Professional Documents
Culture Documents
Ford PDF
Ford PDF
Ford PDF
A brief history
about Ford
Michigan is the birthplace
of the modern automobile
and Henry Ford was the
first to perfect the modern
.©
assembly line. The 9N & 2N
Ford tractors designed by
Harry Ferguson were highly
nc
innovative, with other tractor
New Holland
manufacturers eventually
Ford
,I
point hitch weight transfer
system.
ts
ar
"This tractor is a 1955 Ford 640 serial #37437 which was originally owned
by my father-in-law, Donald Gregory." Wayne Wiedfeld from Missouri
rP
to
ac
Tr
Customer
submitted photos "This tractor has done all that and more, and was the "1950 Ford 8N in Denton Texas.” Chris Funk from Texas
er
.©
cap.....................................................197 springs..............................................214 levers.................................................203 drawbars.................................227, 228
clamps.....................................196, 197 oil filter.............................................204 eyelet assy kit................................228
filter element.................................196 C pin......................................................203 fork....................................................226
nc
gasket...............................................196 Camshaft, parts seal....................................................202 gasket...............................................227
New Holland
hoses.................................................197 camshaft..........................................160 seal, bearing, gasket kit..............203 hanger..............................................227
oil cups.............................................196 gears.................................................161 shift cover assys............................203 leveling box assys...............226, 227
Ford
spring clip.......................................196 lifter...................................................161 shifter plate....................................203 leveling rod....................................226
,I
tubes.........................................196,197 wrench set......................................161 spring...............................................203 lift arm support pin kit...............227
vacuator valves.............................197 Caps throw out bearing carrier..........202 lift arms............................................227
Alternators, parts air cleaner.......................................197 throw out bearings......................202 lock....................................................228
ts
alternators.......................................185 distributor.......................................182 torque limiter disc........................204 pins...........................................226, 227
bolt kit..............................................186 front hub.........................................223 Countershafts....................................202 rockshaft arm.................................226
bracket kits.....................................186
ar
fuel.....................................................199 Crankshafts, parts stabilizer bar...................................227
conversion kits..............................186 oil fill / breather....................161, 162 bearings..................................157, 158 stabilizer kit....................................227
pulleys......................................185,186 oil filler tube...................................162 crankshafts.....................................157 top links...........................................226
Ammeter gauges..............................174 power steering.....................207, 208 gears.................................................157
rP
Axle, parts pre cleaner.............................197, 198 pulleys..............................................157 E
axle shaft.........................................215 PTO....................................................222 seals...................................................157 Electric outlet socket, parts
clamp lock nut...............................215 radiator............................................171 Cylinder heads, parts boot...................................................178
gaskets.............................................217 steering wheel...............................204 cylinder heads...............................160 connector plug.............................178
to
.©
Fuel lines H bushing and shim kit..................182 Oil pressure gauges, parts
lines...................................................200 Hand cranks........................................193 caps...................................................182 copper line kit...............................175
rubber bumper.............................200 Headlights, parts clips...................................................182 fittings..............................................175
nc
Fuel sending units............................176 bezels................................................189 coils...................................................181 gauges..............................................175
New Holland
Fuel tanks, parts headlights............................188 - 190 distributors............................182, 183 Oil pump parts
,I
caps...................................................199 reinforcement plate....................189 dust cover.......................................181 drive gear........................................163
liner kit.............................................198 rings..................................................189 gasket kit.........................................182 oil pump..........................................163
screen...............................................198 washer..............................................189 grommet.........................................183 pickup tube....................................163
ts
shut off valves................................198 wings................................................189 insulator kit.....................................182 plunger............................................163
tanks.................................................198 Hood, parts points.......................................183, 184 repair kits.........................................163
ar
Fuse holder.........................................181 air cleaner funnel assy................195 primary conductor.......................182 shafts................................................163
air cleaner grille doors................195 resistors............................................181 spring...............................................163
G bolt kits...................................194, 195 retainer.............................................183
Gauges bumpers.................................195, 196 retaining wire................................181 P
rP
ammeter..........................................174 door...................................................195 rotor buttons.................................182 Pinion shaft seal................................215
cluster gauges...............................177 door handle....................................195 spark plug wire sets............176, 183 Piston pump, parts
fuel.....................................................176 door hinge......................................195 spark plugs.....................................183 bearing.............................................221
oil pressure.....................................175 hinges......................................195, 196 spring clip.......................................182 changeover plate.........................220
to
oil pump drive...............................163 lift piston.........................................217 Manuals.......................................230, 231 valve seat tools..............................220
steering gear sectors..................206 O-ring...............................................217 Mufflers wobble plate..................................221
Generators, parts oil level dipsticks..........................218 adaptor............................................165 Piston ring sets..................................156
cut out assy....................................185 pin......................................................217 bracket.............................................163 Power steering parts
generators......................................185 quadrant stop kit..........................218 clamps.....................................163, 164 cap............................................207, 208
pulleys..............................................185 ring kit..............................................217 heat shield......................................164 cylinder end...................................208
tag......................................................185 seat support...................................217 mufflers......................... 162, 164, 165 cylinders..........................................208
Governors, parts spring plate....................................218 filter...................................................207
assemblies......................................170 valve kits..........................................217 N pulley................................................207
gaskets.............................................170 washer..............................................217 Nosecones...........................................194 pumps..............................................207
internal centrifugal assy............170 Hydraulic pump parts hood top panel.............................194 seal and O-ring kit........................207
repair kits.........................................170 assembly..........................................218 seal kit..............................................208
springs..............................................170 control valve assy.........................218
.©
seals...................................................222 Spark plug wiring sets....................183 bracket.............................................226 shifter plate....................................203
shifter support housing.............222 Spark plugs.........................................183 bushing...................................226, 228 spring...............................................203
Pushrod................................................160 Spindles, parts clevis.................................................227 throw out bearing carrier..........202
nc
gasket...............................................160 bearing.............................................210 drawbar chain kit.........................228 throw out bearings......................202
New Holland
grommets.......................................160 bushing............................................210 drawbars.................................227, 228 torque limiter disc........................204
bushing kit......................................210 eyelet assy kit................................228 Turbo chargers..................................155
Ford
R seal....................................................210 fork....................................................226
,I
Radiators, parts spindles............................................210 gasket...............................................227 U
bolt kit..............................................171 Starter hand cranks..........................193 hanger..............................................227 Umbrellas............................................229
caps..........................................171, 172 Starters, parts leveling box assys...............226, 227
ts
clamps..............................................172 covers...............................................187 leveling rod....................................226 V
drain plug........................................171 drives................................................186 lift arm support pin kit...............227 Valve cover gaskets..........................159
lift arms............................................227
ar
hood pad.........................................171 glow plugs......................................187 Valve cover stud grommets..........159
hoses........................................171, 172 key.....................................................188 lock....................................................228 Valve grind gasket sets...................159
mounting pad...............................171 repair studs.....................................187 pins...........................................226, 227 Valve train kits...................................160
radiators..................................170, 171 starter solenoids...........................187 rockshaft arm.................................226 Vane pump parts
rP
Radius rod parts starters.....................................186,187 stabilizer bar..........................227, 228 bearing.............................................220
ball cap.............................................208 switches...................................187,188 stabilizer kit....................................227 pressure plate................................220
ball socket.......................................208 tags....................................................187 top links...........................................226 rotor kits..........................................220
Rear end gaskets...............................215 Steering parts Throttle parts seal....................................................220
to
rear rim clamp...............................226 sector hardware and seal kit....206 washer..............................................201 Water temperature gauges...........175
rims.........................................224 - 226 sectors..............................................206 Tie rods, parts adapter pipe..................................175
stops.................................................226 shaft..................................................206 assys..................................................208 Weight mounting wedge..............226
studs.................................................225 shaft bearing kits..........................206 boots.................................................209 Wheels, front and rear
ends..........................................208, 209
er
.©
hand side of engine 1927.....................645611
block. Series 2000 (4-cyl.), 1928.....................739581
4000 (4-cyl.), 6000 1929.....................747584
Model 9N 1962..........................1001 1930.....................757265
nc
1939................................. 1 1963....................... 11948
New Holland
,I
1942....................... 89888 2000, 3000, 5000, hand clutch housing.
1943.....................105412 6600, 7000 serial The engine number
and model numbers is stamped on left
ts
Model 2N are stamped on hand side of block.
1942....................... 99003 the upper right
1943.....................105375 front corner of the Fordson Dexta
ar
1944.....................126538 transmission. Engine 1957................................. 1
1945.....................169982 serial number is 1958....................... 16066
1946.....................198731 stamped on left 1959....................... 22427
rP
1947.....................258504 or right pan rail of 1960....................... 45216
block. 1961....................... 72003
Model 8N
1947................................. 1 6000 serial number is Fordson Super Dexta
to
1951.....................343593 1964.......09D-900000-A
1952.....................442035 8000, 9000 ID is
located inside the Fordson Major
Late Model NAA, radiator filler cap Diesel, Fordson
Tr
FDS001 $71.50 FDS076GK $8.50 Gasket fits: 2000, 2600, 3000, 3400,
Manifold fits: 9N, 2N, 8N (1939-52) 3500, 3600, 4000, 4110, 4400, 4500, 4600
Replaces: 9N9425 3-cyl. gas, diesel (8000 - TW25 but
must order 2), Replaces: C5NE9448A,
FDS001GK3 $5.95 Gasket Set (For FDS001) USA made E8NN9448AA
FDS233 $5.95 Manifold Nut & Washer Kit ABC448 $18.99 Exhaust Manifold Gasket Material
(For FDS001), Replaces: 33816S, 34808S (1/16" thick x 12" wide x 28-1/2" long)
NOTE: (4) Brass nuts (7/16"-20); USA made NOTE: Perforated steel
Yellow zinc plated lock washers core.
(7/16"). If only a single nut is needed
order ABC1878.
.©
FDS002B $119.95 Manifold fits: NAA, Jubilee, 501,
Turbo charger, part
600, 700, 800, 900, 1801, 2000, 4000
Renew the performance of your engine with our line of new
nc
4-cyl. gas series (1953-64), Replaces:
aftermarket turbo chargers. This turbo charger has all new
New Holland
B9NN9425A
components assembled in a state of the art factory that
Ford
FDS002GK $10.95 Gasket Set (For FDS002B) USA made specializes in manufacturing turbo chargers. O.E.M. quality
,I
FDS1721 $7.95 Manifold Nut & Washer Kit at an aftermarket price - No core charge required. Includes
(For FDS002B), Replaces: 34673S8, mounting gaskets and an installation sheet. This is a direct
ts
only a single nut is needed order Order # Price Description / Application
Engine parts
ABC1878. ABC3690 $545.00 Turbo Charger (NEW not rebuilt)
ar
ABC1878 $1.75 Manifold Nut & Lockwasher w/ Mounting Gasket fits: TD70D,
(For FDS001, FDS002B) TD90D, TD95D, TN70, TN70A,
(7/16" - 20 UNF) NOTE: Brass nut, TN70D, TN70DA, TN70S, TN70SA,
rP
yellow zinc lock washer. TN70VA, TN75, TN75D (All using
Sold individually. Garret Air Research TA2505 turbo),
Replaces: 99462782 NOTE: Does not fit
FDS020 $19.95 Exhaust Elbow fits: Some NAA,
Mitsubishi turbo.
to
FDS021 $19.95
Exhaust Elbow fits: Some 601, 800, 900,
2"
1801, 2000, 4000 4-cyl. gas series
(1954-64) w/ FDS398 muffler,
er
.©
thickness per piston
The following fit Some Jubilee, NAA, 501, 600, 700, 2000 4-cyl. series gas, LP (1953-64)
FDS2098 $75.75 3-1/2" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring.
Piston rings can not be returned
NOTE: Not USA made
nc
if opened. Call or email for price
New Holland
The following fits Some 800, 900, 4000 4-cyl. series gas, LP (1954-64)
and availability of other sizes.
FDS2100 $73.95 3.900" bore, (2) 0.093" compression rings, (1) 0.187" oil ring
Ford
,I
FDS2102 $145.00 4" overbore, (3) 0.093" compression rings, (1) 0.187" oil ring
ts
Piston wrist pin bushings Cylinder sleeve liners cont...
Engine parts
NOTE: Sold individually. Requires reaming or boring after Order # Price Description / Application
ar
installation.
FDS4160 $26.95 NEW! Fits: 2N, 8N, 9N (1939-52)
Order # Price Application Replaces: 8N6055B (.090" thick, 3.368"
FDS3716 $3.45 prefinished O.D., 3.187" bore)
rP
NOTE: Use w/ FDS2976 kit.
Fits: 2N, 8N, 9N (1939-52)
Replaces: 21A6207A3, 21A6207B3
(0.735" I.D., 0.810" O.D., 1.314" o/a length)
to
(0.915" I.D., 0.973" O.D., 1.233" o/a length) Order # Price Application
FDS3769 $4.50 Fits: 2000 3-cyl., 2600, 2610, 2810, 2910, FDS3087 $312.50 Fits: Jubilee, 501, 600, 601, 700, 701, (2000
3000, 3600, 3610, 3900, 3910, 4000 3-cyl., 4-cyl.) gas w/ sleeved engine (1953-64),
er
4600, 4610, 5000, 5600, 5610, 5700, 6600, Replaces: CPN6055A (3.500" overbore)
6700, 6710, 7810, 7910, 8000, 8600, 8700,
FDS3090 $298.50 Fits: 800, 801, 900, 901, (4000 4-cyl.) gas
TW5, TW10, Industrials gas, LP, diesel
w/ sleeved engine (1954-64)
in
all applications.
St
FDS2976 $235.00 Fits: 9N, 2N, 8N (1939-52) ABC021 $33.95 Crankshaft Pulley fits: 9N, 2N, 8N (1939-
(Standard 3.187" bore 3-ring pistons) 52), Replaces: 192160 NOTE: Includes
NOTE: Includes (4) 0.090" thick sleeves. (4) 1/4" - 28 threaded holes for hub
FDS3457 $378.50 Fits: Jubilee, NAA, 501, 600, 601, 700, when used w/ front mounted loader.
701, (2000 4-cyl.) series w / 134 C.I. For drive hub order ABC1809.
gas, LP (1953-64), Replaces: 309519, ABC2058 $5.50 Front Crankshaft Seal fits: Jubilee - 4000
309553, 309976, CPN6008H, CPN6055A,
4-cyl. (1953-64), 6000 series (1961-67)
EAA6207A (3.500" overbore stepped
Replaces: C0NN6700A
head piston) NOTE: Governor seal not
(1.875" I.D., 2.571" O.D., 0.312" wide)
included.
FDS2412 $26.50 11-pc. Improved Rear Crankshaft Seal
.©
Kit fits: Jubilee - 4000 4-cyl. (1953-
64), 6000 series (1961-67), Replaces:
Crankshafts, parts C0NN6701A, EBU6701A, 84186689,
nc
NOTE: Bearings not included. B3NN6336A, C0NN6336A USA made
New Holland
Order # Price Description / Application NOTE: Rubber.
Ford
FDS207 $585.00 ABC3953 $4.99
NEW! Front Crankshaft Seal
,I
Crankshaft fits: 1710 (1983-86)
Fits: Fordson Major (1952-9/54)
Replaces: SBA115256261
Replaces: DKN6362A, E1ADKN6362A
ts
(2.500" I.D., 3.500" O.D., .438" wide)
FDS231 $585.00
Engine parts
Crankshaft fits: 1910 (1983-86) ABC1998 $8.50 Front Crankshaft Seal fits: 2000 3-cyl. -
ar
Replaces: SBA115256471 TW35 gas, LP, diesel (1965-90)
Replaces: C5NN6700A, D5NN6700A,
FDS2038 $42.50 87802755 (2.362" I.D., 3.268" O.D., 0.433"
rP
Crankshaft Gear fits: 9N, 2N, 8N (1939- wide) NOTE: See website for full
52), Replaces: 48-6306, 486306A, 48- applications.
6306A USA made NOTE: 22 teeth. FDS3756 $9.95 Rear Crankshaft Seal fits: 2000, 3000,
to
4-cyl., 4000 4-cyl. series (1953-64) gas, - TW35), Industrials (1965 - 2002)
diesel, Replaces: EAF6306B, 500223 Replaces: E5NN6701BA, 83955247
USA made NOTE: 21 teeth. NOTE: See website for all applications.
Tr
Crankshaft bearings
NOTE: Measure bearings before ordering, no returns if package has been opened.
er
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order # Price Description
in
FDS3987 $9.30 NEW! Connecting Rod Bearing (For 0.002" (2.093") undersize rod journal)
St
FDS2502 $8.99 Connecting Rod Bearing (For 0.010" (2.085") undersize rod journal)
FDS2504 $8.99 Connecting Rod Bearing (For 0.020" (2.075") undersize rod journal)
FDS2506 $8.99 Connecting Rod Bearing (For 0.030" (2.065") undersize rod journal)
FDS3982 $9.30 NEW! Connecting Rod Bearing (For 0.040" (2.055") undersize rod journal)
FDS2790 $44.95 Main Bearing Set (For standard 2.249" main journal size)
FDS2792 $44.95 Main Bearing Set (For 0.010" (2.239") undersize main journal) Crankshaft
bearings
FDS2794 $44.95 Main Bearing Set (For 0.020" (2.229") undersize main journal)
continue on
FDS2796 $44.95 Main Bearing Set (For 0.030" (2.219") undersize main journal) next page
FDS2798 $44.95 Main Bearing Set (For 0.040" (2.209") undersize main journal)
The following fit NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (through 1964); 6000 gas, LP, diesel (through 1967)
FDS2508 $9.95 Standard Connecting Rod Bearing (For standard 2.298" rod journal)
FDS2510 $9.95 Connecting Rod Bearing (For 0.010" (2.288") undersize rod journal)
FDS2512 $9.95 Connecting Rod Bearing (For 0.020" (2.278") undersize rod journal)
FDS2514 $9.95 Connecting Rod Bearing (For 0.030" (2.268") undersize rod journal)
The following fit Jubilee - 4000 4-cyl. w/ 134, 144, 172, 192 C.I. 4-cyl. gas, LP, diesel engines (through 1964)
.©
FDS2800 $39.99 Main Bearing Set (For 2.498" standard main journal)
FDS2802 $39.99 Main Bearing Set (For 0.010" (2.488") undersize main journal)
FDS2804 $39.99 Main Bearing Set (For 0.020" (2.478") undersize main journal)
nc
FDS2806 $39.99 Main Bearing Set (For 0.030" (2.468") undersize main journal)
New Holland
FDS2808 $49.99 Main Bearing Set (For 0.040" (2.458") undersize main journal)
Ford
,I
The following fit Dexta, Super Dexta w/ Perkins 3-cyl. 144, 152 C.I. gas, diesel
ABC2888 $14.95 Standard Connecting Rod Bearing 3-cyl. Set (For standard 2.249" rod journal)
ABC2890 $14.95 Connecting Rod Bearing 3-cyl. Set (For 0.010" (2.239") undersize rod journal)
ts
Engine parts
ABC2892 $14.95 Connecting Rod Bearings 3-cyl. Set (For 0.020" (2.229") undersize rod journal)
ar
ABC2894 $14.95 Connecting Rod Bearing 3-cyl. Set (For 0.030" (2.219") undersize rod journal)
The following fit Dexta, Super Dexta NOTE: Thrust washer not included.
ABC2898 $19.95 Main Bearing Set 3-cyl. (For standard 2.749" main journal)
rP
ABC2900 $19.95 Main Bearing Set 3-cyl. (For 0.010" (2.739") main journal)
ABC2902 $19.95 Main Bearing Set 3-cyl. (For 0.020" (2.729") main journal)
ABC2904 $19.95 Main Bearing Set 3-cyl. (For 0.030" (2.719") main journal)
to
The following Fordson Dexta, Fordson Super Dexta w/ 144, 152, 165, 203 C.I. Perkins gas, diesel
ABC2811 $7.99 4-pc. Thrust Washer Set (Standard (0.122") thick)
ac
FDS2810 $24.95 Connecting Rod Bearing Set (3-cyl.) (For (2.750") standard rod journal)
FDS2812 $24.50 Connecting Rod Bearing Set (3-cyl.) (For 0.010" (2.740") undersize rod journal)
FDS2814 $28.50 Connecting Rod Bearing Set (3-cyl.) (For 0.020" (2.730") undersize rod journal)
er
FDS2822 $59.95 Main Bearing Set (For (3.372") standard main journal size)
FDS2824 $59.95 Main Bearing Set (For 0.010" (3.362") undersize main journal)
FDS2826 $59.95 Main Bearing Set (For 0.020" (3.352") undersize main journal)
in
FDS2818 $49.00 Connecting Rod Bearing Set (6-cyl.) (For 0.010" (2.740") undersize rod journal)
St
FDS2820 $57.00 Connecting Rod Bearing Set (6-cyl.) (For 0.020" (2.730") undersize rod journal)
.©
w/ 7/16" head bolts) NOTE: 4" bore 82845200, 82845204 (0.037" thick head
or less, Order ABC3969 governor seal gasket) NOTE: Will not fit Dexta 2000
separate. series w/ Perkins 152" engine
nc
FDS3535 $26.95
Valve Grind Gasket Set (For 4.200"
New Holland
FDS3946 $84.95
(For 7/16" head bolts) fits: 800, 900 series bore engines) fits: 2310, 2600,
Ford
4 cyl. gas, LP (1954-57) (All w/ 172 C.I. 2610, 2810, 2910, 3600, 3610, 3900,
,I
engines w/ 7/16" head bolts) NOTE: Industrials (1975 - 2/90) (All 3-cyl.)
4-1/8" bore or less. Order ABC3969 gas, diesel, Replaces: D3NN6051E,
governor seal separate. 82845204, 82845222 (0.037" thick head
ts
gasket)
Engine parts
FDS1325 $87.10
Fits: 501, 600, 601, 700, 701, 800, 801, 900,
ar
FDS3702 $32.50 Valve Grind Gasket Set (For 4.400"
901, 4000 4-cyl. gas, LP series (1954-64)
bore engines) fits the following diesels
(All w/ 134, 172, 192 C.I. 4-cyl. gas, LP
from 1965 to 5/69: 4000 3-cyl., 4100,
engines) NOTE: 4-1/8" bore or less.
rP
4110, 4140, 4190, 4200, 4400, 4410, 4500,
Order ABC3969 governor seal separate.
Replaces: C7NN6051S, CFPN6008B
(0.037" thick head gasket, 9/16" head
bolts)
to
Valve grind gaskets, parts FDS3608 $32.50 Valve Grind Gasket Set (For 4.400"
NOTE: Includes all gaskets required when replacing the bore engines) fits: 3230, 3430, 3910,
ac
cylinder head. See website for all applications. 3930, (4000 3-cyl.), 4000 SU, (4110
Order # Price Description / Application 3-cyl.), (4130 3-cyl.), 4330, 4340, 4400,
4500, 4600, 4610, 4630, Industrials
FDS036VGK $25.95
(5/31/1969-89) (All w/ 3-cyl.
Tr
bolts)
FDS453 $2.65
Valve Side Cover Gasket only fits: 9N, FDS455 $13.25
Valve Cover Gasket fits: Jubilee, NAA,
2N, 8N (1939-52), Replaces: 7HA6521 501, 600, 700, 800, 900, 1801, 2000, 4000
in
FDS425 $69.95
Valve Grind Gasket Set (For 7/16" FDS1997 $6.95 Valve Cover Gasket fits: 2000 3-cyl.,
St
Gasket material - USA made FDS1770 $4.95 Pushrod Side Cover Grommets
NOTE: For making general purpose gaskets. Do not use for fits: Jubilee - 4000 4-cyl. (1953-64) gas,
high temperature applications. LP, diesel, Replaces: CONN6589A
NOTE: 3 used per tractor; Sold in sets
Order # Price Description / Application
of three.
ABC1830 $13.99
Cork / Rubber Rollpack Gasket Material
(1/16" thick x 12" wide x 24" long) Cylinder head, parts
NOTE: For valve train kits not listed please call.
Order # Price Description / Application
ABC1835 $16.25
Cork / Rubber Rollpack Gasket Material FDS036 $189.99 Cylinder Head fits: 9N, 2N, 8N (1939-52)
.©
(3/32" thick x 12" wide x 24" long) w/ front or side mounted distributors
Replaces: 8N6050A
nc
ABC1844 $15.99 FDS406 $4.50 Stud (For FDS036) (7/16" dia. x 3" long
New Holland
Gasket Paper (0.0160" thick x 18" wide x NC-NF) NOTE: Used for 15 of the 18
98" long) studs per engine; Sold individually.
Ford
,I
FDS466 $158.50 Valve Train Kit (For FDS036) fits: 9N, 2N,
8N (1939-52) (All w/ rotating exhaust
ABC1846 $22.99
valves) NOTE: Kit includes new valves,
ts
Gasket Paper (0.0275" thick x 20" wide x guides, guide clips, springs, locks,
108" long) retainers.
Engine parts
ar
FDS080 $799.95 NEW! Cylinder Head w/ Guides fits:
NAA, 501, 600, 601, 700, 701, 800, 801,
900, 901, 1811, 2000 4-cyl., 4000 4-cyl.
rP
(1953-64) (All w/ 134, 172, 192 C.I. 4-cyl.
Pushrods, parts gas engines), Replaces: 310098, 310100,
NOTE: Pushrods are sold individually.
D3JL6049B NOTE: Includes bushings
Order # Price Description / Application for 7/16 & 1/2" head bolts. Valves not
to
FDS2394 $9.95 Push Rod fits: Jubilee, NAA, 501, 600, included.
601, 700, 701, 800, 801, 900, 901, 1801, FDS464 $124.95 Valve Train Kit fits: Jubilee - 4000 4-cyl.
2000 4-cyl., 4000 4-cyl. (1953-64), 6000 (1953-64) (All w/ 134, 172, 192 C.I. 4-cyl.
ac
gas, LP, diesel, Replaces: EAA6565C, gas engines) NOTE: Kit includes new
EBP6565B, C0AE6565C, 500356 valves, guides, springs, locks. Does not
(9.61" o/a length, 5/16" O.D.) include retainers.
Tr
158-401 C.I. engines: 2000 3-cyl., 2600, spring length: 2.208") NOTE: See website
2610, 2810, 2910, 3000, 3600, 3610, for all applications.
4000 3-cyl., 4600, 4610, 5000, 5600,
e
8700, 9000, 9600, 9700, (TW5 - TW35), Order # Price Description / Application
Industrials (8/1965 - 12/2000) FDS3305 $179.99 Camshaft w/ Hardware fits: 501 - 981,
Replaces: C5NE6567B, 81813399 2000 4-cyl., 4000 4-cyl. (1955-64); Also
(12.174" o/a length) NOTE: Sold fits Jubilee - 960 gas, LP, diesel (1953-55)
individually. See website for all when converted to later cam & gear w/
applications. 5/16" dia. rear gear mounting bolts or
FDS1767 $6.50 using FDS3310 gear, Replaces: EAF6250F,
Pushrod Side Cover Gasket 310377, C0NN6251A, C0NN6251AGV
fits: Jubilee - 4000 4-cyl. (1953-64) gas, NOTE: Includes snap ring for front cam
LP, diesel, Replaces: EAF6521D gear, (4) 5/16"-18 bolts for rear gear &
Woodruff key.
