Professional Documents
Culture Documents
GNIDA - Useer Manual - Version 4.3
GNIDA - Useer Manual - Version 4.3
For
For
Version 4.3
GNIDA Smart DCR - User Manual - Version 4.3
TABLE OF CONTENTS
Page
S. No. Description
No
1.0 INTRODUCTION 2
3.0 OBJECTIVES 3
5.1 DO’S 4
5.2 DONT’S 4
1.0 INTRODUCTION
Every city in the world is continually evolving and developing to meet its citizen’s needs.
An authority powered by government will be controlling the development of cities to have
a harmonious as well as infrastructural and technologically superior living for all.
The authority will lay out a set of rules to be followed for every new development as well
as regulating existing development. The method is to receive set of engineering plans
related to each proposal, study them in detail and extract the basic information required
like built up area, spacing between adjacent building, height etc. after matching them
with the rules laid out, the authority can either approve the proposal or ask for certain
modifications to be done in the plan.
For larger cities this becomes a cumbersome process owing to the large amount of
applications received and manually calculating various areas, totaling and then coming
to a conclusion
So software has been developed by us, which will study the engineering plans provide in
the CAD format, Process the plans and generate complete and detailed set of report for
further decisions by the approval authorities.
A large amount of time saving has been achieved when implemented and the planners
consider this as a boon to them. This also helps developers as the waiting time for
sanctions have been greatly reduced.
Automation of Online Building Plan Approval System is the main part of the SmartDCR
which is used by Architects as well as Officers of Greater Noida Development Authority,
GNIDA.
Page 2 of 62
GNIDA Smart DCR - User Manual - Version 4.3
5. The Architects can also get their scrutiny report online using their
Reference Number.
This Process will scrutinize the submitted drawing by comparing with GNIDA Bye-Laws
and generates Reports. The uploaded drawing should be in .dwg format. Architects can
check their drawing status, whether successfully submitted or Returned back through e-
mail.
3.0 OBJECTIVES
To bring transformation in the plan scrutiny processing system with speed, accuracy,
consistency and transparency in the entire scrutiny process. To achieve the goal, it is
proposed to automate the planning scrutiny process by customization with Smart DCR.
The Automation helps to increase the productivity and Accuracy of the Drawing Result.
Page 3 of 62
GNIDA Smart DCR - User Manual - Version 4.3
5.1 DO'S
5.2 DONT'S
1. Outside the bounding rectangle, objects should not be kept. OLE objects
should not be used.
4. The Colour coded items, i.e. polylines, lines and text which are intended to
be processed must be in the layers starting with FLOOR. Other layers will
be ignored by the software
5. Mtext will not be processed by the software and whatever text placed on
Floor layers shall be Text only.
Page 4 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Preparation of computerized plans for SmartDCR has the following steps, which are to
be followed compulsory. Otherwise SmartDCR will not process the given drawing.
2. Layers and Colours should be followed as per the colour code table.
7. In the site plan, Front Setback should be in the Bottom Of the drawing.
Page 5 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Precheck is the software given for finding out all the polyline, line, and text related
problems in the drawing. When the Applicant submits the building map proposal, this
software enables the applicant to rectify the defects in the drawing and make it suitable
to run in the Scrutiny software. It reads the drawing elements and lists all the
discrepancies in the drawing. It will processes the file and gives the output with various
parameters as listed below. If errors are found in the drawing, the drawing will be
populated with hyperlinks to the errors and will be returned to the Applicant via
email.
1. Setback Boundary
4. Misplaced OTS
In the returned drawing, error details will be displayed such as disqualified object name;
floor name and drawing coordinate position. It will also draw a crossed grey line on all
the disqualified objects throughout the returned drawing. Press Ctrl button and Click on
the hyperlink error text, then the drawing will be automatically zoomed to the error area
of the drawing and the applicant can correct and resubmit the drawing. Incase of critical
error, for example Height of the building line is missing, there will be no hyperlink.
