Professional Documents
Culture Documents
Barriere Levante Industrielle
Barriere Levante Industrielle
Barriere Levante Industrielle
door door
door
door
door
door
door door
Datasheet BL46-FT-EN-06
Datasheet BL46-FT-EN-06
- Zinc-coated internal mechanical parts. 1. Automatic opening of the arm during power cuts.
(a)
- Complete body (housing, base plate, cover and 2. Locking of the arm in opened and/or closed position .
The reaction in case of power leakage (locked or not) must be
doors): zinc dusting + orange epoxy structured paint specified when ordering.
RAL2000. 3. Standard tip support.
Total thickness of the surface treatment exceeds 160 4. Adjustable tip support.
µm. 5. Anti-vandalism tip support.
(b)
6. Electro-magnetic tip support .
(b)
7. Electrically lockable tip support .
Standard technical specifications 8. Folding fence support.
9. Traffic lights (LED).
10. Traffic lights (LED) fixed on a post on housing.
- Electrical power supplySingle-phase 230VAC, 11. Support post for traffic lights.
50/60Hz. 12. Push-button box.
(not to be connected to a floating network or to high impedance 13. Lockable switch on housing.
earthed industrial distribution network) 14. Radio transmitter/receiver.
- Nominal Power: 450 W. 15. Detection loop.
- Three-phase 250 W asynchronous motor. 16. Presence detector for inductive loops.
- Reversible ring and pinion speed reducer, service 17. Photoelectric cell for opening, closing or automatically stop
factor 1.2. the barrier arm..
18. Cell support post.
- Useful arm length (L): 3 to 7 m, in increments of 19. AS1321 Entrance/Exit extension board CAN.
0.5 m. 20. AS1049 board for third-party traffic signs.
- Operation not hampered by 120 km/h winds. 21. Thermostatic 250 or 500 W heating for operation to -25 or -
- Ambient operating temperature between -20 and 45°C.
+50°C. 22. Raised base.
23. Paint of another RAL colour.
- Tolerated relative humidity: 95% without 24. Treatment for aggressive saline environment.
condensation. (recommended when the barrier is installed within 10 km of the
- Minimum opening/closing time: 3,5 s (adjustable coast and may be subject to salt attack): sandblasting + Alu Zinc
through the control board). plating 80μm outside (40μm inside) + polyzinc 80μm + 80μm
powder paint.
- Net weight (without arm): 250 kg. 25. Climb-proof section on folding fence (crest).
- MCBF (Mean Cycle Between Failure), in compliance 26. LEDs on arm.
with recommended maintenance: 1,250,000 cycles. 27. STOP sign with a diameter of 300 mm.
- IP44 28. 120 VAC - 60 Hz power supply.
- EC compliant. 29. Anti-vandalism belt, preventing the opening of doors and
hood.
30. Extension of the fence over the barrier housing.
31. Double limit switches for information on BL status in the
event of power failure.
32. LED flashing light on cover for arm movement
signalisation.
33. Rotating base with breaker block in case of impact and
report of housing position by dry contact.
(a) (b)
mutually incompatible options.
Standard dimensions (mm)