FDS2036 $72.50 FDS3544 $7.95 Valve Lifter, Tappet fits: 2000 3-cyl., 2600,
Camshaft Gear (standard) fits: 9N, 2610, 2810, 2910, 3000, 3600, 3610, 3910,
2N, 8N (1939-52) (All w/ 4 bolt style 4000 3-cyl., 4600, 4610, 5000, 5600, 5700,
aluminum cam gear), Replaces: 5900, 6700, 7600, 7610, 7700, 7710, 7810,
91A6256A, 7RA6256A USA made 8000, 8600, 8700, 9000, 9600, 9700, (TB90
NOTE: Aluminum finish. 44 teeth. - TS110), (TW5 - TW35), Industrials (All
w/ 158 - 401 C.I. diesel engines 8/1965-
FDS2040 $52.50 Front Camshaft Gear (standard) 10/2000), Replaces: E4HN6500AA,
fits: Jubilee, NAA, 501, 600, 601, 700, 701, 83957729 (2.065" o/a length, 0.988" barrel
800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. dia., 1.235" lifter face O.D.) NOTE: Sold
series (1953-64) gas, diesel, Replaces: individually. Measure length before
.©
EAF6256M USA made ordering as early tractors used a longer
NOTE: 42 teeth. Cast iron, press fit. lifter. For use w/ 12.17" long push rod.
FDS3310 $49.95 Rear Camshaft Hydraulic Pump Drive See website for all applications.
nc
Gear fits: Jubilee - 960 (1953-55) when
New Holland
converted to later cam & gear w/ 5/16"
dia. mounting bolts (or using FDS3305
Ford
Oil fill / breather caps
,I
camshaft); 501 - 981, 2000 4-cyl., 4000
4-cyl. (1955-64) gas, LP, diesel Order # Price Description / Application
Replaces: EAF907B, 500010 FDS257 $28.75
ts
((4) 5/16" bolt holes) NOTE: 33 teeth. 1-pc. Oil Fill / Breather Cap fits: 9N,
Early tractors used 1/4" bolt holes. Bolts
Engine parts
2N, 8N (1939-50) w/ front mounted
on rear of camshaft w/ (4) 5/16" dia.
ar
distributor, Replaces: 9N6766
bolts. Measure before ordering. NOTE: Exact of original.
FDS2431 $1.99
Timing Gear Cover Gasket fits: 9N, 2N,
rP
(8N up to SN: 263843) (1939 - early 1950)
JDS500 $32.50 1-pc. Oil Fill / Breather Cap w/ Clip
(All w/ front mount distributor) & Copper Filter Element fits: 8N SN:
Replaces: 9N6020A USA made 247571 & up (1950-52) w/ side mounted
distributor, Replaces: 8N6766B
to
FDS2440 $2.45
Element fits: All Ford models (1939-64)
Timing Gear Cover Gasket fits: Jubilee -
Replaces: 8N6766B (1-1/2" tall)
4000 4-cyl. gas, LP, diesel (1953-64)
NOTE: Economy style.
Replaces: EAF6020B, F2NN6020AA,
er
500046 USA made ABC043 $14.15 Oil Fill / Breather Cap w/ Replaceable
Filter Element fits: Late 8N, NAA, Jubilee,
FDS3527 $12.85 Adjustable Valve Lifter, Tappet 541, 600, 700, 800, 900, 1801, 2000 4-cyl.,
in
fits: 2N, 8N, 9N (1939-52) (All w/ 120 4000 4-cyl. series (1950-64) gas, diesel
C.I. Flathead engine) (8 used) Replaces: 310030 (cap), 8N6782A (filter
Replaces: A0NN6500A element) NOTE: Exact of original.
e
.©
FDS3367 $9.95 Oil Filler Tube Cap fits: 2000 3-cyl. - TW35 NOTE: For the sheet metal oil pan only.
(1965-96), Replaces: D5NN6N609A,
83907851 (Expands from 1.165" O.D. -
nc
1.275" O.D.) NOTE: Twist plug style.
Oil filters
New Holland
,I
ABC045 $11.95
Oil Filter w/ Gasket, Cartridge Type
Oil pan parts fits: 9N, 2N, 8N (1939-52)
ts
Order # Price Description / Application Replaces: APN6731B (4-7/16" high,
Engine parts
ar
fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
601, 700, 701, 800, 801, 900, 901, 1801, 2000, ABC047 $15.99
Oil Filter w/ Gasket, Cartridge Type
4000 4-cyl. series (1939-64), Replaces: (For tractors which have not been
rP
9N6730WG (plug screen), 8N6734 (gasket) converted to spin-on type) fits: NAA,
ABC292 $1.15 Jubilee, 501, 600, 800 series (1953-59)
Replaces: CPN6731B (4-13/16" high,
Gasket only fits: Same as FDS246 3-15/32" O.D.) USA made
to
ABC1955 $1.75 Drain Plug Gasket / Washer fits: 2000 fits: Dexta, Super Dexta diesel (1957-64)
3-cyl. - TW35, etc. (1970-2/90) (All using Replaces: EPN6731B (4-1/2" high, 2-29/32"
3/4" I.D. drain plug) O.D.)
Tr
(1965-69) (All using 7/8" drain plug) C7NN6714A, C9NN6714A (5-13/32" high,
Replaces: C5NE6730B (7/8" - 18 UNF) 3-11/16" O.D.) USA made
USA made NOTE: White zinc finish.
in
Replaces: EBU6734A (.875" I.D.) 4-cyl., 4000 4-cyl. (1953-64) gas, LP, diesel
St
.©
9N6603, Replaces: APN6600A, 9N6608A Order # Price Application
NOTE: Kit contains (2) 9/16" wide gears,
ABC070 $33.75
main drive gear w/ shaft, bushing, Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
nc
gasket. Check gear width before 601, 700, 701, 800, 801, 900, 901, 1801, 2000,
New Holland
ordering. Bushing must be sized to fit.
4000 4-cyl. series (1939-64) gas, diesel
FDS381 $62.75 Oil Pump Repair Kit (For .725" wide oil Replaces: 9N6384 NOTE: 134 teeth.
Ford
,I
pump gears) fits: 8N SN: 247571 & up
(1950-52) & oil pump housing 8N6603 FDS3753 $31.33 Fits following diesels (1965-05): 2000, 3000,
Replaces: APN6600B, 8N6608 4000, 5000, 7000, 8000, 9000, 2600 - 9600,
NOTE: Kit contains (2) .725" wide gears,
ts
2610 - 8010, TB80 - TB120, TM115 - TM190,
main drive gear w/ shaft, bushing, TS90 - TS115, TW5 - TW35, Industrials;
Engine parts
gasket. Check gear width before Also fits 5000 (6/1971-75) gas
ar
ordering. Bushing must be sized to fit. Replaces: C5NE6384A, E2NN6384AA,
FDS481 $49.95 83949153 (14.520" I.D., 16.115" O.D., 0.625"
Oil Pump Pickup Tube w/ Plate wide) NOTE: 128 teeth. See website for
rP
fits: 9N, 2N, 8N (1939-52) all applications.
Replaces: 86604201, 8N6615, 9N6615
oil pump w/ slotted drive. FDS463 $21.25 Rear Hanger Bracket fits: 9N, 2N, 8N
FDS4248 $12.99 NEW! Hex Drive Oil Pump Intermediate (1939-52) w/ horizontal muffler
Shaft fits: 501, 600, 601, 700, 701, 800, 801, Replaces: 9N5260 (1-3/4") NOTE: Exact of
900, 901, 1801, 2000 4-cyl., 4000 4-cyl. gas, original. Fits FDS122, FDS3524 mufflers.
er
.©
ABC574 $3.25 (1-7/8" clamp) NOTE: Use w/ FDS398 or ABC576, ABC327, ABC2519, or ABC2625.
FDS3534 muffler - 1 end only.
ABC576 $3.25 (2" clamp) NOTE: Use w/ FDS398 - 1 end
nc
only, FDS402, FDS404 mufflers.
New Holland
,I
FDS122 $39.99 Fits: 9N, 2N, 8N gas (1939-52)
Replaces: 8N5230
Muffler heat shield FDS122 dimensions: MUFFLER - Inlet length:
ts
Fits: NAA - 4000 4-cyl. gas, diesel 2-1/2", Inlet I.D.: 1-1/2", Shell length: 23", Shell
Engine parts
ar
(25-3/4" long) O.D.: 1-1/2", Overall length: 34"; EXHAUST PIPE
Description Order # Price
- Flared inlet, Vertical length: 15-1/2", Horizontal
Muffler Heat Shield.........................................FDS2446............... $39.95 length: 22", Outlet O.D. = 1-1/2". Welded 1-piece
rP
assembly - muffler & exhaust pipe. If clamp is
needed order FDS116 & FDS463.
FDS121 $22.25 Fits: Some NAA, Jubilee, 501, 600, 601, 700,
Restoration quality mufflers 701, early 800, early 900 series, 2000 4-cyl.
to
NOTE: Original look, baffled for original sound. (All w/ 1-5/8" inlet I.D.) (1953-64)
Order # Price Application Replaces: NAA5230E
ac
FDS3524 dimensions: MUFFLER - Inlet FDS398 $28.99 Fits: Some (501, 601, 701 diesel), 800, 801,
length: 33-1/2", Inlet I.D.: 1-3/8", Shell length: 900, 901, 4000 4-cyl. (1958-64) w/ 172 C.I.
er
24", Shell diameter: 3", Outlet length = 9-1/2", gas, diesel (All w/ 2" inlet I.D.)
Outlet O.D.: 1-5/8", Overall length: 66"; Replaces: 310079
Welded 1-piece assembly - muffler & exhaust FDS398 dimensions: Inlet length: 2", Inlet
in
pipe. If clamp is needed order FDS116 & I.D.: 2", Shell length: 13-1/2", Shell diameter:
FDS463. 3-1/2", Outlet length: 1-1/2", Outlet O.D.: 1-7/8",
e
701, early 800, early 900 series, 2000 4-cyl. ABC327, ABC2519, or ABC2625.
(All w/ 1-5/8" inlet I.D.) (1953-64)
Replaces: NAA5230E, 82800460
FDS402 $61.99 Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500,
NOTE: Exact of original! Raised lettering 5000 gas, diesel 3-cyl. & 4-cyl. (1965-75) (All
reads "FOMOCO" & "NAA 5320 E". w/ purchase of FDS399 muffler adapter if
Measure inlet before ordering. not equipped w/ an existing adapter)
Replaces: C5NN5230AR
FDS3529 dimensions: Inlet length: 2-5/8", Inlet FDS402 dimensions: Inlet length: 5", Inlet I.D.:
I.D.: 1-5/8", Shell length: 15-1/2", Shell dia.: 1-7/8", Shell length: 10-3/4", Shell diameter:
3", Outlet length: 1-5/8", Outlet O.D.: 1-5/8", 4" x 8", Outlet length: 13-1/4", Outlet O.D.: 2",
Overall length: 17-3/4". Use w/ FDS020 elbow Overall length: 29", If raincap is needed order
& ABC360 or ABC572 clamps. RCS005. If clamp is needed order ABC576.
FDS404 $36.99 Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, RCS016 $45.95
4400, 4500, 4600, 5000 gas, diesel 3-cyl. &
(3-1/2" O.D.) USA made
4-cyl. (1965-84) (All w/ purchase of FDS399
NOTE: Chrome plated. Restoration
muffler adapter if not equipped w/ an
quality.
existing adapter), Replaces: C7NN5230AB,
C7NN5230AC, C7NN5230Z
FDS404 dimensions: Inlet length: 4-1/2", Inlet RCS005 $10.35
I.D.: 1-7/8", Shell length: 17", Shell diameter:
5-1/2", Outlet length: 7-1/2", Outlet O.D.: 2",
(2" - 2-3/16" O.D.)
Overall length: 29", If raincap is needed order
NOTE: Painted. Economy.
RCS005. If clamp is needed order ABC576.
.©
FDS399 $15.99 Muffler Adapter fits: 2000, 3000, 3400, 3500,
4000, 4400, 4500, 5000 gas, diesel 3-cyl. &
nc
4-cyl. (1965-75), Replaces: C3NN5255B
New Holland
NOTE: Does not fit 2600, 3600, 4600.
FDS399 dimensions: Inlet length: 1-1/2", Inlet Choke parts
Ford
,I
I.D.: 1-7/8", Shell length: 11-1/4", Outlet length: Order # Price Description / Application
2-3/4", Outlet O.D.: 1-7/8", Overall length: 15-1/2" FDS266 $23.99
ts
Choke Control Rod Assembly w/out
Knob fits: 9N, 2N (1939-47)
Engine parts
Exhaust pipes - USA made Replaces: 9N9700 (29-1/2" length)
ar
Order # Price Description / Application NOTE: Pre-bent.
FDS319 $25.60 Exhaust Pipe fits: Some NAA, Jubilee,
rP
501, 600, 601, 700, 701, early 800, early FDS262 $4.95
900 series, 2000 4-cyl. w/ 134 & 172 C.I.
gas, 4 & 5 speed transmissions & Select- Choke Knob fits: 9N, 2N, 8N, NAA,
O-Speed (1953-64), Replaces: NCA5255B Jubilee, 501, 600, 700, 800, 900, 1801,
to
FDS3529 muffler.
FDS124 $34.50 Horizontal Tail Pipe fits: Some NAA,
JDS718 $21.50
Jubilee, 501, 600, 601, 700, 701, 2000
Tr
series w/ 134 C.I. gas, Early 800 w/ 172 Metal Sheathed Choke Cable
C.I. gas (1953-64) (All w/ 4 or 5 speed fits: Tractors, Forklift & other
transmission), Replaces: NCA5263B applications using 47" or less cable
NOTE: Metal sheathed w/ "CHOKE"
FDS124 dimensions: 1-1/2" Inlet I.D.,
er
FDS450 $23.99 Exhaust Pipe fits: Some 800, 801, 1801, Universal Choke Cable fits: Tractors,
4000 4-cyl. w/ 172 C.I. gas (1958-64) Forklifts & other applications using 72"
Replaces: 311051 or less cable (72" long) NOTE: Metal
e
.©
FDS1178 $229.50 studs, 1/8" NPT fuel inlet w/ 5/16" tube
Carburetor (NEW, not Rebuilt) fits: adapter) USA made
NAA, Jubilee (1953-54) w/ 134 C.I. FDS3445 $458.50 Carburetor (NEW Zenith, not Rebuilt)
nc
engine, Replaces: EAE9510A, EAE9510C, fits: 3000, 3400, 3500, 3600, 3610 (1965-82)
New Holland
B2NN9510A, Marvel Schebler TSX 428 (All w/ 158, 175 C.I. engines), Replaces:
(2-1/4" c.c. mounting bolt pattern, 1/8" E1NN9510BA; Zenith 13914; Holley
Ford
,I
LIST6852, R3013-3, R4100, R4120, R4120-
1, R6863, R7893, R7896, R8553 (2-11/16"
FDS1183 $229.50 c.c. mounting studs, 1/8" NPT fuel inlet
Carburetor (NEW, not Rebuilt) fits: 600,
ts
w/ 5/16" tube adapter) USA made
700 (1954-57) w/ 134 C.I. engine
Engine parts
Replaces: EAE9510D, B4NN9510A, FDS3450 $458.50 Carburetor (NEW Zenith, not Rebuilt)
ar
Marvel Schebler TSX 580 (2-1/4"c.c. fits: 4000 3-cyl., 4100, 4110, 4140, 4200,
mounting studs, 3/8" fuel inlet threads) 4400, 4500, 4600, 4610, 515 - 555B (1965-
82) (All 3-cyl. w/ 201 C.I. engines)
rP
FDS1195 $229.50 Replaces: C5NN9510N, C9NN9510C,
Carburetor (NEW, not Rebuilt) fits: 501, E1NN9510CA; Zenith 13912; Holley
601, 701, 2000 4-cyl. (1957-64) w/ 134 R3210, R3657, R3658, R3658A, R4101,
C.I. engine, Replaces: 310746, 312954, R4111, R4111-1A, R6852, R8554 (2-11/16"
to
B8NN9510A, Marvel Schebler TSX 692, c.c. mounting studs, 1/8" NPT fuel inlet
765 (2-3/8" c.c. mounting studs) w/ 5/16" tube adapter) USA made
ABC297 $7.75 Carburetor Fuel Inlet Elbow & Strainer
ac
FDS3507 $399.99
Carburetor (NEW Zenith, not Rebuilt)
ABC230 $6.95 VITON Needle Float Valve (For Marvel
fits: Early 801, 901 series (All up to SN: Schebler carburetors) fits: 9N, 2N, 8N,
in
126524) (1957-60), Replaces: B8NN9510B, NAA, Jubilee, 600, 700 series (1939-57)
(All w/ TSX 33, 38, 83, 92, 241A,B,C, 420,
B9NN9510B, 312955, Zenith 13881;
428, 500, 534, 551, 580, 593 & w/ 120, 134
Marvel Schebler TSX 769 (2-11/16" c.c.
e
.©
(3/8"-24 thread) USA made Carburetor gaskets
ABC1152 $13.99 Main Nozzle (For Marvel Schebler
nc
carburetors) fits: 9N, 2N, 8N (1939-52) Order # Price Description / Application
w/ TSX 33, 38, 83, 241A,B,C, 420
New Holland
ABC408 $1.39 Manifold to Carburetor Gasket
Replaces: 9N9530, Marvel Schebler 47-
fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
Ford
180
,I
700 (1939-62) (All w/ TSX 33, 38, 83,
ABC1156 $23.95 Main Carburetor Nozzle (For Marvel 241A,B,C, 420, 428, 500, 580), Replaces:
Schebler carburetors) fits: NAA, 600, 700 9N9447 (2-3/8" - 2-7/16" slotted bolt
ts
(1953-57) (All w/ TSX428, 500, 577, 580) holes, 1-1/8" center hole) USA made
Replaces: Serviceable for 312949,
Engine parts
ABC416 $1.39 Manifold to Carburetor Gasket fits: 601,
EAE9530A, Marvel Schebler 47-270 701, some 800, some 900, 2000 4-cyl. (All
ar
ABC557 $29.95 Main Carburetor Nozzle (For Zenith w/ TSX 551, 577, 593, 692, 706, 765, 771);
carburetors) fits: 9N, 2N, 8N (1939-52) 134 C.I. (1958-64), 172 C.I. (1954-64)
(All w/ carb 10850, 11850) Replaces: EAF9447B (2-3/8" c.c. bolt
rP
Replaces: Zenith C66-47-50 USA made holes, 1-5/16" center hole) USA made
FDS1353 $35.50 ABC424 $1.39 Manifold to Carburetor Gasket fits: 801,
Throttle Shaft (For Holley carburetors) 901, 4000 4-cyl. series (1957-64) (All w/
to
fits: 2000 3-cyl. - 555B (1965-82) TSX 662, 769, 813, 966, 970, 972, 973, 977,
Replaces: C5NE9581A 988, 989), Replaces: C5NE9447A
(2-11/16" c.c. bolt holes, 1-1/2" center
ac
ABC513 $2.55 Throttle Body Repair Bushing (For small hole) NOTE: Perforated steel core.
bowl Marvel Schebler carburetors) ABC3233 $3.50 Carburetor Gasket Kit (For small bowl
fits: 9N - (Early 900 w/ TSX 593, 706) Marvel Schebler carburetors) fits: 9N,
Tr
(1939-57) (0.247" I.D., 0.383" O.D., 0.501" 2N, 8N (All w/ TSX 33, 241A, B, C, 420);
length) USA made NOTE: Repairs worn NAA, Jubilee both w/ TSX 428; 600, 700
throttle body using 1/4" throttle shafts. both w/ TSX 500, 577, 580, 692, 765; 800
Must ream to size. w/ TSX 551, 593, 706, 771; 900 w/ TSX
er
ABC1159 $4.99 Throttle Disc (For Marvel Schebler 551, 593, 706; 2000 4-cyl. w/ TSX 500,
carburetors) fits: 9N, 2N, 8N, NAA, 600, 577, 580, 692, 765, 976; Power Units w/
700 (1939-57) (All w/ TSX 33, 241B, 428, TSX 38, 83, 420, 534, 577, 771, 971, 976,
in
500, 580), Replaces: 9N9585, 14-175 987, 996 (1939-64), Replaces: 9N9502
(15 degrees, 1.105" O.D.) USA made (4-5/16" o/a bowl gasket length)
NOTE: Steel. USA made
e
ABC036 $12.90 (For small bowl Marvel Schebler ABC220 $23.50 Economy Carburetor Repair Kit
carburetors) fits: 9N, 2N, 8N, NAA, (For Marvel Schebler carburetors)
Jubilee, 501, 600, 700 w/ 134 C.I. gas fits: 9N, 2N, 8N (All w/ TSX 33, 241A,B,C,
engine; Early 800, 900 4-cyl. series w/ 172 420); NAA, Jubilee both w/ TSX 428; 600,
C.I. gas engine (1939-57) (All w/ TSX 33, 700 both w/ TSX 500, 577, 580, 692, 765;
241A, B, C, 428, 500, 551, 580, 593, 692, 800 w/ TSX 551, 593, 706, 771; 900 w/
706, 765); Power Units w/ TSX 38, 83, 420, TSX 551, 593, 706; 2000 4-cyl. (1939-64) w/
534, 577, 771, 971, 976, 987, 996, Replaces: TSX 500, 577, 580, 692, 765, 976; Power
9N9550A, Marvel Schebler 30-600 Units w/ TSX 38, 83, 420, 534, 577, 771,
ABC037 $19.95
971, 976, 987, 996
(For Marvel Schebler carburetors) fits: 800 ABC1346 $26.50 Economy Carburetor Repair Kit
.©
w/ TSX 801, 901; 1801 series, 4000 (1958- (For Zenith carburetors) fits: 9N, 2N, 8N,
64) (All w/ TSX 662, 769, 813, 977); Power NAA, Jubilee, 501, 600, 601, 700, 701, 800,
Units w/ TSX 966, 972, 973, 988, 989, 993, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. (1939-
nc
994, 997, 998, Replaces: 311608, Marvel 64) All w/ carb 9544, 10850, 11294, 11850,
New Holland
Schebler 30-631, 30-739, Zenith C85-156 A, 12492, 12493, 12494, 12544, 12566,
13876, 13877, 13878, 13879, 13880
Ford
,I
ABC190 $15.95
ABC1349 $24.95
(For Zenith carburetors) fits: 9N, 2N, 8N, Economy Carburetor Repair Kit
NAA, 600, 700, 800, 900 (1939-57) (All w/ (For Zenith carburetors) fits: 800, 4000
(1954-64) both w/ carb 12471, 13875; 6000
ts
carb 10850, 11850, 12492, 12493, 12522,
(1961-66) w/ carb 12902, Replaces: Zenith
Engine parts
ar
FDS212 $23.50 Economy Carburetor Repair Kit
ABC452 $23.50 (For Zenith carburetors) fits: 800, 2000 (For Marvel Schebler carburetors)
rP
3-cyl., 3000, 4000 3-cyl., 5000, 6000 (1954- fits: 800, 900, 1801, 4000 4-cyl. series,
82) (All w/ carb 12471, 12472, 12902, (1954-64) Power Units (All w/ TSX 844,
13875, 13881, 13912, 13913, 13914, 13958, 884, 966, 972, 973, 988, 989, 993, 994, 997,
13960, 13961); Power Units w/ carb 998)
to
(unless noted), float lever pin, seal, gaskets & instructions. 3-cyl. - 5100 (1965-82) (All w/ Holley
R3158A, R3589B, R3655A, R3656A,
Complete carburetor repair kits include choke & throttle R3657, R3657A, R3658, R3658-1AR4111,
shafts, needle & seat (unless noted), float lever pin, R4111-1A, 4111A, R4119, R4119-1A,
miscellaneous plugs & screws, throttle shaft seals, adjustment R4119A, R4120, R4120-1, LIST6852,
screw & gaskets. R6852, R6852-A, R6853, R6863, R6863-A,
R7867, R7896, R8552, R8553, R8554)
Premium carburetor repair kits include throttle shaft, throttle
NOTE: Includes repair components for
plate, choke shaft, choke plate, throttle shaft bushings and
acceleration pump, piston assembly,
packing, metering nozzle, brass plugs, float pin, needle & seat,
spring, retainer. Float valve seat not
drain petcock, gaskets, fuel strainer & more.
included.
Economy Carburetor Repair Kits cont... Premium Carburetor Repair Kits cont...
ABC1918 $36.95 Economy Carburetor Kit (For Holley FDS3589 $58.95
Premium Carburetor Repair Kit
carburetors) fits: 2000 3-cyl. - 5200
(For Marvel Schebler carburetors)
(1965-82) (All w/ Holley LIST2923-1A,
fits: NAA, Jubilee, Early 600, 700 series
LIST2923-2, LIST2923-3, LIST3012-2,
(1953-57) w/ TSX 428, 500
LIST3013-2, LIST3658-2, R2923A, R2923-
1A, R2923-2A, R2923-3A, R2923-4A, FDS3592 $58.95
R3012A, R3012-1A, R3012-2A, R3012- Premium Carburetor Repair Kit
3A, R3013A, R3013-1A, R3013-2A, (For Marvel Schebler carburetor)
R3013-3A, R3013-4A, R3210, R3210A, fits: Early 600, 700 series (1954-57)
R3210-1A, ); Also fits Ford OEM carbs w/ TSX 580
.©
C5NE9510E, C5NE9510G, C5NE9510H,
FDS3598 $58.95
C5NE9510J, C5NE9510K, C5NE9510L, Premium Carburetor Repair Kit
C5NE9510S, C5NN9510D, C5NN9510E, (For Marvel Schebler carburetor)
nc
C5NN9510F, C5NN9510G, C5NN9510L fits: 501, 541, 601, 701 series (1957-62)
NOTE: Includes repair components for
New Holland
w/ TSX 692
acceleration pump, piston assy, spring,
Ford
retainer. Float valve seat & diaphragm FDS3604 $58.95
,I
not included. Premium Carburetor Repair Kit
Complete Carburetor Repair Kits (For Marvel Schebler carburetor)
fits: 601, 2000 4-cyl. series (1957-64)
ts
ABC031 $44.95
Complete Carburetor Repair Kit (All w/ TSX 765)
Engine parts
(For Marvel Schebler carburetors)
ar
FDS3595 $58.95
fits: 9N, 2N, 8N (1939-52) (All w/ TSX 33, Premium Carburetor Repair Kit
241A,B,C, 420) (For Marvel Schebler carburetors)
fits: Early 800, 900 series (1954-57)
rP
ABC034 $48.95 w/ TSX 593, 706
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
FDS3601 $58.95
fits: NAA, Jubilee (1953-54) both w/ TSX Premium Carburetor Repair Kit
to
428; 600, 700 (1954-57) both w/ TSX 500, (For Marvel Schebler carburetors)
580 (All w/ 134 C.I. gas engine) fits: 801, 901, 1801, 4000 4-cyl. series
(1957-64) w/ TSX 662, 769, 813
ac
ABC212 $48.95
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
fits: 501, 601, 701, 2000 4-cyl. w/ 134 C.I.
Tr
.©
7710, 7810, 7910, 8000, 8600, 8700, 9000, distributor, Replaces: 8N6018
9600, 9700, TW5 - TW35; Industrials:
230A - 7500 (1965-90), Replaces: FDS1278 $18.95 Governor Compensating End & Spring
C5NE9F596A NOTE: See website for
nc
Assembly fits: NAA - 960 (1953-57)
all applications. Kit includes (1) cork when using a flyweight style governor;
New Holland
seal, (1) copper injector washer, (2) 501 - 4140 4-cyl. (1958-64) gas, LP w/
Ford
leak off / return line copper washers. engine SN: 26402 & up, Replaces:
,I
3 to 6 used per engine; NCA99810A (1/4"-28 thread)
Sold individually.