Page 6 of 62
GNIDA Smart DCR - User Manual - Version 4.3
1. Entry Gate
3. Ramp
5. Plinth Height
6. Building Height
7. Boundary Wall for all sides, individual lines for Solid wall and Grill.
1. Plot Boundary
2. Setback Boundary
5. Residential F.A.R.
6 Sunshade Front
7. Sunshade Rear
Page 7 of 62
GNIDA Smart DCR - User Manual - Version 4.3
17. Lift
22. Mumty
23. Canopy
25 Bounding Rectangle
28. Cupboard
29. Softlandscape
Page 8 of 62
GNIDA Smart DCR - User Manual - Version 4.3
2. Tree text should be kept as TREES-1 or TREES-2 or TREES-3 etc. and for
Evergreen trees text shall be kept as EVERGREENTREES-1 or
EVERGREENTREES-2 etc
3. Names of blocks
In the Text Objects for Typical Floors are followed as Format: “FLOOR01, FLOOR02,
FLOOR03……FLOORn th - Typical”
Page 9 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Color
S.No Description Corresponding Layer
Code
Polyline Objects
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
1 Plot Boundary 7
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
2 Setback Boundary 10
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-STILT (For Proposed)
3 Stilt Parking Area Boundary 5
FLOOR-STILT-EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Rain Water Harvesting
4 42
Trench
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
5 Residential FAR 181 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
12 Setback (Rear) 60
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND (For Proposed)
13 Open Parking Area 111
FLOOR-GROUND-EX (For Existing)
FLOOR-STILT(For Proposed)
14 Covered Parking Area 132
FLOOR-STILT-EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
28 Bounding Rectangle 61
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Garbage Shaft/Plumbing
29 Shaft/AC 2 Applicable floor layer*
Shaft
30 Lift Lobby 142 Applicable floor layer*
Page 12 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Text Objects
Bed room, Kitchen, Toilet
1 181 Applicable floor layer*
etc.
Block Naming and Typical
2 50 FLOOR-GROUND / FLOOR-STILT
Block text
Typical text for identifying
3 7 Applicable floor layer*
Typical floors
FLOOR-GROUND / FLOOR-STILT(For
No. of Trees to be Planted Proposed)
4 inside the 93
Plot FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
5 Industrial Building Use 134 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
WC, Bathroom, Urinal ( for
6 81
industrial )
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
7 Non FAR 4 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
8 Evergreen Trees 92
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
9 Watchman Shelter 54
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
10 Watch Tower 53
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
11 Commercial FAR 6 Applicable floor layer*
Page 13 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Line Objects
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
1 Ramp 216
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
2 Building Height 151
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
3 Basement Floor Height 123
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
4 Plinth Height 212
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
5 214
Front
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (GRILL) -
6 215
Front
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
7 217
Side Setbacks
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
8 218
Rear
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Height of the Gate from Proposed)
9 Plinth of 213
Boundary Wall FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Page 14 of 62
GNIDA Smart DCR - User Manual - Version 4.3
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
10 Gate 161
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
11 Water supply 100 FLOOR-SERVICELINE
12 Drainage 1 FLOOR-SERVICELINE
FLOOR-STILT(For Proposed)
13 Stilt Floor Height 21
FLOOR-STILT-EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Front Setback (For Proposed)
14 Commercial, Group 4
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Rear Setback (For Proposed)
15 Commercial, Group 3
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Ramp Side Setback (For Proposed)
16 Commercial, Group 6
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Other Side Setback (For Proposed)
17 Commercial, Group 2
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Page 15 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Page 16 of 62
GNIDA Smart DCR - User Manual - Version 4.3
COMMERCIAL CENTRE
Page 17 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Page 18 of 62
GNIDA Smart DCR - User Manual - Version 4.3
PLOT BOUNDARY
REAR OPEN
4.59 x 1.97
HALL
D 4.71 x 5.0
STORE D
D
2.8 x 3.29
W W
FRONT OPEN
10 x 2.14
MAIN GATE
1M WIDE RAMP
Page 19 of 62
GNIDA Smart DCR - User Manual - Version 4.3
SETBACK BOUNDARY
REAR OPEN
4.59 x 1.97
HALL
4.71 x 5.0
Setback Boundary
D
Polyline
D D Color
STORE Number 10
2.8 x 3.29 DRG ROOM BED ROOM
SIDE OPEN
3.03 x 2.77
D D
W W
FRONT OPEN
10 x 2.14
MAIN GATE
1M WIDE RAMP
Page 20 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Other-Side Color
W3
REAR OPEN
Number 201
Setback 4.4 X 2.4 KITCHEN
2.19X2.115
BED ROOM
Polyline D
3.05X4.57
V
Color D
TOILET
Number 21 3.00X1.62
D2
W3
UP
HALL
SIDE OPEN
SIDE OPEN
5.44X2.97
1.2 X 3.2
D1
W4
1M WIDE RAMP
Page 21 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Ramp-Side
Setback Other-Side
Line
Rear Setback Setback
Line Line
Color
Color Color
Number 6
Number 3 Number 2
12.78
ELECTRICAL SUBSTATION
HOSTEL-2
5M GATE
Front Setback
Line
Color
Number 4
SITE PLAN
Page 22 of 62
GNIDA Smart DCR - User Manual - Version 4.3
7 Car Parking stall shall be drawn as Polyline in Color No. 140. FLOOR-STILT
Covered Stilt parking area shall be drawn as Polyline in Color or
No.132. Additionally Stilt Parking area shall be drawn as FLOOR-STILT-EX
Polyline in Color No. 5.
