Professional Documents
Culture Documents
Yamaha Psr-E403 PDF
Yamaha Psr-E403 PDF
Yamaha Psr-E403 PDF
CONTENTS(目次)
SPECIFICATIONS(総合仕様).............................................. 3/4
CIRCUIT BOARD LAYOUT & WIRING
(ユニットレイアウトと結線図)............................................. 5
PANEL LAYOUT(パネルレイアウト).................................... 6
DISASSEMBLY PROCEDURE(分解手順).............................. 8
LSI PIN DESCRIPTION(LSI端子機能表)............................. 14
IC BLOCK DIAGRAM(ICブロック図).................................. 17
CIRCUIT BOARDS(シート基板図)....................................... 18
TEST PROGRAM(テストプログラム)............................ 26/29
BACKUP & INITIALIZATION
(バックアップと初期化の方法)...................................... 32/33
MIDI IMPLEMENTATION CHART ......................................... 34
MIDI DATA FORMAT ............................................................. 35
PARTS LIST
BLOCK DIAGRAM(ブロックダイアグラム)
OVERALL CIRCUIT DIAGRAM(総回路図)
PK 001752
20060200-000000
HAMAMATSU, JAPAN
Copyright (c) Yamaha Corporation. All rights reserved. PDF ’06.04
PSR-E403
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the use rs,
and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor’s Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
印の商品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用ください。
2
PSR-E403
SPECIFICATIONS
Keyboards Effects
• 61 standard-size keys (C1–C6), with Touch Response. • Reverb: 9 types
Display • Chorus: 4 types
• LCD display (backlit) • Harmony: 26 types
• Arpeggio: 50 types
Setup
• STANDBY/ON
Song
• MASTER VOLUME: MIN–MAX • 30 Preset Songs + 5 User Songs + Accessory CD-ROM
Songs (70)
Panel Controls • Song Clear, Track Clear
• SONG, VOICE, STYLE, EASY SONG ARRANGER, • Song Volume
PERFORMANCE ASSISTANT ON/OFF, ARPEGGIO ON/ • Song Control: , A-B REPEAT, PAUSE, REW, FF,
OFF, LESSON L/R, LESSON START, METRONOME ON/ START/STOP
OFF, PORTABLE GRAND, DEMO, FUNCTION, MUSIC
DATABASE, TOUCH ON/OFF, HARMONY ON/OFF,
Performance assistant technology
DUAL ON/OFF, SPLIT ON/OFF, TEMPO/TAP, [0]–[9], [+], Recording
[-], CATEGORY, Dial, ASSIGN, (ACMP ON/OFF), A-B • Song
REPEAT (SYNC STOP), PAUSE (SYNC START), START/ User Song: 5 Songs
STOP, REW (INTRO/ENDING/rit.), FF (MAIN/AUTO Recording Tracks: 1, 2, 3, 4, 5, STYLE
FILL), REGIST MEMORY ([ ] (MEMORY/BANK), [1], [2]), MIDI
SONG MEMORY (REC, [1]–[5], [A]) • Local On/Off • Initial Send • External Clock
Realtime Control • Keyboard Out • Style Out • Song Out
• Pitch Bend Wheel Auxiliary jacks
• Nobs A, B • PHONES/OUTPUT, DC IN 12V, USB, SUSTAIN
A: Cutoff, Reverb, Attack, Style Cutoff, Style Tempo
B: Resonance, Chorus, Release, Style Resonance Amplifier
• 2.5W + 2.5W
Voice
• 116 panel voices + 12 drum/SFX kits + 361 XGlite voices Speakers
+ 15 arpeggio voices • 12cm x 2 + 3cm x 2
• Polyphony: 32 Power Consumption
• DUAL • 10W
• SPLIT Power Supply
Style • Adaptor: Yamaha PA-3C AC power adaptor
• 155 Preset Styles + 1 User Style File • Batteries: Six “D” size, R20P (LR20) or equivalent batteries
• Style Control: ACMP ON/OFF, SYNC STOP, Dimensions (W x D x H)
SYNC START, START/STOP, • 952 x 388 x 146 mm (37-1/2" x 15-1/4" x 5-3/4")
INTRO/ENDING/rit., MAIN/AUTO FILL
• Fingering: Multi Finger Weight
• Style Volume • 7.0kg (15 lbs. 7 oz.) (not including batteries)
Music Database Supplied Accessories
• 256 • Music Rest
• Accessory CD-ROM
Education Feature
• Owner’s Manual
• Dictionary
• Lesson 1–3, Repeat & Learn
Optional Accessories
Registration Memory