FDS1921 $5.95 Governor Compensating Spring
ts
fits: NAA, Jubilee, Golden Jubilee
Engine / Cooling parts
ar
wire dia) USA made NOTE: Mounts
Order # Price Description / Application
between bellcrank & underneath
ABC027 $235.99 battery tray.
rP
Governor Assembly (Complete 3 Arm)
FDS1917 $5.95 Governor Compensating Spring fits:
fits: 9N, 2N (1939-47) w/out proofmeter 501, 600 - 4000 4-cyl. (1954-64) gas, LP
drive, Replaces: 9N18200C USA made Replaces: NCA9827A (6.535" o/a
to
ABC028 $239.99
ABC3969 $6.50 NEW! Governor Shaft Oil Seal fits:
Governor Assembly (Complete 3 Arm) Jubilee, NAA, 501, 600, 601, 700, 701,
fits: 8N (1947-52) w/ proofmeter drive 800, 801, 900, 901, 2000 4 cyl., 4000 4
Tr
Radiators, parts
ball bearing, C-clip, shim, 5/8"
Order # Price Description / Application
governor balls.
FDS1859 $306.50
e
ABC030 $166.30 Complete Governor Repair Kit fits: Heavy Duty Radiator (For Pressurized
system) fits: 9N, 2N, 8N (1939-52),
St
.©
(1939-90), Replaces: 81465471, 9N8115B,
C9NN8115A (1/4"-18 NPT) USA made Underside view
NOTE: See website for full applications.
nc
ABC1398 $5.95
Radiator Cap w/ Gasket (For (7 PSI)
New Holland
(7 PSI)
ABC057 $2.49 Pressurized systems) (For radiators w/
3/4" tall filler neck) fits: 2000 3-cyl. - TW35
Ford
Radiator Hood Pad fits: 9N, 2N, 8N
,I
(1965-90)
(1939-52), Replaces: 2N8032
ABC1398: Replaces: DOHA8100C,
USA made
Underside view 81855444, 83935904 (2.330" O.D.,
ts
2.000" tang to tang, 1.096" tall)
Cooling parts
ABC1394 $5.25
ABC455 $2.95 Radiator Mounting Pad fits: 9N, 2N,
(13 PSI)
8N, NAA, Jubilee, 541, 600, 700, 800, ABC1394: Replaces: E5TH8100AA,
ar
900, 1801, 2000, 2310, 2600, 2610, 2810, E5TH8100AADS, E2NN8100BA, 83956266,
2910, 3000, 3600, 3610, 3910, 4000, 4100, 83957211, 83935905 (2.333" O.D., 2.000"
4600, 4610, 5000, 5600, 6600, 7000, 7600;
rP
tang to tang, 1.096" tall) NOTE: See
Industrials: 1801, 3400, 3500, 4400, Underside view website for full applications.
4500 (1965-90), Replaces: B9NN8125A,
C0NN8125A; If trimmed can replace
to
Radiator caps w/ gaskets ABC3999 $34.95 (2-1/4" I.D., 2-5/8" O.D., 3' long)
Order # Price Description / Application
ABC4003 $44.95 (2-3/8" I.D., 2-3/4" O.D., 3' long)
e
FDS039 $12.95
ABC4007 $49.95 (2-7/8" I.D., 3-1/4" O.D., 3' long)
(Black)
St
Wing Radiator Cap (For (4 PSI) ABC4012 $49.95 (3" I.D., 3-3/8" O.D., 3' long)
Pressurized systems) fits: 9N, 2N, 8N (Will
not fit Early 9N & 2N w/ ORIGINAL
non-pressurized radiator 1939 through From a satisfied customer!
12/1943), Replaces: 9N8100, 2N8100A
FDS343 $16.75 NOTE: Pressurized radiators will have “I am very impressed with your fast shipping
(Chrome filler neck with slots on the outside for
Plated) the cap. Non-pressurized radiators will
and care when shipping products. I will
have the slots for the cap on the inside of continue to be a future customer and spread
the radiator neck. the word about your quality business! ”
- Hunter D.
ABC055 $6.85 Radiator Hose (Cylinder head to radiator FDS258 $3.75 Clamp (For 1-3/4" to 2" O.D. hose)
upper) fits: 9N, 2N, 8N (1939-52) Fits upper and lower radiator hose: 9N,
Replaces: 2N8260 (1-7/16" I.D., 10" long, 2N, 8N (1939-52); Fits lower radiator hose:
1-13/16" O.D.) Jubilee, NAA, 501, 600, 700, 800, 900, 1801
series, 2000 4-cyl., 4000 4-cyl. (1953-1964);
ABC053 $8.95 Radiator Hose (Water pump to radiator
Fits upper radiator hose: 2000 3-cyl. - 7700
lower) fits: 9N, 2N, 8N up to SN: 263843
(All diesels 1965-81), 2310 - 7610 w/out air
(1939-50); NAA, Jubilee, 501, 600, 700, 800,
conditioning (1982-92), Replaces: 60-8287
900, 1801, 2000 4-cyl., 4000 4-cyl. series
(1953-64) (All w/out power steering)
Replaces: 312588 (1-1/2" I.D.)
.©
ABC054 $9.55 Radiator Hose (Water pump to radiator NEW! Worm drive hose
lower) fits: 8N SN: 263844 & up (1950-52) clamps - USA made
w/ side mounted distributor NOTE: Premium stainless steel.
nc
Replaces: 8N8286 (1-1/2" I.D.) Sold in packs of 10.
New Holland
FDS4132 $14.50 NEW! Radiator Hose (Water Pump to Order # Price Specifications
Radiator Lower) fits: 501, 601, 701, 801,
Ford
,I
901, 1801, 2000 4-cyl., 4000 4-cyl. series
(1958-64) (All w/ power steering) ABC4142 $6.92 (3/8" - 7/8" range, 5/16" band width)
Replaces: 313151 ABC4147 $7.18 (7/16" - 1" range, 5/16" band width)
ts
ABC056 $4.99 Radiator Hose (Radiator upper) fits: NAA, ABC4151 $9.44 (1/2" - 1-1/16" range, 1/2" band width)
Cooling parts
ar
4-cyl., 4000 4-cyl. series (1953-64) gas,
diesel, Replaces: NAA8260B, 310048 ABC4158 $10.04 (11/16" - 1-1/2" range, 1/2" band width)
(1-1/4" I.D. x 7-3/8" length) ABC4161 $10.45 (3/4" - 1-3/4" range, 1/2" band width)
rP
FDS4123 $12.95 NEW! Radiator Hose (Radiator upper) ABC4165 $10.58 (1" - 2" range, 1/2" band width)
fits the following gas: 2000 3-cyl. - 5000, ABC4180 $13.31 (1" - 3" range, 1/2" band width)
2600 - 4600, 2110 3-cyl. - 4610; Industrials:
ABC4169 $10.82 (1-1/4" - 2-1/4" range, 1/2" band width)
230A - 545, 3400 - 4500 (1965-2/90),
to
Replaces: C5NN8260D (1-1/2" I.D.) ABC4172 $11.39 (1-1/2" - 2-1/2" range, 1/2" band width)
FDS1367 $6.35 Radiator Hose (Radiator upper) fits the ABC4176 $11.67 (1-3/4" - 2-3/4" range, 1/2" band width)
ac
following diesels: 2000 3-cyl. - 7700 (1965- ABC4184 $13.55 (2-1/4" - 3-1/4" range, 1/2" band width)
81); 2310 - 7610 w/out air conditioning
ABC4188 $14.46 (2-1/2" - 3-1/2" range, 1/2" band width)
(1982-92), Replaces: C5NN8260A,
ABC4204 $16.51 (2-1/2" - 4-1/2" range, 1/2" band width)
Tr
.©
2000 3-cyl. - 9000, 2310 - 7710, 2600 - 9700, ABC058 $14.95 Fan Belt (For tractors w/ generators not
TB80 - TB110, TS90 - TS115, TW10, TW20, w/ alternator conversion) fits: 9N, 2N,
TW30; Industrial: 230A - 755B, 3400 - (8N up to SN: 263843) (1939-50) w/ front
nc
7500, A62 - A66, LB90 - LB115 gas, diesel mounted distributor, Replaces: 9N8620B
New Holland
(1965-03/2006), Replaces: C2DE8255A, (Notched; 11/16" x 46-1/2")
Ford
E9NN8255AA, EIADKN8587, 83999978 ABC059 $12.95 Fan Belt (For tractors w/ generators or
,I
(2-7/8" c.c. holes) alternator conversion) fits: Late 8N SN:
263844 & up (1950-52) w/ side mounted
distributor, NAA, Jubilee (1952-54), Ford
ts
models w/ Delco 10 SI style alternator
Cooling parts
Fan shrouds, hardware Replaces: 8N8620 (Notched; 5/8" x 40")
ar
Order # Price Description / Application
FDS1091 $14.00 Alternator Fan Belt fits: 9N, 2N, (8N up
FDS082 $60.05 to SN: 263843) (1939-50) (All w/ front
Fan Shroud fits: 9N, 2N, 8N (1939-52) mounted distributor) (11/16" x 43")
rP
Replaces: 2N8146 ABC191 $10.30 Fan Belt (For generator only) fits: 501, 600,
700, 800, 900, 1801, 2000, 4000 series 4-cyl.
FDS236 $65.95 Fan Shroud fits: NAA, Jubilee, 501, (1954-64) gas, diesel, Replaces: EAF8577A
(33/64" x 40-3/4")
to
Fan Blade (4 Blade) fits: 9N, 2N, 8N, NAA, w/out 72 amp/alt); 976, 5530, 5610,
Jubilee (1939-54), Replaces: 8N8600A 6700, 6710, A62 (1978-93), Replaces:
D8NN8620A, C5TE8620A (17/32" wide x
45-1/4" long) USA made
FDS4167 $44.95 IHS235 $9.50 Alternator Fan Belt fits the following
w/ 72-80 AMP alternators: Some
NEW! Fan Blade (6 Blade) fits: 9N, 2N, 8N,
540 - 550 diesel w/ air conditioning,
NAA, Golden Jubilee, Jubilee (1939-54) 5110, 5610, 6410, 6610, 7610, 7710, 7810
Replaces: 9N8600B, 9N8600D All w/ cab (10/1/1985-93), Replaces:
(15-3/4" O.D., 3-1/8" c.c. mounting holes) E4NN10C318AA, 86514615
(1/2" x 30-1/4")
.©
does not include rear housing. Pump has
FDS055 $66.15 5/16" & 7/16" dia. mounting holes and
Fits: 501, 600, 700, 800, 900, 1801, 2000
replaces earlier style pump w/ 5/16" &
nc
4-cyl., 4000 4-cyl. series (1954-64) gas,
3/8" dia. mounting holes.
diesel, Replaces: CDPN8501C
New Holland
KUB4129 $69.99
(4-3/8" o/a pulley length) NOTE:
Ford
,I
& L455 w/ D1402B Kubota engine, L553
FDS2259 $59.95 & L555 w/ V1902B Kubota engine
Fits: Fordson Major, Fordson Super Replaces: 503180
ts
Major, Fordson Power Major gas, diesel
Cooling parts / Gauges
FDS3937 $82.45
ar
Ammeters
rP
For 2" diameter hole.
NEW! Fits: Early 1000 (1973-10/74) Order # Price Description / Application
w/ 3/8" belt width & 4 blade fan ABC016 $13.00
Replaces: 145016022, SBA145016022
(20-0-20) fits: 9N, 2N, 8N, NAA, Jubilee,
to
Replaces: SBA145016540
600, 700, 800, 900 (1939-57)
Replaces: A0NN10670A (Terminal type)
e
FDS4144 $84.95
St
FDS4157 $56.35
ABC2238 $15.50
NEW! Fits: 1720, 1920, (2120 4-cyl. diesel
Japanese compact), 3415 (all 1987-02) (60-0-60) fits: 9N - 960 (1939-57) w/
Replaces: SBA145017780 Alternator systems (Terminal type)
(5/8" hose barb) USA made NOTE: Black bezel.
FDS1848 $37.50 Dash Panel Warning Light Set (Oil FDS486 $8.95 Oil Gauge Line to Block Elbow
Pressure & Generator) w/ Wires & Bulb (Oil Terminal Block) fits: 9N, 2N (1939-47)
Holders fits: Dexta, Super Dexta (1957- Replaces: 9N6722 (1/4" NPT male, 1/4"
64) both w/ 12-volt systems, Replaces: tube & 3/16" tube)
E203NE9, E204NE9 (0.550" O.D. lense,
FDS488 $9.99
0.822" outer housing dia., 1.715" o/a Oil Gauge Line to Block Elbow fits: 8N
length, 1.010" flange mounting dia.) (1947-52), Replaces: 8N6722 (1/4" NPT
NOTE: Red & green lenses. male pipe fitting, (2) 1/4" flare fittings)
FDS2476 $13.95 Generator / Select-o-Speed Transmission ABC2360 $3.95 Oil Gauge Adapter Fitting (For gauges
Temperature Warning Light w/ 'PAL' w/out removable fitting) fits: 2N, 9N
nut fits: 501 - 5000; Industrial: 340 - 655A (1939-47), Replaces: 9N18685
.©
(1957-88), Replaces: 310124, B9NN10241B, (1/8" NPT female to 3/16" tubing female)
373348S (nut) (Flange is 0.875" O.D., 3/4"
ABC2353 $3.95 Oil Gauge Adapter Fitting (For gauges
- 20 NF thread, 0.885" tall) NOTE: See
nc
w/out removable fitting) fits: 8N (1947-
website for full applications.
New Holland
52), Replaces: 8N18685 (1/8" NPT female
to 1/4" tubing female)
Ford
,I
ABC538 $13.95 Oil Gauge Fitting (For gauges w/out
Oil pressure gauges, parts removable fitting) (1/8" NPT to 1/8"
For 2" diameter hole. compression) USA made
ts
When ordering a dash mounted oil pressure gauge you also NOTE: Use w/ ABC523 line kit.
need to order (1) of the oil gauge fittings depending on the IHS626 $12.95 Oil Gauge Fitting (For gauges w/out
ar
line size to adapt your existing line to the gauge: ABC538, removable fitting) (1/8" NPT to 1/4"
Gauges
IHS626, ABC2353, ABC2360. compression) USA made
Order # Price Description / Application
rP
FDS405 $14.95
(0-50 PSI) fits: 9N, 2N, 8N (1939-52)
Water temperature gauges, part
Replaces: 9N9273A (1/8" NPT male
For 2" diameter hole.
thread) NOTE: Black bezel. Line adapter
to
FDS401 $14.95 (0-80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee,
FDS2424 $29.95 Water Temperature Gauge w/ Bracket
er
541, 600, 700, 800, 900, 1801, 2000 4-cyl., fits: 9N, 2N, 8N (1939-52) using FDS2673
4000 4-cyl. series (1939-64), Replaces: Adapter; NAA, Jubilee, 501, 600, 700, 800,
FAD9273A (1/8" NPT male thread) 900, 1801, 2000, 4000 4-cyl. series (1953-64)
in
NOTE: Black bezel. Line adapter sold gas, diesel except Majors, Dexta, Replaces:
separately. C3NN18287A (36" lead) NOTE: Black bezel.
ABC081 $29.95 Water Temperature Gauge fits: 9N, 2N,
e
ABC005 $19.95 (0-80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee,
8N (1939-52) using FDS2673 adapter;
541, 600, 700, 800, 900, 1801, 2000 4-cyl.,
St
.©
(14-122 Ohm) NOTE: Will work w/ copper float, stainless steel construction,
FDS199 & FDS200 fuel sending units. & premium ceramic resistor.
FDS3488 $47.95
nc
Fuel Sending Unit w/ Gasket (Lock ring
New Holland
,I
Fuel sending units, parts
Replaces: C5NN9A316A, D8NN9A316JA
Order # Price Description / Application
(30 - 250 OHMS, 17-1/4" o/a length
FDS200 $24.50 6-volt Positive Ground / 12-volt Negative (extended)) NOTE: Top quality w/ copper
ts
Ground Fuel Sending Unit fits: 601, 701, float, stainless steel construction, &
2000 4-cyl. series (1958-64) gas, diesel w/ premium ceramic resistor.
ar
6-volt or 12-volt systems, Replaces: 310938
Gauges
(6-volt), 310939 (12-volt) (5-1/2" long, FDS3501 $47.95 Fuel Sending Unit w/ Gasket (5 hole
Resistance = 14 - 122 OHM range) mount type) fits: Some 5010 up to
rP
NOTE: Use w/ FDS275 & FDS276 fuel 8/22/1999; 5110, 5610, 6610, 7610 (All
gauges & FDS178 fuel tank. Does not 12/1983-92); 5200; 5600, 6600, 7600 (All
work w/ O.E.M. style fuel gauges 6/1979-81); 5610S, 5900, 6410, 6810, 7000,
7010, 7100 (1971-91)
FDS199 $24.50 6-volt Positive Ground / 12-volt Negative
to
Sending Unit Lock Ring fits: Same 6610, 7610 (1982-11/83), 7000, 7100 (1971-
as FDS199, FDS200; 6000, Replaces: 75), Replaces: C5NN9N283A, 81811218
FEG99275A (2.682" O.D., 1.895" I.D.) NOTE: 3 locking tangs.
in
FDS389 $99.95 Dash Gauge Cluster Assembly fits: FDS1491 $8.15 Electric Water Temperature Sending Unit
Some 2000, 3000, 3400, 3500, 4000, 4400, w/ Adapter Bushing fits: 2000 3-cyl.
4500 (1965-74), 5000 (1965-75), Replaces: series, 2600, 3000 series, 4600, 4000 3-cyl.
C5NN10849L, EHPN10849A series, 4600, 5000 series, 5600, 6600, 7000
NOTE: Clockwise needle rotation. For series, 7600, 8000, 8600, 9000, 9600, 9700,
generator equipped tractors or when TW10, TW20, TW30; Industrial: 231 -
converted to an aftermarket alternator. 340B, 3400, 3500, 3550, 420 - 4500, 515
Verify rotation of old cluster before - 755B (1965-83), Replaces: C4AH10884A,
ordering. D5NN10884A,B, 81784077, 83903061,
FDS391 $99.95 Dash Gauge Cluster Assembly fits: 2310, 87554838, 87712906 NOTE: Fits either
2600, 2610, 2810, 2910, 3600, 3610, 3900, 1/8" NPT or 3/8" NPT thread size as
.©
3910, 4100, 4110, 4600, 4600 SU, 4610, 5110, adapter bushing is including.
5600, 5610, 5900, 6410, 6600, 6610 6810,
7000, 7600, 7610; (1975-91) Industrials:
nc
230A, 231, 233, 234, 250C, 333, 334, 335,
New Holland
340, 340A, 420, 445, 445A, 450, 515, 530A,
Tachometers, parts
Order # Price Description / Application
Ford
531, 532, 535, 540, 540A, 540B, 545, 545A,
,I
550, 555, 555A, 555B, 655, 655A (1981-88) FDS058 $39.00
Replaces: 83953544, D8NN10849TB,
E5NN10849BA, E7NN10849BA Tachometer fits: 8N SN: 290271 & up
ts
NOTE: Counter-clockwise needle (1950-52), Replaces: 8N17360A1
rotation. Verify rotation of old cluster
ar
before ordering.
Gauges
FDS1726 $18.50
FDS060 $55.00
Cluster Gauge Gasket fits: Same as Tachometer (4 Speed) w/ O.E.M. style
rP
FDS389, FDS39, Replaces: C5NN10A949C needle fits: Jubilee, NAA, 501, 600,
USA made 700, 800, 900, 1801, 2000, 4000 4-cyl.
series (1953-64) gas, diesel, Replaces:
C3NN17360N
to
FDS423 $16.95
Tachometer Cable w/ Metal Sheath
FDS062 $55.00
(For FDS389, FDS391)
ac
FDS3752 $14.95
Replaces: C3NN17360K
Tachometer Drive Assembly (For Lucas
Generators) fits: 2000, 3000, 3400, 4000,
FDS396 $42.75
4400, 4500, 5000, 8000, 9000 (1965-74) Tachometer (Select-O-Speed) fits: 611, 671,
er
Replaces: C5NF17B282B 681, 771, 811, 871, 881, 971, 981, 1811, 1871,
NOTE: Fits FDS403 generator. 1881, 2111 4-cyl, 4121 4-cyl. series (1959-
64) gas, diesel (All w/ Select-O-Speed
in
.©
ABC421 $22.99 (2 Gauge, EO = 3/8", L = 19")
ABC403 $24.99 (2 Gauge, EO = 7/16", L = 24")
nc
Tachometer cables Insulated Battery Cables
Gauges / Electrical parts New Holland
FDS147 $15.95 Tachometer Cable Assembly w/ Metal ABC415 $16.99 (2 Gauge, EO = 3/8", L = 12")
,I
Sheath fits: 8N SN: 290271 & up (1950-52) ABC413 $17.99 (2 Gauge, EO = 3/8", L = 14-1/2",
Replaces: 8N17365 (32-1/2" long) 90 degree terminal ends)
NOTE: One keyed end for drive.
ts
ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH
ABC565 $14.95 Tachometer Cable Assembly w/ Metal ENDS, L = 16-1/4")
ar
Sheath fits: NAA, Jubilee, 501, 600, 700, ABC417 $17.99 (2 Gauge, EO = 3/8", L = 21") NOTE: May
800, 900, 1801 series, 2000, 4000 series have to drill eyelet hole bigger on some
4-cyl. (1953-64) gas, diesel applications.
rP
Replaces: B9NN17365B (30-1/2" long)
ABC419 $20.50 (2 Gauge, EO = 3/8", L = 27")
FDS1851 $27.95
Tachometer Cable Assembly w/ Nylon
Sheath fits: Dexta diesel, Super Dexta
to
FDS169 $59.95
Battery Cover w/ Access Door & Battery
Decal for cover (For 6-volt system)
Electrical outlet socket, parts fits: NAA, Jubilee, 600, 700, 800, 900 series
in
Replaces: C5NN10723H (8-1/2" wide, 19- FDS470 $149.99 (For 6-volt generator systems only)
.©
1/4" length) fits: 9N, 2N (1939-47) w/ single terminal
generator, Replaces: 2N14401, 9N14401B
nc
FDS472 $174.99 (For 6-volt generator systems only)
fits: 8N up to SN: 263843 w/ front
New Holland
Battery hold downs, parts
mounted distributor (1947-50)
Ford
Order # Price Description / Application
Replaces: 8N14401B NOTE: Generator is
,I
FDS372 $34.95 Battery Retainer fits: 9N, 2N (1939-47) mounted on the right side.
Replaces: 2N10721 (9-1/8" long x 7-1/16" FDS1703 $209.99 (For 6-volt generator systems only)
wide) NOTE: Improved version to fit 9N.
ts
fits: 8N SN: 263844 & up w/ side mounted
Electrical parts
To use on 9N must also purchase FDS371
distributor (1950-52), Replaces: 8N14401C
battery hold down pair (9N10728C &
NOTE: Generator is mounted on the left
ar
9N10748).
side.
FDS371 $38.95
FDS474 $187.99 (For 6-volt generator systems only)
Battery Hold Down, Pair fits: 9N (1939-42)
rP
fits: Jubilee, NAA, 600, 700, 800, 900 gas
Replaces: 9N10728C (RH), 9N10748 (LH) series (1953-57) w/out fuel gauge
NOTE: Sold as a RH / LH pair. Replaces: FDN14401B, FAF14401B NOTE:
If customer has a fuel gauge will need to
to
6-volt battery: 8N, Jubilee, NAA, 501, 600, 3000, 4000, 3-cyl. gas (1965-75) (3400, 3500,
700, 800, 900, 2000 4-cyl., 4000 4-cyl. series 4400, 4500 except light harness)
(1947-1964) gas, Replaces: NCA10718A
(9-3/16" long x 7-1/16" wide; Mounting
er
FDS421 $3.95 LH Battery Hold Down Bolt w/ Wing Nut harness kits for alternators -
fits: NAA, Jubilee both using FDS030 USA made
battery tray, 501, 600, 700, 800, 900, 2000 NOTE: Wiring harness kits have original
e
4-cyl., 4000 4-cyl. series gas (1953-64) style braiding and include headlight, wires
Replaces: NCA10728-A (3" o/a length)
St
.©
FDS3774 $225.50 (For 1 wire alternator) fits: Jubilee, NAA, distributor & 1-wire alternator
600, 620, 630, 640, 650, 660, 700, 740, 800, NOTE: Does not include light wires.
820, 840, 850, 860, 900, 950, 960 (1953-57) Alternator is mounted on the left side.
gas, LP
nc
ABC079 $49.99 (For 6-volt generator systems only)
New Holland
FDS3782 $255.99 (For 1 wire alternator) fits: 501, 601, 701, fits: NAA, Jubilee, 600, 700, 800, 900 series
801, 901, 1801, 2000 4-cyl., 4000 4-cyl. gas (1953-57), Replaces: FDN14401B
Ford
series (1957-64) gas, LP NOTE: Charge NOTE: Has flame retardant cloth
,I
indicator light will not be functional w/ covering. Light wires included.
this alternator harness. FDS376 $34.99 (For 6-volt generator systems only)
ts
fits: 501, 601, 701, 801, 901 series, 2000
Electrical parts
ar
harness kits - USA made not include ignition switch wires, light
NOTE: Light harness kits include original
wires or fuel sender wires.
style braiding w/ soldered terminals &
rP
instruction sheet.
Order # Price Application
FDS3617 $84.99 Fits: 9N, 2N, 8N, Jubilee, NAA, 600, 700, Wiring clips
800, 900 series (1939-57)
to
FDS3621 $86.99 Fits: 501, 601, 701, 801, 901 series, 2000 FDS271 $1.79
ac
4-cyl., 4000 4-cyl. (1957-64) EACH Wiring Clip fits: 9N, 2N, 8N (1939-52)
Replaces: FAC11653, 310991, 310993 Headlight wiring to hood (7 required)
FDS3625 $84.99 Fits: 2000 3-cyl., 3000, 4000 3-cyl. (1965-74) Replaces: 358297S
Tr
ABC545 $4.99 Wiring Clip fits: 2000 3-cyl. - 4140 (1965- Coils, Resistor, parts cont...
EACH 74); Serviceable for 8N - 4000 4-cyl. (1947- ABC011 $19.99 Distributor Coil (Metal Housing) &
64) Rear light wire to brake actuating (6-volt) Mounting Bracket fits: 8N SN: 263844 &
shaft (2 required), Replaces: 354475S2, ABC509 $19.99 up, NAA, Jubilee, 501, 600, 700, 800, 900,
380568S36 (12-volt) 1801, 2000, 4000 series; Fits other Ford
models w/ barrel-type coil (All w/ side
mounted distributor)
ABC011 Replaces: D3PF12029AA,
Fuse holder E8T12029BA
Fits: 8000 - 9600, Industrial (1968-76) ABC509 Replaces: D5TE12029AB
Replaces: C7NN14411A USA made NOTE: ABC509 is internally resisted.
.©
Description Order # Price See website for full applications.
Fuse Holder...........................................................ABC389.............$10.95 ABC4293 $49.99 NEW! 6-volt Flame Thrower Coil (40000
NOTE: Rated at 20 AMP; Fits in 1/2" hole. volts) fits: 8N, NAA, Jubilee, 501, 600,
nc
700, 800, 900, 1801, 2000, 4000 series;
New Holland
Fits other Ford models w/ barrel-type
coil (All w/ side mounted distributor)
Ford
Cigarette lighters Replaces: D3PF12029AA, E8T12029BA
,I
Order # Price Description / Application USA made NOTE: See website for full
applications.
ABC1862 $29.95 6-volt Cigarette Lighter w/ Socket
ts
fits: 8N, NAA (1947-54) w/out bracket & ABC348 $49.95 HOT" Coil (55000-volts) fits: Ford models
Electrical parts
w/ 6-volt system, Replaces: 8N9004601 w/ 12-volt system except front mount
NOTE: Anodized aluminum knob distributor tractors NOTE: Use w/or
ar
engraved w/ the word "LIGHTER". w/out electronic ignitions, Maximum
voltage for faster starting, reduced plug
IHS949 $29.95 12-volt Cigarette Lighter w/ Socket
fouling & longer plug life. Must use w/
rP
fits: 8N, NAA (1947-54) w/out bracket ABC366 resistor.
when converted to 12-volt
ABC3161 $4.95
NOTE: Anodized aluminum knob
engraved w/ the word "LIGHTER".