Note: Colour No. 5 is applicable only for Stilt Parking and not
for Open Parking.
Covered Parking
Area
Polyline
Color
Number 132
FRONT OPEN
10 X 2.0
GATE
Page 23 of 62
GNIDA Smart DCR - User Manual - Version 4.3
8 Car Parking stall shall be drawn as Polyline in Color No. 140. FLOOR-GROUND
Open Parking Polyline area shall be drawn in Color No. 111 or
FLOOR-GROUND-EX
OPEN PARKING
REAR OPEN
8.74 X 3.0
SUNSHADE
W2 V W2
D1
BED ROOM
3.20 x 3.50
TOILET
1.91 x 2.48
BED ROOM
3.20 x 3.50
Open Parking
Area
D2
Polyline
D1 D1
Color
Number 111
W3 W2
D Car stall
SUNSHADE
Polyline
Color
Number 140
FRONT OPEN
8.32 x 8.54
TREES-2
MAIN GATE RWH
1M WIDE RAMP
Page 24 of 62
GNIDA Smart DCR - User Manual - Version 4.3
RAMP
REAR OPEN
KITCHEN
7.36 x 3.80
HALL D
2.82 x 3.92
BED ROOM
7.36 x 5.03
W4 D1 W3
Ramp
Line
FRONT OPEN
Color
Number 216
MAIN GATE
1M WIDE RAMP
Page 25 of 62
GNIDA Smart DCR - User Manual - Version 4.3
REAR OPEN
W4 W4
KITCHEN
7.36 x 3.80
HALL D
2.82 x 3.92
BED ROOM
7.36 x 5.03 Rain Water
Harvesting
Polyline
Color
W4 D1 W3 Number 42
FRONT OPEN
RWH
MAIN GATE
1M WIDE RAMP
Page 26 of 62
GNIDA Smart DCR - User Manual - Version 4.3
RESIDENTIAL F.A.R
D2
TOILET
1.50 x 2.47 V
BALCONY
W3 W4
D1 D1
D1
D1 UP
D2
25
D1
W4 W3 W3
Residential F.A.R
Polyline 1m WIDE BALCONY
Color
Number 181
FIRST FLOOR PLAN
Page 27 of 62
GNIDA Smart DCR - User Manual - Version 4.3
COMMERCIAL F.A.R
Commercial F.A.R
Polyline and Text
Color
Number 6
DN
UP
D1
D2 D1 D0
R/S R/S R/S R/S R/S R/S R/S R/S
SHOPPING CENTRE
R/S R/S R/S R/S R/S R/S R/S R/S R/S R/S
D1
1200 WIDE PASSAGE
TOILET SHE
UP
DN
SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP
TOILET HE
FF-10A FF-9 FF-8H FF-8G FF-8F FF-8E FF-8D FF-8C FF-8B FF-8A
Page 28 of 62
GNIDA Smart DCR - User Manual - Version 4.3
INSTITUTIONAL F.A.R
11,33
4,74
GL
LIFT
900 mm HIGH RAILING
12 13 14 22
3,06
09 08 01 25
UP
LIFT LOBBY
DN
M. D. CABIN
3.715 x 2.67 7,9
D1
D2
TOILET PANTRY
1.500 x 1.735 1.500 x 1.735 GL
V1
D2 L. TOILET D2
3.115 x 1.500
V1
GOVERNMENT OFFICE
D2 G. TOILET D2
3.115 x 1.500
V1
Institutional F.A.R W1
DN D
Color
Number 33
7,9
W1 W1 GL GL
Page 29 of 62
GNIDA Smart DCR - User Manual - Version 4.3
ENTRY/EXIT GATE
REAR OPEN
10.26 X 2.5
W4 W4
D1
D1 UP
D1
Entry / Exit Gate
Line
HALL KITCHEN Color
2.82 x 3.92 1.88 x 2.78
Number 161
W4 D1 W3 W2
FRONT OPEN
10.26 X 4.27
MAIN GATE
Page 30 of 62
GNIDA Smart DCR - User Manual - Version 4.3
15 Front sunshade shall be drawn as Polyline in Color No. 63. Applicable Floor
