Professional Documents
Culture Documents
WB Herbst Aktion PDF
WB Herbst Aktion PDF
WB Herbst Aktion PDF
AUTUMN OFFERS
Valid from 22.10. to 31.12.2019
Start the autumn with
attractive price advantages
4
CLAMPING EQUIPMENT
From 22.10. to 31.12.2019 we offer
you selected autumn special offers from
the entire workshop equipment range.
13
LIFTING EQUIPMENT
14
CUTTING TOOLS
36
SURFACE FINISHING EQUIPMENT
39
MEASURING EQUIPMENT
43
ASSEMBLY EQUIPMENT
46
CONSUMABLES
PROTECTIVE EQUIPMENT 48
CLAMPING EQUIPMENT
CLAMPING EQUIPMENT
PRODUCT DESCRIPTION
ff Version R with regulator for presetting the clamping force
ff 100% utilisation of the clamping force through centrally positioned spindle with
mechanical high-pressure amplifier
ff High stability through monoblock body from GGG-70 ductile cast iron
ff Highest precision through hardened and ground slides
ff Accuracy of 0.01 mm in clamping repeatability
PRODUCT DESCRIPTION
ff Suitable for HWS 500
No. EUR
4
CLAMPING EQUIPMENT
PRODUCT DESCRIPTION
ff Version R with regulator for presetting the clamping force
ff All surfaces ground with a parallelism of 0.02 mm, therefore ideal for horizontal
and vertical machining
ff Compact and stable monoblock body from GGG-70 which maintains its total
length
ff Easy to clean through fully enclosed spindleand additional side window
ff Accuracy of 0.01 mm in clamping repeatability
TOP JAW, PLAIN, FOR HWS 600 TOP JAW, PLAIN / SERRATED / WITH CLAWS FOR HWS 600
HWS 6002 HWS 6004
125 HWS 6002/125 121.00 89.00 125 HWS 6004/125 261.00 189.00
160 HWS 6002/160 141.00 104.00 160 HWS 6004/160 275.00 199.00
PRODUCT DESCRIPTION
ff Version R with regulator for presetting the clamping force
ff Compact and stable body from GGG-70 which maintains its total length
ff Easy to clean through fully enclosed spindleand additional side window
ff Accuracy of 0.01 mm in clamping repeatability
5
CLAMPING EQUIPMENT
MATERIAL MATERIAL
ff 1.2510 hardened ff 1.2510 hardened
125 HWS 5602/125 59.90 44.00 125 HWS 5604/125 91.00 67.00
160 HWS 5602/160 77.20 56.00 160 HWS 5604/160 116.60 86.00
MATERIAL MATERIAL
ff 1.2510 hardened ff 1.2510
125 HWS 5606/125 160.60 118.00 125 HWS 5608/125 52.40 39.00
160 HWS 5606/160 186.20 136.00 160 HWS 5608/160 67.40 49.00
PRODUCT DESCRIPTION
ff Suitable for HWS 500, HWS 600,
HWS 650 and HWS 6502
MATERIAL
ff 1.2510 hardened
6
CLAMPING EQUIPMENT
PRODUCT DESCRIPTION
ff Precision-ground in pairs to hold workpieces parallelly in place
MATERIAL
ff Steel, case-hardened
PRODUCT DESCRIPTION
ff Clamping tool set especially designed for tool machines with T-slotted tables
ff Contains all necessary elements for fast clamping of tools, jigs or other
workpieces
MATERIAL
