Professional Documents
Culture Documents
Ro-Flo Brochure
Ro-Flo Brochure
The information contained herein is general in nature and is not intended for specific construction, installation or application
purposes. Ro-Flo Compressors, LLC reserves the right to make changes in specifications shown herein or add improvements at any
time without notice or obligation.
1008432_RoFlo_Brochure_Layout 1 7/11/11 10:06 AM Page 2
parts are the bearings, blades and seals, replaced without removing compressor from the system. Quality high- Detail view of dual, oil- special features not found in
mulTiplE pRESSuRES: Available in low- and high-pressure performance Seals buffered seal rings which other bearings:
maintenance costs are minimal. When prevent contamination in ■ Special cage material for
configurations. ■ Ro-Flo® custom-engineered shaft corrosive, dirty gas
routine maintenance is required, the seals are crafted to perform
corrosion resistance.
simplicity of the Ro-Flo® design makes REliAblE pERFORmAnCE: Pressures to 150 psig and flows to consistently under the dirtiest and
applications by
■ Custom-designed internal
effectively isolating the
this process easy, on-site, without 2500 acfm (3600 Mscfd) with a ±5% guarantee on most corrosive conditions. “Double bearing and seal areas
clearances for high
removing the compressor from the system. performance. bellows” zero-leakage shaft seals are from the process gas.
temperature operation.
COnSTAnT EFFiCiEnCy: Centrifugal force keeps blades in available. Single face mechanical ■ We use 400 Series roller
seals are fully field-rebuildable. bearings with higher load
contact with cylinder as they wear.
■ Balanced design and proper selection capacity than standard 300
lARGE TuRnDOwn CApAbiliTy: Compressors can be operated of seal face materials minimize heat Series bearings.
at 40% of maximum speed to facilitate variable flow build-up and maximize seal life.
applications.
1008432_RoFlo_Brochure_Layout 1 7/11/11 10:06 AM Page 2
parts are the bearings, blades and seals, replaced without removing compressor from the system. Quality high- Detail view of dual, oil- special features not found in
mulTiplE pRESSuRES: Available in low- and high-pressure performance Seals buffered seal rings which other bearings:
maintenance costs are minimal. When prevent contamination in ■ Special cage material for
configurations. ■ Ro-Flo® custom-engineered shaft corrosive, dirty gas
routine maintenance is required, the seals are crafted to perform
corrosion resistance.
simplicity of the Ro-Flo® design makes REliAblE pERFORmAnCE: Pressures to 150 psig and flows to consistently under the dirtiest and
applications by
■ Custom-designed internal
effectively isolating the
this process easy, on-site, without 2500 acfm (3600 Mscfd) with a ±5% guarantee on most corrosive conditions. “Double bearing and seal areas
clearances for high
removing the compressor from the system. performance. bellows” zero-leakage shaft seals are from the process gas.
temperature operation.
COnSTAnT EFFiCiEnCy: Centrifugal force keeps blades in available. Single face mechanical ■ We use 400 Series roller
seals are fully field-rebuildable. bearings with higher load
contact with cylinder as they wear.
■ Balanced design and proper selection capacity than standard 300
lARGE TuRnDOwn CApAbiliTy: Compressors can be operated of seal face materials minimize heat Series bearings.
at 40% of maximum speed to facilitate variable flow build-up and maximize seal life.
applications.
1008432_RoFlo_Brochure_Layout 1 7/11/11 10:06 AM Page 1
The information contained herein is general in nature and is not intended for specific construction, installation or application
purposes. Ro-Flo Compressors, LLC reserves the right to make changes in specifications shown herein or add improvements at any
time without notice or obligation.