Dubravka Kusmic sent an email informing recipients of changes to incoming inspection quality plans. The changes reduce inspection requirements for certain screws, pins, and other parts received from specific suppliers. Parts will still be identified and logged but several measurement tests will no longer need to be performed, reducing inspection workload while maintaining product traceability.
Dubravka Kusmic sent an email informing recipients of changes to incoming inspection quality plans. The changes reduce inspection requirements for certain screws, pins, and other parts received from specific suppliers. Parts will still be identified and logged but several measurement tests will no longer need to be performed, reducing inspection workload while maintaining product traceability.
Dubravka Kusmic sent an email informing recipients of changes to incoming inspection quality plans. The changes reduce inspection requirements for certain screws, pins, and other parts received from specific suppliers. Parts will still be identified and logged but several measurement tests will no longer need to be performed, reducing inspection workload while maintaining product traceability.
To: Jenny Persad; Prafulla Gandhi; Tim Stiltz; Wendy Yuen-Fan Cc: Michel Hodak Subject: incoming inspection quality plan adjustment
The pins received from BEAD Industries are added, please see in red
IMPORTANT
Incoming inspection quality plans reduction
Here are the changes in incoming inspection plans from today
1. All screws from WECO-D identify and log
2. All TBY from WECO-D identify and log 3. All plated pins except PIN 110-020 identify, do solderability test and log (do not measure diameters) 4. All TBY980, 982, 983 identify and log (do not measure torque to failure) 5. MLD950NLFL all sizes identify and log (do not measure the foot and ledge dimensions) 6. All pins received from BEAD Industries identify and log
My best regards
Dubravka Pavljasevic Kusmic, P Eng
Reliability Engineer
WECO Electrical Connectors Inc.
Konvar Interconnect Products Inc. 19900 Clark Graham Baie D'Urfé, QC, Canada H9X 3R8 Tel. : (514) 457-7257 ext. 274 Fax: (514) 694-0956 E-mail: dkusmic@weco.ca Internet: www.weco.ca
Engineering Equipment for Foundries: Proceedings of the Seminar on Engineering Equipment for Foundries and Advanced Methods of Producing Such Equipment, Organized by the United Nations Economic Commission for Europe