ff Tempered steel
M b1 No. EUR
7
CLAMPING EQUIPMENT
PRODUCT DESCRIPTION
ff Easy positioning of each clamping element
ff Quick clamping of injection moulds onto injection moulding machines
ff Robust design made from forged and tempered steel
16 M10 HWS 100/16/10 177.40 106.00 25 M18 HWS 100/25/18 212.50 126.00
16 M12 HWS 100/16/12 182.10 109.00 25 M20 HWS 100/25/20 216.10 129.00
20 M12 HWS 100/20/12 193.60 116.00 55 M20 HWS 100/55/20 384.40 229.00
20 M16 HWS 100/20/16 196.90 119.00 55 M24 HWS 100/55/24 390.00 234.00
PRODUCT DESCRIPTION
ff Easy positioning of each clamping element
ff Quick clamping of plates on a workbench with T-grooves
ff Robust design made from forged and tempered steel
16 M12 14 HWS 102/16/12/14 182.10 109.00 25 M16 18 HWS 102/25/16/18 216.80 129.00
16 M12 16 HWS 102/16/12/16 185.50 109.00 25 M16 22 HWS 102/25/16/22 223.60 134.00
16 M12 18 HWS 102/16/12/18 188.90 114.00 25 M16 24 HWS 102/25/16/24 226.30 136.00
20 M12 14 HWS 102/20/12/14 198.00 119.00 55 M20 22 HWS 102/55/20/22 390.00 229.00
20 M12 16 HWS 102/20/12/16 200.40 119.00 55 M20 24 HWS 102/55/20/24 395.50 234.00
8
CLAMPING EQUIPMENT
ELECTRODE HOLDER WITH TOP PLATE, BRASS ELECTRODE HOLDER WITH TOP PLATE, ALUMINIUM
HER 1452 HER 1652
ITS-50 ITS-50
MATERIAL MATERIAL
ff 2.0401 ff 3.3547
ELECTRODE HOLDER WITH GROOVE, BRASS ELECTRODE HOLDER WITH GROOVE, ALUMINIUM
HER 1442 HER 1642
ITS-50 ITS-50
MATERIAL MATERIAL
ff 2.0401 ff 3.3547
9
CLAMPING EQUIPMENT
ITS-50 ITS-50
MATERIAL MATERIAL
ff 2.0401 ff 3.3547
ITS-50
PRODUCT DESCRIPTION
ff Compatible with ITS-50
MATERIAL
ff Head: 1.2083, Base: 2.0401
b2 No. EUR
CLAMPING SPIGOT WITH RINSE HOLE QUICK-ACTION CLAMPING CHUCK FOR ITS-50, HAND CHUCK
HER 1810 HER 3010
10
EDM ACCESSORIES
EDM ACCESSORIES
MATERIAL
ff 2.0321 (CuZn37)
0.3 400 20 V 93240/ 0,3 x 400 21.40 14.30 1.5 400 20 V 93240/ 1,5 x 400 23.60 15.80
0.4 300 20 V 93240/ 0,4 x 300 17.90 12.00 1.6 300 20 V 93240/ 1,6 x 300 22.10 14.80
0.4 400 20 V 93240/ 0,4 x 400 21.40 14.30 1.6 400 20 V 93240/ 1,6 x 400 26.50 17.80
0.5 300 20 V 93240/ 0,5 x 300 17.90 12.00 1.8 300 20 V 93240/ 1,8 x 300 22.10 14.80
0.5 400 20 V 93240/ 0,5 x 400 21.40 14.30 1.8 400 20 V 93240/ 1,8 x 400 26.50 17.80
0.6 300 20 V 93240/ 0,6 x 300 17.90 12.00 2 300 20 V 93240/ 2,0 x 300 22.10 14.80
0.6 400 20 V 93240/ 0,6 x 400 21.40 14.30 2 400 20 V 93240/ 2,0 x 400 26.50 17.80
0.7 300 20 V 93240/ 0,7 x 300 17.90 12.00 2.2 300 10 V 93240/ 2,2 x 300 15.50 10.40
0.7 400 20 V 93240/ 0,7 x 400 21.40 14.30 2.2 400 10 V 93240/ 2,2 x 400 18.60 12.50
0.8 300 20 V 93240/ 0,8 x 300 17.90 12.00 2.4 300 10 V 93240/ 2,4 x 300 15.50 10.40
0.8 400 20 V 93240/ 0,8 x 400 21.40 14.30 2.4 400 10 V 93240/ 2,4 x 400 18.60 12.50