Coil Bracket fits: Same as ABC011,
to
IHS1784 $24.95 12-volt Cigarette Lighter w/ Socket ABC509, ABC4293, ABC348 USA made
fits: 2600 - TW35 (1976-90)
ac
Replaces: E3NN15760AA
NOTE: Black plastic knob w/ the word FDS3719 $7.75 Resistor Assembly fits: 9N, 2N, (8N up
''LIGHTER'' in white print. to SN: 263843) (1939-50) (All w/ front
Tr
6-volt Distributor Coil fits: 9N, 2N, (8N ABC366 $7.99 Universal 12-volt Voltage Resistor
up to SN: 263843) (1939-50) w/ front fits: Ford models NOTE: Used to step
mounted distributor, Replaces: 9N12024 down 12-volt battery. 2 terminal style.
e
FDS3835 $29.95 12-volt Distributor Coil fits: 9N, 2N, (8N 2.0 Ohms of resistance. Resistor gets
up to SN: 263843) (1939-50) (All w/ front very hot.
mounted distributor), Replaces: 9N12024 Dust Covers
NOTE: Other than the factory dash ABC277 $8.95
mount resistor, no extra (external) Dust Cover Assembly w/ Gasket
resistor is needed. This coil is internally fits: 8N SN: 263844 & up, NAA, Jubilee,
resisted. 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cyl. series gas (1950-64) (All w/
FDS1137 $4.65 Distributor Coil Retainer Wire fits: 9N,
side mount distributors), Replaces:
2N, (8N up to SN: 263843) (1939-50) w/
FAA12239A
front mount distributor
Replaces: 9N12137 Ignition parts continue on next page
.©
SN: 263843) (1939-50) w/ front mount
distributor, Replaces: 9N12106C FDS1144 $4.65
Distributor Breaker Plate Retaining Clip
fits: 9N, 2N, (8N up to SN: 263843)
nc
FDS1150 $3.95 Distributor Cap Spring Clip fits: 9N, 2N, (1939-50) w/ front mount distributor
New Holland
ABC064 $4.40
4-pc. Distributor Gasket Kit fits: 9N, 2N,
,I
NOTE: 2 used per tractor;
Sold individually. (8N up to SN: 263843) (1939-50) w/ front
mount distributor, Replaces: 9N12104
ABC063 $11.00 Distributor Cap fits: 8N SN: 263844 &
ts
USA made
up, NAA, Jubilee, 501, 600, 700, 800, 900,
Electrical parts
ar
original style side mounted distributor
Replaces: NCA12106A Rebuilt) fits: 8N SN: 263844 & up
(1950-52), Replaces: 8N12127B
FDS224 $8.00 Distributor Cap Clip / Clamp fits: 8N NOTE: Has external oiler & terminal for
rP
SN: 263844 & up, NAA, Jubilee, 501, coil wire. Original style.
600, 700, 800, 900, 1801, 2000, 4000 4-cyl.
series (1950-64), 6000 (1961-67) (All w/ FDS316 $248.50
side mounted distributor) , Replaces: Side Mount Distributor (NEW, not
to
4000, 4100, 4400, 4500, 4600, 4610 3-cyl. NOTE: 1/4" hex drive end.
gas (1965-82), Replaces: C5NF12106A, FDS3253 $29.95
E3NN12106A, 83937262 5-pc. Distributor Bushing & Shim Kit
in
87727246
distributors) fits: 8N SN: 263844 & up,
FDS471 $5.95 NAA, Jubilee, 501, 600, 700, 800, 900,
Rotor Button fits: 8N SN: 263844 & up,
1801, 2000, 4000 4-cyl. series (1950-64)
NAA - 4000 4-cyl. series (1950-64), 6000
Replaces: 8N12209 NOTE: Copper.
(1961-67) (All w/ side mount distributor)
Replaces: C0NN12200A, FAB12200A FDS3823 $6.20 Distributor Primary Screw & Insulator
Kit, Power Inlet fits: 8N SN: 263844 & up,
ABC159 $4.75 Rotor Clip fits: Late 8N SN: 263844 & up, Jubilee, NAA, 501, 600, 601, 700, 701, 800,
NAA, 501, 600, 700, 800, 900, 1801, 2000, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl.
4000 4-cyl. gas (1950-64), 6000 (1961-67) series (1950-64) NOTE: See website
(All w/ side mounted distributor) for all applications & replacement
Replaces: 8N12213 numbers.
Distributors, Caps, parts cont... Spark Plug Wiring Sets, parts cont...
FDS3329 $199.95 Distributor (New, not Rebuilt) fits: ABC2863 $19.99
2000, 2600, 2610, 3000, 3400, 3500, 3600, Spark Plug Wiring Set w/ Straight Boots
3610, 4000, 4100, 4400, 4500, 4600, 4610 fits: 6-cyl. models USA made
(All 3-cyl. gas) (1965-82), Replaces: NOTE: Cut to length.
F1NN12100AA NOTE: This is an
improved design using a mechanical FDS149 $12.50
advance. Tune-up parts interchange
w/ the original. See website for all Spark Plug Wiring Set w/ 90 degree
applications. Boots fits: 9N - 4000 4-cyl. (1939-64)
USA made NOTE: Cut to length.
.©
Spark Plug Wiring Sets, parts
NOTE: Copper core w/ aluminum coating to prevent corrosion,
water neoprene - unless otherwise noted. ABC326 $19.99
Spark Plug Wiring Set w/ 90 degree
nc
FDS467 $14.99 Spark Plug Wiring Set fits: 8N SN:
Boots fits: 6-cyl. models (35" long wires)
New Holland
263844 & up (1950-52) w/ side mounted
distributor (generator on left side) USA made NOTE: Cut to length.
Ford
USA made NOTE: Pre-Assembled - No
,I
cutting or fitting required. Spark Plugs (Autolite)
NOTE: Check spark plug specifications before ordering as some
FDS1756 $5.95 Spark Plug Wire Grommet fits: 8N SN:
ts
models may use more than one type.
263844 & up (1950-52) w/ side mounted
Electrical parts
distributor, Replaces: 7RA12297 (0.708" ABC172 $3.95
Fits: 9N, 2N, 8N (1939-50) w/ front
ar
I.D., 0.880" & 1.180" O.D., 0.970" length)
mount distributor
NOTE: Holds 4 plug wires together.
FDS331 $14.99 ABC172 specifications: 14 mm thread, 7/16" reach, 13/16" hex,
rP
Spark Plug Wiring Set fits: NAA, Jubilee,
Autolite 437, Plug Gap .025"
501, 600, 700, 800, 900 series, 1801, 2000,
4000 4-cyl. series (1953-64) USA made ABC322 $3.95 Fits: 8N w/ side mount distributor,
NOTE: Pre-Assembled - No cutting or NAA, Jubilee, 501, 600, 700, 800, 900,
fitting required.
to
O.D., 0.125" thick) USA made ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex,
NOTE: Sold individually. Holds #3 & Autolite 405, Plug Gap .025"
#4 plug wires together on 8N
Ignition Tune-Up Kits, parts
(1 used). Holds #1, #2 & #3, #4 plug
er
DHPN12259A USA made NOTE: points, condenser & rotor; Point Gap
Silicone Core. Waterproof neoprene. .015.
e
ABC509 etc., as coil wire boot will not Breaker Point Set fits: 9N, 2N, 8N up
fit original Ford coil. to SN: 263843 (All w/ front mounted
FDS2543 $49.95 Spark Plug Wire Set fits: 5000, 5100, 5190, distributor) (1939-50), Replaces: 9N12107,
5200, 5340, 6600; Industrial: 5500, 5550 A0NN12107A (Point Gap .015")
4-cyl. (1965-81), Replaces: D7NN12287A,
FDS3970 $3.50 NEW! Front Mount Distributor
DHPN12259A USA made NOTE:
Silicone core. Waterproof neoprene. Condenser fits: 9N, 2N, 8N up to
Pre-assembled, no cutting or fitting SN: 263843 (All w/ front mounted
required. Must use w/ aftermarket coil distributor) (1939-50), Replaces:
ABC509 etc., as coil wire boot will not A0NN12300A, 87741868GV
fit original Ford coil. Ignition parts continue on next page
FDS137 $34.95 Ignition Tune-Up Kit fits: 9N, 2N, (8N EIGN15 $179.99 Electronic Ignition Conversion Kit
up to SN: 263843) (1939-50) w/ front (For 12-v negative ground system)
mounted distributor NOTE: Kit includes fits: Same as EIGN16 NOTE: Must use
points, condenser, rotor, spark plugs, w/ FDS3835 coil & ABC4309 spark plug
ABC064 4-pc. distributor gasket kit. wires.
Spark Plug Gap .025 & Point Gap .015. EIGN04 $149.99 Electronic Ignition Conversion Kit
(For 6-v positive ground system)
FDS3984 $3.95 NEW! Autolite Ignition Points only
fits: 8N SN: 263844 & up w/ side mounted
fits: 8N SN: 263844 & up w/ side
distributor; Jubilee, Golden Jubilee, NAA,
mounted distributor, NAA, Jubilee, 501,
.©
600, 601, 700, 701, 800, 801, 900, 901, 2000
600, 700, 800, 900, 1801, 2000, 4000 series
4-cyl., 4000 4-cyl. (1950-64) NOTE: Must
(1950-64), 6000, Replaces: 87744965
use w/ ABC4293 high voltage coil &
NOTE: Point Gap 0.025".
ABC4309, or (FDS4315 NAA up) spark
nc
FDS476 $12.65 plug wires.
Ignition Tune-Up Kit fits: 8N SN: 263844
New Holland
& up, NAA, Jubilee, 501, 600, 700, EIGN03 $149.99 Electronic Ignition Conversion Kit
Ford
800, 900, 1801, 2000, 4000 series (1950- (For 12-v negative ground system)
,I
64), 6000 (1961-67) w/ side mounted fits: Same as EIGN04 NOTE: Must use
distributor NOTE: Kit includes points, w/ ABC348 high voltage coil, ABC366
condenser, rotor; Point Gap .025. resistor & ABC4309 or (FDS4315 - NAA
ts
Electrical parts
ar
& up, NAA, Jubilee, 501, 600, 700, 800, (For 12-v negative ground system)
900, 1801, 2000, 4000 series (1950-64) w/ fits: 2000, 2600, 2610, 3000, 3400, 3500,
side mounted distributor NOTE: Kit 3600, 3610, 4000, 4100, 4400, 4500, 4600,
rP
contains points, condenser, rotor, spark 4610 (All 3-cyl. gas) (1965-82) NOTE: Must
plugs. Spark Plug & Point Gap .025. use w/ ABC348 high voltage coil, ABC366
resistor & FDS2539 spark plug wires.
FDS420 $31.25 Ignition Tune-Up Kit fits: 2000, 2110,
to
1965-82); Industrials: 230A, 231, 334, 340, Electrical resistor assys., parts
340A, 420, 445, 515, 531, 535, 540, 540A, Order # Price Description / Application
545, 3400, 3500, 4400, 4500 w/ original FDS263 $18.95
Autolite distributor NOTE: Kit includes
Tr
points, condenser, rotor, spark plugs. Resistor Assembly fits: 9N, 2N (1939-47)
Spark Plug & Point Gap .025. Replaces: A8NN12250B
(5/16" machine screw mount O.E.M. style)
er
systems. No points to burn, pit or corrode. (3/16" machine screw mount O.E.M. style)
Fits entirely inside the distributor and
St
.©
(1947-52), Replaces: 8N10130A ABC1164 $33.50
(9/16" belt width) 12-volt Voltage Regulator (3-Terminal)
fits: NAA, Jubilee, 501, 600, 700, 800, 900,
nc
FDS434 $36.50
1801, 2000, 4000 4-cyl. series gas, diesel
New Holland
(1953-64), Replaces: C0NF10505A
Generator Pulley w/ Keyway (For 5/8"
Ford
belt only) fits: NAA, Jubilee, Golden
,I
FDS435 $29.95
12-volt Voltage Regulator (6 Spade
Jubilee (1953-54), Replaces: FAC10130B
Terminal) fits: 2000, 3000, 3400, 4000, 4400,
4500, 5000, 7000, 8000, 9000 (1965-74)
ts
FDS403 $114.25 Replaces: C7NN10505E, D0NN10505A,
Electrical parts
12-volt Generator (NEW not Rebuilt) w/
Tach Drive w/out Pulley fits: 2000, 3000, D0NN10505B
ar
3400, 4000, 4400, 4500, 5000, 8000, 9000
(1965-74), Replaces: C7NN10000C
rP
FDS3742 $19.95 Generator Pulley w/ Keyway Alternators, parts
fits: Same as FDS403 (1965-74), Replaces: NOTE: Alternators are NEW not rebuilt • To convert
C5NF10196B, 81812544 (1/2" belt width) 6-volt to 12-volt system. For negative ground systems.
NOTE: Fits tractors w/ original Lucas Order # Price Description / Application
to
generator.
ABC3551 $149.95 Mini 35 Amp Alternator w/ Pulley
FDS3752 $14.95 Tachometer Drive Assembly (For Lucas
fits: Ford models requiring a smaller dia.
Generators) fits: 2000, 3000, 3400, 4000,
ac
hole, 2" c.c. rivet holes) USA made RPM in order to self-excite. Includes
NOTE: Anodized aluminum. Customer instructions.
must stamp numbers.
ABC2315 $34.95
in
ABC072 $24.95
Alternator Pulley (For ABC3551)
Generator Cut-Out Assembly fits: 9N, 2N (0.587" I.D., 1.437" o/a length, 3" pulley
e
ABC1426 $19.95 FDS1103 $45.00 Alternator Bracket Kit fits: NAA, Jubilee,
Pulley only (For ABC418) 501, 600, 601, 700, 701, 800, 801, 900,
(.670" shaft dia., 3-3/16" pulley O.D., 901, 1801, 2000 4-cyl., 4000 4-cyl. series
1/2" belt width) (1953-64)
FDS1106 $174.95 Alternator Conversion Kit (For negative
ABC495 $20.55 ground systems) fits: 501, 600, 700, 800,
Pulley only (For ABC418) 900, 1801, 2000 4-cyl., 4000 4-cyl. series
(.670" shaft dia., 2-1/2" pulley O.D., gas (1954-64) NOTE: Kit includes
5/8" belt width) alternator, bracket kit, belt, internally
resisted 12-volt coil, USA made wiring
harness, instructions.
.©
See the following for custom bracket kits
FDS3466 $174.95 Alternator Conversion Kit (For negative
ground systems) fits: 2000 3-cyl., 3000,
nc
3400, 3500, 3550, 4000 3-cyl., 4400,
4500, 5000, 5500, 6500, 7000 series gas,
New Holland
,I
older 6-volt tractors to 12-volt charging system. Does not
include 12-v fuel gauge, 12-v sending unit, 60 amp ammeter &
brackets, adapter wire w/ terminal ends,
12-v light bulbs, but can be purchased separately.
hardware, instruction sheet. Replaces
the original Lucas generator. Works w/
ts
Order # Price Description / Application
Electrical parts
ar
ground systems) fits: 9N, 2N, (8N up
to SN: 263843) (1939-50) (All w/ front
mount distributors) NOTE: Kit includes Starters, parts
rP
alternator, USA made bracket kit, belt, Order # Price Description / Application
internally resisted 12-volt coil, USA
FDS297 $144.95
made wiring harness, instructions. Starter (NEW, not Rebuilt) w/ Drive
(Bendix) fits: 9N, 2N, 8N (1939-52)
FDS1089 $45.00
to
Alternator Bracket Kit fits: 9N, 2N, (8N Replaces: 8N11001 (starter), 52-11350C
up to SN: 263843) (1939-50) (All w/ front (drive)
mounted distributor) USA made
ac
ABC129 $28.95
Ratchet Style Starter Drive (Bendix)
FDS1084B $4.95 Assembly fits: 9N, 2N, 8N (1939-52)
Replaces: 52-11350C
Tr
kit, internally resisted 12-volt coil, USA FDS324 $165.95 Starter (NEW, not Rebuilt) w/ Drive
made wiring harness, instructions. (Bendix) fits: NAA, Jubilee, 501, 600,
Must use existing fan belt. 700, 800, 900, 1801, 1811, 2000, 4000
e
FDS390 $174.95 12-volt Starter (New, not Rebuilt) Starter Solenoid Relay Assemblies, parts cont...
w/ Solenoid & Starter Drive Fits the ABC139 $14.95 12-volt Starter Solenoid Relay Assembly
following diesels: 231, 335, 340, 445, 531, (4 Post) Flat Mount fits the following
540, 550, 555, 2000 3-cyl., 2310, 2600, gas, LP: 2000 3-cyl., 2600, 2610, 3000,
2610, 2810, 2910, 3000, 3400, 3500, 3600,
3400, 3500, 3600, 3610, 4000 3-cyl., 4400,
3610, 3910, 4000 3-cyl., 4600, 4610, 5000,
4500, 4600, 4610, (5000 w/ 8 speed), 6600;
5600, 5610, 6600, 6610, 7000, 7600, 7610,
1965-6/1982 Industrials w/ 4-1/2" dia.
7710, 8000, 8600, 9000 (1965-92)
starter, Replaces: D2AF11450AA, 76919
Replaces: D4NN11000BR,
NOTE: Do not use the "I" terminal if
D8NN11000CE (5" O.D. housing)
replacing a 3-terminal switch.
ABC517 $14.45 Starter Tag w/ (2) Rivets fits: Tractors &
.©
ABC508 $5.35 Starter or Solenoid Terminal Repair
Industrial using Autolite starters
(2.955" length, .915" wide, .140" dia. rivet Stud (For tractors using 5/16" x 18 NC
holes, 2.650" c.c. rivet holes) USA made starter terminals) NOTE: Brass.
nc
NOTE: Anodized aluminum. Customer ABC506 $5.30 Starter or Solenoid Terminal Repair
New Holland
must stamp numbers. Stud (For tractors using 5/16" x 24 NF
starter terminals) NOTE: Brass.
Ford
Glow Plugs
,I
ABC4218 $11.99 NEW! Diesel Intake Manifold Heater Covers
/ Thermostart, Glow Plug fits: 2000 FDS340 $7.89 Rubber Cover (For starter control wire
- 7000, 2310 - 7710, 2600 - 7700, 3330 - terminal - goes on wire to solenoid)
ts
Electrical parts
8630, 4340 - 8340, TS90 - TS115, TM115 - fits: 8N, NAA, Jubilee, 501, 600, 700,
TM190, TW5, TW35; IND: 230A - 655A, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
ar
345C - 655C, 345D - 675E, 3400, 3550 - series (1947-64), Replaces: 8N11115
5550 (1965-99), Replaces: C5NE9A436A
FDS341 $4.95 Rubber Cover (For starter push switch)
ABC4232 $14.99 NEW! Diesel Intake Manifold Heater fits: 8N, NAA, Jubilee, 501, 600, 700,
rP
/ Thermostart, Glow Plug fits: 3010S, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
3830, 4010S, 4030 3-cyl., 4230, 4430, series (1947-64), Replaces: 8N11113
4835, 5010S, 5530, 5635, 6530, 6635, 7530,
FDS342 $11.95 Rubber Cover (For battery cable to
7635, TD55D - TD4040F, TN55 - TN95
to
(1992 - 2009), Replaces: 5161845 (Eyelet starter solenoid) fits: 8N, NAA, Jubilee
terminal, 7/8" UNF mounting thread, (1947-54), Replaces: 86H14321A,
3/8" UNF fuel line thread) C7NN14321A
ac
ABC3919 $12.99 6-volt Starter Solenoid (4 Post) Flat up, 2N (1940-47), Replaces: 9N11450B
Mount fits: 501, 601, 701, 801, 901, 2000 (2-3/4" c.c. bolt holes)
4-cyl., 4000 4-cyl. gas series (1957-64) NOTE: Restoration quality.
Replaces: 311007, 311007FR, ABC067 $24.95 Starter Push Switch w/ Mounting
311007FRGV
Gasket fits: 8N, NAA, Jubilee, 501,
FDS282 $19.99 12-volt Starter Solenoid Relay Assembly 600, 700, 800, 900, 1801, 2000, 4000
(4 Post) Flat Mount fits: 501, 601, 701, 4-cyl. series (1947-64) (All w/ standard
801, 901, 1801, 2000, 4000 4-cyl. series transmission), Replaces: 8N11500
(1957-64) except Lucas equipped, 6000 NOTE: Does not fit Select-O-Speeds.
gas; Activates manifold heater on 6000 Will work on 6-volt or 12-volt systems.
diesel, Replaces: 311006 Starters, parts continue on next page
.©
ABC398 $8.20 MFS119 $14.95 Work Light Toggle Switch (For tail light)
Switch fits: Ag & Light Industrial fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
equipment w/ battery ignition 700, 800, 900, 1801, 2000, 4000 4-cyl. series
(10-24 UNC knob thread) NOTE: 30
nc
(1939-64), Replaces: 21C13740, 8N1374
AMP, 3/8" dia. thread, two screw type NOTE: Two spade terminals.
New Holland
,I
Ignition / Key Switches 1801, 2000, 4000 4-cyl. series (All w/
SN: 10615 & up) (1955-64), Replaces:
ABC065 $12.99 Ignition / Key Switch w/ (2) Keys &
FDN11654A NOTE: Two screw type
Mounting Nut fits: Ford models (1939-
ts
terminals. Like original.
Electrical parts
ar
switch. May have to drill hole to 0.800" Switch fits: Ag & Light Industrial
on some applications. equipment (10-24 UNC knob thread)
IHS760 $19.95 Ignition / Key Switch w/ (2) Keys & NOTE: 30 AMP, 3/8" dia. thread, two
rP
Mounting Nut fits: Ford models (1939- screw type terminals, non-fused.
64) except Dexta & Fordson Major JDS631 $12.95 Universal 3-Position Fused Push /
Replaces: 8N3679C USA made Pull Starter & Light Switch fits: Ag &
NOTE: 2 spade terminal switch. May
to
ABC400 $15.49
Ignition / Key Switch w/ (2) Keys
& Mounting Nut fits: Ag & Light
Tr
ABC3696 $51.75 12-volt Negative Ground LED Lamp ABC527 $4.95 Concaved Mounting Washer
fits: Same as FDS177, FDS213 fits: 2600 - TW35 (1975-90)
(5.730" dia.) NOTE: Direct replacement Replaces: 82858740
for 4419 sealed beam or halogen lamp. (2-1/4" O.D., 9/16" center hole)
Flood beam pattern. Polarity sensitive, ABC3441 $64.65 12-volt LED Trapezoid Headlight
Rear view negative ground only. Assembly w/ Cree LED chips fits:
FDS099 $17.95 2600 - TW35 (1975-90) (6 LED bulbs,
(LH) 1/2" rear stud mount, 4-1/2" dia. bulb)
NOTE: Will update your tractor to LED
Headlight Wing fits: 9N, 2N, Early 8N technology.
(1939-49)
.©
ABC3500 $64.65 12-volt LED Flood Light Assembly w/
FDS098 $17.95 FDS099 Replaces: 9N13473
Cree LED chips fits: 2600 - TW35 (1975-
(RH) FDS098 Replaces: 9N13472
90) (6 LED bulbs, 1/2" rear stud mount,
nc
4-1/2" dia. bulb) NOTE: Will update
New Holland
your tractor to LED technology.
ABC353 $9.50
Ford
ABC480 $8.95
Inner Reinforcement Plate
,I
(Lo Beam) 12-volt Sealed Beam Lamp fits: 2600 -
(For Headlight Wing) fits: 9N, 2N, Early
ABC460 $16.50 TW35 (1975-90)
8N (1939-49), Replaces: 9N13102
(Hi Beam) ABC353 Replaces: 4411, 312555,
USA made NOTE: Clear zinc-plated.
ts
87779219
Electrical parts
FDS272 $6.50 Headlight Bracket (Round) fits: Late 8N, ABC460 Replaces: 4410
NAA, Jubilee, 501, 600, 700, 800, 900, (4.365" O.D.) NOTE: Check bulb
ar
1801, 2000, 2600, 3000, 3600, 4000, 4600, number before ordering.
5000, 5600, 7000, 7600, 7700 series (1950- Rear view
ABC3474 $48.50
rP
80); Will also fit 9N, 2N, Early 8N, but
not correct, Replaces: 8N13472 (Trapezoid
NOTE: LH & RH are the same; pattern)
12-volt Cree LED Lamp fits: 2600 -
Sold individually. ABC3490 $48.50
TW35 (1975-90)
to
(Flood
FDS494 $5.95
pattern) ABC3474 Replaces: 4411
Headlight Reinforcement Washer
ABC3490 Replaces: 4410
fits: Late 8N - 7700 (1950-80)
ac
(4-1/2" O.D.)
Replaces: FAA13102A
(2-1/4" O.D., 1/2" center hole)
Rear view
Tr
FDS256 $16.95 Light Ring fits: Some 9N, 2N, 8N, NAA,
ABC3447 $9.95 Light Bezel fits: 2600 - 7600, 2310 - 7710,
Jubilee, 501, 600, 700, 800, 900, 1801,
8000 - 9700, Industrials (1968-85) (All
2000, 4000 4-cyl. series (1939-64)
w/ Ford fender or cab mounted lights)
Replaces: C0NN13045A (5-3/4" O.D., Replaces: 83936004 (4.750" O.D., 4.100"
er
3/4" wide) NOTE: Check width I.D., 1.940" wide, 4 inner tabs, 1 outer
measurement before ordering. Will fit locating tab) NOTE: Rubber. See
FDS177 & FDS213. website for all applications.
in
FDS460 $14.50 Light Ring fits: Some NAA, Jubilee, 501, ABC3028 $12.50 Light Bezel (For 'Hobbs' style light w/
600, 700, 800, 900, 1801, 2000, 2310, 2600, out glare guard) fits: 2600 - TW35 (1975-
e
2610, 2810, 2910, 3000, 3600, 3610, 4000, 90) (5.250" O.D., 3.675" I.D., 1.125" wide,
4100, 4110, 4600, 4610, 5600, 5700, 6600, 3 outer tabs & 4 inner tabs)
St
6700, 7600, 7700 (1953-80) NOTE: Rubber. Fits IHS647, but will
Replaces: C0NN13045B (5-3/4" O.D. not fit factory Ford light.
x 1" wide) NOTE: Check width ABC3035 $21.95 Light Bezel (For 'Hobbs' Late style w/
measurement before ordering. glare guard) fits: Tractors w/ 'Hobbs'
IHS647 $29.95 round lights & 5.250" O.D. bezel when
12-volt Sealed Beam Headlight extended glare guard bezel is desired
Assembly (For Flat Top Fenders) (5.250" O.D., 3.675" I.D., 2.430" wide,
fits: 2600 - TW35 (1975-90) (4-1/2") 3 outer tabs & 4 inner tabs) NOTE:
NOTE: Post is out of back w/ wires Rubber. Fits IHS647, but will not fit
through post. factory Ford light.
Headlights, parts continue on next page
ABC3514 $39.50 12-volt LED Flood Light Assembly FDS173 $46.50 12-volt Tail Light Assembly (License
w/ Bridgelux LED chips fits: 12-volt Lamp Window) Serviceable for 9N, 2N,
applications (1 bolt bottom mount for 8N, NAA, Jubilee, 600, 800 (1939-57)
0.335" mounting hole) NOTE: 60 degree Replaces: 13403, 13448, 13450, 13560,
flood beam pattern. See website for all 31788-S NOTE: For 6-v bulb order
specifications. ABC1439. Economy style. See light chart
F for subcomponents.