Layer
SUNSHADE
Rear Sunshade Side Sunshade
Polyline Polyline
Color Color
Number 64 Number 65
W3 W4
Front D1
Sunshade
Polyline D1 UP
Color
Number 63
HALL D2
2.82 x 3.92
W6 KITCHEN
1.88 x 2.78
W5
FIRST FLOOR
Page 31 of 62
GNIDA Smart DCR - User Manual - Version 4.3
18 Height of the building shall be drawn as Line in Color No. 151 FLOOR-GROUND
or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX
1,12
3,2
0,46
1,3
0,46 1,14
6"
4,65
1,68
4.5"
0,66
0,46
P.L.
4.5"
G.L.
Height of
the building
Line
Color
Number 151
SECTION AA
Page 32 of 62
GNIDA Smart DCR - User Manual - Version 4.3
G.L. G.L.
Total Height of
the building
Polyline SECTION - A A
Color
Number 13 SECTION AA
Page 33 of 62
GNIDA Smart DCR - User Manual - Version 4.3
20 Stilt Floor height is the minimum clear height taken from the FLOOR-STILT
bottom of the stilt floor to the bottom of the roof beam. It shall or
be drawn as line in Color No. 21. FLOOR-STILT-EX
TERRACE TERRACE
2.12 MT.
2.12 MT.
RCC SLAB RCC SLAB
2.40 MT.
LANDING
LIFT
2.64 MT.
LANDING
LIFT
11.76 MT.
LANDING
2.40 MT.
2.40 MT.
LANDING
LIFT
2.40 MT.
LANDING
LIFT
1.92 MT.
LANDING
LIFT
PASSAGE
GL PARKING SPACE PARKING SPACE GL
SECTION - A A
Stilt Height
Line
Color
Number 21
Page 34 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Basement Floor
Height
Line
Color
Number 123
G.L. G.L.
SECTION - A A
Page 35 of 62
GNIDA Smart DCR - User Manual - Version 4.3
900
OUTSIDE 1000
LVL+000
COMPOUND WALL
Scale 1:100
Page 36 of 62
GNIDA Smart DCR - User Manual - Version 4.3
28 For Typical Floors, Text shall be kept in Color 7 and it should Corresponding
kept be in corresponding layer Floor Layer
W3 W4
D1
D1 UP
Typical Floor
HALL D2
2.82 x 3.92 Text
Color
Number 7
W6 KITCHEN
1.88 x 2.78
W5
FLOOR01,FLOOR02-TYPICAL
TYPICAL FLOOR PLAN( FIRST AND SECOND )
Page 37 of 62
GNIDA Smart DCR - User Manual - Version 4.3
29 Lift shall be drawn as Polyline in Color No. 22. Staircase shall FLOOR-GROUND
be drawn as Polyline in Color No.115. or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX
W W
WATER CLOSET
V
1.81 X 2.19
KITCHEN
2.00 x 3.00
D1
BED ROOM
W HALL
4.93 X 3.92
LIFT
2.0 X 2.0
Color Color
Page 38 of 62
GNIDA Smart DCR - User Manual - Version 4.3
30 Front Balcony shall be drawn as Polyline in Color No. 35. Applicable Floor
Rear Balcony shall be drawn as Polyline in Color No. 52. Layer
Side Balcony shall be drawn as Polyline in Color No. 152.
