Professional Documents
Culture Documents
Brochure en LR
Brochure en LR
OUR SOLUTION.
BOA Recycling Solutions designs
2
CONTENT
D225 Series
4
D100/D130 Series
6
M Series S Series
8 10
Baseline Continette II
12 Baling press
14
Reelsplitter
16
Bag Opener 18
KSS Shredder 20
Transport solutions 22
3
D225 SERIE
The vertical prepress flaps in the filling opening of the press Because of this, materials that are difficult to press can be
close simultaneously, resulting in a closed press channel. processed as well. The press ram is equipped with a toothing
Because of this, optimal-weight homogeneous bales are for processing highly expansive materials. Consequently, the
produced without cutting being necessary. press is extremely suitable for processing paper, cardboard,
varied material, various plastics and other recyclables.
These flaps have been built in such a way that any impacting
forces are effectively absorbed. The front flap is smaller in If constructed with a “Refuse” ram the baler is also capable
view of the distribution of forces, and is equipped with a of pressing domestic waste, wood, straw, hay and textiles.
toothing, so that material between the flaps can be cut. Moreover, several control possibilities provide optimal
The rear flap is equipped with a fallback mechanism and pressing results with heavy, well shaped and stackable bales.
an anti-blockage switch, which minimizes interventions.
4
IMPRESS D 225 D.5V.1.6 IMPRESS D 225 B.5V.1.6
Hydraulic power unit 225 165 kW 225 165 kW
Main pump 3 x 75 3 x 55 kW 3 x 75 3 x 55 kW
Steering pump 18,5 18,5 kW 18,5 18,5 kW
Filter pump 7,5 5,5 kW 7,5 5,5 kW
Oil cooler 3 3 kW 3 3 kW
Oil heating - (optional)
Oil tank capacity 3900 2700 L 3900 2700 L
Average working cycle time 17 23 Sec 17 23 Sec
1620 mm
B-frame
D-frame
2820 mm
6190 mm 3810 mm
12000 mm
5
D100/D130 SERIE
The vertical prepress flaps in the filling opening of the press The press ram is equipped with a toothing for the treatment
close simultaneously, resulting in a closed press channel. of very expansive materials. Consequently, the press is
Because of this, optimal-weight homogeneous bales are extremely suitable to handle paper, cardboard, varied
produced without cutting being necessary. These flaps have material, various plastics and other recyclables.
been constructed in such a way that any impacting forces When constructed with a “Refuse” ram, the baler is also
are effectively absorbed. The front flap is smaller in view of capable of compressing domestic waste, wood, straw, hay
the distribution of forces, and is equipped with a toothing and textiles. Moreover, several control possibilities provide
so that material between the flaps can be cut. The rear flap optimal pressing results with heavy, well-shaped and
is equipped with a fallback mechanism and anti-blockage stackable bales.
switch, which minimizes interventions. Because of this,
materials that are difficult to press can be processed as well.
1620 mm
A-frame
B-frame
2820 mm
6190 mm 3810 mm
12000 mm
6
IMPRESS D 130 A.5V.1.6 IMPRESS D 100 A.5V.1.6
Hydraulic power unit 165 110 kW 110 75 kW
Main pump 3 x 55 2 x 55 kW 2 x 55 2 x 37 kW
Steering pump 18,5 15 kW 15 15 kW
Filter pump 5,5 4 kW 4 4 kW
Oil cooler 3 2,2 kW 1,5 1,5 kW
Oil heating - (optional)
Oil tank capacity 2700 2100 L 1850 1850 L
Average working cycle time 20 23 Sec 20 22 Sec
epends on material, input and bale weight.
Capacity D
Material weight
30 kg/m3 14 12 Ton/h 14 12 Ton/h
60 kg/m3 23 20 Ton/h 23 20 Ton/h
100 kg/m3 33 28 Ton/h 31 27 Ton/h
150 kg/m3 41 35 Ton/h 38 34 Ton/h
200 kg/m3 53 44 Ton/h 46 44 Ton/h
Press stroke volume (without load) 600 525 m3/h 640 570 m3/h
Operational voltage 400 V/50Hz 400 V/50Hz
Electrical insulation classification IP55 IP55
Operational hydraulic pressure 280 bar 300 bar
Press force 1266 KN 942 KN
Specific Press force pro cm2 16,0 kg/cm2 11,9 kg/cm2
Press stroke 2900 mm 2900 mm
Press channel dimensions 1100 x 720 mm 1100 x 720 mm
Dimensions filling hopper LxW 1620 x 1000 mm 1620 x 1000 mm
Optional 1920 x 1000 mm 1920 x 1000 mm
Press chamber volume 2,9 m3 2,9 m3
Bale length (adjustable) 1400 mm 1400 mm
Bale weight bis 800 kg bis 750 kg
Number of binding wires 5 vertical 5 vertical
3 horizontal (optional) 3 horizontal (optional)
Press weight approx. 43 Ton 38 Ton
Noise level <85 dB(A) <85 dB(A)
7
M SERIE
The vertical prepress flap in the filling opening closes before The press is reliable due to the cutter bar with exchangeable
the press ram finishes the press cycle. Because of this, cutters in the top of the press chamber. The press is
optimal heavy homogeneous bales are produced without extremely suitable for processing paper, cardboard,
making cutting necessary. This flap has been built in a way varied material, various plastics such as foils, bottles and
so that vertically occurring forces can well be absorbed. other recyclables. Moreover, several control possibilities
An anti-blockage cycle minimizes interventions. provide optimal press results with heavy, well-shaped
As a result of this, materials that are difficult to press can and stackable bales.