ABC4116 $69.99 NEW! LED Front/Rear Cab or Fender
FDS444 $65.05
Light fits Ford/New Holland: 8670 - 6-volt Duolamp Tail Light Assembly
8970A, TG210 - TG305, TJ275 - TJ530, (License Lamp Window) fits: 9N, 2N, 8N
T9020 - T9060 (9/93 - 07) (1939-52), Replaces: 8N13404 USA made
.©
Replaces: 178345A1, 92269C1 (60 degree NOTE: Powder coat 8N grey. Restoration
flood pattern) NOTE: See website for quality. For 12-v bulb order ABC345. See
all applications/specifications. light chart F for subcomponents.
nc
ABC4130 $79.95 NEW! LED Front/Rear Cab Light
FDS446 $42.95
New Holland
fits Ford/New Holland: 8670 - 8970A, 6-volt Duolamp Tail Light Assembly
TM115 - TM190, TS90 - TS115 (9/93 (License Lamp Window) fits: NAA,
Ford
,I
Jubilee (1953-54), Replaces: FAA13402A
9846126; Will work for 82014950, USA made NOTE: Powder coat.
82014951 NOTE: See website for all Restoration quality. For 12-v bulb
ts
applications. Can also be used on order ABC345. See light chart G for
Electrical parts
ar
FDS448 $64.99
ABC359 $12.00
12-volt Bulb (Double contact) w/ Ring 6-volt Duolamp Tail Light Assembly
fits: 1000, 1300, 1500, 1600, 1700, 1900 fits: 600, 700, 800, 900 series (1954-57)
rP
(1973-83), Replaces: SBA385120010 Replaces: NCA13402A NOTE: Powder
coat. Restoration quality. For 12-v bulb
order ABC345. See light chart G for
subcomponents.
to
12-volt Bulb only (For 1-1/8" dia. hole)................ ABC356........$0.85 ABC548 $9.95 12-volt Round Tail Light Assembly w/
licensed lamp window, red lens & black
ABS base Serviceable for Ford models
e
c.c. studs)
Need light components? See page 192
ABC544 $17.15 12-volt Fender & Cab Warning Light w/
Order # Price Description / Application 2 amber lenses, double contact bulb &
FDS172 $46.50 black die cast base Serviceable for 2000
12-volt Tail Light Assembly (Solid 3-cyl. - TW35 (1965-90) (All using round
Bucket) Serviceable for 9N, 2N, 8N, NAA, warning light), Replaces: C5NN12N359E,
Jubilee, 600, 800 (1939-57), Replaces: D4NN13N359A, D6NN13N359B,
13402, 13466, 13448, 13450, 13560, 30178- D9NN13N359AA (4" dia. w/ 1/2-20"
S, 9N13404 NOTE: For 6-v bulb order mounting stud)
ABC1439. Economy style. See light chart
ABC1439 $3.45 6-volt Bulb, Double contact (For ABC544,
F for subcomponents.
ABC548)
.©
NOTE: 25 LEDs. Amber lens on one FDS1109 Replaces: 8N15514
side & amber / red lens on the other FDS1101 Replaces: FDF-15514
side. (4-1/2" dia.) USA made
Amber view
nc
ABC4154 $44.99 NEW! 12-24-volt LED Fender & Cab
New Holland
FDS325 $89.95
Warning Light w/ amber & amber
(6-volt)
Ford
lenses fits: Tractors & equipment w/ Work Light Assembly w/ Sealed Beam
,I
12-24 volt systems (4" dia. w/ 1/2-20" FDS327 $89.95
Lens & On / Off Switch fits: 8N, NAA,
(12-volt)
mounting stud) NOTE: See website for Jubilee, 501, 600, 700, 800, 900, 1801, 2000
dimensions & detailed information. 4-cyl., 4000 4-cyl. series (1947-64)
ts
Electrical parts
Replaces: 8N15500 (5-1/4" O.D. housing)
ABC3899 $10.95 12-volt LED Flasher Unit fits: Tractors,
NOTE: Uses 4-1/2" O.D. sealed beam
Combines, Industrials using LED
ar
warning lights (.230" dia. single bulb. Restoration quality.
bolt mount, 1 to 150 watt, compact
1.090" across x 1.630" tall w/ 2 spade
rP
ABC352 $9.50
connections) NOTE: One flasher can (6-volt)
flash (4) lights simultaneously or order Sealed Beam Bulb fits: Same as FDS325,
ABC353 $9.50
(1) flasher per light for separate flashes. FDS327
(12-volt)
Use w/ ABC3538 LED light.
to
(4-1/2" dia.)
8N, NAA, Jubilee (1939-54)
Replaces: 9N13470, 9N13471
e
ABC1243 $4.95 NEW! Amber Lens only (For ABC4098) NOTE: Ford grey. Sold as pair.
FDS320 $129.95
St
Light chart F
FDS454 FDS458
The light subcomponents below fit FDS172, FDS173, FDS444:
FDS454 $14.95 Glass Tail Light Lens USA made
FDS458GK FDS454GK $9.95 Tail Light Lens Gasket Set USA made
FDS456 $14.95 Stainless Steel Light Ring (Bezel)
FDS454GK
FDS458 $13.25 Tail Light License Light Window Glass Lens USA made
.©
ABC1439 FDS458GK $4.95 Gasket only (For FDS458) USA made
ABC1439 $3.45 6-volt Bulb, Double contact (For FDS172, FDS173)
nc
FDS456
ABC344 ABC344 $1.80 6-volt Bulb, Single contact (For FDS444 & factory lights)
New Holland
ABC345
ABC345 $1.95 12-volt Bulb, Single contact (For FDS444 & factory lights)
Ford
Light chart G
,I
The light components below fit FDS446, FDS448, FDS442:
ABC344
FDS452 ABC345 FDS452 $14.95 Plastic Tail Light Lens
ts
ABC344 $1.80 6-volt Bulb, Single contact
Electrical / Chassis parts
2-pc. Hood Emblem fits: 9N, 2N (1939-47) 660 (1954-57) (Measures 5-3/4" across)
Replaces: 9N16600 NOTE: Die cast, chrome plated w/ a
(Oval emblem = 3-1/4" W x 1-7/8" H baked-on painted finish in original
ac
FDS009 $17.95
Hood Emblem (Economy) fits: 8N (1954-57) (Measures 5-3/4" across)
(1947-52), Replaces: 8N16600B NOTE: Die cast, chrome plated w/ a
(4-5/8" W x 2" H) baked-on painted finish in original
NOTE: Economy. Painted, pot metal. colors.
er
FDS011 $48.50
Hood Emblem fits: Jubilee, Golden Jubilee FDS235 $74.95
St
.©
1821, 1841, 1871, 1881, 4040, 4140 4-cyl.
Industrial (1958-64), Replaces: 312740
(6" o/a length, 1-1/4" wide)
Front grilles, parts
nc
Order # Price Description / Application
New Holland
FDS344 $59.95 Hood Ornament fits: 4000, 4030, 4031,
FDS006 $67.50
4040, 4110, 4120, 4121, 4130, 4131, 4140
Ford
Front Grille fits: 9N, 2N, 8N (1941-52)
,I
(4-cyl.) (1962-64); Serviceable for 2000 4-
cyl., Replaces: C3NN16B748A Replaces: 8N8204 NOTE: Economy,
NOTE: Metal; chrome plated. not like original. For best results fit to
ts
tractor before painting.
FDS409 $35.95
Chassis parts
Hood Emblem fits: Fordson Major
ar
(11/1952-12/64); Dexta up to SN: 916550 FDS205 $350.00
(1957-6/63) when using oval emblem Front Grille fits: Late 9N, 2N (Late 1941-
Replaces: E1ADKN8212C 47), Replaces: 9N8206D USA made
rP
NOTE: Metal. NOTE: Restoration quality. Made from
original tooling. Tear drop shaped bars.
FDS1894 $66.95
Front Grille Emblem fits: 6000 (1961-67); FDS204 $350.00
Front Grille fits: 8N (1947-52)
to
C5NN3A515A (10 x 32 thread, 2.475" tall, finish, correct 8N Ford gray paint. Tear
3.675" length of widest point) USA made drop shaped bars.
FDS198 $100.95
Tr
ABC374 $0.29
Emblem Push Clip (For Ford emblems) Front Grille Fits: 8N (1947-52);
(0.180" center hole dia. will expand to Serviceable for 9N, 2N (1939-47)
0.300") NOTE: Push clips are included w/ NOTE: Original style. Bare steel. Round
the listed emblems. Sold individually. bars.
er
FDS1090 $194.99
in
FDS347 $6.99 Grille Mounting Stud fits: 600, 700, 800, FDS059 $59.95 1-pc. Front Grille Screen Assembly w/
900 (1954-62), Replaces: NAA88219B Plastic Outer Frame & Steel Screen
(5/16" - 18) NOTE: 2 used per tractor; fits: 2600, 3600, 4100, 4600, 4600SU, 5600,
Sold individually. 6600, 7600 (1975-81); Will also fit 2000,
3000, 4000 if using 1-piece style grille
FDS356 $299.50 Upper Grille Assembly fits: 801, 811, 821, housing, Replaces: D5NN8200A
841, 851, 861, 871, 881, 901, 941, 951, 961, (18-3/8" top width, 17-1/2" bottom
971, 981, 4030, 4031 (1958-62) width, 23-3/4" tall)
Replaces: 310984 (outer shell), 310982
FDS311 $3.75
(inner screen), 311591 (grille mounting Front Grille Screen Fastening Spring
EACH
stud) Secures bug screen to Ford grilles
.©
NOTE: 4 used; Sold individually.
nc
New Holland
,I
NOTE: Restoration quality. For best results fit to tractor before
Order # Price Description
painting.
FDS352 $149.95 Outer Grille Shell only fits: Same as
Order # Price Description / Application
FDS356, Replaces: 310984
ts
FDS127 $109.95
Chassis parts
ar
Jubilee, 600, 700, 800, 900 (1953-57)
FDS348 $8.25 Grille Mounting Stud fits: Same as Replaces: NCA16613A
FDS356, Replaces: 311591, D4NN8N213A
(5/16" - 18 UNC) NOTE: 4 used per
rP
grille; Sold individually. FDS4018 $109.95
FDS190 $176.50 Bottom Grille Section fits: Same as NEW! Front Hood Emblem Housing
FDS356, Replaces: 310032 USA made fits: 501, 601, 701, 801, 901 series (1957-62)
to
FDS4026 $124.50
2-pc. Front Grille (Upper & Lower) NEW! Front Hood Top Panel fits: 2000
fits: 2000, 3000, 4000, 5000 (1965-3/68) 4-cyl., 2030, 2031, 2111, 2121, 2130, 2131,
Replaces: C5NN8A163A, C5NN8202AA 4000 4-cyl., 4030 4-cyl., 4031, 4120, 4121,
Tr
used April 1968 through January 1971 Order # Price Description / Application
& the plastic grille used February 1971
FDS069 $339.99 Hood w/ Battery Door & Hinge, Latch
& up.
e
.©
Battery Door Hinge fits: 9N w/ steel fits: NAA - 4000 4-cyl. (1953-64)
hood, 2N, 8N (1939-52) Replaces: NAA88131B
Replaces: 9N16689 USA made (2.026" o/a length, 1.035" thick, 1.285"
nc
wide) USA made NOTE: 2 used per
New Holland
FDS008 $15.95 tractor; Sold individually. Must be
Chrome Battery Door Handle w/ Stud, glued to panels.
Ford
,I
Nut & Latch fits: 9N, 2N, 8N (1939-52) FDS075 $22.99 Air Cleaner Grille Door w/ Screen &
Replaces: 9N16625 Thumb Screw fits: NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. series
ts
FDS007 $9.50 Air Cleaner Grille Door w/ Thumb (1953-64), Replaces: NAA9661B (door),
Chassis parts
Screw fits: 8N (1947-52) NAA9669A (screen)
Replaces: 8N9661 NOTE: Fits outside
ar
FDS075S $4.95
right rear hood. Will also fit Ford 9N, 2N
if they are converted to an 8N hood. Screen only (For FDS075)
rP
FDS085 $14.95
Air Cleaner Funnel Assembly fits: 8N FDS377 $2.75 Center Door Rubber Bumper fits: NAA,
(1947-52), Replaces: 8N9684
Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl.,
to
(RH)
FDS084 $79.95 FDS440 $14.95 Hood Latch Spring fits: NAA, Jubilee,
Side Panel (Dog Leg)
(LH) 501, 600, 700, 800, 900, 2000 4-cyl., 4000
fits: 2N, 8N (1942-52)
4-cyl. series (1953-64) except LP
Tr
FDS083 FDS084
FDS3817 $54.99 Center Panel Hood Latch Assembly
er
Replaces: 20311S7 (bolt), 34806S (lock), NAA16645C NOTE: 2 used per tractor;
33798S (nut) NOTE: Includes 4 fine Sold individually.
thread bolts, nuts, lock washers. FDS3821 $9.50 Center Hood Door Latch only fits:
e
ABC2257 $5.99 Hood Side Panel (Hood Dog Leg) to Axle Jubilee, NAA, 501, 600, 601, 700, 701,
St
Support Bolt Kit fits: 9N, 2N, 8N (1939- 800, 801, 900, 901, 1801, 2000 4-cyl., 4000
52) (All using single bolt dog legs) 4-cyl. gas, diesel (1953-64), Replaces:
Replaces: 350782S8 (7/16" - 20 NF bolts) NAA16628C NOTE: 2 used per tractor;
NOTE: Includes 2 bolts, flat & lock Sold individually.
washers, square nuts. FDS3824 $24.95 Front & Rear Hood Door Hinge fits:
FDS385 $7.20 6-pc. Hood Dash Screw Kit fits: NAA, Jubilee, NAA, 600, 700, 800, 900 gas,
Jubilee, Golden Jubilee, 501, 600, 700, 800, diesel (1953-57); Also fits as a rear door
900, 2000 4-cyl., 4000 4-cyl. (1953-64) hinge for 501, 601, 701, 801, 901, 1801,
Replaces: 354425S (5/16" x 24 Phillips 2000 4-cyl., 4000 4-cyl. series gas, diesel
head) USA made NOTE: Secures rear of (1957-64), Replaces: NAA16689C
hood to dash panel using (6) screws. Hood, parts continue on next page
FDS491 $1.05 Hood / Grille Rubber Bumper fits: 4000- FDS191 $6.70
Air Cleaner Gasket fits: 2N, 8N, NAA,
TW35 (1965-90); Serviceable for 2000,
Jubilee, 600, 700, 800, 900 (1942-57)
3000, Replaces: C5NN16N655A
Replaces: 9N9623B USA made
(.990" o/a length, .500" head dia.)
NOTE: 1 to 20 used per tractor;
.©
Clamp-Held Oil Cups, parts
Sold individually.
FDS034 $14.95 Air Cleaner Oil Cup (Clamp-Style)
fits: Some 9N, 2N, 501, 600, 601, 700, 701
nc
(1939-64), 800, 900 gas (1954-57)
New Holland
,I
Air Cleaner Assys., parts
FDS033 $9.95
FDS184 $108.85
Air Cleaner Inner Oil Cup (For FDS034)
ts
Air Cleaner Assembly w/ Clip Replaces: 311506
Chassis parts
ar
FDS081 $11.50
(5-5/8" c.c. bolt pattern)
Air Cleaner Cup Clamp (For FDS034)
rP
Replaces: 311508
FDS382 $7.20 4-pc. Bolt Kit fits: 8N (1947-52)
Replaces: 355494S (3/8" x 24)
USA made NOTE: Bolts air cleaner to JDS540 $27.50
battery tray (only 2 bolts are required). Air Cleaner Oil Cup fits: 801 - 881, 901 -
to
(7-1/4" c.c. bolt pattern, 15-1/2" tall) 881, 901 - 981, 4000 4-cyl. (1957-64) w/
172 C.I. gas, Replaces: 311511
FDS280 $138.95
Air Cleaner Assembly w/ Clip Tubes, hoses, clamp
Assembly, Gasket & Clip-Held Cup
er
FDS019 $18.95
fits: 700, 740, 800, 820, 840, 850, 860,
900, 940, 950, 960 (1954-57), Replaces: Air Cleaner Tube fits: 9N, 2N, 8N (1939-
C7NN9600J, 312918 (6-7/8" c.c. bolt 52), Replaces: 9N18215C
in
ABC422 $13.35
Air Cleaner Oil Bath Filter Element
FDS309 $29.95
(3" wide x 78" long) NOTE: Replaces the Air Cleaner Tube fits: NAA, NAB,
St
mesh in existing air cleaners. Sold by Jubilee, 501, 541, 600, 601, 611, 620, 621,
the bag. Normal utility air cleaners will 630, 631, 640, 641, 650, 651, 661, 671, 681
use 2 bags. gas, LP (1953-62), Replaces: EAE9620B
(1-5/8" O.D.)
Clip-Held Oil Cup, parts
FDS185 $24.75 Air Cleaner Oil Cup (Clip-Held) FDS1481 $34.50
fits: Some 8N, NAA, Jubilee, 600, 700, Air Cleaner Tube fits: 700, 740, 800, 820,
800, 900 (1947-57), Replaces: 8N9658 840, 850, 860, 900, 950, 960 gas (1954-57)
(5" O.D. at lip, 3-1/8" high) Replaces: EAF9621B, 311112
NOTE: Check measurement before (1-5/8" O.D. pipe)
ordering.
FDS1540 $32.50 Air Cleaner Tube fits following w/ 172 ABC4180 $13.31 (1" - 3" range, 1/2" band width)
C.I. gas, LP: 801, 811, 821, 841, 851, 861, ABC4169 $10.82 (1-1/4" - 2-1/4" range, 1/2" band width)
871, 881, 901, 941, 951, 961, 971, 981, 1801 ABC4172 $11.39 (1-1/2" - 2-1/2" range, 1/2" band width)
- 1881, (4000 4-cyl.), 4030, 4040, 4121,
4130, 4131, 4140 (1957-64)
ABC4176 $11.67 (1-3/4" - 2-3/4" range, 1/2" band width)
Replaces: 311092, 86531351 (2" O.D.) ABC4184 $13.55 (2-1/4" - 3-1/4" range, 1/2" band width)
FDS260 $4.00 Air Cleaner Hose fits: 9N, 2N, 8N, NAA, ABC4188 $14.46 (2-1/2" - 3-1/2" range, 1/2" band width)
EACH Jubilee, 501, 541, 600, 601-681, 700 - 771 ABC4204 $16.51 (2-1/2" - 4-1/2" range, 1/2" band width)
(1939-62), 800, 900 series gas (1954-57) ABC4192 $15.24 (2-3/4" - 3-3/4" range, 1/2" band width)
.©
Replaces: 9N9652 (1-1/2" I.D., 2-7/16"
ABC4196 $15.65 (3" - 4" range, 1/2" band width)
long) NOTE: 2 required per tractor;
Sold individually. ABC4200 $15.99 (3-1/4" - 4-1/4" range, 1/2" band width)
nc
FDS261 $5.10 Air Cleaner Hose fits: 801, 901 (1957-64); ABC4206 $99.99 (130-pc. assortment; Display rack:
New Holland
EACH 1801, 2000, 2600, 2610, 3000, 3600, 3610, 5/16" - 2-3/4" range) NOTE: Includes
4000, 4600, 4610 (1962-82); Industrial 20 each: ABC4133, ABC4142, ABC4155,
Ford
,I
340A - 555B series gas, Replaces: 311107 ABC4161, ABC4169, ABC4176 & 10 each:
(2" I.D., 2-1/4" long) NOTE: 2 required ABC4151.
per tractor; Sold individually.
ts
FDS258 $3.75 Clamp (Air cleaner to carb pipe)
Chassis parts
EACH (For 1-3/4" to 2" O.D. hose) fits: 9N, 2N, Pre-cleaner caps, parts
ar
8N, NAA, Jubilee, 501, 600, 700, some
Order # Price Description / Application
800, 900 series (1939-57)
Replaces: 9N9653 NOTE: 4 required per IHS390 $34.50
rP
tractor; Sold individually. Air Cleaner Cap fits: 9N, 2N (1939-47)
w/ vertical air intake through hood
Miscellaneous
(4-1/4" body dia.; 1-3/4" I.D.)
ABC2443 $17.50 Dust Unloader Valve (Vacuator Valve) NOTE: Fits outside of pipe.
(For Dry Air Cleaners) fits: 2000, 3000,
to
(For Dry Air Cleaners) fits: 2310 - application: Some 2000, 3000, 4000 series,
TW20 (1972-90), Industrials using 3" 231, 233 w/ 2" Intake (1965-78); Dexta,
unloader valve, Replaces: D2NN9C673B, Super Dexta (1957-64)
F0NN9C673AA, 81870839 Replaces: C5NN9A660B
er
NEW! Worm drive hose FDS362 $19.95 Pre-Cleaner Cap fits: Some 4000, 4400,
clamps - USA made 4500, 4600, 5000, 5100, 5200, 7000, 7100,
e
.©
measurements before ordering. Clear FDS178 $199.99 Fuel Tank fits: NAA, Jubilee, 600, 601,
plastic. 700, 701, 800, 801, 900, 901, 2000 4-cyl.,
4000 4-cyl. series gas (1953-64), Replaces:
nc
ABC484 dimensions: Bowl O.D. at top = 5-1/2"; Bowl O.D. at
NAA9002E, NCB9002A NOTE: Steel.
New Holland
,I
ABC383 $82.95
may be smaller capacity than original.
Pre-Cleaner Cap Assembly fits: Ford
If fuel sender is needed please order
models (All w/ 2-1/4" I.D. base & 7"
FDS200.
ts
bowl), Replaces: 86620243 USA made
Chassis parts
ar
ABC512 $74.95 Includes all of the products necessary to
Pre-Cleaner Cap Assembly fits: Ford successfully clean, prep and line your
models (All w/ 2-1/2" I.D. base & 7" tank. Once lined, pinhole leaks will be
rP
bowl) USA made sealed & future rust will be prevented.
Fuel tank liner kit ships in own box. 1
ABC470 $39.95 kit per box. Can not be sold in the state
of CA. For CA residents we can special
to
Pre-Cleaner Cap Assembly fits: Ford order a low V.O.C. acetone formula.
models (All w/ 3" I.D. base & 7" bowl)
MIS106 $29.95
ac
fits: Some 2610 - 6810 (1982-93) 901 up to SN: 126524 w/ 1/4" fuel line
Replaces: C0NN9A663A, 80073533, 73533, gas, diesel (1954-60); 1801, 4000 both
Can replace Donaldson bowl P020227 4-cyl. diesel (1958-64), Replaces: 311292
in
NOTE: Clear plastic. FDS483 $15.95 Fuel Shut Off Valve fits: 2000 3-cyl.
ABC338 dimensions: Bowl O.D. at top - 7"; Cone I.D. at top - - 7810; Industrials: 3400 - 755B (1965-
e
3-1/2"; Bowl side height - 3"; Overall height - 4-1/8" 96) gas, diesel; Dexta, Major, Supers
ABC510 $64.60
(1952-64), Replaces: E2NN9N200A,
St
ABC106 $29.95
.©
Fuel Cap (Vented) w/ Gasket fits: 9N -
Underside view TW35 (1939-90) Sediment Bowl Assembly w/ 7/16" Bolt
Replaces: C5NN9030B, E7NN9030AA 7/16" Hole fits: 800, 801, 900, 901, 1801 (1958-60)
MHS043 $9.95 (2-7/8" O.D.) NOTE: Zinc finish, can (All gas SN: 126525 & up), Replaces: 311272
nc
(Zinc)
be painted. (1/4" fuel line thread) NOTE: Use caution
New Holland
when threading in the fuel line. Filter is
Ford
not returnable if threads have been cross
,I
threaded.
Underside view
FDS3363 $29.95 Sediment Bowl Assembly fits: Some Late
ts
MHS043GK $1.50 Gasket only (For ABC003, MHS043)
801, 901, 1801, 4000 4-cyl. series gas SN:
Chassis parts
USA made
126525 & up (1960-64); 6000 series gas
ar
using 7/16" mounting bolt & 5/16" fuel
line thread, Replaces: C0NN9155A
Sediment bowl assemblies, parts (7/16" bolt hole, 5/16" fuel line thread)
rP
NOTE: Use caution when threading in the
Order # Price Description / Application
fuel line. Filter is not returnable if threads
ABC038 $20.75
have been cross threaded.
to
(3/8" pipe inlet, 1/4" tube outlet) ABC294 ABC346 FDS3280 FDS1780
Tr
Bowl Assy:
USA made NOTE: 1954-64.
Order # Price Description
ABC346 $4.65 Filter Screen & Gasket Set
St
FDS1785 $1.79 Fuel Filter Valve Stem to Carb Body Gasket ABC3882 $4.50 Fuel Filter Bowl fits the following diesels
(For ABC106, FDS2620, FDS3363) w/ original CAV filters: 2310 - 8210,
Replaces: NCA99180A (0.443" I.D. x 0.600" 2600 - 7600, 3230 - 8830, (4100 1975-81),
O.D. x 0.047" thick) NOTE: 2 used per (4110 3-cyl. 1981-2/90), TW5 - TW35;
tractor; Sold individually. Industrial: 230A -755B, A64, A66
Replaces: 505874, D8NN9162BA
FDS2616 $16.50 Sediment Bowl Retaining Bolt
(1" I.D. center hole, 2" tall, 3.300" O.D.
(For ABC040), Replaces: 86531362
bowl, 3.689" O.D. gasket mounting
(3/8") USA made
flange, flat bottom w/ squared edge)
FDS2620 $24.50 Sediment Bowl Retaining Bolt NOTE: Glass. Measure before ordering
(For ABC106, FDS1785, FDS3363) as more than one size & style was used.
.©
Replaces: C0NN9A349B Gasket not included.
(7/16") USA made
nc
New Holland
,I
FDS485 $15.50
230A - 5500 (1965-82) gas
Replaces: 500621, C5NE9155D, Fuel Line Assembly fits: 9N, 2N, 8N
C5NE9165D, D4NN9155A (1939-52), Replaces: 9N9282A
ts
(1/4" tube w/ 7/16-24 fitting)
Chassis parts
ar
FDS3458 ABC4280 FDS1603 $4.95 Rubber Bumper Anti-Rattler fits: 9N,
Description Order # Price 2N, 8N (1939-52), Replaces: 9N9121A,
Sediment Bowl Assembly..................................FDS3458...........$38.50 9N9121 (0.985" O.D., 0.500" tall)
rP
NOTE: See website for full applications. NOTE: Fits between fuel line & tank.
NEW! Gasket only (For FDS3458).....................ABC4280...........$1.95 FDS487 $29.95
Fuel Line Assembly fits: NAA, Jubilee
(1953-54), Replaces: NCA9282C
to
(1/4" tube)
Fuel filters
ac
Order # Price Description / Application FDS1544 $23.95 Fuel Line fits: 600 series, 601 series, 700,
ABC490 $6.45 In Line Fuel Filter w/ Hose & Clamps 740, (2000 4-cyl.), 2111, 2030, 2031, 2120,
fits: Ford models using a 3/8" fuel line 2130, 2131 gas (1954-64) (All w/ 134 C.I.
