Professional Documents
Culture Documents
VEIT CasualWear Finish 01-0415
VEIT CasualWear Finish 01-0415
VEIT CasualWear Finish 01-0415
and Finish
Table of Contents
2
VEIT 8410 VEIT 8363 Basic
The VEIT 8410 Polo Shirt Finisher is perfect for finishing all Both models Basic and Classic allow finishing of
types of sweatshirts, polo shirts, T-shirts and knitwear outer wear in all current sizes with a back length of
(long-sleeved and short-sleeved). The finishing technology with 620 to 1420 mm / 24 to 56 inch (or 820 to 1620 mm / 32 to
steam and air avoids shine or marks on the garment surface. 63 inch with an adapter) and hem sizes from 940 to 1660
HANDBÜGELTECHNIK
mm / 37 to 65 inch.
› High Productivity output increases by up to 300 % - 75-120
CASUAL WEAR
CASUAL WEAR
shirts per hour with machine finish, instead of 25 shirts per › Good value for money
hour with hand-ironing › High performance (up to 80 pcs/h)
› With the adjustable buck, the size of the polo shirt can be › The easy handling of the finisher will allow you to exactly set
adjusted exactly to the mockup-size, therefore the result all parameters. You can fine-tune them perfectly to the
ensures a total size accuracy requirements of the garments to be finished
› Quality control and Finish in one step › Adjustable shoulder width from
› Even unskilled operators can handle the machine easily 12.6 to 20.5 inch / 320 to 520 mm
› The automatic seam clamping saves time when placing the › The bust can be pneumatically height-adjusted and is adapted
garment to the size of the garment through the operating panel.
› Powerful but energy saving blower motor with electronically
adjustable air quantity for all fabrics
› The integrated stretching device lifts the bust during
the steaming process (adjustable) and improves the
finishing quality
› Removable lapel clamp (standard)
› For sensitive fabrics, just switch off the lateral tensioners as
well as the front and back clamps
Blouse Finisher
› The newly engineered control panel focuses on
› Good value for money user-friendliness and simplicity.
› High performance (up to 80 pcs/h) › Front and back clamps, side tensioners and retensioning
› Two Blouse Finishers can be operated in tandem by a single function can be switched on/off easily
operator. Productivity increases by 50 % with a single operator › The air volume can be electronically adjusted with the
› Powerful but energy saving blower motor with manually control panel.
adjustable air quantity for all fabrics
› Adjustable shoulder width from 12.6 to 20.5 inch /
320 to 520 mm
› 360° rotatable: for easy loading and best view on the garment
› Adjustable sleeve clamps allow an easy setting of the correct
sleeve position
› Automatically adjusting hem tensioners allow the finish
of blouses with waists
› Flaps in the front and back hold the blouse in the correct
position
› Manual stretching in vertical as well as horizontal direction
is possible if needed
4 5
VEIT 8363 Classic VEIT 8308 Basic
NEW Multiform Finisher Form Finisher
Both models Basic and Classic allow finishing of outer wear › Good value for money
in all current sizes with a back lenght of 620 to 1420 mm › High performance (up to 100 pcs./h)
/ 24 to 56 inch (or 820 to 1620 mm / 32 to 63 inch with › Microprocessor control allows precise repetition of
an adapter) and hem sizes from 940 to 1660 mm/ 37 to 65 program sequences
inch. In addition, the VEIT 8363 Multform Finisher offers › Extremely powerful blower with adjustable air quantity for
further functions: all fabrics, from extremely light-weight to very heavy ones
CASUAL WEAR
CASUAL WEAR
› Special steaming dome including built-in drier ensures
› High performance (up to 80 pcs/h) consistent steam quality
› Powerful but energy saving blower motor with stepless › Two Form Finishers can be operated in tandem by a single
adjustable air quantity via touch display operator in a very small area, increasing productivity
› The VEIT 8363 Classic version will also finish difficult- by approx. 50 %
to-handle garments in top quality and it also offers many › The apparel forms are continuously adjustable in length (47.2
extra benefits: to 61.0 inch / 1200 to 1550 mm) and shoulder width (10.6
› Height adjustment of the bust is performed by an to 17.7 inch / 270 to 450 mm). The sleeve openings can be
electrical tooth belt drive: This allows a very precise closed easily with a zipper
tensioning of the garment without deforming it › The forms, rotatable by 360°, can be exchanged very quickly
› Automatic height positioning of the bust by a photocell
› The standard pneumatically operated side-vent clamps allow
finishing of jackets and blazers in perfect quality
› The rotating bust facilitates loading
› The new VEITouch Control Unit is easy to operate and can
create and store up to 10 programs
› Adjustable shoulder width from 12.6 to 20.5 inch /
320 to 520 mm
› The standard lapel clamp can be taken off
Long parts: dresses, overcoats, aprons, bath robes Jackets, blouses, pullovers, leisure wear
Pneumatic side-vent clamps can be additionally In addition to classic garments, many other textiles can be finished,
switched on for easy mark-free finishing of jackets with such as sports gear, jeans jackets and coats.
side vents.