They should be drawn on the same layer in which F.A.R
Polyline is drawn.
BALCONY
Rear Balcony
Polyline
Color
Number 52
W3
REAR OPEN
BED ROOM
SIDE OPEN
3.11 x 3.40
D1 D1
W4 W3 W3
RWH
FRONT OPEN
MAIN GATE
Front
1M WIDE RAMP
Balcony
Polyline
Color
Number 35
Page 39 of 62
GNIDA Smart DCR - User Manual - Version 4.3
W W
HALL
7.7 X 4.16
OTS
D D
KITCHEN BED ROOM BED ROOM
2.27 X 2.67 2.55 X 3.86 2.63 X 3.86
W
W
CANOPY W
Canopy
Polyline
Color
Number 222
Page 40 of 62
GNIDA Smart DCR - User Manual - Version 4.3
MUMTY
0.75M WIDE PROJECTION
Mumty
Polyline
Color
Number 215
TERRACE
SLOPE
Page 41 of 62
GNIDA Smart DCR - User Manual - Version 4.3
TREE
REAR OPEN
TOILET
V 1.50 x 2.47 8.27 X 3.52
D2 W3 W4
D1 D1
D1 UP
D2 Tree
Text
Color
DRG. ROOM KITCHEN
2.82 x 3.92 Number 93
1.88 x 2.78
D1
W4 W3 W3
FRONT OPEN
EVERGREENTREES-2 TREES-3
Page 42 of 62
GNIDA Smart DCR - User Manual - Version 4.3
INDUSTRIAL F.A.R
W W
R/S
W W
INDUSTRIAL
W
PRODUCTION HALL W
13.04X 39.84
loading/unloading
R/S
R/S
TOILET
1.80X2.10
UP
W
Color
Number 134
GROUND FLOOR PLAN
Page 43 of 62
GNIDA Smart DCR - User Manual - Version 4.3
WATCH TOWER
REAR SETBACK 4.5 WIDE
D
WATCH TOWER
Polyline and Text
Color
Number 53
PROPOSED INDUSTRY
SIDE SETBACK 3.0 WIDE
WATCHMAN SHELTER
Polyline and Text
Color
Number 54
WATCHMAN SHELTER
GATE
SITE PLAN
Page 44 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Basement for
Storage
Polyline
Color
Number 150
Storage
BASEMENT PLAN
Page 45 of 62
GNIDA Smart DCR - User Manual - Version 4.3
38 NON F.A.R area like Generator room, Electrical room area Applicable Floor
shall be drawn as Polyline in Color No.4 and Text shall be Layer
placed in the same layer
NON F.A.R
Generator Room
Polyline and Text
Color
Number 4
LIFT
2.24 x 2.40
UP
Generator room
1.74 X 3.23
BASEMENT PLAN
Page 46 of 62
GNIDA Smart DCR - User Manual - Version 4.3
1.00LVL+0.35 pipe
Number 141 PL. LVL Number 141 drain
LVL+000
SCALE 1:1
SCALE 1:1 CULVERT DETAIL
COMPOUND WALL DETAIL
BOUL DERS
L
0.5
COARSE SAND
1.5-2.0 MM
FOUNDATION RAINWATER HARVESTING
0.5
GRAVELS
0.45 5-10 MM
L BOUL DERS
0.5
0.15
Color 0.15 0.75 Color
0.15
Number 141 0.15 Number 141
0.75
SCALE 1:50
KEY PLAN
Text
I-229
I-230
I-231
Color
Number 141 9.00 M WIDE ROAD
KEY PLAN
NOT TO SCALE
Page 47 of 62
GNIDA Smart DCR - User Manual - Version 4.3
40 Door and Window Schedule text shall be kept in Color No. 141 FLOOR-GROUND
in the Title Block. or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX
D1 1.0X2.70 - 2.10 3
1.25
KITCHEN FOUNDATION DETAIL D2 1.2X2.70 - 2.10 2
N.T.S