Tr
bowl is needed order ABC3895. Use FDS1549 $48.95 Fuel Line fits: Some 801, 811, 821, 841,
caution when threading fuel line in, as 851, 861, 871, 881, 901, 941, 951, 961, 971,
St
it is not returnable if threads have been 981, 1801, 1811, 1821, 1841, 1871, 1881
cross threaded. (All w/ SN: 11977 - 126524 & 172 C.I. gas
ABC1421 $5.50 engine) (1958-60), Replaces: 310918
EACH Diesel Fuel Filter Element w/ Seals (1/4" tube, 15-1/2" long)
(For Cav/Simms diesel fuel filters) FDS1551 $149.95
fits: 2000 3-cyl. - 9600 (1965-88) (All w/ NEW! Fuel Line fits: 801, 811, 821, 841,
2.85" tall element), Replaces: 83937061, 851, 861, 871, 881, 901, 941, 951, 961, 971,
D8NN9N074AA, Cav 7111/296 981 (All w/ SN: 126525 & up & 172" gas
(3-1/2" O.D. x 3/4" I.D. x 2.85" tall) engine) (1960-64), Replaces: 86580561,
NOTE: Sold individually. C0NN9289E (5/16" tube) USA made
Quadrant Throttle Plate fits: 9N, 2N Throttle Control Rod fits: NAA - 4000
(1939-47), Replaces: 9N9820 4-cyl. gas (1953-64), Replaces: NAA9815F
(4-1/8" o/a length)
.©
3-pc. Screw Kit (For Quadrant Throttle
Plate) fits: 8N (1947-52), Replaces: 28319S7
(10-24 x 3/8") USA made Clutch kits, parts
nc
Order # Price Description / Application
FDS413 $46.45
New Holland
Clutch kits, parts
Lever (For Throttle) fits: 8N (1947-52)
Ford
Replaces: 8N9805 FDS259 $146.95 Clutch Kit fits: 9N, 2N, 8N, NAA, Jubilee,
,I
600, 700, 800, 900 (1939-57) (All w/ 3
or 4 speed) (9", 10 splines) NOTE: Kit
FDS1610 $14.95 includes new pressure plate, clutch
ts
Throttle Bellcrank Friction Disc Spring
disc, throw out bearing, pilot bearing,
Chassis parts
Washer fits: NAA, 501, 600, 700, 800, 900,
2000, 4000 4-cyl. gas, LP (1953-64) alignment tool. Does not include pilot
ar
Replaces: NAA99778B bushing for NAA, Jubilee.
FDS087 $29.95
FDS073 $3.50 Throttle Friction Disc fits: Jubilee, NAA, Clutch Disc fits: 9N, 2N, 8N, 600, 700, 800,
rP
501, 600, 601, 700, 701, 800, 801, 900, 901, 900 up to SN: 14257 (1939-57)
2000, 2600, 2610, 3000, 3600, 3610, 4000, Replaces: 91A7550, NAA7550A
4600, 4610, 5000, 5600, 5610, 6600, 6610, (9", 10 splines, spring loaded, 1-3/8"
7700, 7710, 7910 (1939-91); Industrials: spline I.D.)
to
(10-1/4") NOTE: Vertical control linkage. FDS1133 $479.85 Dual Clutch Kit fits: Dexta, Super Dexta,
660, 661, 860, 861, 960, 961, 2000 4-cyl.,
FDS156 $18.90 Throttle Control Linkage (Governor to 4000 4-cyl. series (1955-64) (All w/ 5
carburetor) fits: 9N, 2N, 8N (1939-52) speed transmission live PTO)
Replaces: 9N9818A Replaces: 311435 (9" dia. dual clutch,
(7") 1-7/8" x 29 PTO spline & 1" x 15
FDS158 $27.45
transmission spline) NOTE: Kit includes
Throttle Control Linkage (Throttle to new dual clutch assembly (no core
governor control) fits: 8N (1947-52) needed), pilot bearing, throw out
Replaces: 8N9815 bearing.
(23-3/8")
Clutch kits, parts continue on next page
Clutch Throw Out Bearings FDS032 $134.50 Countershaft fits: 9N, 2N (1939-47)
ABC496 $19.95 Clutch Throw Out Bearing fits the w/ 3 speed transmission
following w/ 4 speed single clutch: 9N, Replaces: 9N7111
2N, 8N, Dexta, Major, NAA, Jubilee, 541,
FDS3304 $129.99 Countershaft fits: 8N (1947-52)
600, 700, 800, 900, 1801, 2000 4-cyl., 4000
4-cyl. series (1939-64); Fits the following w/ 4 speed transmission
1965-84 w/ 11" single clutch: 2000 3-cyl., Replaces: 8N7111 (11.887" o/a length)
2600, 2610, 3000, 3400, 3500, 3550, 3600, FDS016 $172.50 Countershaft fits: NAA, Jubilee,
3610, 231, 233; Fits the following made Golden Jubilee (1953-54)
10/1969 - 9/1971 w/ 11" 3 lever pressure Replaces: NAA7111C
plate & w/out PTO: 4000 3-cyl., 4110, (12-1/2" total length)
.©
4400, 4500, Replaces: C0NN7580A, FDS017 $168.50 Countershaft fits: 501, 600, 700, 800,
787580A8 (2.078" I.D., 0.801" thick, 900, 1801, 2000, 3000, 4000, 4500
3.269" face dia.) NOTE: Measure before series (1954-75) (All w/ 4 speed
nc
ordering. transmission), Replaces: NDA7111C
New Holland
ABC2501 $21.95 Clutch Throw Out Bearing fits the (13" total length)
Ford
following w/ dual clutch: 660 - 961, FDS328 $9.30 Transmission Drain Plug w/ Gasket
,I
Dexta; Fits the following w/ single or fits: 9N, 2N, 8N, NAA, Jubilee; Also
dual clutch: 2000, 3000, 4000, 5000 - TW5 fits as an Oil Fill Plug on 8N when
(1955-93), Replaces: 86534551, 82010859 using later model shift cover, NAA -
ts
Chassis parts
(2.490" I.D., 4.060" O.D., 0.870" wide) 4000 4-cyl., 4 speed (1939-64)
NOTE: Sealed bearing, no need to Replaces: 9N7010 (2-1/2" O.D., 2"-12
ar
grease. See website for full applications. UN thread)
FDS1265 $58.50 ABC291 $1.25 Gasket only (For FDS328) USA made
Throw Out Bearing Carrier fits the
rP
FDS1558 $14.50 Transmission Filler Cap w/ Gasket
following w/ double clutch & 5 speed
fits: 8N (1948-52) using original shifter
transmission SN: 14256 & up: 661, 861,
cover w/ tang style filler cap
961, 2000, 4000 4-cyl. series (1958-64) (All
Replaces: 8N7485 (cap), 8N7037B
w/ live PTO), Replaces: 311260, 86539876
to
FDS3971 $32.50 NEW! Transmission Seal & Gasket Kit DEC451 $8.99
fits: 2N, 8N, 9N (1939-52) Transmission Shift Pattern Decal
Replaces: D5NN7223A, 8N7011, fits: 2000, 3000, 4000 series (1965-85);
8N7052A, 9N4662, 9N7086, 9N7223 Industrials: 230A - 540A w/ 8 speed
NOTE: Also fits Golden Jubilee, transmission & Live PTO
Jubilee, NAA except as a Replaces: C5NN7B292, D3NN7B292B
transmission to rear end gasket (3-15/16" x 5-1/4") USA made
which is available by also ordering
FDS2479 $99.95 Transmission Shift Cover Assembly
FDS3979 gasket.
fits the following w/ internal safety
FDS3357 $149.95 Transmission Seal, Bearing & Gasket switch & 6, 7, 8 speed transmission:
Kit fits: 2N, 8N, 9N (1939-52)
.©
2000, 3000, 4000, 5000 series (10/1966-
Replaces: (2) 9N7086, (1) 8N7052A, (1) 74), Replaces: 81814737 (Main lever
9N7120, (4) 9N7066, (4) 9N7067, (1) is 13-1/4" tall from cover up) NOTE:
9N4662, (1) 9N7223, (1) 8N7223
nc
Stamped steel. Includes brass fill
NOTE: Also fits NAA & Jubilee w/ plug, (2) shift levers, knobs, boots.
New Holland
purchase of FDS3979 gasket. Has provision for dipstick, dipstick
Ford
ABC288 $3.30 Transmission Gear Shift Cover Plate not included. See website for
,I
Gasket fits: 8N, NAA, Jubilee, 541, 600, complete applications listing.
601, 700, 701, 800, 801, 900, 901, 1801, FDS2479GK $5.25 Transmission Shift Cover Gasket only
2000, 3000, 3400, 3500, 4000, 4400, 4500
ts
(For FDS2479)
series w/ 4 speed transmission (1947-
Chassis parts
ABC2639 $64.95 Sherman Transmission Shift Cable w/
75), Replaces: D5NN7223A USA made
Knob fits: 9N, 2N, 8N (1939-52) using
ar
FDS3998 $34.50 NEW! 12-pc. Transmission Seal & Sherman cable shifted transmission,
Gasket Kit fits: 600, 601, 700, 701, step up / step down, Replaces: 10B195
800, 801, 900, 901, 2000 4-cyl., 4000 (3/8" - 24 NF inner ends & 1/2" - 20
rP
4-cyl. (1954-64) (All w/ 4 speed NF outer end thread; 31-1/2" o/a
transmission) NOTE: See website for length)
replacement numbers.
FDS1451 $49.95
to
FDS3996 $6.50 NEW! Transmission Gear Shift Transmission Main Shift Lever
Cover Plate Gasket fits: 600, 650, (For 1, 2 & 3rd speed gears) fits: Dexta,
651, 660, 661, 800, 850, 851, 860, 861, Super Dexta (1957-64)
ac
900, 950, 951, 960, 961, 2000 4-cyl., Replaces: 81717916, 957E7210C
4000 4-cyl. (1954-64) (All w/ 5 speed (11.89" long, 5/16" - 24 N.F. thread
transmission), Replaces: NDA7223A pitch)
Tr
FDS410 $79.95
Gear Shift Lever w/ Knob fits: 8N,
FDS3921 $149.95
NAA, Jubilee, 501, 600, 700, 701, 800,
Transmission Shift Cover Assy. w/
900, 1801, 2000, 3000, 3400, 3500, 4000,
Levers fits: Dexta, Super Dexta (1957-
er
FDS1892 $9.95 Gear Shift Lever Spring fits NOTE: Double lever w/ knobs.
the following w/ 3 or 4 speed
e
5000, 7000 (1965-74); 231, 233, 335, FDS143 $69.95 Steering Wheel fits: 9N (1939-40); Ford
420, 515, 532, 535, 2600, 3600, 4100, 1-1/2 ton trucks (1941-46)
4600, 5600, 7600 (1975-81); 2610, 2810, Replaces: 9N3600B (18" dia., keyed hub,
2910, 3610, 3910, 4110, 4610, 5610, 11/16" - 13/16" tapered shaft, 4 covered to
5900, 6610, 7610 (1981-91) 3230, 3430, center spokes) NOTE: Includes chrome
3930, 4130, 4630 (3/1990-91), Replaces: plated steel cap.
C5NN7213A (1.640" dia. 3/8"-24 NF)
ABC502 $2.50 Steering Wheel Nut only (For FDS143)
NOTE: Bakelite.
FDS308 $49.95
FDS088 $3.55
.©
Steering Wheel fits: 9N, 2N (1939-47)
Gear Shift Boot fits: All Ford models (17-5/8" dia., keyed tapered hub, 11/16"
(1939-88) w/ 3 & 4 speed transmission - 13/16" shaft, 3 covered to center spokes
nc
Replaces: C5NN7277C, 8N7277, w/ ribbed outer hand grip)
New Holland
C0NN7277
FDS112 $44.95
Ford
,I
Replaces: 2N3600
(17-5/8" dia., keyed tapered hub, 11/16" -
13/16" shaft, 3 bare spokes)
ts
Select-O-Speed transmission parts
Chassis parts
ar
FDS1229 $48.95 NOTE: Chrome.
Select-o-Speed Control Selector Lever ABC1591 $5.95 Dome Nut Washer (For FDS112, FDS195)
fits the following w/ Select-o-Speed NOTE: Clear zinc plating.
rP
transmission: 611, 671, 681, 771, 811, FDS111 $44.95 Steering Wheel fits: 8N, NAA, Jubilee, 501,
871, 881, 971, 981, 1811, 1871, 1881,
600, 700, 800, 900, 2000, 4000 4-cyl. series
2000 4-cyl., 2111, 4000 4-cyl., 4121
(1947-64); Serviceable for 1801
(1959-64), Replaces: C0NN7202B
to
FDS426 $4.95
C0NN7B155A Steering Wheel Nut (For FDS363)
Also fits 1801, 4040, 4140, 6000 series
Replaces: C5NN3N602A, D5NN3N602A
FDS493 $99.99
Clutch Torque Limiter Disc fits: 611, (11/16" x 20 NF)
671, 681, 771, 811, 871, 881, 971, 981, FDS2851 $4.50 Steering Wheel Cap fits: Same as FDS363;
1811, 1871, 1881, 2000 4-cyl., 2111, 4000
Also fits 5610S, 8000, 9000
4-cyl., 4121, (1959-64), 6000 (1961- 67)
Replaces: C7NN3655B, 82002600
(All w/ Select-o-Speed transmission),
(2.128" O.D. where cap slips in steering
Replaces: 313875, E8NN7A539AA (7-
wheel; 1.025" tall; 2.380" O.D. above
1/4" O.D., 20 spline, 1.080" spline I.D.)
steering wheel)
.©
(17-1/2" dia., 1" dia. shaft w/ 6 splines on
FDS1380 $6.95
end, 3 covered to center spokes)
Upper Steering Column Bushing
FDS215 $52.95
nc
(For Manual & Power Steering)
Steering Wheel fits: Dexta, Super Dexta fits: 2000 - 7610 (1965-91), Replaces:
New Holland
(1957-64), Replaces: 957E3600 C5NN3517A, D5NN3517A, 81811803
Ford
(17-3/4" dia., 1-1/4" shaft w/ 48 splines, (0.795" I.D. x 1.445" O.D. x 1.525" length)
,I
3 covered to center spokes)
ts
fits: 1100, 1110, 1120, 1200, 1210, 1215,
Chassis parts
1220, 1320, 1520, 1620, 1715, 1720, 1920, Steering wheel plates - USA made
ar
2120 Japan built, 3415, T1510, T1520, Order # Price Description / Application
TC1510, TC1520, TC30, TZ18DA,
FDS163 $16.95
TZ22DA, TZ24DA, TZ25DA (1979-07)
rP
Replaces: SBA334300191 (15-3/4" dia.,
3-1/2" dish, 18 splines) NOTE: Verify Sherman Transmission Instruction Plate
spline count before ordering. fits: Ford models w/ Sherman Step Up /
Step Down transmission (1939-64)
MIS103 $12.50
to
FDS162 $11.95
er
Steering column grommets, bushing Power Steering Plate fits: 600, 700, 800, 900,
in
Order # Price Description / Application 2000 4-cyl., 4000 4-cyl. series (1957-64)
FDS229 $4.95
.©
FDS046 $79.95 801, 900, 901, 2000, 4000 4-cyl. (1947-64);
Steering Shaft w/ Pinion fits: 9N, 2N
(1939-47), Replaces: 9N3525 6000 (1961-67), Replaces: 8N3518 (seat),
8N3520 (spring), C5NN3N716A (steel
nc
FDS408 $17.95 bearing assy)
Steering Wheel Cover w/ Grease Fitting
New Holland
Hole, Spring & Felt Seal fits: 9N, 2N ABC3678 $22.50 9-piece Steering Gear Box Shim Kit
(1939-47), Replaces: 9N3669
Ford
,I
NOTE: Chrome. 8N, NAA, Jubilee, 600, 800, 2000, 2600,
2610, 3000, 3600, 3610, 3910 series (1947-
FDS388 $79.95 Steering Shaft Bearing Kit fits: 9N, 2N 2/90), Replaces: 8N3549, 47432118 (002"
ts
(1939-47); 700, 900 (1954-64) steel shim (2), .005" steel shim (2), .010"
Chassis parts
Replaces: 68-3571A (bearing), 9N3573 steel shim (2), .025" steel shim (1), .028"
(cone), B3552 (bearing cup) NOTE: Will steel shim (2)) USA made NOTE: See
ar
fit FDS046. Kit includes (2) bearings, (2) website for all applications.
cones, (2) bearing cups. Bearing & cup
FDS047 $149.50 Double LH Steering Sector (For manual
(race) must be used together. Do not
rP
& power steering tractors w/ adjustable
mix bearing or cup w/ old original parts.
steering box) fits: 8N SN: 216989 & up,
FDS188 $199.95
Steering Shaft & Nut Assembly fits: Early NAA, Jubilee, 600, 800, 2000, 4000 4-cyl.
8N up to SN: 216988 (1947-49) w/ 4 bolt series (1949-64), Replaces: 8N-3527-B
to
FDS110 $129.85 Steering Shaft & Nut Assembly fits: Late different tooth widths were made so
8N SN: 216989 & up (1949-52) w/ 2-bolt customer may have to purchase both
side sector, Replaces: 8N3575B FDS048 & FDS047.
Tr
mix bearing or cup w/ old original parts. were made so customer may have to
purchase both FDS048 & FDS047.
St
FDS108 $124.20
Steering Shaft w/ Recirculation Ball
ABC441 $24.95
Assembly fits: NAA, Jubilee, Golden Steering Sector Hardware & Seal Kit
Jubilee (1953-54), Replaces: NAA3575C (For manual & power steering tractors)
(22-1/4" long from tip to tip) fits: 8N SN: 216989 & up w/ adjustable
side sector gears, Jubilee, NAA, 600, 800,
FDS109 $124.20 2000 4-cyl., 4000 4-cyl. series (1949-64)
Steering Shaft w/ Recirculating Ball
Assembly (For manual steering only) Replaces: 251294 NOTE: Kit includes oil
fits: 600, 800, 2000, 4000 4-cyl. series seal, adjuster bolt, nut, washer, O-rings,
(1954-64), Replaces: NCA3575A shim washers, felt seal. 2 used per
(23-3/8" long from tip to tip) tractor; Sold individually.
.©
brackets, reservoir or pulley. Some Ford
ABC441. applications will require a new pressure
hose to be made.
ABC3737 $5.50 Steering Gearbox Side Sector Seal fits:
nc
8N, NAA, 600, 601, 800, 801, 2000, 2310,
ABC3275 $18.50 10-pc. Eaton Power Steering Pump Seal &
New Holland
2600, 2610, 3000, 3600, 3610, 3900, 4000, O-Ring Kit fits: 601 - 4000 4-cyl. (1957-64)
(All w/ Eaton belt driven power steering
4000SU, 4110, 4600SU (1947-81)
Ford
pump w/ reservoir on top of pump)
,I
Replaces: 8N3591B, C5NN3C615A,
NOTE: See website for all applications.
D5UZ3591A (1.125" I.D., 1.442" O.D.,
Includes filter O-ring. Fits ABC1233.
.200" wide) NOTE: 2 used per tractor;
ts
Sold individually. ABC3277 $12.50 Power Steering Pump Filter fits: 601 -
Chassis parts
4000 4-cyl. & Majors (1957-64) (All using
ABC2008 $12.50
Eaton belt driven power steering pump
Steering Gearbox Side Sector Seal
ar
w/ reservoir on top of pump)
fits: 700, 900 series (1954-64)
Replaces: AE33538A, E101LD9
Replaces: NCB3591B
(1.020" I.D., 2.990" O.D., 1.610" thick)
(1.375" I.D., 2.110" O.D., 0.315" wide)
rP
USA made NOTE: Used w/ ABC1233
apps. Check website for additional
ABC1996 $9.95 Steering Gearbox Side Sector Seal fits: application information. Reservoir
5000, 5110, 5600, 5900, 6410, 6600, 6610, gasket / O-ring not included.
to
0.250" wide) pump) fits: 601, 700, 701, 740, 801, 900,
901, 950, 960, 2000, 4000 4-cyl. series
FDS3213 $598.00
(1957-64), Replaces: 231102, EBJ33556A
Steering Gearbox fits: 8N SN: 216989 &
(3.750" O.D., .671" bore, .1/8" keyway,
Tr
up (1949-52) using (2) bolt side sectors 1/2" wide belt groove) NOTE: Cast iron.
Replaces: 8N3503B NOTE: This gearbox
is shipped dry & needs to have 90 wt. FDS1350 $247.50 Power Steering Pump w/ Reservoir
oil added before using. Must reuse old fits: 2000 - 2600, 3000 - 3900, 4000 - 4600,
er
Steering Gearbox fits: NAA, Jubilee, PSI) NOTE: Pressure is preset at 1100
Golden Jubilee (1953-54) (All w/ manual PSI. Has 1 return port, if your original
has 2 ports you will need to add a "tee".
steering), Replaces: NAA3503B
e
needs to have 90 wt. oil added before ABC3832 $8.50 Power Steering Pump Filter w/ Sealing
using. Must reuse old pitman arms. O-ring fits the following w/ Plessey
power steering pump w/ reservoir
FDS3224 $598.00 on the rear of the pump: 2000 3-cyl.,
Steering Gearbox fits: 600, 800, 2000 3000, 4000 3-cyl., 5000, 7000, 8000, 9000
4-cyl., 4000 4-cyl. (1954-64) (All w/ (10/1968-75), 2600 - 9600 (1975-81), 2610
manual steering); Fits Utilities only not - 8010, 4130 - 8830, TW5 - TW35,(1982-93)
Row-Crops, Highcrops, Offsets plus Industrials, Replaces: EDPN3K758A,
Replaces: NCA3503A, C3NN3503E 84536381 (3.980" O.D., 1.280" tall)
NOTE: This gearbox is shipped dry & USA made NOTE: See website for all
needs to have 90 wt. oil added before applications.
using. Must reuse old pitman arms. Power steering parts continue on next page
.©
Front Tie Rod End fits: Some 9N, 2N (1939-
FDS1163 $5.50 Power Steering Pump Cap fits: 2000 - 47), Replaces: 9N3270
TW35 w/ horizontal power steering (.687" - 18 RH thread, 3.187" to center of
pump reservoir (All 10/1968-93)
nc
post)
Replaces: C9NN3D588A, D2NN3A006B
New Holland
,I
2000, 2310, 2600, 2610, 2810, 2910, 3000, FDS2482 $94.95 early 4 bolt side sector steering gear box
3600, 3610, 4000 & SU, 4600 SU, 4610 (LH) FDS2487 Replaces: 8N3304A
(1957-89) (All w/ dual cylinder steering) FDS2482 Replaces: 8N3305A
ts
Replaces: D4NN3A540B, D4NN3D547B, NOTE: Adjustable from approximately
Chassis parts
ar
(1/2" dia. rod, 7/16" threaded end) ends are sealed and permanently greased.
USA made NOTE: LH & RH are the Grease zerks are cosmetic only.
same. FDS393 $74.99 Tie Rod Assembly (Tie Rod Ends, Clamps
rP
FDS461 $255.95 Power Steering Cylinder fits: 601, & Drag Link Tube) Fits: 8N SN: 216989
801, 2000, 2310, 2600, 2610, 2810, 2910, & up (1949-52) w/ late adjustable style
3000, 3400, 3600, 3610, 3910, 4000 & steering box
SU, 4600 SU, 4610, 231, 335, 531 (1961- Replaces: 8N3304B, 8N3305B
to
89) (All w/ dual cylinder steering) (32-1/2" long tube; 35-1/4 - 38-1/4"
Replaces: C5NN3A739G, C5NN3C578B, adjustment)
NOTE: Check measurement before
ac
D4NN3A540A, E9NN3A540AA
(5/8" dia. rod, 7/16" threaded end) ordering. Will also fit earlier 8N's when
USA made NOTE: Can also replace 1/2" late steering box is used.
rod cylinders. LH & RH are the same.
Tr
FDS315 $16.65
ABC267 $29.95 Power Steering Cylinder End fits: 2000, Front Tie Rod End fits: 8N (1947-52)
2610, 3000, 3610, 4610 series (1965-89) Replaces: 8N3270 (.687" - 18 LH thread,
Replaces: C5NN3A302B (7/16" - 20 4.00" to center of post)
er
.©
4110 3-cyl., 4140 3-cyl. (1965- 7/31/70)
Order # Price Description / Application (All w/ adjustable beam style axle
FDS336 $3.50 w/ provisions for the radius rod pins
nc
& 1-3/4" dia. center pin), Replaces:
Front Tie Rod Boot fits: 9N, 2N (1939-47) C5NN3010D, 81802760, 86580572
New Holland
Replaces: 78-3332 (20" from center of pin hole to end of axle,
Ford
(1.200" base, .475" tall, .500" hole I.D.) 1-3/4" center pin hole)
,I
FDS3940 $179.99 Front Center Axle w/ Bushing fits: 2000
FDS337 $3.99 3-cyl., 2100, (2310 1982 & up), 2600, 2610,
ts
Front Tie Rod Boot fits: 8N, NAA, Jubilee, 2810, 2910, 3000, 3100, 3110, 3120, 3600,
Chassis parts
600, 800 (1947-57), Replaces: 8N3332 3610, 3900, 3910, 4000SU, 4100, 4110,
(1.450" base, .600" tall, .550" hole I.D.) 4600SU, 4610SU; Industrial: 230A, 231,
ar
NOTE: Also works as a power steering 233, 333, 530A, 531 (8/1970 - 2/1990)
cylinder end boot 601 - 4610. (All w/ radius rods that pin to the axle
extensions, not the center axle & 2"
rP
FDS335 $9.50 dia. center pin), Replaces: C7NN3010F,
Rear Tie Rod Boot w/ Rubber Insert 81822706 (21-1/2" from center of pin hole
fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, to end of axle, 2" center pin hole)
2000 4-cyl., 4000 4-cyl. (1939-64)
to
ABC088 $34.95
Replaces: 9N3324, AONN3324A Front Axle Support Pin fits: 9N, 2N, 8N,
(1.425" base, .850" tall, .700" hole) NAA, Jubilee (1953-54); Early 600, 800
ac
Specify size when ordering (Base x Height x Hole I.D.) 801, 2000 4-cyl., 4000 4-cyl., series (Jubilee,
NAA when updated to threaded pin)
(1953-64), Replaces: NCA3127A
e
FDS3704 $59.95 ABC381 $12.95 Spindle Bushing Kit fits: 600, 700, 800,
(LH) 900 w/ wide front, 2000, 2600, 3600,
3900, 4000 except Vineyard, Dexta, Super
Spindle fits: 8N (1948-52); Golden Jubilee,
Dexta, 3000, 4100, 4600, 4600SU, 4610 (All
Jubilee, NAA (1953-54)
w/ standard axle) (1954-90)
FDS3704 Replaces: 8N3106,
Replaces: (2) 2N3109 (upper), (2)
F3NN3106AA
NCA3110A (lower) (2N3109 = 1.250" I.D.,
FDS3711 Replaces: 8N3105, F3NN3105AA
1.375" O.D., 1.500" long;NCA3110A =
(10.750" machined upright shaft, 1.250"
FDS3711 $59.95 1.352" I.D., 1.474 O.D., 1.490" long)
shaft O.D., 1.187" inner bearing dia.,
(RH) NOTE: Will not fit heavy duty or
0.750" outer bearing dia., machined for
industrial axles.
1/4 x 3/4" key) NOTE: Does not fit 9N
.©
or 2N unless you have a 8N spindle arm
and change the woodruff key.
nc
Seat pan, parts
New Holland
,I
Golden Jubilee, Jubilee, NAA, NAB, 8N, FDS067 $48.50
600, 601, (700, 701, 900, 901 w/ factory Seat Pan, Replaces: 9N400C
wide front end), 800, 801, 2000, 2600, (19" dia.; 5/8" center bolt hole)
ts
2610, 2810, 2910, 3000, 3600, 3610, 3900, NOTE: Steel, 9 hole. Uses 1-bolt mount.