• AC Power Adaptor: PA-3C
• 8 banks x 2 types
• Footswitch: FC4/FC5
Function • Keyboard Stand: L-2C/L-2L
• VOLUME: Style Volume, Song Volume • Headphones: HPE-150
• OVERALL: Tuning, Transpose, Split Point, Touch Sensi-
tivity, Pitch Bend Range
• MAIN VOICE: Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
• DUAL VOICE: Voice, Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
• SPLIT VOICE: Voice, Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
• EFFECT: Reverb Type, Chorus Type, Master EQ Type
• HARMONY: Harmony Type, Harmony Volume
• ARPEGGIO: Arpeggio Type, Arpeggio Velocity
• SFF Load: Style File Load
• PC: PC Mode
• MIDI: Local On/Off, External Clock, Initial Send,
Keyboard Out, Style Out, Song Out
• METRONOME: Time Signature Numerator, Time Signature
Denominator, Metronome Volume
• LESSON: Lesson Track (R), Lesson Track (L)
• UTILITY: Grade, Demo Cancel
3
PSR-E403
総合仕様
鍵盤 ・ ハーモニー : ハーモニータイプ、ハーモニー音量
・ レギュラーサイズ61鍵 ・ アルペジオ : アルペジオタイプ、アルペジオベロシティー
(C1∼C6: タッチレスポンス付き) ・ SFFロード : スタイルファイルロード
ディスプレイ ・ PC : PCモード
・ 液晶ディスプレイ(バックライト付き) ・ MIDI : ローカル オン/オフ、外部クロック、
イニシャルセンド、キーボードアウト、
セットアップ スタイルアウト、ソングアウト
・ [電源切/入](STANDBY/ON) スイッチ ・ メトロノーム : 拍子、1拍の長さ、メトロノーム音量
・ 全体音量(MASTERVOLUME) コントロール:小∼大 ・ レッスン : レッスントラックR、レッスントラックL
パネルコントロール ・ ユーティリティ : 採点オン/オフ、デモキャンセル
・ [タッチオン/オフ]、[ハーモニーオン/オフ]、 エフェクト
[デュアルオン/オフ]、[スプリットオン/オフ]、[デモ]、 ・ リバーブ :9種類
レッスン[スタート]、レッスン[L/R]、[アルペジオオン/ ・ コーラス :4種類
オフ]、[パフォーマンスアシスタントオン/オフ]、[機能]、 ・ ハーモニー :26種類
[ミュージックデータベース]、[メトロノームオン/オフ]、 ・ アルペジオ :50種類
[グランドピアノ]、[ソング]、[イージーソングアレンジャー]、
[スタイル]、[楽器]、ダイアル、カテゴリー[ ]/[ ]、
ソング
・ 内蔵ソング30曲+ユーザーソング5曲+
[0]∼[9]、[+]、[−]、[アサイン]、[ ]/[スタイルオン/オフ]、 付属CD-ROM(70曲)
[A-Bリピート]/[シンクロストップ]、[一時停止]/[シンクロ ・ ソングクリア、トラッククリア
スタート]、[巻戻し]/[イントロ/エンディング/rit.]、 ・ ソング音量
[早送り]/[メイン/フィルイン]、[スタート/ストップ]、 ・ ソングコントロール:
[テンポ/タップ]、レジストレーションメモリー([●](メモリー/ 、A-Bリピート、一時停止、巻戻し、早送り、
バンク)、[1]、[2])、ソングメモリー([録音]、[1]∼[5]、[A]) スタート/ストップ
リアルタイムコントロール パフォーマンスアシスタント
・ ピッチベンドホイール
録音
・ ノブA/B
・ ソング
A:カットオフ、リバーブ、アタック、スタイルカットオフ、
スタイルテンポ ユーザーソング :5曲
B:レゾナンス、コーラス、リリース、スタイルレゾナンス 録音トラック :1、2、3、4、5、スタイル
楽器 MIDI
・ 116 パネル音色+12ドラム/SFXキット+ ・ ローカル オン/オフ、イニシャルセンド、外部クロック、
361 XGlite音色+15アルペジオ音色 キーボードアウト、スタイルアウト、ソングアウト
(最大同時発音数32)
・ デュアルボイス 付属端子
・ スプリットボイス ・ USB、SUSTAIN、PHONES/OUTPUT、DC IN12V
スタイル アンプ実用最大出力
・ 155プリセット+1ユーザースタイルファイル ・ 2.5W+2.5W
・ スタイルコントロール: スピーカー
スタイルオン/オフ、シンクロストップ、シンクロスタート、
スタート/ストップ、イントロ/エンディング/リタルダンド、 ・ 12cm×2+3cm×2
メイン/フィルイン 電源
・ マルチフィンガリング ・ 電源アダプター:PA-3C
・ スタイル音量 ・ 電池 :単1乾電池(1.5V)×6
ミュージックデータベース
電池寿命
・ 256
・ マンガン電池で約23時間
レッスン機能
・ コード辞書 消費電力
・ レッスン1∼3、くり返し練習 ・ 12W
レジストレーションメモリー 寸法(幅×奥×高mm)
・ 8バンク×2 ・ 952×388×146
機能 質量
・ ボリューム : スタイル音量、ソング音量 ・ 7.0kg(乾電池含まず)
・ オーバーオール : トランスポーズ、チューニング、ピッチベン
ドレンジ、スプリットポイント、タッチ感度 付属品
・ メインボイス : 音量、オクターブ、パン、リバーブレベル、 ・ 電源アダプターPA-3C、譜面立て、和文シート、
コーラスレベル、アタックタイム、リリース CD-ROM、取扱説明書、保証書
タイム、フィルターカットオフ、フィルター
レゾナンス オプション(別売)品
・ デュアルボイス : 楽器番号、音量、オクターブ、パン、 ・ キーボードスタンド:L-2C/L-2L
リバーブレベル、コーラスレベル、 ・ ソフトケース:SCC-35
アタックタイム、リリースタイム、フィルター ・ ヘッドフォン:HPE-150/HPE-30
カットオフ、フィルターレゾナンス ・ フットスイッチ:FC4/FC5
・ スプリットボイス : 楽器番号、音量、オクターブ、パン、
リバーブレベル、コーラスレベル、
アタックタイム、リリースタイム、フィルター
カットオフ、フィルターレゾナンス
・ エフェクト : リバーブタイプ、コーラスタイプ、
マスターEQタイプ
4
PSR-E403
TWL TWR
!0
q
DMLCD
u !3
!7 -2
!1 !8 !5
!7 -1
w e
t
t
PANEL LAYOUT(パネルレイアウト)
• Front Panel A
q e u !2
r i o !3 GrandPno
!6
t !0 !4 001 001
w
y !1 !5
@3 @4 @5 @6 @7 @8 @9 #0 #1
#4
A'
6
PSR-E403
!8
!7 !9
!6 @2
@0
@1
#2 #3
• Rear Panel
#5 #6 #7 #8
A'
7
PSR-E403
DISASSEMBLY PROCEDURE(分解手順)
Caution: Be sure to attach the removed filament tape just as it was before removal.