6 7
VEIT 8741 Basic
Pants Finisher Basic The Basic version is suitable for pants with no or very little
stretch material in the fabric. With mechanic waistband brake
Stretch material –
› Patented electromotive carriage drive of the hem clamping and mechanic brake for the leg length,which avoids overstre-
Very thick fabric +
device. Highly precise stretch control function (optionally ching when set correctly. Only long trousers can be finished, no
Size accuracy o
with VEIT-O-STRETCH or anti-stretch leg) ensures shorts!
damage-free finishing of even sensitive stretch fabrics Stretch-to-size o › Base module
› Loading height is easily adjustable in three steps using foot Shorts – › Waistband tensioning system “Body”
pedal (with option short trousers package) Elastic waistband + › Hem clamp system “Manual”
CASUAL WEAR
CASUAL WEAR
› Smooth and steady running of carriage significantly improves › Fan with 550 W, electronically adjustable 0-100 %
the finish quality › Mechanic waistband brake
› Waistband tensioning system “Body” tensions › Mechanic brake for the leg length
trousers two-dimensionally in a semi-circle to improve finish
quality even further Medium
› Patented waistband tensioning devices for long lifetime free of
wear and tear The Medium version is ideal for pants with little stretch material
› The modular system allows a combination of the base unit Medium in the fabric. Additionally to the Basic version, the Medium
with longitudinal or lateral waistband tensioning and Stretch material o version has an anti-stretch function for the legs.
many other options Very thick fabric + Furthermore it allows the finish of short trousers.
› Waistband size from 19–56 inch / 480–1430mm Like Basic version, additionally:
Size accuracy +
› Hem clamp system “manual” incl. inside leg tensioners
Stretch-to-size o
Belt drive for the hem clamps: › Short trousers package
Shorts ++
By using an electric motor instead of an air cylinder, VEIT Pants › Air pressure separately adjustable for waistband and
Elastic waistband +
Finishers are much more precise than any other Pants leg hem clamps
Finisher on the market. This is very important for sensitive › Anti-stretch function for the legs
garments as the system will stop immediately as soon as the
pre-set tensioning level is reached. After the hem clamps have
stopped, they can either move upwards again a little, or can
move downwards to further stretch the garment in order to avoid High
shrinkage.
Max. leg length (waistband-hem): 47 inch / 1200 mm. High The High version is suitable for all pants even with a lot of
Stretch material ++ stretch material in the fabric. The VEIT-O-STRETCH package
Waistband tensioning system "Body": Very thick fabric ++ avoids any overstretching of the pants by combining a pneumatic
The unique semicircular VEIT waistband tensioning system waistband brake with an anti-stretch function for the leg. From
Size accuracy ++
“Body” forms the pants’ waistband according to the shape Jeans to very delicate stretch fabrics – this version can handle
Stretch-to-size ++
of the human body. Unlike other pants finishers which extend them all!
Shorts ++
the waistband only sideways, VEIT’s waistband tensioning Like Medium version, additionally:
system “Body” also extends the pants’ waistband to the back, Elastic waistband + › Fan with 750 W, electronically adjustable 0 - 100 %
giving the pants a complete finish in the upper part of the › Steam re-heater
trousers. › VEIT-O-STRETCH incl. pneumatic waistband brake, anti-stretch
and re-stretching function for the legs as well as
VEIT-O-STRETCH: stretch-to-size function
The VEIT-O-STRETCH package is the most elaborate anti-stretch › Program package: create and store up to 10 programs
1 2 function available on the market. It allows trouble-free proces-
sing of even the most delicate stretch fabrics.
It contains:
Top
1 Waistband brake:
The waistband tensioning system is locked during the finishing The Top version is ideal for all pants even with a lot of stretch
process, so there is no pressure on the waistband. Therefore, the Top material in the fabric. As an extra to the High version, the
waistband will not be stretched during the steaming cycle (can Top version contains lateral waistband clamps which hold the
Stretch material ++
be switched on/off). waistband neatly in place during the finish process at the side
Very thick fabric ++
3 and at the back.
