tool that tests internal and external fluid-
flow simulation and thermal analysis so designers can conduct tests on virtual
prototypes.
File format:
SOLIDWORKS files use the Microsoft Structured Storage file format. This means
that there are various files embedded within each SLDDRW (drawing files),
SLDPRT (part files), SLDASM (assembly files) file, including preview bitmaps
and metadata sub-files. Various third-party tools (see COM Structured Storage)
can be used to extract these sub-files, although the subfiles in many cases use
proprietary binary file formats.