注意:分解時に取り外したフィラメントテープは、必ず元通りに取り付けてください。
Fig.1(図1)
Fig.3(図3)
Fig.2(図2)
8
PSR-E403
TWR TWL
[210H] [210G]
Connector PNR [210F] [210E] [210E] [210A] [210J] PNPB
assembly TWR LCD unit [210B] x 15 PNPB Connector
(TWR束線) (液晶ユニット) assembly TWL [210K]
(TWL束線)
Wheel assembly
(ホイールAss'y)
Volume knob
(Vツマミ) Push knob
(プッシュツマミ)
PNJKSTB
(STB)
Fig.5(図5) Fig.6(図6)
9
PSR-E403
LCD
(液晶ディスプレイ) Conductor side (導電側)
Back-lit assembly
(バックライトAss'y) Rubber connector
(ゴムコネクター)
Rubber connector Fig.8(図8)
(ゴムコネクター)
LCD holder
(LCDホルダー) 3 4 5 6
DMLCD
DMLCD
[50] 7 8
1 2
[50]: Bind Head Tapping Screw-B (Bタイト+BIND)
3.0X12 MFZN2W3 (WE987400)
Fig.7(図7) Fig.9(図9)
7-2-2 TWL Circuit Board and Speaker L (Tweeter) 7-2-2 TWL シート、スピーカ(ツイーター)左
Remove the connector assembly TWL soldered to TWL シートに半田付けされている TWL 束線とス
the TWL circuit board and two (2) screws marked ピーカ束線を外し、[210G]のネジ2本を外してTWL
[210G]. The TWL circuit board and speaker L シートとスピーカ(ツイーター)左を外します。
(tweeter) can then be removed. (Fig.4) (図 4)
7-2-3 TWR Circuit Board and Speaker R (Tweeter) 7-2-3 TWR シート、スピーカ(ツイーター)右
Remove the connector assembly TWR soldered to TWR シートに半田付けされている TWR 束線とス
the TWR circuit board and two (2) screws marked ピーカ束線を外し、[ 2 1 0 H ] のネジ 2 本を外して
[210H]. The TWR circuit board and speaker R TWRシートとスピーカ(ツイーター)右を外します。
(tweeter) can then be removed. (Fig.4) (図 4)
10. PNPB Circuit Board and Wheel Assembly 10. PNPB シート、ホイール Ass'y
(Time required: About 4 minutes) (所要時間: 約 4 分)
10-1 Pull out the two (2) rotary knobs for “A” and “B” from 10-1 コントロールパネルから、 “A”
“B”用のロータリー
the control panel. (Fig.1) ノブ 2 個を抜いておきます。(図 1)
10-2 Remove the lower case assembly. (See procedure 1.) 10-2 下ケース Ass'y を外します。(1 項参照)
10-3 Remove the six (6) screws marked [210J] and two 10-3 [210J]のネジ 6 本と[210K]のネジ 2 本を外して、ホ
(2) screws marked [210K]. The PNPB circuit board イールAss'yが付いた状態でPNPBシートを外しま
can then be removed with the wheel assembly. す。(図 4)
(Fig.4) 10-4 PNPB シートからホイール Ass'y を抜いて外しま
10-4 Pull out the wheel assembly from the PNPB circuit す。(図 11)
board. (Fig.11)
Encoder knob
(エンコーダツマミ) PNPB Wheel assembly
(ホイールAss'y)
Fig.10(図10) Fig.11(図11)
11
PSR-E403
[200C]
C1 C2 B2 C3 B3 C4 C5 C6
12
PSR-E403
61L 61H
9 10 11 12 6 7 8
2 3 4 5 6 7 8 1 1 3 4 5 2
Fig.14(図14)
13
PSR-E403
14
PSR-E403
15
PSR-E403
16
PSR-E403
IC BLOCK DIAGRAM(ICブロック図)
SN74LV32APWR (X5647A00) SN74LV138APWR (X7284A00) BA4510F-E2 (X7300A00)
DMLCD: IC207 DMLCD: IC401, 402 DMLCD: IC502
Quad 2 Input OR 3 to 8 Demultiplexer Dual Operational Amplifier
2Y 6 9 3A 6 G1 Y4 11
G1 Y4
GND 7 8 3Y Output Y7 7 Y7 Y5 10 Y5
Y6
GND 8 9 Y6
BA5417 (XV771A00)
PNJKSTB(PNJK): IC551
POWER AMP
T.S.D
ST. BY
BS BS FILTER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(N.C.)
BS2
OUT2
Vcc
OUT1
BS1
POWER-GND
STBY
FILTER
NF1
IN1
IN2
NF2
PRE-GND1
PRE-GND2
17
PSR-E403
CIRCUIT BOARDS(シート基板図)
DMLCD Circuit Board (X7174C0) ...................................................................................... 18/19
ENC (VR 3/4) Circuit Board (X7175B0) ................................................................................... 24
MVR (VR 2/4) Circuit Board (X7175B0) .................................................................................. 20
PNJKSTB(PNJK) (PNAM 1/6, 3/6) Circuit Board (X7173C0) ................................ 20/21/22/23
PNJKSTB(STB) (PNAM 4/6) Circuit Board (X7173C0) .......................................................... 20
PNPB (VR 1/4, 4/4) Circuit Board (X7175B0) ......................................................................... 24
PNR (PNAM 2/6) Circuit Board (X7173C0) ....................................................................... 22/23
TWL (PNAM 5/6, 6/6) Circuit Board (X7173C0) ..................................................................... 21
TWR (PNAM 5/6, 6/6) Circuit Board (X7173C0) ..................................................................... 21
61H Circuit Board (X2335C0) .................................................................................................. 25
61L Circuit Board (X2336B0) ................................................................................................... 25
Note : See parts list for details of circuit board component parts.