Size accuracy ++
2 Stretch-Control for leg length: Especially good for pants with elastic waistbands or pants that
Stretch-to-size ++
This function prevents unwanted extension of the legs by moving shall be stretched a lot.
the hem clamps upwards as soon as a force on the hem clamps Shorts ++ Like High version, additionally:
is detected. Elastic waistband ++ › Lateral waistband clamps at sides and at the back
› Hem clamp system with light sensors for higher productivity
3 Re-stretching for leg length:
An intentional and controlled overstretching of the pants’ leg can
be achieved with the adjustable Re-stretching function.
– = not possible / not recommended o = possible, but not recommended + = good ++ = very good
8 9
BRI-231 SC
Tunnel Finisher
upper and lower buck
› Automatical blowing with head buck distance
Options:
› Trouser waistband clamp and stretching device:
for improved handling
› Quick height adjustment system for waistband, lateral
and stretching function: Stretching distance can be
adjusted to suit different styles and fabrics
› Blowing via switch rail (suction via switch rail is standard)
BRI-2001 SC
Options:
› Lower buck steam via pedal:
As pre-steaming option and for pressing velvet fabrics
› Lower blowing blowing:
For finishing velvet fabrics
10
Consistent finishing quality
for any material
Thanks to the adjustable level of
humidity in the spraying steam. High blowing power
The new generation of blowers is
highly efficient and energy-saving,
with minimum noise emission.
TUNNEL FINISHER
TUNNEL FINISHER
Safe transport of the goods Clearly separated processes Optimized finishing result
with the conveyor and the With roller unit between The extended air module
VEIT hook system. preconditioning and finish. increases performance.
No condensate at conveyor
Suction at the entry prevents
the formation of drops or stains
on the garment.
Maintenance-free chain
tensioning system
The pneumatic transport
hook system is nearly free
from wear and tear.
Finishing process visualized Lower part of steam unit can Adjustable separation between
The modern touch display can be be switched off when finishing steam and air module Impressive steam doll effect
flexibly positioned. basic garments Avoids marks on the goods during The high-volume exit module adds
Yet another energy-saving feature. the finishing process. extra volume to the garment.
15
Cotton Care Module Steam Module
TUNNEL FINISHER
TUNNEL FINISHER
Efficient preconditioning of natural fibres with water spraying technology Adjustable and consistent steam quality for reliable finishing performance
With its Cotton Care module, the VEIT 8657 Tunnel Finisher achieves unrivaled finishing results, VEIT sets standards in steam application: With the even spraying and the adjustable level of humidity,
even for difficult-to-process natural fibres. a consistent, effective finishing result can be achieved for all kinds of textiles.
The decisive factor for this stunning finishing quality is the high-pressure The correct level of humidity in the steam spray is decisive for the finishing
water spraying technology. The micro-fine nebulization allows the water to quality of the garment. With the steam module in VEIT’s 8657 Tunnel Finisher, it
permeate into the fibre and makes it swell. The effect is amazing: Even hard can be individually adjusted: wet steam for natural fibres, dry steam for synthetic
creases, e. g. in linen garments or jeans, disappear. The unwelcome wash- fibres. Thus, customers can be sure to get an excellent effect for any type of
effect is also avoided. material.
16 17
Air Module Exit Module
TUNNEL FINISHER
TUNNEL FINISHER
Consistent, energy-efficient drying and smoothing Stunning steam doll effect makes good finishing perfect
A reliable and effective air module is a decisive factor in achieving a maximum of crease elimination. In the exit module, the smoothened goods are brought to volume. So the top-quality finishing result
To this effect, VEIT has equipped its Tunnel Finisher 8657 with a particularly powerful blower. meets the eye even more.
The high performance of the generation of blowers is most obvious with high A particularly good effect of the elaborate air flow through the exit module
pass-through speeds. The dimensions of the inner tunnel with a height of 180 can be achieved even with dense and padded garments. In order to get a
cm / 70.8 inch and a length extended to 125 cm / 49.2 inch allow an steam doll effect, the garment is blown simultaneously from the top
excellent finishing quality even for long textiles. and from the bottom to receive its voluminous finishing touch.
Optimized air circulation, perfect finishing The height of the exit module can be automatically adjusted to meet
Air deflection, based on the wind tunnel principle, reduces flow losses to a the length of the textile. This guarantees a maximum steam doll effect in
minimum. Air circulation is channeled to the purpose of drying and smoothing all cases.
the steamed goods as gently yet effectively as possible. Thanks to the
efficient blower technology, the entire Tunnel Finisher needs much less
energy. This effect is supported even further by the recycling of warm air in
the circulating air modules.