BED ROOM BED ROOM
W1 0.90X1.05 0.90 2.10 1
W2 1.20X1.65 1.05 2.10 1
FRONT ELEVATION 230
W3 1.20X1.20 0.90 2.10 1
450
W1
D2
1.86
TOILET
VERANDA 2.38 x 2.54
8.05 x 2.77 18000 mm
DP TO
REQUIRED
TOP OF DRAIN
DRAIN
BOUNDARY WALL
TERRACE
A-285
TREES-2
RWH
A-300
GATE A-299SEC.-02 A-301
1.35 HT. BOUNDARY WALL +0.8 HT.
RAILING FROM TOP OF DRAIN
1M WIDE RAMP 9.0 M. WIDE ROAD
GROUND FLOOR PLAN TERRACE PLAN KEY PLAN
Page 48 of 62
GNIDA Smart DCR - User Manual - Version 4.3
41 BED ROOM, TOILET AND KITCHEN text should be kept in Applicable floor
Color No. 181 layer
6.00
1.92 0.97
0.12 3.00
D2
2.00 TOILET REAR OPEN 2.00
TOILET 1.8 x 1.88
V 3.97 X 2.00
Text D1 D1
0.23
Color
Number 181 BED ROOM BED ROOM 3.37
3.71 2.85 x 3.70 2.80 x 3.125
Color D1
0.12
KITCHEN D1
W UP
Text 0.23 FRONT OPEN
1.50 TREES-2 6.00 X 1.50 1.50
Color MAIN GATE
Page 49 of 62
GNIDA Smart DCR - User Manual - Version 4.3
7.2000
REAR OPEN
8.74 x 3.0
W2 V W2
D1
TOILET
WATER SUPPLY 1.91 x 2.48
BED ROOM
3.20 x 3.50
Line BED ROOM
3.20 x 3.5
Color D2
Number 100
D1 D1
DRAINAGE
Line
GT IC
MH
FRONT OPEN
RWH TREE-2
MAIN GATE
1000 HT.BOUNDARY WALL
0.8000
Page 50 of 62
GNIDA Smart DCR - User Manual - Version 4.3
SOFTLANDSCAPE
REAR OPEN
7
SIDE OPEN
6000 WIDE
SIDE OPEN
6000 WIDE
6
PROPOSED AREA
=23.00X45.00=1035.00 Sqm.
CAR PARKING AREA=4.70X39.272=184.57 SQM.
Softlandscape
3
Polyline
Color 2
Number 12
1
FRONT OPEN
SITE PLAN
Page 51 of 62
GNIDA Smart DCR - User Manual - Version 4.3
TEMPORARY STRUCTURE
REAR OPEN 4X1
Temporary
SIDE OPEN
structure
SIDE OPEN
=23.00X45.00=1035.00 Sqm.
Color
CAR PARKING AREA=4.70X39.272=184.57 SQM.
Number 155
4
FRONT OPEN
GATE GATE
SITE PLAN
Page 52 of 62
GNIDA Smart DCR - User Manual - Version 4.3
45 Toilet area shall be drawn as polyline in Color No. 4 and text FLOOR-GROUND
shall be kept inside color 4 polyline. or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX
TEMPORARY STRUCTURE
REAR OPEN 4X1
SIDE OPEN
Toilet
SIDE OPEN
Color
Number 4
FRONT OPEN
WC BATHROOM
1.50X1.50 1.50X1.50
URINAL
TOILET
3.12X6.81 URINAL
D
GATE
SITE PLAN
Page 53 of 62
GNIDA Smart DCR - User Manual - Version 4.3
TEMPORARY STRUCTURE
REAR OPEN 4X1
WC, BATHROOM,
SIDE OPEN
URINAL
SIDE OPEN
Color
Number 81
FRONT OPEN
WC
BATHROOM
1.50X1.50 1.50X1.50
URINAL
URINAL
TOILET
3.12X6.81 D
GATE
SITE PLAN
Page 54 of 62
GNIDA Smart DCR - User Manual - Version 4.3
BOUNDING RECTANGLE
BOUNDING RECTANGLE
Polyline
Color
Number 61
BRICK TILES
MUD PUSKA DOOR AND WINDOW SCHEDULE
HOT BITUMEN TWO COATS
R.C.C SLAB
230
TYPE SIZE CILL LVL. LINTEL LVL. NOS.