0.9 300 20 V 93240/ 0,9 x 300 17.90 12.00 2.5 300 10 V 93240/ 2,5 x 300 15.50 10.40
0.9 400 20 V 93240/ 0,9 x 400 21.40 14.30 2.5 400 10 V 93240/ 2,5 x 400 18.60 12.50
1 300 20 V 93240/ 1,0 x 300 17.90 12.00 2.6 300 10 V 93240/ 2,6 x 300 15.50 10.40
1 400 20 V 93240/ 1,0 x 400 21.40 14.30 2.6 400 10 V 93240/ 2,6 x 400 18.60 12.50
1.2 300 20 V 93240/ 1,2 x 300 17.80 11.90 2.8 300 10 V 93240/ 2,8 x 300 15.50 10.40
1.2 400 20 V 93240/ 1,2 x 400 21.50 14.40 2.8 400 10 V 93240/ 2,8 x 400 18.60 12.50
1.4 300 20 V 93240/ 1,4 x 300 17.80 11.90 3 300 10 V 93240/ 3,0 x 300 22.70 15.20
1.4 400 20 V 93240/ 1,4 x 400 21.50 14.40 3 400 10 V 93240/ 3,0 x 400 26.90 18.00
11
EDM ACCESSORIES
MATERIAL
ff 2.0060 (E-Cu 57)
B L H No. EUR
MATERIAL
ff Graphite Q70, Q60, Q40
10 10 500 V 92321/ 10/500 14.40 9.60 V 92324/ 10/500 16.60 11.10 V 92327/ 10/500 22.20 14.90
15 15 500 V 92321/ 15/500 19.20 12.90 V 92324/ 15/500 23.80 15.90 V 92327/ 15/500 34.90 23.40
20 20 500 V 92321/ 20/500 25.90 17.40 V 92324/ 20/500 32.10 21.50 V 92327/ 20/500 50.90 34.10
25 25 500 V 92321/ 25/500 34.90 23.40 V 92324/ 25/500 43.90 29.40 V 92327/ 25/500 73.20 49.00
30 30 500 V 92321/ 30/500 43.60 29.20 V 92324/ 30/500 56.90 38.10 V 92327/ 30/500 95.80 64.20
12
LIFTING EQUIPMENT
LIFTING EQUIPMENT
PRODUCT DESCRIPTION
ff Suitable for lifting flat and round material
ff Safety factor: >3
ff Neodymium magnets ensure high lifting capacity
kg max. FM1) No. EUR
13
CUTTING TOOLS
CUTTING TOOLS
CARBIDE ROUGH / FINISH MILLING CUTTER FOR HARD MACHINING, LONG WZF 125487
PRODUCT DESCRIPTION
ff High-performance milling cutter for hard machining with non-uniform pitch, core
stability and centre cut
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN coated
d No. EUR
14
CUTTING TOOLS
CARBIDE FINISH MILLING CUTTER FOR HARD MACHINING, LONG WZF 13546
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for fine finishing
MATERIAL
ff Carbide, TiAlN multi-layer coated
CARBIDE FINISHING CUTTER WITH RADIUS, FOR HARD MACHINING, LONG WZF 135461
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for fine finishing
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
3 0.3 WZF 135461/ 3 /0,3 55.50 33.30 10 0.5 WZF 135461/10 /0,5 80.00 48.00
4 0.4 WZF 135461/ 4 /0,4 54.50 32.70 10 1 WZF 135461/10 /1,0 80.00 48.00
5 0.5 WZF 135461/ 5 /0,5 57.20 34.30 10 1.5 WZF 135461/10 /1,5 80.00 48.00
6 0.5 WZF 135461/ 6 /0,5 57.20 34.30 12 0.5 WZF 135461/12 /0,5 100.60 60.40
6 1 WZF 135461/ 6 /1,0 57.20 34.30 12 1 WZF 135461/12 /1,0 100.60 60.40
8 0.5 WZF 135461/ 8 /0,5 68.10 40.90 12 1.5 WZF 135461/12 /1,5 100.60 60.40
8 1 WZF 135461/ 8 /1,0 68.10 40.90 16 1 WZF 135461/16 /1,0 152.50 91.50