注: シートの部品詳細はパーツリストをご参照下さい。
to PNR(PNAM 2/6)-CN751
Coil (WH469300)
L803
to PNJKSTB(PNJK)
(PNAM 1/6)-CN156
R817とR818のパットにコイル
(WH469300)を装着します。
1 2
1 3 4 5
to 61H-CN1 to 61L-CN5 to 61H-CN2
not installed to PNJKSTB(PNJK)
(PNAM 3/6)-CN851(3pin–5pin)
to PNJKSTB(PNJK)
(PNAM 3/6)-CN851(1pin)
Component side(部品側)
DMLCD: 2NA-WG23540 1
18
PSR-E403
Pattern side(パターン側)
DMLCD: 2NA-WG23540 1
19
PSR-E403
to TWL
(バックライトAss'y)
(PNAM 5/6, 6/6)
to Back-lit assembly
to DMLCD-CN101
to PNJKSTB(PNJK)
(PNAM 3/6)-CN152
to WOOFER L
(ウーファー(左))
Component side(部品側)
PNJKSTB(STB) (PNAM 4/6) Circuit Board MVR (VR 2/4) Circuit Board
STANDBY/ ON
MASTER
VOLUME
Component side(部品側)
Component side(部品側)
20
PSR-E403
FF/ /
REW/ PAUSE/ A-B REPEAT/
TEMPO/TAP START/STOP MAIN ACMP
INTRO ENDING SYNC START SYNC STOP
AUTO FILL ON/OFF
PERFORMANCE SPLIT
PORTABLE ASSISTANT ON/OFF
GRAND ON/OFF
TOUCH
FUNCTION DEMO ON/OFF
/PC
Pattern side(パターン側)
Pattern side(パターン側)
PNJKSTB(PNJK): 2NA-WG23530
TWL, TWR: 2NA-WG23530
21
PSR-E403
VOICE/
SONG
to ENC (VR3/4) MELODY
-CN764 VOICE
STYLE
EASY
SONG
ARRANGER
SONG
Component side(部品側)
to DMLCD-CN803
DC IN 12V PHONES/ SUSTAIN USB (2pin)
OUTPUT
Component side(部品側)
PNR: 2NA-WG23530
PNJKSTB(PNJK): 2NA-WG23530
22
PSR-E403
SONG SONG SONG SONG SONG SONG SONG REGIST REGIST REGIST
MEMORY (A) MEMORY (3) MEMORY (2) MEMORY (1) MEMORY MEMORY (0)
CLEAR/STYLE MEMORY (5) MEMORY (4) LEFT RIGHT REC MEMORY (2) MEMORY (1) BANK/MEMORY
VOICE/
SONG
MELODY
+ 0 - VOICE
/YES /RESET /NO
CATEGORY
STYLE (-)
9 8 7
EASY
SONG
ARRANGER
6 5 4
SONG CATEGORY
(+)
3 2 1
Pattern side(パターン側)
Pattern Pattern
R8
cut cut
17
R8
Fix by bond
(ボンド付け)
Pattern side(パターン側)
PNR: 2NA-WG23530
PNJKSTB(PNJK): 2NA-WG23530
23
PSR-E403
to DMLCD-CN801
ASSIGN
A B
Component side(部品側)
Component side(部品側)
Dial
Component side(部品側)
PNPB: 2NA-WG23570
ENC: 2NA-WG23570
24
PSR-E403
A’ Component side(部品側)
B’
B
to DMLCD-CN402 to 61H-CN3
B’
Component side(部品側)
61H: 2NAKB-V869540
61L: 2NAKB-V869520
25
PSR-E403
TEST PROGRAM
* If the test number 47 “Factory Set” is executed, the data already set will be lost.
1 Preparations
1) Use an AC adaptor PA-3C.
2) Measuring device: Frequency counter, which can detect thousandth value or more, Level meter (with JIS-C filter), Oscilloscope
Note: Use a stereo plug and connect a load resistor of 33 Ω to the [PHONES/OUTPUT] jack for measurement unless
otherwise specified. Input impedance of the measuring device should be 1 MΩ or more.
3) Jig: Foot switch (FC-4 or FC-5), USB cable
C#2 G#2
F2
3 Test procedure
1) When the test program is started, “TEST” will be displayed on the LCD.
2) Press the [–] or [+] button of the number buttons to select a test program item.
3) Press the [START/STOP] button to execute the test.
If the result is OK or test item is completed, press the [START/STOP] button again to return to the item selection display.
Press the [–] or [+] button of the number buttons to select the next test item.
A cursor (“_”) is shown below the first character of the item for which the test results are OK.
If the result is NG, press the lowest key (white key C1) to return to the item selection display.
26
PSR-E403
Other Tests
Popping Noise Check
Connect an oscilloscope to the L/R of the [PHONES/OUTPUT] jack and turn on and then off the [STANDBY/ON] switch. Make
sure that popping noise level is 1.0 Vp-p or less, and that no abnormal sound or popping noise is output from the speakers.