be processed as well.
1620 mm
2375 mm
5175 mm
3810 mm
9772 / 11230 mm (M90)
8
IMPRESS M 90 A.5V.1.6 IMPRESS M 75 A.5V.1.6 IMPRESS M 60 A.5V.1.6
Hydraulic power unit 110 75 kW 45 37 kW 37 22 kW
Main pump 2 x 55 2 x 37,5 kW 45 37 kW 37 22 kW
Steering pump 15 15 kW - - kW - - kW
Filter pump 4,0 4,0 kW 2,2 2,2 kW 2,2 2,2 kW
Oil cooler 1,5 1,5 kW 0,75 0,25 kW 0,75 0,25 kW
Oil heating - (optional)
Oil tank capacity 1850 1850 L 1000 1000 L 1000 800 L
Average working cycle time 19 21 Sec 23 28 Sec 21 36 Sec
weight.
Capacity Depends on material, input and bale
Material weight
30 kg/m3 11 10 Ton/h 8 7 Ton/h 8 6 Ton/h
60 kg/m 3
18 16 Ton/h 14 12 Ton/h 13 10 Ton/h
100 kg/m 3
25 22 Ton/h 20 18 Ton/h 18 14 Ton/h
150 kg/m3 30 27 Ton/h 26 23 Ton/h 23 18 Ton/h
Press stroke volume (without load) 450 400 m3/h 450 400 m3/h 430 370 m3/h
Operational voltage 400 V/50Hz
400 V/50Hz 400 V/50Hz
Electrical insulation classification IP55 IP55 IP55
Operational hydraulic pressure 280 bar 280 bar 280 bar
Press force 879 KN 712 KN 563 KN
Specific Press force pro cm2 11,1 kg/cm
2
9,0 kg/cm
2 7,1 kg/cm2
Press stroke 2200 mm 2200 mm 2200 mm
Press channel dimensions 1100 x 720 mm 1100 x 720 mm 1100 x 720 mm
Dimensions filling hopper LxW 1620 x 1000 mm 1620 x 1000 mm 1620 x 1000 mm
Press chamber volume 2,4 m3 2,4 m3 2,4 m3
Bale length (adjustable) 1400 mm 1400 mm 1400 mm
Bale weight bis 700 kg bis 600 kg bis 500 kg
Number of binding wires 5 vertical 5 vertical 5 vertical
3 horizontal (optional)
3 horizontal 3 horizontal
(optional) (optional)
Press weight approx. 33 Ton 32 Ton 31 Ton
Noise level <85 dB(A) <85 dB(A) <85 dB(A)
9
S SERIE
Baling press constructed as a cutting press with an automatic
The cutting knives are located underneath the robust The press is suitable to processing paper, cardboard, varied
V-shaped cutter bar in the press chamber and on top of materials, various plastics and other recyclables.
the press ram. There is an increased distance between the An anti-blocking pounder can be added - which is optional -
cutting system and the final end position of the ram stroke. to enable cutting very difficult types of material.
As a result of this, less material needs to be cut and more Moreover, several control possibilities provide optimal press
force and speed can be applied to compress the material. result with heavy, well-shaped and stackable bales.
Resulting in the best cutting performance and reducing
wear, operating costs and energy consumption.
1420 mm
2730 mm
4954 mm 3810 mm
9525 mm
10
IMPRESS S 75 A.5V.1.4 IMPRESS S 60 A.5V.1.4
Hydraulic power unit 45 37 kW 45 37 kW
Main pump 45 37 kW 45 37 kW
Steering pump 2,2 2,2 kW - - kW
Filter pump 0,75 0,25 kW 2,2 2,2 kW
Oil cooler 1000 1000 L 0,75 0,25 kW
Oil heating - (optional) 19 23 Sec
Oil tank capacity 1000 1000 L
Average working cycle time 23 28 Sec
Capacity Depends on material, input and bale weight.
