Professional Documents
Culture Documents
Danfoss TP4000
Danfoss TP4000
TP4000 Range
Electronic Programmable Room Thermostat
Certification Mark
Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other
printed material. All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 TP4000
Thank you for Buying a Danfoss Product GB
Danfoss Heating 3
User Instructions
TP4000 Range
GB Electronic Programmable Room Thermostat
FR
ES
NL
GR
PL Index
1.0 Basics
CZ 1.1 Your programmable room thermostat.......................................6
1.2 Preset Programmes ...........................................................................6
TR 1.3 Before you start...................................................................................6
1.4 Setting the Clock ................................................................................7
1.5 Running your programme ..............................................................7
HR 2.0 Advanced
2.1 Before you change the preset programmes ............................7
RO 2.2 Changing the preset programmes ..............................................8
2.3 Running your programme ..............................................................8
2.4 User Overrides .....................................................................................9
HU 2.5 Altering display to show time or room temperature ............8
2.6 To temporarily alter current programmed temperature ........9
LT 2.7 Frost Protection and Thermostat Mode .....................................9
2.8 Toggle between 12 hour and 24 hour clock ............................9
2.9 Toggle between °C and °F scaling............................................. 10
3.0 Battery Replacement ............................................................................ 10
4.0 Resetting the unit................................................................................... 10
4 TP4000
What is a programmable room thermostat? GB
... an explanation for householders
A programmable room thermostat is both a programmer and a room thermostat. A
programmer allows you to set ‘On’ and ‘Off ’ time periods to suit your own lifestyle. A FR
room thermostat works by sensing the air temperature, switching on the heating when
the air temperature falls below the thermostat setting, and switching it off once this set
temperature has been reached. ES
So, a programmable room thermostat lets you choose what times you want the
heating to be on, and what temperature it should reach while it is on. It will allow you
to select different temperatures in your home at different times of the day (and days of
NL
the week) to meet your particular needs.
Turning a programmable room thermostat to a higher setting will not make the room GR
heat up any faster. How quickly the room heats up depends on the design of the
heating system, for example, the size of boiler and radiators.
Neither does the setting affect how quickly the room cools down. Turning a PL
programmable room thermostat to a lower setting will result in the room being
controlled at a lower temperature, and saves energy.
The way to set and use your programmable room thermostat is to find the lowest CZ
temperature settings that you are comfortable with at the different times you have
chosen, and then leave it alone to do its job. The best way to do this is to set low
temperatures first, say 18°C, and then turn them up by one degree each day until TR
you are comfortable with the temperatures. You won’t have to adjust the thermostat
further. Any adjustments above these settings will waste energy and cost you more
money.
HR
If your heating system is a boiler with radiators, there will usually be only one
programmable room thermostat to control the whole house. But you can have
different temperatures in individual rooms by installing thermostatic radiator valves
RO
(TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature
that is reasonable for the whole ho use. If you do have TRVs, you can choose a slightly HU
higher setting to make sure that even the coldest room is comfortable, then prevent
any overheating in other rooms by adjusting the TRVs.
The time on the programmer must be correct. Some types have to be adjusted in spring LT
and autumn at the changes between Greenwich Mean Time and British Summer Time.
You may be able to temporarily adjust the heating programme, for example, ‘Override’,
‘Advance’ or ‘Boost’. These are explained in the manufacturer’s instructions.
Programmable room thermostats need a free flow of air to sense the temperature, so
they must not be covered by curtains or blocked by furniture. Nearby electric fires,
televisions, wall or table lamps may prevent the thermostat from working properly.
Danfoss
Danfoss
Heating
Heating 5
1.0 Basics
1.1 Your programmable room thermostat
6 TP4000
1.4 Setting the Clock
NL
1.5 Running your programme
GR
If you are happy to use the preset programmes
on page 6, you don’t need to do anything else.
PL
Your unit is now in RUN mode.
CZ
2.0 Advanced TR
2.1 Before you change the preset programmes
Please Note HR
The unit must be programmed in sequence. Event times cannot
be programmed out of sequence. RO
If you want to leave a preset time as it is, simply press PROG to
move on to the next setting. HU
Danfoss Heating 7
2.2 Changing the preset programmes
a) Press PROG until 1st pre-set time and
temperature appears in display.
b) Use + or – buttons to adjust the TIME
GB (press and hold to change in 10 min
increments).
c) Use Λ or V buttons to adjust the
FR TEMPERATURE.
d) Press PROG to move to next preset time &
ES temperature (Event 2).
e) Repeat steps b, c & d for programming
NL Events 3, 4, 5 & 6.
PL
2.3 Running your programme
CZ
Press PROG – the colon in the LCD display
TR will start to flash. The heating will now be
controlled with the programmed times and
temperatures.
HR
2.4 User Overrides
RO
Sometimes you may need to change the way you use your heating
HU temporarily, e.g. due to unusually cold weather. The TP4000 has several
user overrides, which can be selected without affecting the thermostat
programming.
LT
8 TP4000
2.5 Altering display to show either time or
actual room temperature
· Press + and – together to change between
settings.
GB
2.6 To temporarily alter the current programmed FR
temperature
ES
· Press Λ or V until required temperature is
displayed.
NL
(This override will automatically cancel at
beginning of next programmed event). GR
NL When changing batteries, remove old batteries and insert new ones
within one minute and programming will not be lost.
!
PL NB. If the display ever goes blank during normal operation, the
batteries will need to be renewed, the unit reset and the time
reprogrammed. The event times and temperatures will be retained.
CZ
4.0 Resetting the unit
TR
Partial reset: Press RESET (used to restart micro-computer) if display
HR freezes for any reason. This does not reset any programme, clock or
date. It is recommended that this is done at time of installation.
RO
User full reset: Press RESET whilst holding down PROG button. This
resets event times and and temperatures back to the factory presets.
HU The unit must be re-programmed. The correct time will be retained.
LT
10 TP4000
Danfoss Randall Ltd.
Ampthill Road
Bedford MK42 9ER