27
PSR-E403
28
PSR-E403
テストプログラム
※テストナンバー 47 の Factory Set を実行すると、設定したデータが失われます。
1 準備
1) AC アダプターは PA-3C を使用します。
2) 測定器: 周波数カウンター(小数点以下 3 桁以上測定可能なもの) 、レベルメーター(JIS-C フィルター使用)、オシロス
コープ
注)特に指示のない限りステレオプラグを用い、[PHONES/OUTPUT]端子に33 Ωの負荷抵抗を接続して測定します。
測定器の入力インピーダンスは 1 M Ω以上であること。
3) 治具:フットスイッチ(FC-4 または FC-5)
、USB ケーブル
2 テストプログラムの起動
[C#2]、[F2]、[G#2]の鍵盤を同時に押しながら、
[STANDBY / ON]スイッチを押します。
C#2 G#2
F2
3 テストの進め方
1)テストプログラムが起動されると、LCD に“TEST”が表示されます。
2)ナンバーボタンの[-]または[+]ボタンを押して、テストプログラムの項目を選択します。
3)[START/STOP]ボタンを押してテストを実行します。
結果が OK、またはテスト項目終了の場合は、再度[START/STOP]ボタンを押して項目選択表示に戻ります。
ナンバーボタンの[-]または [+]ボタンを押して、次のテスト項目を選択します。
テスト結果が OK だった項目名の一字目下にカーソル( “_”)が表示されます。
4 テスト一覧 (dBu=dBm)
テスト No LCD 表示 テスト内容及び判定条件など
1 Version ROM のバージョンを表示します。
001 LCD に“Prog ∗∗∗” 、“USB ∗∗∗”が交互に表示されます。 ∗∗∗ : Version
2 Rom Chk1 CPU のバスに接続されている ROM をチェックします。
002 LCD に“Rom OK”が表示されることを確認します。
3 Ram Chk1 CPU のバスに接続されている RAM をチェックします。
003 LCD に“Ram OK”が表示されることを確認します。
6 FRomChk1 CPU のバスに接続されている FROM をチェックします。
006 LCD に“FRom OK”が表示されることを確認します。
11 TG1 Chk 鍵盤を自動的にスケーリングします。 (発音鍵域は、C2 から G4 までの 32 音です。 )
011 異音、ノイズの無いことを確認します。オートスケーリングが終了すると、 “TG1 End”と
表示され鍵盤を弾くことで発音します。 (単音、先着優先)
13 Pit Chk ピッチ精度のチェック。
013 [PHONES/OUTPUT]端子に周波数カウンタを接続します。 (L か R のどちらか)
正しい信号が出力されていることを確認します。 (440.14 Hz ± 0.22 Hz)
14 Output R [PHONES/OUTPUT]端子の L, R にレベル計(JIS-C フィルタ使用)を接続します。
014 (33 Ω 負荷)
[MASTER VOLUME]を最大にして、出力レベルをチェックします。
・PHONES L: − 55.0 dBu 以下 ・PHONES R: − 5.0 dBu ± 2 dB
15 Output L [PHONES/OUTPUT]端子の L, R にレベル計(JIS-C フィルタ使用)を接続します。
015 (33Ω 負荷)
[MASTER VOLUME]を最大にして、出力レベルをチェックします。
・PHONES L: − 5.0 dBu ± 2 dB ・PHONES R: − 55.0 dBu 以下
29
PSR-E403
その他の検査
ポップノイズチェック
[PHONES/OUTPUT] 端子の L, R にオシロスコープを接続して、
[STANDBY/ON] スイッチをオン、オフします。ポップ
ノイズが 1.0Vp-p 以下であることとスピーカーから異音やポップ音が出ないことを確認します。
ノイズレベルチェック
[PHONES/OUTPUT] 端子の L, R にレベル計(JIS-C フィルタ使用)を接続し、ノイズレベルをチェックします。
・ PHONES L, R: -78dBu 以下
30
PSR-E403
SWテスト項目リスト
順番 SW名 ディスプレイ表示 ノート番号
1 エンコーダーツマミ Dial Up C2
2 エンコーダーツマミ Dial Down C#2
3 TOUCH Touch D2
4 HARMONY Harmony D#2
5 DUAL Dual E2
6 SPLIT Split F2
7 DEMO/PC Demo F#2
8 LESSON START LessonSt G2
9 LESSON L/R L/R G#2
10 ARPEGGIO Arpeggio A2
11 PERFORMANCE ASSISTANT P.A.T. A#2
12 FUNCTION Function B2
13 MUSIC DATABASE M.D.B. C3
14 METRONOME Metro C#3
15 PORTABLE GRAND Piano D3
16 CATEGORY Catego + D#3
17 CATEGORY Catego – E3
18 SONG Song F3
19 EASY SONG ARRANGER E.S.A. F#3
20 STYLE Style G3
21 VOICE Voice G#3
22 TENKEY 1 Tenkey 1 A3
23 TENKEY 2 Tenkey 2 A#3
24 TENKEY 3 Tenkey 3 B3
25 TENKEY 4 Tenkey 4 C4
26 TENKEY 5 Tenkey 5 C#4
27 TENKEY 6 Tenkey 6 D4
28 TENKEY 7 Tenkey 7 D#4
29 TENKEY 8 Tenkey 8 E4
30 TENKEY 9 Tenkey 9 F4
31 TENKEY – Tenkey – F#4
32 TENKEY 0 Tenkey 0 G4
33 TENKEY + Tenkey + G#4
34 ASSIGN Assign A4
35 ACMP ACMP A#4
36 SYNC STOP S. Stop B4
37 SYNC START S. Start C5
38 INTRO/ENDING/rit. Intro C#5
39 MAIN/AUTO FILL Main/Fil D5
40 START/STOP Str/Stp D#5
41 TEMPO/TAP Temp/TAP E5
42 BANK/MEMORY Memory F5
43 REGIST MEMORY 1 Regist 1 F#5
44 REGIST MEMORY 2 Regist 2 G5
45 SONG MEMORY REC Song REC G#5
46 SONG MEMORY (1) RIGHT Song 1 A5
47 SONG MEMORY (2) LEFT Song 2 A#5
48 SONG MEMORY (3) Song 3 B5
49 SONG MEMORY (4) Song 4 C6
50 SONG MEMORY (5) Song 5 C#6
51 SONG MEMORY (A) CLEAR/STYLE Song A D6
52 ロータリーノブA Knob1 Lo
53 ロータリーノブA Knob1 Hi D#6
54 ロータリーノブA Knob1 C
55 ロータリーノブB Knob2 Lo
56 ロータリーノブB Knob2 Hi E6
57 ロータリーノブB Knob2 C
31
PSR-E403
Backup
The following settings are always backed up, and are maintained even when the power is turned off.