18 19
Touch Screen Transport Hook System
TUNNEL FINISHER
TUNNEL FINISHER
Centralised control through the user-friendly operating unit Safe and easy transport with a system
Easy operating, service-oriented maintenance: The touch screen in the operating unit The transport hook system in our VEIT 8657 Tunnel Finisher ensures smooth and careful transport of the garments
allows the control of any module of the VEIT 8657 Tunnel Finisher. through the Tunnel Finisher. And even better: It offers a wide variety of loading options.
The control systems of the individual modules are connected The improved Conveyor System is driven by a maintenance-
with the control unit through a BUS cable. Its user-friendly free chain system. The transport chain is guided in soft
surface allows fast access to all important functions and curves through sliding guides rather than via sprocket wheels.
parameter setting of each module. In addition, programs can This method allows the system to work reliably with minimum
be stored and retrieved when necessary. maintenance.
Ethernet Tunnel Finisher Loading is extremely flexible and adjustable to the type,
size and volume of the garment:
› For light goods, each hook can be loaded
› For more voluminous material, every second, third
or fourth hook is needed
› For easy-to-finish garments, two pieces may be loaded to
one hook in order to save energy
20 21
Maintenance and Service Your Benefits
TUNNEL FINISHER
TUNNEL FINISHER
Fast and easy via online-platform VEIT 8657 Tunnel Finisher: high performance, low energy-consumption
For the Tunnel Finisher 8657, VEIT offers online support as an optional service. Your benefit: short reaction times in the event of Even better finishing quality with significantly less energy needed: The VEIT Tunnel Finisher generation
malfunctioning or production standstills. Also, processes can be addressed directly at any time. sets standards in efficiency thanks to a whole bundle of technological innovations.
For online maintenance and service, VEIT offers a contract to its customers. Their Tunnel VEIT 8657 Module l / h kg / h kg / h kg / h parts / h parts / h
Finisher will then be connected via the online service platform with VEIT’s service unit. Thus, Type 1+1+2 - 165 265 - 900 -
any due maintenance, updates or error analyses can be performed quickly through the platform. Type C+1+2 (Cotton Care) 20 – 40 140 220 30–50 1000 700
Also, customers can access and supervise their own production processes through the online
service platform. Wherever and whenever they want.
Connected Load 8656 vs. 8657 Steam savings with Cotton Care
Individual consulting, customized solutions Anschlussleistung 8656 vs. 8657 Dampfeinsparung durch Cotton Care
24 760
VEIT experts will support you in finding best solutions, and to advise you in person on planning 23
23
745
745
22
and implementing your individual maintenance contract. Please contact us! 680
24 %
20 8
Dampfverbrauch
50% 520
50 %
Connected Load (kW)
16
31 %
Anschlussleistung (kW)
14 14
14 53% 440 8657 ohne Cotton Care
53 %
395
395
12
11,5
11,5 8657 360
10 % 8657 mit Cotton Care
11
11 43%
10 43 % 8656
9 280 16 % 255
8 88 50% 8 9,0 255
50 % 8,0 230
200 230
6 46%
46 % 165
5,5 165
5,5 140
4 4,3
4,3 120 140
2
C+1+2 Tunnel size C+2+3
C+2+2 C+4+4
C+1+2
1+1+2 C+2+2
1+2+2 C+2+3*
1+3+3 C+3+4*
1+4+4
0 Tunnelgröße
1+1
1+1 1+2
1+2 2+3
2+3 1+3+3
1+3+3 1+4+4
1+4+4 1+1+2 1+2+2 1+3+3 1+4+4
Tunnelgröße
1 Tunnel size
8656 8657 with Cotton Care (*comparable version / see technical data)
TUNNEL FINISHER
The VEIT 8657 Tunnel Finisher is based on a modular system to allow a wide variety of individual solutions.
Requirements or applications have changed? No problem at all. Upgrading or extending a tunnel is easy.
Individual tunnel solutions can be implemented according to application, capacity and type of product that needs to be finished.
For whatever combination is chosen, there is one common principle: The longer the tunnel, the faster the throughput of goods.
VEIT experts are happy to individually discuss the most economical solution for any requirements.
Modules:
1 x pre-heating module
+ 4 x steam modules
+ 4 x air modules
Modules:
1 x Cotton Care
+ 1 x steam module
+ 2 x air modules
Modules:
Cotton Care
+ 5 x steam modules
+ 5 x air modules
Modules:
1 x pre-heating module We have the perfect solution for your requirements –
+ 3 x steam modules from laundry shops to logistics centres.
+ 3 x air modules Just contact us!