8 1.5 WZF 135461/ 8 /1,5 68.10 40.90 16 2 WZF 135461/16 /2,0 152.50 91.50
15
CUTTING TOOLS
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for fine finishing
MATERIAL
ff Carbide, TiAlN multi-layer coated
CARBIDE 3D TORUS MILLING CUTTER FOR HARD MACHINING, LONG WZF 17576
high -7°
40 - 63
speed
HRC R
cutting 30° Z
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
0.5 0.1 WZF 17576/ 0,5/0,1 40.10 24.10 8 0.5 WZF 17576/ 8 /0,5 54.60 32.80
1 0.2 WZF 17576/ 1 /0,2 40.10 24.10 8 1 WZF 17576/ 8 /1 54.60 32.80
2 0.2 WZF 17576/ 2 /0,2 40.10 24.10 8 1.5 WZF 17576/ 8 /1,5 54.60 32.80
2 0.5 WZF 17576/ 2 /0,5 40.10 24.10 8 2 WZF 17576/ 8 /2 54.60 32.80
3 0.3 WZF 17576/ 3 /0,3 41.10 24.70 10 0.5 WZF 17576/10 /0,5 67.70 40.60
3 0.5 WZF 17576/ 3 /0,5 41.10 24.70 10 1 WZF 17576/10 /1 67.70 40.60
4 0.3 WZF 17576/ 4 /0,3 47.50 28.50 10 1.5 WZF 17576/10 /1,5 67.70 40.60
4 0.5 WZF 17576/ 4 /0,5 47.50 28.50 10 2 WZF 17576/10 /2 67.70 40.60
5 0.3 WZF 17576/ 5 /0,3 45.70 27.40 12 0.5 WZF 17576/12 /0,5 87.90 52.70
5 0.5 WZF 17576/ 5 /0,5 45.70 27.40 12 1 WZF 17576/12 /1 87.90 52.70
6 0.3 WZF 17576/ 6 /0,3 38.90 23.30 12 1.5 WZF 17576/12 /1,5 87.90 52.70
6 0.5 WZF 17576/ 6 /0,5 38.90 23.30 12 2 WZF 17576/12 /2 87.90 52.70
6 1.5 WZF 17576/ 6 /1,5 38.90 23.30 16 3 WZF 17576/16 /3 159.00 95.40
16
CUTTING TOOLS
high -7°
40 - 63
speed
HRC R
cutting 30° Z
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
0.5 0.1 WZF 17586/ 0,5/0,1 48.30 29.00 8 0.5 WZF 17586/ 8 /0,5 65.50 39.30
1 0.2 WZF 17586/ 1 /0,2 48.30 29.00 8 1 WZF 17586/ 8 /1 65.50 39.30
2 0.2 WZF 17586/ 2 /0,2 48.30 29.00 8 1.5 WZF 17586/ 8 /1,5 65.50 39.30
2 0.5 WZF 17586/ 2 /0,5 48.30 29.00 8 2 WZF 17586/ 8 /2 65.50 39.30
3 0.3 WZF 17586/ 3 /0,3 47.20 28.30 10 0.5 WZF 17586/10 /0,5 76.70 46.00
3 0.5 WZF 17586/ 3 /0,5 47.20 28.30 10 1 WZF 17586/10 /1 76.70 46.00
4 0.3 WZF 17586/ 4 /0,3 47.20 28.30 10 1.5 WZF 17586/10 /1,5 76.70 46.00
4 0.5 WZF 17586/ 4 /0,5 47.20 28.30 10 2 WZF 17586/10 /2 76.70 46.00
5 0.3 WZF 17586/ 5 /0,3 45.70 27.40 12 0.5 WZF 17586/12 /0,5 97.60 58.60
5 0.5 WZF 17586/ 5 /0,5 45.70 27.40 12 1 WZF 17586/12 /1 97.60 58.60
6 0.3 WZF 17586/ 6 /0,3 39.40 23.60 12 1.5 WZF 17586/12 /1,5 97.60 58.60
6 0.5 WZF 17586/ 6 /0,5 39.40 23.60 12 2 WZF 17586/12 /2 97.60 58.60
6 1.5 WZF 17586/ 6 /1,5 39.40 23.60 16 3 WZF 17586/16 /3 157.40 94.40
CARBIDE 3D FULL-RADIUS MILLING CUTTER FOR HARD MACHINING, SHORT WZF 18516
high -7°
50 - 63
speed
HRC
cutting 30° 2 R
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
0.5 WZF 18516/ 0,5 33.20 19.90 5 WZF 18516/ 5 38.00 22.80
0.8 WZF 18516/ 0,8 33.20 19.90 6 WZF 18516/ 6 39.20 23.50
1.5 WZF 18516/ 1,5 29.80 17.90 10 WZF 18516/10 63.30 38.00