450
D1 1.0X2.70 - 2.10 3
1.25
KITCHEN FOUNDATION DETAIL D2 1.2X2.70 - 2.10 2
N.T.S
BED ROOM BED ROOM
W1 0.90X1.05 0.90 2.10 1
W2 1.20X1.65 1.05 2.10 1
FRONT ELEVATION 230
W3 1.20X1.20 0.90 2.10 1
450
W1
D2
1.86
TOILET
VERANDA 2.38 x 2.54
8.05 x 2.77 18000 mm
DP TO
REQUIRED
TOP OF DRAIN
DRAIN
BOUNDARY WALL
TERRACE
A-285
TREES-2
RWH
A-300
GATE A-299SEC.-02 A-301
1.35 HT. BOUNDARY WALL +0.8 HT.
1M WIDE RAMP
RAILING FROM TOP OF DRAIN
9.0 M. WIDE ROAD
GROUND FLOOR PLAN TERRACE PLAN KEY PLAN
The lower left corner of the Bounding rectangle to be kept in 0,0, co-ordinate
Page 55 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Building footprint
JOINERY DETAILS
SEWAGE TREATMENT PLANT
MD Main Door 1.0M X 2.18M Polyline
W Window 1.0M X 1.05M
4M WIDE DRIVEWAY
V1 Ventilator 0.9M X 0.6M
Number 10
AREA STATEMENT SQM.
Block Name
SITE AREA = 1958.29 SQ.M
BLOCK 1
LIFT LIFT
FIRST FLOOR 200.71
Color
TOTAL 200.71 Number 50
4M WIDE DRIVEWAY 4M WIDE DRIVEWAY
BLOCK 1 BLOCK 2
SCALE - 1 : 100
N
W
APPLICANT
ARCHITECT SIGNATURE
Block Distinguishers
Polyline & Text
ROAD WIDTH 20.5M
Color
20.5M WIDE ROAD
Number 50
20.5M WIDE ROAD
proposed site
KEY PLAN
N.T.S
BLOCK 1 BLOCK 2
W W V
MD Main Door 1.0M X 2.18M W W V
MD Main Door 1.0M X 2.18M
TOILET
W Window 1.0M X 1.05M TOILET
W Window 1.0M X 1.05M
KITCHEN DINING 1.22 X 1.99 KITCHEN DINING 1.22 X 1.99
D D
MD MD
FLOOR NAME FSI NON FSI FLOOR NAME FSI NON FSI
W W
MD
FIRST FLOOR 200.71 MD
FIRST FLOOR 200.71
W BED ROOM W W BED ROOM W
C C C C C C C C C C C C
D 2 D
HALL HALL
W BED ROOM
4.69 X 5.85 W
TOTAL 200.71 W BED ROOM
4.69 X 5.85 W
TOTAL 200.71
4.48 X 2.81 4.48 X 2.81
D2 D2
D D
KITCHEN DINING TOILET KITCHEN DINING TOILET
W W V W W V
N
W
S
E
STILT FLOOR FIRST FLOOR TERRACE FLOOR APPLICANT STILT FLOOR FIRST FLOOR TERRACE FLOOR APPLICANT
Page 56 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Page 57 of 62
GNIDA Smart DCR - User Manual - Version 4.3
BOUL DERS
0.5
COARSE SAND
1.5-2.0 MM
0.5
5-20 MM pipe
P 0.23 L drainage
P L system
REAR BAL.COVD AREA
(5.28X1.00)+(1.00X1.40)=6.68X2=13.36 SQM.
0.45 1050 HT.PARPAT WALL
G L 0.45 M.Dia
G L 150 MM DIA BORE FILLED
0.15 WITH GRAVELS 3-6 MM
13M
0.15
1050 HT.PARPAT WALL
0.15 0.15
0.15 0.9 0.15 0.75 pipe
0.15 0.15
0.15 WATER HARVESTING PLAN & SECTION
0.15
0.9 0.75
FOUNDATION DETAIL RAINWATER HARVESTING DETAIL DOOR AND WINDOW SCHEDULE
SCALE 1:50
450 HT.P.WALL 450 HT.P.WALL D 1000X2100 W2 5000X1500
D1 900X2100 W2 900X1500
STAIR CASH TERRACE
D1 D2 750X2100 V 450X600
T= .250 DN
R=.200 DRAWN BY:- AR. SHAKEEL
W=1.00
SCALE 1:100
N
450 HT.P.WALL
LVL+350
TOTAL COVD AREA ALL FL.