Material weight
30 kg/m3 8 7 Ton/h 8 7 Ton/h
60 kg/m3 14 12 Ton/h 14 12 Ton/h
100 kg/m3 18 16 Ton/h 20 18 Ton/h
150 kg/m3 28 22 Ton/h 26 23 Ton/h
Press stroke volume (without load) 463 382 m3/h 450 400 m3/h
Operational voltage 400 V/50Hz 400 V/50Hz
Electrical insulation classification IP55 IP55
Operational hydraulic pressure 280 bar 280 bar
Press force 712 KN 712 KN
Specific Press force pro cm2 9,0 kg/cm2 9,0 kg/cm2
Press stroke 2200 mm 2200 mm
Press channel dimensions 1100 x 720 mm 1100 x 720 mm
Dimensions filling hopper LxW 1420 x 1000 mm 1620 x 1000 mm
Press chamber volume 1,7 m3 2,4 m3
Bale length (adjustable) 1400 mm 1400 mm
Bale weight bis 575 kg bis 600 kg
Number of binding wires 5 vertical 5 vertical
3 horizontal (optional) 3 horizontal (optional)
Press weight approx. 21 Ton 32 Ton
Noise level <85 dB(A) <85 dB(A)
11
BASELINE
The competitively priced BOA Baseline is a basic baling The BOA Baseline is a low-cost shear press with an
press that produces perfect mill-sized bales. It is user- automatic binding system and a hydraulically functioning
friendly, easy accessible and safe. pressure channel. It’s a fully automatic baling press which
is ultimately suitable to press paper, cardboard, plastic
This horizontal shear baler has an automatic binding system (such as film and PET) into well-shaped stackable bales.
with 5 vertical wires, using minimum floor space. It produces
bales fully automatically and has a press force of 60 tons. The baseline press is easy to control, maintenance-free and
The optimum design of the press chamber and the cutting has no unnecessary options. In short: The baseline reflects
bar results in excellent cutting performance. The machine for high-quality, operational reliability and low costs.
applies more force and speed to compress the material,
reducing wear, operating costs and energy consumption.
12
LOOK AT THE FACTS BENEFITS
Technical facts • Very efficient baling, thanks to its low installed power
• Self-supporting construction enabling the baler combined with a high press force.
to be installed quickly and easily. • Binding with 5 vertical wires, taking up a little floor space.
• Easy operation through an intuitive touch screen. • Easy accessible and low wear and tear, reducing the
• Reliable hydraulic drive, continuous oil filtration. maintenance costs to a minimum.
• Low installed power with high press force of up to 60 tons. • Very competitive price, quick return on investment.
• Reliable, hydraulically driven binding system for • User-friendly: touchscreen operation and the possibility
automatic binding of the bales. to program many different material settings.
• Vertical binding with 5 wires and small reel holders. • Makes heavy, evenly formed and easily-stackable
mill-sized bales.
Hydraulic facts
• Hydraulic unit with high-quality reliable
European components.
• Solid and low-noise pump. Basic and functional: making
• Valve block with cartridge valves.
• The hydraulic unit is compact,
the best mill-sized bale the
service friendly and well accessible. most effective way.
4330 mm
2080 mm 4750 mm
8750 mm
13
CONTINETTE II
BALING PRESS
presses have been sold worldwide. Almost all of them are still
The Continette II builds on the strengths of the original The result: low-maintenance, low-cost baling presses
Continette: reliability, durability, compactness, strength and offering long-term operational reliability of almost 100%.
low-cost. However, wherever improvements are possible, For decades.
they are made. Basically, the BOA engineers turned the
Continette II into the compact version of its revolutionary
high-end baling press, the Impress.
14
The Continette II is a low-cost channel baling press of The baling press is available with a variety of cutters,
the cutting press type, with automatic tying system and depending on the type of material for which it is used.
hydraulically controlled press channel for fully automatic The cutters are located under the robust cutter bar in
production and high capacity. the press frame and on top of the pressing ram.