17
CUTTING TOOLS
CARBIDE 3D FULL-RADIUS MILLING CUTTER FOR HARD MACHINING, SEMI-LONG WZF 18526
high -7°
50 - 63
speed
HRC
cutting 30° 2 R
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
CARBIDE 3D FULL-RADIUS MILLING CUTTER FOR HARD MACHINING, SHORT WZF 18518
high -7°
50 - 63
speed
HRC
cutting 30° 4 R
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
CARBIDE 3D FULL-RADIUS MILLING CUTTER FOR HARD MACHINING, SEMI-LONG WZF 18528
high -7°
50 - 63
speed
HRC
cutting 30° 4 R
PRODUCT DESCRIPTION
ff High-performance milling cutter with centre cut for 3D hard machining
ff Relieved behind the cutting edge
MATERIAL
ff Carbide, TiAlN multi-layer coated
18
CUTTING TOOLS
19
CUTTING TOOLS
CARBIDE 3D TORUS MILLING CUTTER FOR HARD MACHINING, RELIEVED WZF 27596
high 0°
speed
cutting
40 - 63
HRC µ 2 R
30°
PRODUCT DESCRIPTION
ff High-performance milling cutter for high-speed cutting
ff Ultimate precision in the µ range
ff With precision-ground, robust cutting edges
MATERIAL
ff Carbide, AlCrN coated
0.2 0.7 0.05 WZF 27596/0,2/ 0,7/0,05 60.60 39.40 2 6 0.2 WZF 27596/2 / 6 /0,2 53.50 34.80
0.2 1 0.05 WZF 27596/0,2/ 1 /0,05 60.60 39.40 2 8 0.2 WZF 27596/2 / 8 /0,2 53.50 34.80
0.3 1 0.05 WZF 27596/0,3/ 1 /0,05 57.50 37.40 2 10 0.2 WZF 27596/2 /10 /0,2 53.50 34.80
0.3 2 0.05 WZF 27596/0,3/ 2 /0,05 57.50 37.40 2 12 0.2 WZF 27596/2 /12 /0,2 54.30 35.30
0.4 1.2 0.05 WZF 27596/0,4/ 1,2/0,05 57.50 37.40 2 16 0.2 WZF 27596/2 /16 /0,2 54.30 35.30
0.4 2 0.05 WZF 27596/0,4/ 2 /0,05 57.50 37.40 2 20 0.2 WZF 27596/2 /20 /0,2 55.00 35.80
0.5 1.3 0.05 WZF 27596/0,5/ 1,3/0,05 55.60 36.10 2 25 0.2 WZF 27596/2 /25 /0,2 55.00 35.80
0.5 2.5 0.05 WZF 27596/0,5/ 2,5/0,05 55.60 36.10 2 4 0.5 WZF 27596/2 / 4 /0,5 53.50 34.80
0.5 4.5 0.05 WZF 27596/0,5/ 4,5/0,05 55.60 36.10 2 6 0.5 WZF 27596/2 / 6 /0,5 53.50 34.80
0.6 1.5 0.05 WZF 27596/0,6/ 1,5/0,05 54.30 35.30 2 8 0.5 WZF 27596/2 / 8 /0,5 53.50 34.80
0.6 3 0.05 WZF 27596/0,6/ 3 /0,05 54.30 35.30 2 10 0.5 WZF 27596/2 /10 /0,5 53.50 34.80
0.8 2 0.08 WZF 27596/0,8/ 2 /0,08 54.30 35.30 2 12 0.5 WZF 27596/2 /12 /0,5 54.30 35.30
0.8 5 0.08 WZF 27596/0,8/ 5 /0,08 54.30 35.30 2 20 0.5 WZF 27596/2 /20 /0,5 55.00 35.80
0.8 8 0.08 WZF 27596/0,8/ 8 /0,08 54.30 35.30 2.5 8 0.25 WZF 27596/2,5/ 8 /0,25 57.50 37.40
1 2.5 0.1 WZF 27596/1 / 2,5/0,1 52.40 34.10 2.5 12 0.25 WZF 27596/2,5/12 /0,25 57.50 37.40
1 3 0.1 WZF 27596/1 / 3 /0,1 52.40 34.10 2.5 16 0.25 WZF 27596/2,5/16 /0,25 57.50 37.40
1 4 0.1 WZF 27596/1 / 4 /0,1 52.40 34.10 2.5 20 0.25 WZF 27596/2,5/20 /0,25 57.50 37.40
1 6 0.1 WZF 27596/1 / 6 /0,1 52.40 34.10 3 6 0.3 WZF 27596/3 / 6 /0,3 57.50 37.40
1 8 0.1 WZF 27596/1 / 8 /0,1 52.40 34.10 3 12 0.3 WZF 27596/3 /12 /0,3 57.50 37.40