Chassis parts
ar
LH & RH are the same. Uses 1/4" x ABC372 $18.30
Seat Repair Kit w/ Rivets (For ABC3211,
7/8" Woodruff key. See website for all FDS067), (5-1/2" O.D.; 5/8" center bolt
applications.
rP
hole) USA made
ABC151 $9.95
Thrust Bearing (For Front Spindle) FDS068 $44.95
fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 2000, 4000 series, Dexta, Seat Spring, Replaces: 9N404
to
ABC1442 $2.95
The following seat parts fit 8N, NAA, Jubilee, 501, 600, 700,
Spindle Dust Seal fits: 9N, 2N, 8N, NAA,
800, 900, 1801 series, 2000, 4000 4-cyl. series (1947-64), Some
Jubilee, 501, 600, 601, 700, 701, 800, 801,
Dexta, Super Dexta:
900, 901, 2000 4-cyl., 4000 4-cyl. (1939-64);
Order # Price Description / Application
2000 - 4600SU, 4610, 6000 (1965-90)
er
.©
Jubilee (1939-54) w/ optional Monroe® Deluxe seat; Also fits 6000 (1961-64) w/
Easy Ride seat, Replaces: 230279 Regular seat not Deluxe seat
Replaces: NDA462A
nc
IHS329 $29.99 Rear-Mounted Seat Shock Absorber
New Holland
ABC445 $146.95 Universal Full Suspension Seat w/ Back
w/ Bushings fits: 9N, 2N (1939-47) w/ Rest & 5-Angle Base (w/ slide track &
Ford
optional Monroe® Easy Ride seat mounting brackets) fits: 9N, 2N, 8N,
,I
(11-1/2" c.c. compressed; 18-1/8" fully NAA, Jubilee, 501, 600, 700, 800, 900,
extended) 1801, 2000, 2310, 2600, 2610, 2810, 2910,
MHS044 $41.75 Seat Shock Absorber w/ Bushings 3000, 3400, 3500, 3550, 3600, 3610, 3910,
ts
fits: 8N, NAA, Jubilee (1947-54) w/
Chassis parts
3930, 4000, 4000SU, 4100, 4110 4400, 4500,
optional Monroe® Easy Ride seat 4600, 4600SU, 4610, 5000, 5600, 5610,
ar
Replaces: 231239 (Center-to-center 5610SU, 5900, 6600, 6610, 7000, 7600, 7610
compressed = 6-1/4", fully extended = (1939-92) (All w/out cabs)
8-1/4) NOTE: One horizontal bolt hole Replaces: D9NN400DB12B NOTE: Can
rP
at each end. be adapted to fit many utility tractors
ABC526 $9.65 & lawn mowers. Customer may have
Seat Shock Bolt (For IHS329, MHS044)
to trim base on tractors using remote
Replaces: 230290 (7/16"-20 NF, .625"
hydraulics.
to
(Black)
seat, Replaces: 230288 (5/8" dia. hole) E2NNA405AA99B
NOTE: Rubber. 2 used per horizontal FDS3907 Replaces: E2NNA405AA99M
bolt; Sold individually. NOTE: See website for full
in
applications.
e
Seats, parts
St
FDS299 $54.95 Rubber Seat Spring fits: 501, 600, 700, 800,
(LH)
900, 1801, 2000, 4000 series (1955-64) w/ Knoedler seat part
FDS300 $54.95 "Rest-O-Ride" seats; Major, Super Major, Fits: 9N - 4000 4-cyl. series, 4030, 4040,
(RH) Power Major w/ Deluxe seat; 6000 (1961- 4121, 4130, 4140 (1939-64) (All w/
64) w/ Regular seat not Deluxe seat Knoedler 1800 seat) (3/8" I.D., 1" O.D.,
FDS299 Replaces: NDA448A 1-1/8" flange) USA made
FDS300 Replaces: NDA447A
Description Order # Price
NOTE: FDS299 & FDS300 do not come
Seat Bearing (For Aftermarket Knoedler Seats)..ABC537......... $14.30
w/ bushings. You must reuse old ones or
FDS299 FDS300 NOTE: 2 to 8 used per tractor; Sold individually.
purchase our FDS477 kit.
.©
Tractor Seat Pad (Dark blue w/ white FDS102 $172.50 Fender Skin only w/ raised Ford
piping w/ white "Ford" script) "script" imprint fits: 8N (6/1950-52),
Jubilee (1953), NAA (1954)
nc
Replaces: 8N16312C
New Holland
,I
Tractor Seat Pad (Red & white w/ red Serviceable for 600 - 4000 4-cyl. (1939-
"Ford" script) 64) when not equipped w/ sway bar
brackets or loader brackets
ts
Replaces: 375651S8 NOTE: Includes 4
Chassis parts
ar
FDS414 $248.30
Fender Skin only w/ raised Ford
Tractor Seat Pad (Blue & white w/ blue "script" imprint fits: 600, 800 series
rP
"Ford" script) (1954-57), Replaces: NCB16312C (25" H
x 48" W x 7" wide 'top lip')
NOTE: Steel, primer paint.
FDS322 $42.50 ABC437 $1.00 Rivet (For Fender Skin) fits: 9N, 2N,
to
(17-3/4" H x 42" W)
MIS006DB $34.75 NOTE: Steel, primer paint.
FDS301 $186.70
e
(w/ script)
Fender Assembly w/ Bracket w/
Tractor Seat Cushion (Blue & white)
St
.©
Licensed by Ford.
FDS170 $46.95
FDS214 $53.45
Fender Light Brackets, Pair fits: 9N,
Fits: 501, 600, 700, 800, 900, 2000,
nc
2N, 8N, NAA, Jubilee (1939-54)
4000 4-cyl. series (1954-64), Replaces:
New Holland
Replaces: 9N13470, 9N13471
NCA17005A NOTE: Fits between step
NOTE: Ford grey. Sold as pair.
Ford
plate & rear axle housing.
,I
FDS3670 $44.95 Fits: 2000 - TW35 (1965-93), Industrials,
ts
340A - 545D; Also serviceable for 501 - 981
Chassis parts
Running boards, parts when toolbox is mounted on the fender
Replaces: C5NN17005C, 83935319
ar
Order # Price Description / Application
ABC439 $69.95
(15" o/a length, 8-3/4" c.c. w/ (2) 5/16"-
(LH) 18 NC threaded mounting holes, lower
center side of the box has a 5/16"-18 NC
rP
threaded mounting hole) NOTE: See
Running Board (Foot Platform) w/out
website for all applications.
Rear Bracket Serviceable for 9N, 2N
ABC308 $39.99
ABC440 $69.95 (1939-47)
to
ABC472 $32.95
ABC446 $15.35
Rear Bracket Serviceable for 9N, 2N
Tr
ABC2953 $26.50 FDS241 $20.95 Parking Brake Lever fits: NAA, Jubilee,
(2-pc. set)
600, 700, 800, 900 (1953-57)
Replaces: NAA2782A NOTE: 2 used per
tractor; Sold individually.
Bonded Brake Shoe Set fits: 8N, NAA, FDS3672 $38.95 Bonded Brake Shoe Set fits: 2000 3-cyl.,
ABC083 $49.95 Jubilee (1947-54), Replaces: 8N2200B 2600, 2610, 3000, 3400, 3500, 3600, 3610,
(4-pc. set) 4110LCG (All built between 12/1966
- 4/1983 only), Replaces: C5NN2218F,
F2NN2218AA (1-1/2" wide) NOTE: Set
includes 2 brake shoes for 1 side.
.©
FDS3668 $64.95
FDS1445 $99.95 Brake Drum fits: Same as FDS3672
Brake Backing Plate fits: 8N, NAA, Replaces: C5NN1126E (16" O.D., 13-7/8"
nc
Jubilee (1947-54), Replaces: 8N2212B I.D., 1-1/2" wide) NOTE: Cast.
New Holland
FDS417 $5.10
,I
EACH 2310, 2600, 2610, 2810, 2910, 3000, 3600,
FDS194 $84.25 3610, 3900, 4000, 4000 SU, 4100, 4110,
Brake Dust Shield w/ Felt Seal fits: 8N,
4500, 4600; Industrials: 230A & up (1965-
NAA, Jubilee (1947-54), Replaces: 8N2255
ts
90), Replaces: C5NN2472B, E1NN2472BA
(plate), 8N2217 (seal) NOTE: 2 used per
Chassis parts
ar
Sold individually. Go to website for full
FDS251 $4.95 Felt Seal only (For Brake Dust Shield)
applications.
fits: 8N, NAA, Jubilee (1947-54)
Brake Pedal Shaft Seal fits: 2000
rP
Replaces: 8N2217 USA made ABC1501 $9.95
NOTE: 2 used per tractor; Sold 3-cyl., 3000, 3400, 3500, 4000, 4400,
individually. 4500, 5000, 7000 (1965-75), Replaces:
D9NN2N289AA, 83924047
ABC084 $19.95
(1.125" I.D., 1.565" O.D., 0.250" wide)
to
per tractor; Sold individually. ABC3797 $3.25 Brake Rod Boot Seal fits: 2810 - 8210,
3900, 4000 3-cyl., 4000SU - 7700, 4600,
MFS2948 $35.70
4600SU - 7600, 4140 3-cyl. - 8340, TS90,
Tr
NEW! Bonded Brake Shoe Set 2-1/2" O.D.) NOTE: 2 used per tractor;
fits: Dexta, Super Dexta (1957-64) Sold individually. See website for all
MFS2628 $69.95 Replaces: 957E2019A applications.
(4-pc. set)
in
ABC1225 $2.35
Disc Brake Ball fits: 2810 - 7710 (1965-90)
Replaces: D5NN2N141A (7/8" dia.)
e
FDS1870 $0.75 FDS1205 $1.99 Brake Cross Shaft Felt Seal fits: 2000
Brake Drum Retaining Screw fits: 8N -
3-cyl. - 8340 (1965-95), Replaces: 81826045
981 (1947-59); Dexta, Super Dexta (1957-
USA made NOTE: Felt. 2 used per
64), Replaces: 24667S, 24667S8
tractor; Sold individually. See website
(3/8"-16 NC x 3/4") NOTE: Zinc. 2 to 4
for all applications.
used per tractor; Sold individually.
IHS1136 $5.75 Actuating Spring (For Disc Brakes)
FDS412 $7.10 fits: 2810 - TS110 (1965-03)
Brake Adjusting Hole Cover fits: 8N,
Replaces: C5NN2N320A, 84814903
NAA, Jubilee, 501, 600, 601, 800, 801, 900,
(1.095" o/a length, .825" O.D., .110" dia.
901, 2000, 3000, (4000 4-cyl.) series (1947-
wire) NOTE: Sold individually. See
83), Replaces: H2092, ERK27670
website for all applications.
FDS252 $36.60
Fits: 8N, NAA, Jubilee (1947-54)
Rear end overhaul gasket kit
Replaces: 8NAA2250
.©
Order # Price Description / Application
NOTE: Repairs 1 side.
ABC433 $11.90
7-pc. Rear End Overhaul Gasket Kit
nc
ABC165 $89.95
Fits: 501, 600, 601, 800, 801, 900, 901, 2000 fits: 9N, 2N, 8N (1939-52)
New Holland
4-cyl., 4000 4-cyl. series (1954-64) (14-11/16" O.D. axle housing gasket)
Ford
Replaces: NCA2250
,I
NOTE: Repairs 1 side. FDS3976 $27.99 NEW! 21-pc. Premium Rear End
Overhaul Gasket Kit fits: Jubilee, Golden
Jubilee, NAA (1953-54) NOTE: Steiner
ts
exclusive! This is the only complete
Chassis parts
kit on the market! See website for
Differential side cover
replacement numbers.
ar
gasket
Fits: 9N, 2N, 8N, (501 - 4000 4-cyl.) (1939-
64) EXCEPT Jubilee; Also a PTO Shifter
rP
Plate Cover to Differential Housing
Rear axle, hub, parts
Gasket for Ford models (1939-64)
Order # Price Description / Application
including NAA, Replaces: 9N4131
USA made ABC261 $149.95
to
FDS043 $79.95
Description Order # Price Rear Axle Hub Washer fits: 8N, NAA,
Pinion Shaft Seal..................................................ABC1543...........$13.95 Jubilee (1947-54), Replaces: 8N4293
USA made
in
FDS3989 $4.75 ABC234 $39.95 Wheel Clamp Lock Nut fits: 8N, NAA,
NEW! Rear Center Housing to
Transmission Case Gasket fits: 600, 620, Jubilee (1947-54) (1-1/4"-18)
630, 640, 700, 740, 800, 820, 840, 900, 940 NOTE: No re-threading necessary on
(1954-55) (All w/ 4 speed transmission worn shafts.
up to SN: 14256), Replaces: NCA44025A Rear axle, hub, parts continue on next page
FDS1201 $7.50 Rear Lug Stud fits: 9N, 2N (1939-47) Inner seals
Replaces: 9N1117 (5/8"-18 NF, 1.875" o/a ABC382 $16.95 Rear Axle Shaft Inner Oil Seal Pair
length) NOTE: 12 required per tractor; fits: 9N, 2N (1939-47) NOTE: This is
Sold individually. an improved differential seal which
FDS1211 $1.39 stops leakage from differential into
Rear Lug Nut fits: 9N, 2N (1939-47) the brakes. Installs w/out pulling axle
Replaces: 33806S7, 81871950 bearing. Slides on the axle & taps into
(5/8"-18 NF) USA made NOTE: 12 place at lip of bearing retainer. Must
required per tractor; Sold individually. pack the wheel bearing w/ grease when
using these seals. Sold as a pair.
FDS394 $2.45 Rear Lug Stud fits: 8N, NAA, Jubilee, 501, ABC196 $11.95 Rear Axle Shaft Inner Oil Seal, Pair
.©
600, 700, 800, 900, 1801, 2000, 4000 4-cyl. fits: 8N, NAA, Jubilee, 501, 600, 601,
(1947-64), Replaces: 312696 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl.
(5/8"-18 NF, 1-5/8" o/a length) series (Late 1952-64), Replaces: 8N4233A,
nc
USA made NOTE: 16 used per tractor; C4NN4233A (2.000" I.D., 2.754" O.D.,
New Holland
,I
600, 700, 800, 900, 1801, 2000, 2600, 2610, Dexta (1957-64), Replaces: 957E4233B,
2810, 2910, 3000, 3610, 3910, 4000 4-cyl., 81717512 (2.000" I.D., 2.879" O.D.,
4110 (1947-83), Replaces: 8N1134 0.312" wide)
ts
(5/8"-18 NF) USA made NOTE: 16 used
Chassis parts
per tractor; Sold individually. For 2600 & ABC282 $6.99 Rear Axle Shaft Inner Oil Seal fits: 2000,
up check thread size. 3000, 2600, 2610, 3600, 3610 (1965-83)
ar
Replaces: C9NN4N109A
ABC357 $10.65 Rear Axle Shaft Paper Gaskets / Shims
(1.869" I.D., 2.750" O.D., 0.504" wide)
fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
rP
Replaces: 9N4130, 8N4229E (0.015" thick) Outer seals
USA made NOTE: Use for seal between ABC194 $18.99
Rear Axle Shaft Outer Oil Seal, Pair
bearing retainer, axle housing or backing
fits: 9N, 2N (1939-47)
plate. Use in multiples to replace shims
Replaces: 9N4251, D6NN4251A
to
fits: 600, 601, 800, 801, 2000, 2600, 2610, metal seal retainers.
4000 4-cyl.; Industrials: 231, 233, 234, ABC3953 $4.99 NEW! Rear Axle Outer Seal fits: 600, 601,
e
531, 1801 - 4140 4-cyl. (1954 - 12/83) 800, 801 series, 2000 4-cyl., 2031, 2121, 2131,
(All w/out differential lock), Replaces: 4031, 4120, 4121; Also fits the following
St
.©
Replaces: 8N4284 (1-15/16" I.D., 2-3/16"
ABC266 $9.95
O.D.) USA made NOTE: Rubber. 2 used
per tractor; Sold individually. 3-pc. Hydraulic Lift Piston Ring Kit
(For ABC300) NOTE: Steel.
nc
FDS431 $3.95 Rear Axle Shaft Outer Oil Seal Retainer to
New Holland
Housing Gasket fits: 8N up to SN: 486752
(1947-mid 52), Replaces: 8N4225 ABC314 $26.85
Hydraulic Lift Piston fits: NAA,
Ford
,I
(3-3/4" I.D., 4-3/8" O.D.) NOTE: 2 used Jubilee (1953-54), Replaces: NAA530B;
per tractor; Sold individually. Optional for 9N, 2N, 8N when used w/
O-ring (NAA533A), back-up washer
ts
(NAA473A)
Chassis parts
Hydraulic lift parts ABC315 $1.29
ar
Order # Price Description / Application
O-Ring (For ABC314)
FDS457 $85.99 Hydraulic Valve Adapter w/ O-Rings,
rP
Bolts & Instructions fits: Dexta, Major,
501, 600, 601, 700, 701, 800, 801, 900, 901 ABC316 $2.99
series, 1801, 2000, 2600, 3000, 3600, 4000,
4600, series; Industrials: 230 - 545 (1954-90) Washer (For ABC314) USA made
to
external hydraulics off the tractor. fits: Dexta, (501, 600, 601, 700, 701, 800,
FDS4239 $39.95 801, 900, 901, 1801 series), 2000, 2600,
NEW! Hydraulic Lift Cover Block-Off
2610, 3000, 3600, 3610, (4000 4-cyl.) (1954-
Plate fits: Dexta, Major, 501, 600, 601 700,
Tr
(3-7/8" wide x 6-3/8" long) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
FDS3364 $295.00
601, 700, 701, 800, 801, 900, 901, 1801,
in
900, 901 series, 1801, 2000, 2600, 2610, 701, 800, 801, 900, 901, 2000 4-cyl., 4000
3000, 3600, 3610, 4000, 4600, 4610 series; 4-cyl. series (1947-64), Replaces: 374072S,
Industrials: 230 - 545 (1954-90) 73339S, 73339S-18 (5/16" O.D. x 7/8"
FDS3550 $618.75 Replaces: 311877, 290066 length)
(Double NOTE: Includes valve, levers, O-rings, ABC3599 $11.15 Hydraulic Lift Spring Seat Support
Spool) hoses, hose bracket & female couplers. fits: 2N, 8N, 9N, Dexta, Super Dexta,
Mounts on lift cover under the seat. Jubilee, NAA, 501, 600, 601, 800, 801, 900,
Will not fit compact tractors. 901, 2000 4-cyl., 4000 4-cyl. series (1939-
64), Replaces: 2N624, 957E624
(0.100" thick)
Hydraulic lift parts continue on next page
.©
FDS073 $3.50 Throttle Friction Disc fits: Jubilee, NAA, replacement numbers.
501, 600, 601, 700, 701, 800, 801, 900, 901,
nc
2000, 2600, 2610, 3000, 3600, 3610, 4000,
4600, 4610, 5000, 5600, 5610, 6600, 6610,
New Holland
,I
83924272 (3" O.D., 1/2" center hole) FDS153 $224.95 Hydraulic Pump Rebuild Kit fits: 9N, 2N,
NOTE: See website for all applications. 8N (1939-52) NOTE: Kit includes (1) base
gasket, Replaces: 9N611; (2) chamber
ts
ABC317 $7.95
repair kit, Repairs 9N621, 9N622; (2)
Chassis parts
Quadrant Stop Kit w/ Wing Nut & Flat cam block, Replaces: 9N617A; (2)
Washer fits: Ford models (1939-64) except
ar
piston, Replaces: 9N615; (1) PTO shaft
Majors, Replaces: 9N521 bushing, Replaces: 9N649A; (1) Safety
Valve, Replaces: 8N638; (1) sump plug
rP
ABC219 $6.05
gasket, Replaces: 8N7011; (2) side gasket,
Hydraulic Lift Oil Level / Dipstick Replaces: 9N613; (1) PTO shaft gasket,
fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: C5NN747A; (2) side plate
Replaces: NAA927C gasket, Replaces: 9N4131.
to
FDS365 $21.15
FDS416 $16.50 Hydraulic Lift Oil Level / Dipstick Hydraulic Pump Control Valve Assembly
fits: 600, 601, 800, 801, 900, 901, 2000 fits: 9N, 2N (1939-47)
ac
(LH)
ABC551 $100.75
Hydraulic Pump Complete Valve
Hydraulic lift cover repair gasket kits (RH) Chamber Assembly fits: 9N, 2N, 8N
Order # Price Application (1939-52)
er
.©
2N, 8N (1939-52) (All w/ Dearborn 19-8, numbers 19-338, 19-339, 19-419.
19-8A loaders), Replaces: 191196 ABC3867 $34.45 Front Hydraulic Pump Drive Shaft
(3" O.D., (4) pins 11/32" O.D. w/ 2-13/32"
nc
fits: 2000 4-cyl., 2030, 2120, 2130, 4000
pin spacing, 5/8" left hand threads in center
New Holland
4-cyl., 4030, 4120, 4130 (1962-64) (All w/
hole) NOTE: Use w/ ABC3894 shaft.
720 Ford loader using 19-251 pump drive
Ford
ABC1812 $29.95 Front Hydraulic Pump Drive Hub kit), Replaces: 197118 (8.375" o/a length,
,I
Adapter fits: NAA, Jubilee, 600, 800, 2000 0.980" O.D. w/ 10 splines (1) end, 0.750"
4-cyl., 4000 4-cyl. series w/ loaders 701, O.D. w/ 3/16" x 3/4" keyway (1) end, 10
702, 703, 723, 724, 725 (1953-64) splines)
ts
Replaces: 290421, 500934 (1" spline I.D.,
Chassis parts
FDS3755 $29.95
10 splines, 2-3/4" c.c. bolt holes, 4" o/a
ar
dia., 7/16" bolt holes) USA made Front Hydraulic Pump Drive Shaft
NOTE: For shaft use ABC1814. fits: 335, 601 - 681 series, 801 - 881 series,
2000 3-cyl. series, 3000, 3400, 3900, 4000
ABC1820 $36.75 Front Hydraulic Pump Drive Shaft
rP
3-cyl., 4110 3-cyl., 4130 3-cyl., 4140 3-cyl.
fits: Some 9N, 2N, 8N (1939-52) using
(1957 - 7/80) (All w/ 730 series loader)
Ford pump drive kits 19-22, 19-23,
FDS3755: Replaces: 292222
Replaces: 194354 (13" long, 3/4" O.D., 1
(7/8"-13 spline O.D. spline ends, 10.446"
end is 6 spline & the other end is 0.187 FDS3793 $38.50
to
o/a length)
keyway) USA made NOTE: Measure
before ordering. Use w/ ABC1809,
FDS3793: Replaces: 7701044
ac
ABC021.
(7/8"-13 spline O.D. ends, 11-5/8" o/a
ABC3894 $17.25 Front Hydraulic Pump Drive Shaft length) NOTE: Check dimensions before
fits: 9N, 2N, 8N (1939-52) (All w/ ordering as 3 different shafts were used.
Tr
.©
fits: NAA, Jubilee, Golden Jubilee
Replaces: CPN972C (1953-54); Serviceable for NAA876A
(3/4" wide vanes) USA made NOTE: See website for instructions.
FDS3659 $94.50 Vickers Hydraulic Vane Pump Shaft w/
nc
FDS4277 $3.99
Drive Key fits: NAA, Jubilee, Golden
New Holland
Jubilee (1953-54) (All w/ square vane NEW! 6-pc. Pump Manifold O-Ring Kit
Ford
,I
356961S (drive key) (4.035" o/a length,
0.452" spline O.D.) USA made
FDS3394 $94.50 Vickers Hydraulic Vane Pump Shaft w/
ts
FDS1262 $187.25 Hydraulic Piston Pump Gear Housing
Chassis parts
Drive Key fits: 600, 620, 630, 640, 650, 660, (For NCA600C or NCA600F pump)
700, 740, 800, 820, 840, 850, 860, 900, 940, Replaces: NCA905C USA made
ar
950, 960 (All up to SN: 66849 using the NOTE: Will fit pumps w/ tapered
square vane hydraulic pump) (1954-55) bearing style pump shaft not roller
Replaces: NCA966A (shaft), 356961-S bearing style pump shafts (NAA600C,
rP
(key) (4.442" long, 0.601" O.D. keyed end, NCA600E).
0.450" O.D. spline end) USA made ABC156 $64.99 Hydraulic Piston Pump Repair Kit w/
FDS3426 $89.95 Plate Assy. & Seal, Replaces: CCPN600A,
Vickers Hydraulic Vane Pump Pressure
to
NOTE: Manganese phosphate coating. NOTE: Piston type pump has replaced
vane type pump in many early models.
ABC3399 $14.95 Vickers Hydraulic Vane Pump Shaft Oil FDS2855 $64.95 Hydraulic Piston Pump Valve Seat
Tr
Seal fits: Same as FDS3394 Removal Tool; Also fits 6000 series using
Replaces: AD33623A piston type hydraulic pump
(0.968" I.D., 1.690" O.D., 0.313" wide) Replaces: FNH01306 USA made
ABC3000 $8.25 Vickers Hydraulic Vane Pump Outer NOTE: See website for additional
er
Piston pump, parts FDS438 $12.95 O-Ring & Gasket Kit USA made
The following piston pump parts fit Some NAA, Jubilee, 501, NOTE: Kit includes (2) different main
600, 700, 800, 900 series, 1801, 2000, 4000, 4-cyl. series pump body gaskets, (1) pump mount
(1953 - 64 - unless otherwised noted) gaskets, (1) pump body O-ring, (4) pump
Order # Price Description / Application manifold O-ring, (1) tach drive gasket.
FDS1919 $849.95 Includes the hydraulic manifold O-rings
Piston Hydraulic Pump, Replaces:
& quad rings for the Jubilee, NAA in
NAA600D, NCA600C, NCA600F
addition to the O-rings for the later
USA made NOTE: FDS1919 can replace
style aluminum hydraulic manifold.
vane style pump w/ purchase of FDS074
This is a Steiner exclusive & the only
piston hydraulic manifold lines.
comprehensive kit on the market!
.©
NOTE: Will fit pumps w/ tapered (For NCA600C or NCA600F pump)
bearing style pump shaft not roller Replaces: 8A1202B, D5NN1202A
bearing style pump shafts (NAA600C, NOTE: Will fit pumps w/ tapered
nc
NCA600E). bearing style pump shaft not roller
New Holland
bearing style pump shafts (NAA600C,
FDS4244 $59.99 NEW! Hydraulic Piston Pump Wobble
Ford
NCA600E).
,I
Plate Thrust Roller Bearing fits: Jubilee,
FDS334 $33.50
NAA, 501, 600, 601, 700, 701, 800, 801,
900, 901, 2000, 2031, 2100, 2150, 2300,
Hydraulic Piston Pump Main Drive Gear
ts
2310, 2600, 2610, 3000, 3150, 3190, 3300,
Chassis parts
3310, 3600, 3610, 4000, 4000SU, 4031, 4100, Replaces: C3NN908A
4110, 4120, 4121, 4131, 4140, 4190, 4200,
ar
4330, 4340, 4410, 4600, 4600SU, 4610, 6000;
Industrials: 230A - 545, 1801 - 4130 ABC200 $11.99
Replaces: NCA858A, C0NN858A
rP
Needle Bearing Assembly
(2.709" O.D.) USA made NOTE: Fits
(For Piston pump drive gear housing)
all w/ engine mounted piston type
Replaces: NCA881A, 36433
hydraulic pump (1953 - 4/83). See
to
Same as FDS4244, Replaces: NCA615C, 2000 3-cyl., 2600, 2610, 3000, 3600, 3610
81801696 (5/8" O.D.) USA made NOTE: (All w/ or w/out independent PTO); 4000
Measure piston O.D. on 1965 & up 3-cyl., 4600, 4610 (All w/out independent
in
models before ordering. Fits all w/ PTO); Industrials: 230A, 231, 233, 333,
engine mounted piston type hydraulic 335, 340A, 420, 445, 515, 530A, 531, 532,
pump (1953 - 4/83). See website for
e
FDS4256 $11.99 NEW! Hydraulic Pump Piston fits: Some iron body hydraulic piston pump) (1965
2000 3-cyl., 2600, 3000, 3600, 3600V, - 4/83)
4000 3-cyl., 4000SU, 4200, 4600, 4600SU; FDS3714 $14.95 Piston Hydraulic Pump Pressure Tube
Industrials: 231, 233, 333, 335, 3400, 3500, Nut Assembly fits: 2000 3-cyl., 3000, 3400,
3550, 420, 515, 531, 532, 535, 540, 4400, 3500, 3550, 4000 3-cyl., 4400, 4500 (1965 -
4500 (All using 9/16" O.D. pistons w/ 12/74) (All w/ engine mounted cast iron
engine mounted piston type hydraulic hydraulic piston pump)
pump 1965-4/83), Replaces: C5NN615A, Replaces: C7NNH856C, 81821215, 291320
C0NN882B, 81801695 USA made (For 1/2" pressure line) USA made
NOTE: Measure piston O.D. before NOTE: 2 used per tractor;
ordering. Sold individually.