If you want to initialize the settings, use the Initialize operation as explained below.
Initialization
This function erases all backup data in the instrument’s flash memory and restores the initial default settings.
The following initialization procedures are provided.
<Backup Clear>
To clear data backed up to the internal flash memory (DM circuit board:
IC206)—panel user setting, registration memory, user songs, style file 156—
turn the power on by pressing the [STANDBY/ON] switch while holding the
highest white key on the keyboard.
“BackUp Clr” is displayed on the LCD, and the backed up data will be erased
and the default values restored.
<Flash Clear>
To clear song data and style files that have been transferred to the internal
flash memory (DM circuit board: IC206) from a computer, turn the power
on by pressing the [STANDBY/ON] switch while simultaneously holding
the highest white key on the keyboard and the three highest black keys.
“Flash Clr” is displayed on the LCD.
When you execute the Flash Clear operation, song data you have purchased will also be cleared. Be sure to save data you
want to keep to a computer.
32
PSR-E403
バックアップと初期化の方法
バックアップ
PSR-E403 の以下のデータは自動的にバックアップされるため、電源を切ってもデータは消えません。
設定を初期化したいときは、下記の「初期化」を行ってください。
バックアップされる内容
・ユーザーソング
・スタイルファイル
・タッチレスポンスオン / オフ (ON/OFF)
・レジストレーションメモリー
・機能設定の各設定:チューニング、スプリットポイント、タッチ感度、スタイル音量、
ソング音量、メトロノーム音量、採点、デモキャンセル、
マスター EQ タイプ、アルペジオベロシティー
初期化
この楽器のフラッシュメモリーにあるソングデータやバックアップデータを消去し、
設定を初期設定
(工場出荷時の状態)
に戻すことを「初期化」と呼びます。初期化は以下の方法で行ってください。
フラッシュクリアすると、購入した有料のソングデータも消去されます。消去したくないデータは、必要に応
じてコンピューターにセーブしましょう。
33
PSR-E403
Default 3 3
Mode Messages x x
Altered ************** x
After Key's x x
Touch Ch's x x
System Exclusive o o
: Song Pos. x x
Common : Song Sel. x x
: Tune x x
System : Clock o o
Real Time: Commands o o
Aux :All Sound OFF x o(120,126,127)
:Reset All Cntrls x o(121)
:Local ON/OFF x o(122)
:All Notes OFF x o(123-125)
Mes- :Active Sense o o
sages:Reset x x
*1 Messages for these control change numbers cannot be transmitted from the
instrument itself. However, they may be transmitted when playing the
accompaniment, song or using the Harmony effect.
■ Effect map
* When a Type LSB value is received that corresponds to no effect type, a value corresponding to the effect type (coming
the closest to the specified value) is automatically set.
* The numbers in parentheses in front of the Effect Type names correspond to the number indicated in the display.
● REVERB
TYPE TYPE LSB
MSB 00 01 02 08 16 17 18 19 20
000 No Effect
001 (01)Hall1 (02)Hall2 (03)Hall3
002 Room (04)Room1 (05)Room2
003 Stage (06)Stage1 (07)Stage2
004 Plate (08)Plate1 (09)Plate2
005...127 No Effect
● CHORUS
TYPE TYPE LSB
MSB 00 01 02 08 16 17 18 19 20
000...063 No Effect
064 Thru
065 Chorus (02)Chorus2
066 Celeste (01)Chorus1
067 Flanger (03)Flanger1 (04)Flanger2
068...127 No Effect
35
PARTS LIST
■ CONTENTS (目次)
OVERALL ASSEMBLY(総組立).............................................................. 2
LOWER CASE ASSEMBLY(下ケースAss’ y).......................................... 5
KEYBOARD ASSEMBLY(16N-C61鍵盤)................................................ 7
ELECTRICAL PARTS (電気部品)..................................................... 8 – 13
WARNING
Components having special characteristics are marked and must be replaced with parts having
specification equal to those originally installed.