RR
A TOILET OPEN
TE
2.39X2.29 V
750 WD. S/S 1000 WD PROJECTION (C) (INCLUDING STILT+STAIR CASH +MUMTY +BAL.)
1050 HT.PARPAT WALL
1000 WD BALCONY (88.58+88.58+29.16+8.04)= 241.36 SQM.
W W
D1 TOTAL COVD AREA ALL FL.
TOILET MUMTY TERRACE (EXCLUDING STILT+STAIR CASH+MUMTY+BAL.)
1.885X2.525 SCALE 1:100 (G.F.=88.58)-7.42 = 81.16 SQM.
KITCHEN BED ROOM
2.50X4.64 2.825X4.64
F.A.R. = 68.48
BED ROOM BED ROOM
3.91X3.35 3.65X3.35 RE-CONSTRUCTION .RESI
BLDG.PLAN ON PLOT
C-168
D1 D1 NO:-C-168 SECTOR-37
UP
D2 D1
FROM F.A.R.
SHAFT RAILING
1.52X.88 SHAFT OPEN
1.52X.88
(B)
INSIDE
D1
COMP. WALL
LVL+350
OUTSIDE
PL. LVL
KITCHEN LVL+000
4.21X3.49 3.35X3.49 OWNER SIGN.
FRONT OPEN
COMPOUND WALL DETAIL
SCALE 1:200
D D1
1000 WD PROJECTION W W2
gate
FRONT OPEN 1000 WD BALCONY
1050 HT.PARPAT WALL
MAIN GATE LVL+350 A OPEN +350 PL. ram
p
TREE-2 (A) MS
(PROP.)
ARCH. SIGN.........
Hyperlink error
Page 58 of 62
GNIDA Smart DCR - User Manual - Version 4.3
W W
R/S
W
PRODUCTION HALL W
13.04X 39.84
loading/unloading
R/S
R/S
TOILET
1.80X2.10
UP
W
R/S
R/S
W W Building use text is not found error
Page 59 of 62
GNIDA Smart DCR - User Manual - Version 4.3
TEXT OVERLAP
W W
R/S
W
Text overlap W
INDUSTRIAL
INDUSTRIAL
W
PRODUCTION HALL W
13.04X 39.84
loading/unloading
R/S
R/S
TOILET
1.80X2.10
UP
W
W
text overlap error
W
R/S
R/S
W W
Page 60 of 62
GNIDA Smart DCR - User Manual - Version 4.3
4 If Non FAR text is not kept inside Color No.4 polyline, then NA
precheck software will mark the error in the cad drawing as
shown below. To correct this error, place Non FAR text inside
Color No.4 polyline.
Non FAR text is either not found or not completely enclosed in polyline
1,02 0,9
0,91
PATIO
BALCONY
1,55 D2
0,59
V1 V1
0,92
1,01
0,46 1,3
10 9 8 0,84 1,28
D2 11 7
1,55
0,27
PANTRY 12 6 TOILET
0,91
0,74 13 5
OFFICE
2,29
14 4
0,63
1,3
D3 0,45
0,73
0,84
0,85
0,85
0,46
D3 D3
2,67
D2 0,01
0,59
0,74 1,83 D2
1,84
7,33
ENTRANCE FOYER
7.33
V1 1,55 D2
1,01
TOILET
1,17
2,19 2,19
2,19
SERVANT ROOM
0,64
0,64
D1
1,76
D3 RECEPTION + WAITING W2 W2
1,55
GUEST ROOM
0,73
0,37
0,92
0,75
0,75
0,75
1 2 D2 1,56
0,73 0,62 0,73 2
0,82 1,14 1 1,88 0,6 0,73
2,19
0,38
W1 W1 W1
1,09
1,1
GARDEN
1,83
1,65 0,38
10,99 12,54
9M WIDE ROAD
Non FAR text is either not found or not completely enclosed in polyline
Page 61 of 62
GNIDA Smart DCR - User Manual - Version 4.3
Critical error - Height of the Building as line is not present in the drawing
G.L. G.L.
SECTION - A A
Page 62 of 62