.©
Replaces: NAA70038 ABC1501 $9.95 PTO Input Shaft Seal fits: 5000, 5600,
(1-3/8", 30-3/16" long) 5610, 6600, 6610, 6700, 6710, 7000, 7600,
FDS218 $139.95 Fits: 501, 600, 601, 700, 701, 800, 801, 900, 7610, 7700, 7710, 8000, 8600, 8700, 9000,
nc
901, 2000 4-cyl., 4000 4-cyl. series (1954-64) 9600, 9700 (1965-90) (All w/ 7 or 8 speed
New Holland
,I
ABC3437 $5.20 Outer PTO Shaft Bearing fits: 9N - NAA,
600, 800 w/ 1-1/8" PTO only (1939-
56); Also used as a PTO shifter support
ts
housing bearing: 9N - NAA, 501, 600,
PTO parts
Chassis parts
ar
ABC085 $4.50 Also used as a upper PTO countershaft
PTO Knob fits: Major Diesel, Power Major,
bearing fits: 1300, 1310, 1320, 1500, 1510,
Super Major (1952-64), Replaces: EBB7213
1520 HST, 1600, 1620, 1630, 1710, 1715,
rP
(1.985" dia., 3/8"-24 NF)
1725, 1925 (1976-98), Replaces: 9N715B,
NOTE: Bakelite.
SBA040106206, 210064 (1.181" I.D., 2.440"
ABC313 $1.00 PTO Cover Gasket (For 1-1/8" & 1-3/8" O.D., 0.629" wide) NOTE: Bearing is not
sealed. See website for all applications.
to
ABC140 $8.95 PTO Oil Seal, Double Lip fits: 9N, 2N MIS118 $62.35
when using late PTO; 8N, NAA, Jubilee, PTO Over-Running Clutch (1-1/8" Female)
501, 600, 700, 800, 900, 1801, 2000, 3000, fits: Tractors up to 75 horsepower
3550, 4000, 2600, 3600, 4100, 4600, 2610, Replaces: Hub City C670F
3610, 4110, 4610 (1943-89) (1-1/8" - 6 x 1-3/8", 6 spline)
Replaces: 9N703B, 83944079 (1.565" I.D.,
MIS138 $62.35
2.445" O.D., 0.630" wide) NOTE: For 1-1/8" PTO Over-Running Clutch (1-3/8" Female
when not held by a spring loaded sleeve & Male) fits: Tractors up to 75 horsepower
& pin to the shaft & 1-3/8" PTO shafts. Replaces: Hub City C660F
Seal may be narrower than original, but (1-3/8" - 6 x 1-3/8", 6 spline)
works fine.
.©
FDS368 $6.99 Front Wheel Lug Nut fits: 9N, 2N (1939- race) USA made NOTE: 2 used per
47), Replaces: 9N1012 (1/2" - 20 NF, tractor; Sold individually.
11/16" hex head) USA made NOTE: 10
FDS3848 $12.95 Front Wheel Bearing Kit fits the
nc
used per tractor; Sold individually.
following using front hub C5NN1104B,
New Holland
FDS288 $4.85 Front Wheel Stud Assembly w/ Nut C9NN1104F w/ SN: 137818 & up:
fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 501 - 901, 2000 4-cyl., 4000 4-cyl. (All
Ford
900 series (1947-56); Serviceable for 9N,
,I
w/ regular axle not H.D. axle), Dexta,
2N (1939-47) (.559" shoulder dia.) Super Dexta (1961-64); Also fits 2000
NOTE: Stud (1/2" - 20 NF) is exact of 3-cyl., 2600, 2610, 3000, 3600, 3610, 3900,
ts
original. Industrials: 233, 234, 333, 335 (1965-4/83)
Chassis parts
FDS286 $3.99 Front Wheel Stud only fits: 9N, 2N, 8N, Replaces: EHPN1200E (1.782" outer
race O.D., 2.329" inner race O.D.)
NAA, Jubilee, 501, 600, 700, 800, 900 series
ar
NOTE: ABC1310 seal needs to be
(1939-56), Replaces: C5NN1107E
ordered for tractors 1961-64. Measure
NOTE: Stud (1/2" - 20 NF) is exact of
inner race or verify front hub number
original.
rP
before ordering. See website for all
ABC268 $1.99 Front Wheel Stud only fits: 501 - 981, applications.
2000 - TW30, Dexta (All w/ 2 wheel drive FDS3852 $14.95 Front Wheel Bearing Kit fits the
& regular front hub) (1957-83) following w/ SN: 11978 & up & H.D.
to
USA made
Order # Price Description / Application
ABC1310 $4.99 Front Wheel Bearing Seal fits: 9N, 2N,
FDS285 $59.99
e
Front Wheel Hub fits: 8N, NAA, Jubilee (1961-67), Replaces: NCA1190A, 9N1190B
(1947-54), Replaces: 8N1104, NCA1104C (1.985" I.D., 2.684" O.D., 0.322" wide)
NOTE: 2 used per tractor;
Sold individually.
ABC553 $10.99 Front Hub Cap only fits: 9N, 2N, 8N,
FDS295 $29.50
Front Wheel Bearing Kit fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 4-cyl.,
NAA, Jubilee (1939-54) 4000 4-cyl. series, Dexta, Super Dexta
Replaces: CBPN1200A (1939-64) (All w/ regular front axle not
(1.189" inner bearing I.D.) NOTE: Fits H.D. axle), Replaces: 2N1139B, 957E1139
hub 8N1104. 2 used per tractor; Sold (2"-24 thread size, 1.670" tall)
individually. NOTE: Stamped steel. Exact of original.
FDS220 $99.99
Front Wheel (5 Bolt) w/ Large 9-5/8"
Pilot Hole fits: 9N, 2N (1939-47)
Replaces: 9N1015A (3" x 19")
What is back spacing? NOTE: For 4.00 x 19" tires.
To determine back spacing lay your wheel flat on the
ground with the back of the wheel facing up. Lay a straight FDS221 $99.99
edge across the wheel & measure the distance from the Front Wheel (6 Bolt) w/ 4.625" pilot hole
back side of the mounting surface to the straight edge. fits: 8N (1947-52), Replaces: 8N1015A,
(I.E. The wheel pictured has a back spacing of 3-5/8"). C5NN1015A (3" x 19")
NOTE: For 4.00 x 19" tires.
.©
WHS042 $72.95 Front Wheel (6 Lug) w/ (4) Wheel Weight
Front wheels / rims Holes fits: Some 3230 - 7710, others
nc
NOTE: To determine the width of Rims / Wheels: Measure Replaces: 82006576, C5NN1007D
New Holland
the inside (bead to bead) not outside to outside. See pg. 376B. (6" x 15", 4.625" pilot hole, 6" bolt circle,
Ford
,I
FDS071 $53.99 NOTE: For 6.00, 7.50 x 15" tires.
Front Rim (Blank) fits: 9N, 2N, 8N (1939- WHS070 $86.99 Front Wheel (6 Lug) w/ (4) Wheel
52) (3" x 19"; 17-3/8" I.D.) USA made Weight Holes fits: Ford models, Replaces:
ts
NOTE: Remove center from old rim &
Chassis parts
ar
tires. back spacing) USA made NOTE: For 7.50
- 9.5L x 15" tires.
rP
Tires, tubes
to
Tubes are for BIAS ply tires only, not for radial tires. Also not for recreational use.
Need a tire or tube that is not listed? Call our technical service department.
Tires, tubes, valves, nut are sold individually.
ac
WHS047 $95.95 Triple rib, 6 ply, Tire only (5.50 x 16") Licensed by Firestone®
WHS048 $102.95 Triple rib, 4 ply, Tire only (6.00 x 16") USA made
WHS049 $109.95 Triple rib, 6 ply, Tire only (6.50 x 16") Order # Price Description / Size
WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires)
Tire only (4.00 x 19")
FDS089 $68.95 Multi rib, 4 ply, Tire (4 x 19")
WHS054 $143.50 Triple rib, 4 ply,
FDS056TU $15.75 Tube only (For FDS056TI & FDS089 Tire)
in
WHS058 $55.99 Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS056 $297.50 Triple rib, 6 ply,
St
WHS061 $84.50 Rear Tube only (For 13.6, 14.9 x 28" Tires) Tire only (7.50 x 18")
WHS062 $59.99 Rear Tube only (For 9.5 x 32" Tires)
WHS063 $66.95 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires)
WHS064 $65.99 Rear Tube only (For 11.2, 12.4 x 38" Tires)
WHS2513 $89.95 Rear Tube only (For 12.00, 13.00, 13.6, 14.00, 14.9,
15.5 x 38" Tires)
WHS022 $75.50 Front Wheel (6 Lug) w/ (4) Wheel Weight MIS063 $4.25 Rear Rim Bolt Assembly w/ Nut
Holes fits: 8N - 7910 series (1947-91) (For tractors w/ stamped steel center
Replaces: 8N1015D, 82006575, 87389515 dishes) Fits: 28" Rear Rims (1939-90) -
(4.5" x 16", 4.625" pilot hole, 6" bolt circle, WHS004, WHS012, WHS013, WHS016
4" back spacing) USA made applications, Replaces: 370938S36
NOTE: For 5.50, 6.00 x 16" tires. (5/8 x 18 NF x 2-1/2" Carriage bolt)
USA made NOTE: 6 used per rim;
WHS043 $79.99 Front Wheel (6 Lug) w/ (4) Wheel Weight
Sold individually.
Holes fits: Some 2310 - 9700, others
Replaces: 82005056, C5NN1007A MIS121 $0.70 Flat Washer only (For MIS063), Replaces:
(6" x 16", 4.625" pilot hole, 6" bolt circle, 370692S36 (5/8" I.D.) NOTE: Can also
4-3/4" back spacing) USA made be used behind the lug nut on 9N, 2N. 6
.©
NOTE: For 6.50 - 7.50 x 16" tires. used per rim; Sold individually.
nc
New Holland
Inner tube valves, nut Rear rims / wheels - USA made
Ford
NOTE: Sold individually. NOTE: To determine the width of Rims / Wheels: Measure
,I
Order # Price Description / Application the inside (bead to bead) not outside to outside. See pg. 376B.
ABC531 $5.50 Rear Tire Inner Tube Valve (Air / Water Order # Price Description / Application
ts
Internal threads (9" x 28")
Chassis parts
WHS004 $169.99
Rear Rim (6 Loops) fits: Some 9N - 3610
ABC384 $9.99 Rear Tire Inner Tube Valve (Air / Water
ar
(10" x 28") series & others (1939-90)
Valve) (Old style) fits: Tractor tubes w/
WHS016 Replaces: NCA1020C,
External threads WHS012 $174.99
D9NN1050BA
(11" x 28")
rP
ABC385 $1.50 WHS004 Replaces: NCA1020B,
Brass Nut (For Rear Tire Inner Tube Valve) WHS013 $199.99
CONN1050F
NOTE: Sold individually. (12" x 28")
WHS012 Replaces: C5NN1050E
WHS013 Replaces: D9NN1050EA
to
FDS1211 $1.39
(Nut) FDS1211: Replaces: 33806S7, 81871950
(5/8"-18 NF) USA made
in
FDS394 $2.45 Rear Lug Stud fits: 8N, NAA, Jubilee, 501, NOTE: Stop holes are angled.
600, 700, 800, 900, 1801, 2000, 4000 4-cyl.
St
.©
(4140 3-cyl.), 4600SU, 4610SU, 4630, fits: Ford models w/ a Category 2 top link
4830, (5640, 6640, 7740, 7840 all w/ 38" switching to a Category 1 top link pin
tire), (8210 3/1989-91), 8240, (8340 w/ (.750" I.D., 1.000" O.D., 1-15/16" length)
nc
38" tire), 8530, 8630, 8700, 8730, 8830, FDS159 $54.95 Top-Link Bracket (Hydraulic Lift Rocker)
9700, (TW5 - TW35); New Holland:
New Holland
,I
64), Replaces: NCA535A NOTE: Drilled
out rim clamps), Replaces: C7NN1043E,
E5NN1043AA, 5106352, 83954711 for a 1" pivot pin. Measure pivot pin
(3.860" o/a height, 3.353" o/a width, before ordering.
ts
.935" hole dia.) ABC1431 $1.95 3-Point Top Link Pin (Category 1)
Chassis parts
MIS109 $14.99 Rear Spinout Rim Stop (For Parallel (3/4" O.D., 2-3/4" usable length,
ar
Drilled Rim Rail) fits: 2000 3-cyl. - 4830 4-5/8" o/a length)
(1965-94), Replaces: C0NN1057A ABC1427 $3.50 3-Point Top Link Pin (Category 1)
NOTE: Use MIS109 for our spinout rims.
rP
(3/4" O.D., 4-3/4" usable length,
MIS108 $17.99 Rear Spinout Rim Stop (For 90 degree 6-1/2" o/a length)
Drilled Rim Rail) fits: Some 4000 3-cyl. -
ABC1429 $4.50 3-Point Top Link Pin (Category 2)
9700, TS90 - TS115 (1965-2003)
(1" O.D., 4-1/4" usable length,
to
MIS110 $8.99 Stop Bolt (For Rear Spinout Rim Stops) MIS119 $0.95 3-Point Lynch Pin fits: Ford models
ac
fits: 2000 3-cyl.- 4830 (1965-94) equipped w/ a 3-point hitch using a .420"
Replaces: C0NN1058A, 81811263 dia. pin, Replaces: 87299410
(2-5/8" o/a length) USA made (1-1/2" usable length)
Tr
FDS367 $28.95 Fork (For FDS028) fits: 9N, 2N, 8N, NAA,
Jubilee (1939-54), Dexta, Super Dexta
Mounting wedge (1957-64), Replaces: 9N585A
Fits: 8N, NAA, Jubilee, 501; 600, 700, (10-1/2" o/a length, 3/4" UNC thread,
800, 900, 2000, 3000 (1947-74) (All w/ 1/2" between ears)
conventional 6-loop rims not spin out
FDS219 $49.95
rims) LH Leveling Rod fits: 9N, 2N, 8N, NAA,
Jubilee (1939-54), Dexta, Super Dexta
Description Order # Price
(1957-64), Replaces: 9N564B
Mounting Wedge (For Rear 3-pc. Weight)........... FDS150..........$9.50
(20" c.c. pin holes)
NOTE: 6 needed per wheel; Sold individually. Close out.
.©
4000 series 4-cyl. (1954-64) except Row
Jubilee, 541, 600, 700, 800, 900, 1801, 2000,
Crop & Grove NOTE: Mounting bolts
2600, 3000, 3600, 4000 4-cyl. series, Dexta,
sold separately order ABC2271.
Super Dexta (1939-81), Replaces: 9N595
nc
(2-3/4" useable length x 5/8" dia.) ABC435 $55.65
New Holland
USA made
Ford
Clevis w/ Pin fits: Same as FDS208,
FDS206 $57.95
,I
3-Point Lower Lift Arm fits: 9N, 2N, 8N, FDS302, Replaces: NCA803B
NAA, Jubilee (1939-54) Dexta, Super
Dexta (1957-64), Replaces: 9N555, 9N556
ts
(Category 1 accommodates 7/8" drawbar FDS305 $4.90
Chassis parts
or lower link pins, 32" hole centers, 1/2" Clevis Pin w/ Lynch Pin fits: Same as
thick) NOTE: Red primer. Lower lift arm FDS208, FDS302, Replaces: 8N804
ar
w/ forged ball-joint ends. NOTE: Only fits aftermarket bracket.
FDS383 $96.50 3-Point Lower Lift Arm fits: 501, 600, 700, FDS306 $54.99
rP
(LH)
800, 900, 1801, 2000 (3 & 4-cyl.), 2600, Swinging Drawbar fits: Same as FDS208,
FDS386 $96.50 2610, 3000, 3600, 3610, (4000 4-cyl. series) FDS302, Replaces: C0NN805F, 86531346
(RH) (1954-90)
FDS383 Replaces: D0NN555C
to
ABC2271 $8.49
FDS386 Replaces: D0NN555D Swinging Drawbar Bolt Kit fits: 9N - 4000
(Category 1 - accommodates 7/8" series (4-cyl.) (1939-64) NOTE: Includes
ac
drawbar or lower link pins, 31-5/8" c.c. 8 bolts & lock washers. Will fit FDS208,
ball) NOTE: Offset tractors must drill FDS302.
hole for sway chain.
FDS303 $55.95
Tr
FDS304 $62.25
NOTE: Mounts under axle housing.
2 used per tractor; Sold individually. Hanger / Bracket only fits: Same as
FDS302, Replaces: NDA809A
in
FDS465 $29.95
ABC2010 $24.99 Adjustable Stabilizer Bar (For tractors w/
e
3-Point Lower Lift Arm Support Pin w/ Category 1 3-point) (1939-90) Adjustable
Nut, Washer, Cotter Key fits: 9N, 2N from 27-1/2" to 37" length, 23" center tube
St
(1939-47), Replaces: 9N563 length, 7/8" threaded ends, 7/8" pin holes
NOTE: Adjustable ends for desired
length. Normally 2 used per tractor;
Sold individually.
FDS462 $24.95
3-Point Lower Lift Arm Support Pin FDS024 $67.99 Stabilizer Kit fits: 9N, 2N, 8N, NAA,
fits: 8N, NAA, 501, 600, 700, 800, 900, Jubilee, 600, 800, 2000 3-cyl. & 4-cyl., 3000,
1801, (2000 3 & 4-cyl.), 2600, 2610, 3000, 4000 4-cyl. series (1939-74) Category 1
3600, (4000 3 & 4-cyl.), 4600 (1947-83) NOTE: Primed red. Flat bars not
(All w/out differential lock), Replaces: turnbuckles. Kit includes (2) arms, (2)
NCA563C (5.070" length) NOTE: For brackets, pins.
Category 1 3-pt. arms.
Drawbars, parts continue on next page
FDS022 $46.99 Standard Drawbar (Category 1) ABC302 $7.95 Eyelet Assembly Kit w/ Nut & Lock
fits: Ford models, Replaces: 9N5182A Washer (For Sway Chain) fits: 9N, 2N,
(1" x 2-1/2" x 26", 7/8" pin size) 8N, NAA, Jubilee, 501, 600, 700, 800, 900,
Dexta, Super Dexta, 1801, 2000, 3000, 4000
FDS211 $29.99 4-cyl. series (1939-81), Replaces: NCB660A
Drawbar Lock (Category 1) (For FDS022) NOTE: Kit includes eyelet assembly,
Replaces: 9N5182L nut, lock washer.
FDS274 $47.75 Drawbar Check Chain Kit fits: 9N, 2N,
8N, NAA, Jubilee, 501, 600, 700, 800, 900,
ABC1433 $2.15 3-Point Lift Arm Category 2 to a Category Dexta, Super Dexta, 1801, 2000, 2600,
1 3-Point Hitch Reducer Bushing fits: Ford 2610, 3000, 3600, 3610, 4000 4-cyl. series
.©
models w/ a Category 2, 3-point hitch (1939-81) NOTE: Kit includes RH / LH
switching to a Category 1 3-point hitch anchors, (2) eyelets, (2) chains, (4) clevis
(1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) w/ pins, hardware.
nc
New Holland
Ford
Mylar decals
Tips on applying our decals
,I
All decals are mylar unless otherwise
noted. Have the pitted area filled,
ts
All decals are USA made.
Chassis parts / Miscellaneous
ar
installation (usually 3 - 4 weeks). Order # Price Application
Wash area with soap & water (new
paint included) on which decal is to
DEC292 $3.00 Ford Script decal (1-pc. vinyl die cut) (1-3/4" tall x 7" long)
NOTE: Fender decal & misc. equipment.
rP
be placed.
DEC232 $25.99
For mylar decals (film between
lettering): Trim to border of design
10-pc. Complete warning & misc. decals, including hood
where possible prior to removing and fender decals for 9N, 2N, 8N (1939-52)
to
For vinyl cut deals (no film DEC334 $14.50 650 (1954-57)
between lettering) Special order
DEC344 $14.50 660 (1954-57)
St
only:
Peel backing paper from decal. The DEC405 $29.99 661 Workmaster (1957-62)
decal will be stuck to the application
DEC408 $29.99 671 Select-O-Speed (1959-62)
paper. Align the decal using the
design, not the application paper, DEC347 $14.50 740 (1954-57)
and firmly press decal into place. DEC437 $24.99 741 Workmaster (1957-62)
Slowly remove the application paper
starting at one corner. Please note:
DEC410 $19.99 771 Select-O-Speed (1959-62)
The colors are fused into the vinyl DEC444 $45.99 800 (1954-57) NOTE: Does not include Powermaster or
eliminating stacking. CAUTION: Workmaster decal.
Inspect all decal pieces before
DEC335 $14.50 800 (1954-57)
applying to tractor.
.©
DEC393 $25.99 861 Diesel (1958-62)
ABC2362
DEC360 $24.99 861 Powermaster (1957-62)
nc
DEC365 $29.99 871 Select-O-Speed (1959-62)
New Holland
DEC404 $31.99 881 Select-O-Speed (1959-62)
Ford
DEC348 $25.00 901 Powermaster (1957-62)
,I
DEC342 $14.50 960 (1954-57)
DEC361 $24.99 961 Powermaster (1957-62)
ts
ABC2357
DEC364 $25.99 971 Select-O-Speed (1959-62)
Miscellaneous
DEC396 $29.99 981 Select-O-Speed (1959-62)
Deluxe tractor
ar
DEC399 $29.99 961 Diesel (1958-62)
DEC429 $24.99 2000 (1962-64) Hood set only
umbrellas
rP
DEC193 $33.99 2000 3-cyl. (1965-68) Four oil-tempered spring steel
DEC197 $35.95 2000 3-cyl. (1968-74) bows are locked into place
with individual spring clips,
DEC201 $31.25 2600 (1975-81)
providing ease of operation
to
DEC451 $8.99 1-pc. Transmission Shift Pattern decal fits: 2000, 3000, appearance. 54" square cover
4000 series (1965-85); Industrials: 230A - 540A w/ 8 is made of durable polyester
speed transmission & Live PTO, Replaces: C5NN7B292, material. Each corner is double
D3NN7B292B (3-15/16" x 5-1/4") reinforced and has heavy steel
er
ABC2366 • $199.99
St
.©
cuts and save you time!
Order # Price Application A parts manual (reprint
FO4 $31.95 9N, 2N, 8N NOTE: Includes electrical wiring diagram & parts schematic. only) has exploded
nc
NAA views of all parts on the
New Holland
FO19 $31.95
tractor. With numbered
FO20 $31.95 Series 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl.
Ford
,I
NOTE: Includes electrical wiring diagram.
great detail on assembly
FO44 $31.95 1100, 1110, 1200, 1210, 1300, 1310, 1500, 1510, 1700, 1710, 1900, 1910, 2110
and disassembly. It
NOTE: Includes electrical wiring diagram.
ts
also gives you a guide,
Miscellaneous
FO46 $31.95 1120, 1220, 1320, 1520, 1720, 1920, 2120 Compacts
with numbers, for
NOTE: Includes electrical wiring diagram.
ordering parts, and
ar
FO31 $31.95 Series 2000 3-cyl., 3000 3-cyl., 4000 3-cyl. (Covers models prior to 1975) makes you seem much
NOTE: Includes electrical wiring diagram. more informed when
FO41 $31.95 2310, 2600, 2610, 3600, 3610, (4100 1975 & up), 4110 3-cyl., 4600, 4600SU,
rP
talking with a dealer.
(4610, 4610SU both up to 1984) NOTE: Includes electrical wiring diagram Many service manuals,
for gas tractors only w/out cab. after telling you how to
FO43 $31.95 2810, 2910, 3910 disassemble & repair
to
FO47 $31.95 3230, 3430, 3930, 4630, 4830 in detail, will simply
FO42 $31.95 Series 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 say "reassemble". If you
ac
(FMD), Fordson Power Major (FPM), Fordson Super Major (FSM) New a problem. The parts
Performance Fordson Super Major (New FSM), 5000 Super Major, series manual can help you out
6000, Commander 6000, series 1000 & 1600, series 8000, 8600, 8700, 9000, with an exploded view
9600, 9700, TW10, TW20, TW30 of the PTO unit, and you
er
BOK065 • $20.00
e
BOK1313 • $29.95
“I had an issue with a part. The customer service department called
NAA, 501, 600, 700, 800,
me directly and they sent me a new part. Customer service is 900, 1801 (1953-59) gas,
awesome! Very friendly and pleasant... I'll continue using Steiner diesel, LP
Tractor Parts for my restorations.” - David S.
.©
times it includes valuable information as to specifications, torques, etc. A service manual
reprint will offer many short cuts and save you time!
Order # Price Application
nc
BOK061 $15.99 9N, 2N (1939-47) (Operator's manual) NOTE: Includes electrical wiring diagram.
New Holland
BOK063 $18.00 9N, 2N (1939-47) (Service manual) NOTE: Includes electrical wiring diagram.
Ford
REP1446 $18.95 9N, 2N (1939-47) (Owners Product Information Manual) NOTE: This manual explains
,I
basic tractor operation, Ferguson system, 21 different Ferguson implements &
accessories.
ts
BOK040 $15.99 8N (1947-52) (Operator's manual) NOTE: Includes electrical wiring diagram.
Miscellaneous
BOK064 $15.00 8N (1947-52) (Service manual) NOTE: Has very limited information on engine service.
ar
BOK062 $15.00 NAA (1953-54) (Operator's manual)
REP1142 $15.99 NAA, Jubilee (1953-54) (Service manual)
REP1681 $15.99 600 series, 800 series gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's manual)
rP
REP1679 $15.99 601 series, 801 series gas, LP w/ 4 or 5 speed transmission (1958-62) (Operator's manual)
REP3786 $44.39 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881 (1957-62)
(Operator's Manual) NOTE: Covers gas, diesel 4 speed, 5 speed, 10 speed Select-O-
to
Speed transmissions.
REP1685 $14.99 700, 740, 900, 950, 960 gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's
ac
manual)
REP1683 $15.99 701 series, 901 series (1957-62) gas, LP w/ 4 speed or Select-o-speed transmission
(Operator's manual)
Tr
REP1146 $24.50 600, 601, 700, 701, 800, 801, 900, 901, 1801 series (1955-60) gas, LP, diesel (Service manual)
NOTE: Includes electrical wiring diagram.
REP1369 $14.95 2000 3-cyl., 3000, 4000 3-cyl., 5000 (1965-75) All Purpose & LCG gas, diesel (Operator's
er
manual)
REP1139 $16.99 Fordson Major (1952-58) (Service manual)
REP1342 $42.90 Ford/Dearborn Farm Equipment (Beginning in 1939) (Operator's manual)
in
NOTE: This manual contains almost 900 pages of assembly, operations, part numbers,
and maintenance!
e