24 25
Casual Wear Tunnel Finisher
Connections Standard models C+1+2 C+2+2 C+2+3 C+3+4 1+2 1+2+2 1+3+3 1+4+4
Type Page Capacity / hour Steam Condensate Suction Compressed Blowing Voltage Average capacity pc / hr 1000 1500 1600 2200 1000 1400 1500 2000
pieces 5–7,5 bar max. 0,5 bar min. 120 mbar air 6 bar D=12mm Volt / kW
3/8" 3/8" 11/2" D=8mm Air volume m3/hr 13000 10500 10500 26000 13000 19500 26000 32500
(passage width 260 mm) (15600) (23400) (23400) (31200) (15600) (23400) (31200) (39000)
Polo Shirt Finisher 8410 6 mm / 200 – 240 V / 0,92 kW/
TECHNICAL DATA
TECHNICAL DATA
4 75 – 120 1 / 2" 1 / 2" – – Average steam consumption 1) kg/hr 140 230 255 370 140 255 370 485
1 / 4" 50 / 60 Hz
Blouses Finisher 8430 200 – 240 V / 1,3 kW/ Average water consumption l / hr 50 50 50 50 – – – –
4 60 – 80 1 / 2" 1 / 2" – – –
50 / 60 Hz
Electrical load 2) kW 7,7 7,7 8,4 10,9 6,7 8 9 11,5
Multiform 8363 6 mm / 200 – 240 V / 1,5 kW/
5 60 – 80 1 / 2" 1 / 2" – – Dimensions and Weight
Basic 1 / 4" 50 / 60 Hz
Multiform 8363 6 mm / 200 – 240 V / 1,5 kW/ mm/ 7035 /9735 8035/10735 10295/12995 10295/12995 7065 /9735 6625 /9325 8885 /11585 11145 /13845
6 60 – 80 1 / 2" 1 / 2" – – Length with/ without Conveyor
Classic 1 / 4" 50 / 60 Hz in 277/383 316/422 405/511 405/511 278/383 260/367 349/456 456/545
Formfinisher 8308 6 mm / 400 V / 2,2 kW / Height - min. (+ 150 mm / mm/ 2780 (10)/ 2780 (10)/ 2780 (10)/ 2780 (10)/ 2780 (10)/ 2780 (10)/ 2780 (10)/ 2780 (10)/
7 60 – 100 1 / 2" 1 / 2" – –
Basic 1 / 4" 50/60 Hz 6 in adjustable range) in 109 (0,4) 109 (0,4) 109 (0,4) 109 (0,4) 109 (0,4) 109 (0,4) 109 (0,4) 109 (0,4)
Pants Finisher 8741 6 mm / Width (conveyor on door side) mm/in 1650/65 1650/65 1650/65 1650/65 1650/65 1650/65 1650/65 1650/65
8 – 9 80 – 120 1 / 2" 1 / 2" – – –
1 / 4"
Width (conveyor on control side) mm/in 1200/47 1200/47 1200/47 1200/47 1200/47 1200/47 1200/47 1200/47
BRI-231 SC 230 – 240 V / 0,15 kW/
10 40 – 60 3 / 8" 3 / 8" 1 1/2" D = 8 mm 1 Option Net Weight kg /lb 2650/5842 3000/6613 3400/7496 4500/9920 1900/4189 2700/5952 3600/7936 4600/10141
50 – 60 Hz
BRI-2001 SC 230 – 240 V / Equipment
10 40 – 60 1 / 2" 3 / 8" 2" D =12 mm –
0,15 kW/ 50 – 60 Hz
Conveyor height mm/in – – – – 1810 / 72 1810 / 72 1810 / 72 1810 / 72
Entry roller unit
Water jet rows (5 jets per row) 2 2 2 2 – – – –
Subject to alterations. All specifications have been made to the best of our knowledge. This brochure was printed climate-neutral. Printed in Germany. Info No. 01/0415
Efficiency
Our experts consult and partner with you in finding the best possible solution for your
project needs, whether you require individual machines or a complete product line. BRISAY-Maschinen GmbH | Grossostheim-Ringheim
Service
Prompt delivery and professional installation of our machines and systems go hand in
hand with premium training, through which we equip your staff with the skills necessary
to achieve the highest possible production. Our service technicians are always available,
around the world and around the clock, maximizing continuous production.
The VEIT Group is based in Landsberg am Lech (Germany) and is the leading manufacturer
worldwide for machines and plants in the field of ironing, fusing, pressing and refinishing of
garments. Our product portfolio ranges from traditional ironing tables and presses to fusing
machines and also includes automated units.