1200 mm
1100 mm
2665 mm
2265 mm
1260 mm
6900 mm
Dimensions: Capacity*
LxWxH 6900 x 3500 x 2700 mm Bulk density (kg/m3) 25 50 75 100
L x W x H transportation 6900 x 2500 x 2700 mm Number of strokes ** 13 8 4 3
Dimensions of feeding chute: L x W 1200 x 720 mm Theoretical bale weight 315 340 365 300
Stroke length 1800 mm Bales per hour 12 21 33 42
Dimensions press channel: B x H 800 x 720 mm Tonnes per hour 4 7 10 12
* Depends on material, supply and bulk density / ** Assumption on the basis of bulk density
15
REELSPLITTER
The Reelsplitter was developed for cutting defective or
The material is cut into small pieces enabling processing in The Reelsplitter is useful for more than just paper reels.
e.g. a pulper or baler. The BOA product offering comprises BOA can also adapt the machine for other types of material
two reelsplitters – the HRSM and RSM types. Characteristic such as aluminium reels or bales with plastic.
of these machines is that their simple, proven construction, Different transport systems are available such as plate
operation and control. conveyors, rubber belt conveyors and walking floors.
SECURE OPERATION
The machine is also provided with a switchbox, Optional the machine can be equipped with a light curtain
straightforward switching system and an emergency emergency circuit which shuts down the machine
stop causing the cutter to stop immediately. The cutter automatically when persons enter the operation area.
is also protected against overload, in which case it will
automatically move up.
16
sind gegen Überlastung geschützt. Sie bewegen sich bei Überlast
automatisch nach oben in die Grundposition.
1200 mm
600 mm
950 mm
and can be height-adjusted by means of adjustable feet.
1800 mm
the cylinder. Cutting is controlled by an optical switch, so charged and discharged semi automatically. 1200 mm
600 mm
that manual setting of the core diameter is not necessary.
950 mm
1800 mm
3050 mm 1570 mm
RSM
2950 mm
1200 mm
600 mm
2950mm
950 mm
1200
600 mm
1800 mm
Max 5100 mm Max 2400 mm
3050 mm 1570 mm
RSM
RSM HRSM
HRSM
HRSM
17
BAG OPENER
18
This limits user and maintenance costs to the absolute adjusted by means of spindles. This makes it easy to process
minimum. The Bag Opener may be fed from a conveyor belt, several types of material; large bags, small bags, bales of
grabber or shovel with bags. The bags fall onto a drum material, fine material etc. After opening the bags, the
fitted with hammers. The helical placement of the hammers material will fall from the bottom of the machine onto
allows for maximum impact from each hammer. a conveyor or into a chute.
19
KKS SHREDDER
The KKS Shredder is the cost-effective solution for shredding The KKS shredder is very suitable for the paper and board
cardboard sheets and paper and cores. Transport and industry, reducing faulty or surplus material for further
handling costs of this voluminous material are significantly process and recycling. It is mainly characterize by its durable
minimized. After shredding, the machine can be handled features, easy control and cost efficiency.
more easily - being for example, baled or processed for
re-use.
20
SPECIAL INPUT SECTION
FOR CORES AND TUBES
The KKS Shredder has a separate insertion opening to put in
cores. This section is designed to process cores and tubes
easily. At that part of the machine, special knives are fixed to
the drum. Its sophisticated design makes the KKS shredder
highly suitable for shredding long and thick-walled tubes,
with layers of residual paper up to 25mm.
BENEFITS
• Easy access for cleaning and maintenance purposes.
• Frequency-controlled shafts (independently driven).
• Low noise level.
• Dust emission is kept to a minimum.
• Low energy consumption.
• Low wear and tear.
21
TRANSPORT SOLUTIONS
Chain conveyor
As a manufacturer of baling presses and a comprehensive conveyors, steel plate conveyors, circulation belts and
supplier of waste separation and disposal installations, walking floors. Large and small installations, built with the
BOA specialises in the development of turnkey solutions newest technologies. Closed construction, dust removal and
for an extensive range of problems in waste disposal. an integrated up and down sloping selection are options
In addition to BOA´s activities in the production of equipment for all our belts.
for waste disposal, BOA also supplies rubber belts, chain
22
RUBBER BELTS - RB
This type of conveyor belt consists of an endless rubber
sheet. Depending on the application, the sheets run on
support reels or slide plates. The sheet can be fitted with
rubber catchers, as a flat sheet or as a profiled sheet.
The rubber belt is available as a sorting belt but also as a
bunker belt. For bunker belts, sturdy hydraulically driven
bunker doors are available. Constructed with a heavy-duty
structure suitable for a large range of materials.
The 6 mm thick rubber transport sheet is attached to lateral forces. The raised sheet edge of reinforced steel sheet
cylindrical profiles installed between two transport chains. is composed of removable sections of 1500 mm in length.
A special guide rail on each cylinder protects the chain from The KTH can be installed in the floor or above-ground.
23
H I G H Q U A L I T Y &
E N V I R O N M E N T A L LY F R I E N D LY
info@boarecycling.nl www.boarecycling.nl