1 12 0.1 WZF 27596/1 /12 /0,1 54.30 35.30 3 16 0.3 WZF 27596/3 /16 /0,3 57.50 37.40
1 2.5 0.2 WZF 27596/1 / 2,5/0,2 52.40 34.10 3 20 0.3 WZF 27596/3 /20 /0,3 57.50 37.40
1 4 0.2 WZF 27596/1 / 4 /0,2 52.40 34.10 3 25 0.3 WZF 27596/3 /25 /0,3 60.00 39.00
1 5 0.2 WZF 27596/1 / 5 /0,2 52.40 34.10 3 6 0.5 WZF 27596/3 / 6 /0,5 57.50 37.40
1 6 0.2 WZF 27596/1 / 6 /0,2 52.40 34.10 3 12 0.5 WZF 27596/3 /12 /0,5 57.50 37.40
1 8 0.2 WZF 27596/1 / 8 /0,2 52.40 34.10 3 15 0.5 WZF 27596/3 /15 /0,5 57.50 37.40
1 10 0.2 WZF 27596/1 /10 /0,2 52.40 34.10 3 20 0.5 WZF 27596/3 /20 /0,5 57.50 37.40
1 12 0.2 WZF 27596/1 /12 /0,2 54.30 35.30 4 15 0.4 WZF 27596/4 /15 /0,4 57.50 37.40
1.2 3 0.1 WZF 27596/1,2/ 3 /0,1 54.30 35.30 4 20 0.4 WZF 27596/4 /20 /0,4 57.50 37.40
1.2 5 0.1 WZF 27596/1,2/ 5 /0,1 54.30 35.30 4 10 0.5 WZF 27596/4 /10 /0,5 57.50 37.40
1.2 8 0.1 WZF 27596/1,2/ 8 /0,1 54.30 35.30 4 20 0.5 WZF 27596/4 /20 /0,5 57.50 37.40
1.5 4 0.15 WZF 27596/1,5/ 4 /0,15 53.50 34.80 4 30 0.5 WZF 27596/4 /30 /0,5 59.10 38.40
1.5 6 0.15 WZF 27596/1,5/ 6 /0,15 53.50 34.80 5 10 0.5 WZF 27596/5 /10 /0,5 57.50 37.40
1.5 8 0.15 WZF 27596/1,5/ 8 /0,15 53.50 34.80 5 20 0.5 WZF 27596/5 /20 /0,5 57.50 37.40
1.5 10 0.15 WZF 27596/1,5/10 /0,15 53.50 34.80 5 25 0.5 WZF 27596/5 /25 /0,5 57.50 37.40
1.5 12 0.15 WZF 27596/1,5/12 /0,15 54.30 35.30 5 30 0.5 WZF 27596/5 /30 /0,5 60.00 39.00
1.5 15 0.15 WZF 27596/1,5/15 /0,15 54.30 35.30 6 10 0.6 WZF 27596/6 /10 /0,6 57.50 37.40
1.5 10 0.3 WZF 27596/1,5/10 /0,3 53.50 34.80 6 30 0.6 WZF 27596/6 /30 /0,6 60.00 39.00
20
CUTTING TOOLS
CARBIDE 3D FULL-RADIUS MILLING CUTTER FOR HARD MACHINING, RELIEVED WZF 28596
high 0°
speed
cutting
50 - 63
HRC µ 2 R
30°
PRODUCT DESCRIPTION
ff With precision-ground, robust cutting edges
ff Ultimate precision in the µ range
ff High-performance milling cutter for high-speed cutting
MATERIAL
ff Carbide, AlCrN coated
0.2 0.6 WZF 28596/0,2/ 0,6 60.60 39.40 1.5 15 WZF 28596/1,5/15 54.30 35.30
0.3 1 WZF 28596/0,3/ 1 57.50 37.40 1.5 20 WZF 28596/1,5/20 55.00 35.80
0.5 1.3 WZF 28596/0,5/ 1,3 55.60 36.10 2 8 WZF 28596/2 / 8 53.50 34.80
0.5 2.5 WZF 28596/0,5/ 2,5 55.60 36.10 2 10 WZF 28596/2 /10 54.30 35.30
0.5 3.5 WZF 28596/0,5/ 3,5 55.60 36.10 2 12 WZF 28596/2 /12 54.30 35.30
0.5 4.5 WZF 28596/0,5/ 4,5 55.60 36.10 2 16 WZF 28596/2 /16 54.30 35.30
0.5 8.5 WZF 28596/0,5/ 8,5 55.60 36.10 2 18 WZF 28596/2 /18 55.00 35.80
0.6 2.5 WZF 28596/0,6/ 2,5 55.60 36.10 2 20 WZF 28596/2 /20 55.00 35.80
0.6 3.5 WZF 28596/0,6/ 3,5 55.60 36.10 3 6 WZF 28596/3 / 6 57.50 37.40
0.6 4.5 WZF 28596/0,6/ 4,5 55.60 36.10 3 8 WZF 28596/3 / 8 57.50 37.40
0.6 6.5 WZF 28596/0,6/ 6,5 55.60 36.10 3 12 WZF 28596/3 /12 57.50 37.40