印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使
用ください。
■ OVERALL ASSEMBLY(総組立)
Upper case assembly
(上ケースAss'y) 170
10d 470
10d
10e
450
460
Wheel assembly 20 410
(ホイールAss'y)
50 10e
260 270
10d
30 10c
10e
210
240
160 10d
260a 10d
10e
290
260b 110 10a
80 100
210
390 90
190 290
240 180 180b L130
210 20
210 210
L20 130
50
70
L30 60 40
290 210
290 L70 L10
210
180 180a
210 L40 120
L110 210
LCD Unit 280
(液晶ユニット)
L60 180 180a
L50
290 210
250
285 210
185
210
360 285
380b
380a
380c
380
380d 370
Battery cover assembly
(バッテリーカバー Ass'y)
2
PSR-E403
3
PSR-E403
ACCESSORIES 付 属 品
* WH249100 Music Rest 譜 面 立 袋 入
* X7226A00 CD-ROM C D − R O M J
* X7225A00 CD-ROM C D − R O M U,C,W,O
V8028600 AC Adaptor PA-3C J A C ア ダ プ タ ー J
* WF322000 AC Adaptor PA-3C CHN A C ア ダ プ タ ー O
* WG250500 Japanese Guide Sheet 和 文 シ ー ト 袋 入 り J
* WG249900 Chinese Guide Sheet 中 文 シ ー ト 袋 入 り O
4
PSR-E403
200
210
170
220
200
30
50 200
20
Keyboard assembly: See page 7. 40
(16N-C61鍵盤)
L30
L20 L30
L60
L20
L30 10
L70
170
90
80 110
5
PSR-E403
6
PSR-E403
190
200
50
40
180
M30 10
20
160
200
M50 M20 20
150
MK Circuit board assembly
(MKシートAss'y)
30
170
7
PSR-E403
■ ELECTRICAL PARTS(電気部品)
8
PSR-E403
9
PSR-E403
10
PSR-E403
11
PSR-E403
12
PSR-E403
* WF817100 LCD 液 晶 デ ィ ス プ レ イ
13
A B C D E F G H
CN553 (2P)
(LED:4PCS)
61L (C1~B3) 61H (C4~C6) + SPEAKER L
CN4 (12P)
CN3 (12P)
LD751~754 (PNAM1/6)
PA2-PA5 WOOFER
CN752 (3P)
CN764 (3P)
PC0-5,PD0-5 PC0-5,PD0-5
EN/A -
EN/A, EN/B 4Ω 12cm
EN/B
EN/A, EN/B
SW1-36
PA2-PA5
SW37-61 EC761
PB0-PB7
TWL
PF0
(PNAM 5/6,6/6)
B07-B11
B01-B07
CN554 (2P)
CN751 (16P)
- SPEAKER L
CN5 (7P) CN2 (5P) CN1 (12P) CN701 (16P) + TWEETER 2
CN753 (11P)
CN702 (11P)
PF0
EN/A, EN/B
PB0-PB7 PB0-PB7
SW MATRIX
CN402 (7P) CN403 (5P) CN401 (12P) ( SW 20PCS )
PA0-PA2 PA0-PA2
+3.3D SW701~719,721
DMLCD +5D TWR
PNJKSTB
B01-B08
B09-B11
(PNJK) (PNAM5/6,6/6)
PC0-5,PD0-5
CN157 (2P)
CN555 (2P)
PA0-PA7 33LCD
TR701~704 VDD LCD (PNAM3/6) +
PA0-PA7 DRIVER SPEAKER R
DECODER 16 16 DECODER LED DRIVER IC601 DISPLAY TWEETER
74LV138A VCC VCC 74LV138A PF0 RS, ENB -
TR705 (80P) BACK LIGHT
IC401 (16P) IC402 (16P) 36,38
LED:2PCS( Blue ) REGULATOR +6V
+6A
PE3-6
CN556 (2P)
REGULATOR +5V IC151 (3P)
2 1
+ SPEAKER R 3
+5D IC101 (3P) WOOFER
117
+2.5V VDD PB0-PB7 +5A REGULATOR +3.3V
15,46,89,119 - 4Ω 12cm
PA0-PA7 +3.3D IC102 (3P) POWER AMP +V
IOVDD 24,47,66,90,120 RS, ENB
+3.3D 37,121 +6A
REGULATOR +2.5V +6A BA5417
CPU 5
IC103 (3P)
CN156 (13P)
+2.5V L
CN101 (13P)
+V L
+5A +6A +V 2 L
PHONES /
+5D L 12 R
SWL01(T)
CN153 (11P)
CN152 (11P)
IC302 (5P) PC7
14 8 IC551 (15P) R OUTPUT
5 YMW767-VTZ 32 5 R
DAC 11 L 11 R
RESET 4 SD0 3 12 2,3 BUFFER/ 1 L L 4 JK551
16 40 24bit
+3.6V 50ms LPF OTL
IC301 (128P) 42~44
BCLK 1,2,4 9 R 5,6 7 R R 2.5W x 2
41 WCLK IC501 10 IC502(8P) +V +V
X301 RXD1 38 EN/A SYSCK (16P)
7 DC IN 12V
SCLK1 39 EN/B fC=27KHz AC adaptor 4
16.9344MHz 12
R
R
L
L
+3.3D
Crystal SMD-49 13
PA-3B/PA-3C/PA-32
FTolerance±100PPM
/UWRN, /LWRN, /CASN CN551 (5P)
AGND
CN154 (4P) JK151
34~36 32 67,68,123 2
ADC
CN151 (3P)
BCLK PITBEND1
WCLK
1,10 8bit PITBEND2 -
RXD0
PC7 CN552 (5P) CN155 (4P) BATTERY
TXD0 MA01-22
SDI
IC801 PITBEND3 +
1.5V x 6
R
L
IRQ0 MD00-15 9 (10P) 7 MVR PNJKSTB
R
L
MA01-22 MA01-18 MA01-09 (VR 2/4) (STB) "D"size,SUM-1,R-20 or
