Professional Documents
Culture Documents
Cem 603
Cem 603
1. Determine the moment of resistance of a singly reinforced beam 160 mm wide and
300 mm wide deep to the centre of reinforcement. If the stresses in concrete and steel
are not to exceed 5 N/mm2 and 140 N/mm2 respectively. The reinforcement consists
of 4 bars of 16 mm diameter. Take m = 18. If the above beam is used over an
effective span of 5 m. Find the maximum load the beam can carry, inclusive its own
weight.
OR
2. Design a reinforced rectangular beam to resist a bending moment of 200 kN-m. The
width of the beam is to be kept 450 mm. Use M20 concrete and Fe415 steel. 10
4. An R.C.C beam of size 350 x 700 mm overall depth. M20 and Fe 415 steel is used.
Calculate area of steel required for a bending moment of 200 kN-m. Calculate
Moment of reistance of the balanced section and area of steel required for the same.
10