0.6 11.5 WZF 28596/0,6/11,5 57.40 37.30 3 15 WZF 28596/3 /15 57.50 37.40
0.8 2 WZF 28596/0,8/ 2 54.30 35.30 3 16 WZF 28596/3 /16 57.50 37.40
0.8 5 WZF 28596/0,8/ 5 54.30 35.30 3 20 WZF 28596/3 /20 57.50 37.40
0.8 8 WZF 28596/0,8/ 8 54.30 35.30 3 25 WZF 28596/3 /25 60.00 39.00
0.8 10 WZF 28596/0,8/10 54.30 35.30 4 10 WZF 28596/4 /10 57.50 37.40
0.8 12 WZF 28596/0,8/12 54.30 35.30 4 15 WZF 28596/4 /15 57.50 37.40
1 2.5 WZF 28596/1 / 2,5 52.40 34.10 4 20 WZF 28596/4 /20 57.50 37.40
1 10 WZF 28596/1 /10 52.40 34.10 6 18 WZF 28596/6 /18 57.50 37.40
1 12 WZF 28596/1 /12 54.30 35.30 6 20 WZF 28596/6 /20 57.50 37.40
1.5 4 WZF 28596/1,5/ 4 53.50 34.80 6 25 WZF 28596/6 /25 60.00 39.00
1.5 6 WZF 28596/1,5/ 6 53.50 34.80 6 30 WZF 28596/6 /30 60.00 39.00
1.5 8 WZF 28596/1,5/ 8 53.50 34.80 6 35 WZF 28596/6 /35 61.60 40.00
1.5 10 WZF 28596/1,5/10 53.50 34.80 8 24 WZF 28596/8 /24 77.50 50.40
21
CUTTING TOOLS
< 1.400
12 x d
N/mm²
135°
PRODUCT DESCRIPTION
ff High-performance drill with parabolic slot profile
MATERIAL
ff Carbide, TiAlN multi-layer coated
3 WZB 10227/ 3 106.50 63.90 5.5 WZB 10227/ 5,5 106.50 63.90 9 WZB 10227/ 9 199.40 119.60
3.3 WZB 10227/ 3,3 106.50 63.90 5.8 WZB 10227/ 5,8 106.50 63.90 10 WZB 10227/10 199.40 119.60
3.5 WZB 10227/ 3,5 106.50 63.90 6 WZB 10227/ 6 106.50 63.90 10.5 WZB 10227/10,5 254.80 152.90
4 WZB 10227/ 4 106.50 63.90 6.5 WZB 10227/ 6,5 156.60 94.00 11 WZB 10227/11 254.80 152.90
4.2 WZB 10227/ 4,2 106.50 63.90 6.8 WZB 10227/ 6,8 152.30 91.40 12 WZB 10227/12 254.80 152.90
4.5 WZB 10227/ 4,5 106.50 63.90 7 WZB 10227/ 7 152.30 91.40 13 WZB 10227/13 324.10 194.50
5 WZB 10227/ 5 106.50 63.90 8 WZB 10227/ 8 152.30 91.40 14 WZB 10227/14 324.10 194.50
5.2 WZB 10227/ 5,2 106.50 63.90 8.5 WZB 10227/ 8,5 199.40 119.60 16 WZB 10227/16 432.50 259.50
< 1.400
20 x d
N/mm²
135°
PRODUCT DESCRIPTION
ff High-performance drill with parabolic slot profile
MATERIAL
ff Carbide, TiAlN coated
3 WZB 10229/ 3 129.10 83.90 6 WZB 10229/ 6 204.80 133.10 10 WZB 10229/10 320.20 208.10
3.5 WZB 10229/ 3,5 156.30 101.60 6.5 WZB 10229/ 6,5 260.10 169.10 11 WZB 10229/11 429.00 278.90
4 WZB 10229/ 4 156.30 101.60 7 WZB 10229/ 7 260.10 169.10 12 WZB 10229/12 429.60 279.20
4.5 WZB 10229/ 4,5 177.10 115.10 8 WZB 10229/ 8 260.10 169.10 14 WZB 10229/14 558.40 363.00
5 WZB 10229/ 5 177.10 115.10 8.5 WZB 10229/ 8,5 315.60 205.10
5.5 WZB 10229/ 5,5 204.80 133.10 9 WZB 10229/ 9 315.60 205.10
< 1.400
25 x d
N/mm²
135°
PRODUCT DESCRIPTION
ff High-performance drill with parabolic slot profile
MATERIAL
ff Carbide, TiAlN coated
3 WZB 10231/ 3 180.90 117.60 6 WZB 10231/ 6 274.70 178.60 9 WZB 10231/ 9 429.20 279.00