29,51,52 8 MD00-15 MD00-15 MD00-15 +3.3D VR551 (PNAM 4/6) SW151 excluding batteries
A5kΩ STANDBY/ON
CPU 64M ROM FLASH DRAM /UCAS 1,2,4 14 VBUS, D+, D-
MASTER VOLUME USB
USB ROM 4M /LCAS OR
PROG./ 8,11
IC802 4M 74LV32A PNPB
6.0MHz 12 WAVE 31,32 JK852
Crystal SMD-49
13
(64P) IC203 IC206 IC204 IC207 (14P) SW751 ASSIGN A B
(VR 4/4) 5
F Tolerance±100PPM
6,25,26,30 1,2,4,63,64 (48P) (48P) (44P) AN7
X801 PITCH BEND
CN761 (10P)
CN801 (10P)
CN762 (3P)
CN763 (3P)
VBUS 37 37 1,6,22 PITBEND1
D+ AN1 VR752 VR751 PITBEND2
AN2 +3.3D
D- AN5 AN2 AN0 AN3 AN1 PITBEND3
DGND JK851
AN7 AN3
AN5 RESET PNPB
(VR 1/4) VR761 CN851 (9P)
CN802 (9P)
PSR-E403
PSR-E403 OVERALL CIRCUIT DIAGRAM (DMLCD, ENC, MVR, PNJK, PNPB, PNR, STB, TWL, TWR, 61H, 61L)
1 xx 1
XX
XX
XX
XX
SONG SONG
XX STYLE MEMORY(A) CATEGORY CATEGORY
CLEAR (+) (-)
A XX MEMORY /STYLE
to E-8
2 2
EASY
SONG
STYLE VOICE/
SONG
1 2 3 4 5
XX
SUSTAIN
ARRANGER MEMORY
XX
VOICE
XX
LCD XX 6 7 8 9 - 0 + REGIST MEMORY
/NO /RESET /YES BANK (0)
DRIVER MEMORY SPEAKER R
WOOFER
XX
3 XX SPEAKER R 3
XX
28CC1-2001002840 1
XX
XX
XX
XX PHONES/OUTPUT
XX
28CC1-2001002840 2
4 FLASH ROM 4M 4
DRAM 4M
XX
SYSTEM RESET
CPU DC IN 12V
(SWL01T) XX
REGULATOR +5V
28CC1-2001002840 2
5 5
REGULATOR +3.3V
XX
PNJKSTB
(PNJK)
CPU
(USB) (PNAM 1/6)
TOUCH HARMONY DUAL SPLIT DEMO LESSON LESSON ARPEGGIO
ON/OFF ON/OFF ON/OFF ON/OFF /PC START L/R ON/OFF
OR
REGULATOR +2.5V
OP AMP
DAC
DECODER DECODER
POWER AMP. 5W 2CH
XX
XX
7 7
XX
A OP AMP
XX
from J-2
BYPASS CAPACITORS
28CC1-2001002838 2
8 8
xx
PNJKSTB
(PNJK)
(PNAM 4/6)
ENC
(VR 3/4) REGULATOR +6V
STANDBY/ON
28CC1-2001002840 2
CATEGORY
9 9
61H
(C4~C6) 28CC1-2001002843
SPEAKER L
PNPB MVR WOOFER
(VR 4/4) PITCH BEND (VR 2/4)
to LCD BACK/LIGHT
SPEAKER L
MASTER TWEETER
28CC1-2001002843 VOLUME XX
28CC1-2001002840 2 TWL
(PNAM 5/6,6/6)
10 10
28CC1-2001002840 2
28CC1-8822437 28CC1-2001002843
PNPB
RH5RZ25CA-T1-F (X3679A00) BA33BC0FP (X5889A00) RH5RZ50CA-T1-F (X6959A00) BA60BC0T (X6980A00)
(VR 1/4) REGULATOR +2.5V REGULATOR +3.3V REGULATOR +5V REGULATOR +6V
DMLCD: IC103 DMLCD: IC102 DMLCD: IC101 PNJK: IC151
B
61L : Ceramic Capacitor (セラコンデンサー)
2 : Mylar Capacitor (マイラーコンデンサー)
(C1~B3) : Semiconductive Ceramic Capacitor(半導体セラコンデンサー)
1 1 : Metal Film Resistor(金属被膜抵抗)
2 1 2
3 1. GND 1. INPUT 3 1. GND
A 3 1: INPUT XX : Not installed (未実装)
2. INPUT 2. GND 2. INPUT 1 2: GND
2
11 3. OUTPUT 3. OUTPUT 3. OUTPUT 3 3: OUTPUT 11
Note1 : See parts list for details of circuit board component parts.
2SC2412K(VV556400) 2SA1037AK(VV556500) DTC123JKA (VY677600)
TRANSISTOR TRANSISTOR DIGITAL TRANSISTOR Note2 : The large numbers with function are indicated the first digit of each parts
DMLCD: TR802 DMLCD: TR801 DMLCD: TR705 reference number.
ASSIGN 3 3 3
注 1: シート部品詳細は、パーツリストをご参照ください。
注 2: 機能名付の大きな数字は、各部品ロケーション番号の一桁目を表わします。
2
1
2 1 2 1 WARNING
R1 OUT
3 3 IN Components having special characteristics are marked and must be replaced with parts having
1: GND
2 1: EMITTER 2 1: EMITTER
R2 specifications equel to those originally installed.
GND 2: IN
28CC1-2001002843 2: BASE 2: BASE IN OUT
28CC1-8822436 1 3: COLLECTOR 1 3: COLLECTOR GND
3: OUT
安全上の注意
印の部品は、安全を維持するために重要な部品です。
12 12
交換する場合は、安全のため必ず指定の部品をご使用ください。
PSR-E403 PSR-E403
A B C D E F G H I J K L M N O P Q