3.5 WZB 10231/ 3,5 197.40 128.30 6.5 WZB 10231/ 6,5 290.10 188.60 10 WZB 10231/10 429.20 279.00
4 WZB 10231/ 4 197.40 128.30 7 WZB 10231/ 7 290.10 188.60 12 WZB 10231/12 492.00 319.80
22
CUTTING TOOLS
< 1.400
30 x d
N/mm²
135°
PRODUCT DESCRIPTION
ff High-performance drill with parabolic slot profile
MATERIAL
ff Carbide, TiAlN coated
3 WZB 10233/ 3 212.90 138.40 5 WZB 10233/ 5 274.70 178.60 8 WZB 10233/ 8 412.60 268.20
3.5 WZB 10233/ 3,5 231.70 150.60 6 WZB 10233/ 6 319.90 207.90 10 WZB 10233/10 462.20 300.40
4 WZB 10233/ 4 231.70 150.60 6.5 WZB 10233/ 6,5 347.40 225.80
4.5 WZB 10233/ 4,5 274.70 178.60 7 WZB 10233/ 7 347.40 225.80
CARBIDE DRILL WITHOUT INNER COOLANT SUPPLY, FOR HARDENED STEEL WZB 10253
48 - 63 DIN
HRC 6537.2
120°
PRODUCT DESCRIPTION
ff High stability
ff Optimal chip-breaking and short chips
ff For hardened materials up to 63 HRC
MATERIAL
ff Carbide, TiAlN multi-layer coated
2.6 WZB 10253/ 2,6 49.00 27.00 5.6 WZB 10253/ 5,6 60.00 33.00 10 WZB 10253/10 130.90 72.00
3 WZB 10253/ 3 51.70 28.40 6 WZB 10253/ 6 71.50 39.30 10.4 WZB 10253/10,4 130.90 72.00
3.4 WZB 10253/ 3,4 51.70 28.40 6.9 WZB 10253/ 6,9 71.50 39.30 10.6 WZB 10253/10,6 130.90 72.00
4 WZB 10253/ 4 54.40 29.90 7.1 WZB 10253/ 7,1 71.50 39.30 11.1 WZB 10253/11,1 170.00 93.50
4.3 WZB 10253/ 4,3 54.40 29.90 8 WZB 10253/ 8 100.00 55.00 12 WZB 10253/12 190.50 104.80
5 WZB 10253/ 5 60.00 33.00 8.6 WZB 10253/ 8,6 100.00 55.00 14.1 WZB 10253/14,1 233.40 128.40
5.1 WZB 10253/ 5,1 60.00 33.00 9.1 WZB 10253/ 9,1 100.00 55.00
23
CUTTING TOOLS
CARBIDE METRIC THREAD TAP FOR BLIND AND THROUGH HOLES WZG 12151
60°
M 55 - 63
HRC
DIN
371 P
PRODUCT DESCRIPTION
ff For hardened steel
ff For ISO metric threads
MATERIAL
ff Carbide, TiCN coated
HSS-E-PM METRIC THREAD TAP FOR BLIND AND THROUGH HOLES WZG 32141
60°
M 43 - 54
HRC
DIN
371 P
PRODUCT DESCRIPTION
ff For hardened steel
ff For ISO metric threads
MATERIAL
ff HSS-E-PM, TiCN coated
CARBIDE THREAD MILLING CUTTER FOR METRIC THREADS, HARD MACHINING WZG 17151
60°
M 43 - 63
HRC
Z P
PRODUCT DESCRIPTION
ff For ISO metric threads in hardened steel
MATERIAL
ff Carbide, TiAlN coated
24
CUTTING TOOLS
25
CUTTING TOOLS
INDEXABLE SHOULDER MILLING CUTTER 90° WZT 2112 / WZT 2114 / WZT 2116
90°
PRODUCT DESCRIPTION
ff Extremely positive position on the indexable insert
ff Additional stability during plunging
ff Soft cut and very smooth running
ff High cutting performance
26
CUTTING TOOLS
27
CUTTING TOOLS
90°
PRODUCT DESCRIPTION
ff Specifically for the materials used in die and mould making
ff Vibration-free work
ff Very smooth running
ff Soft cut through helix in cutting edge
ff Easy cutting geometry
28
CUTTING TOOLS
29
CUTTING TOOLS
INDEXABLE HIGH-FEED MILLING CUTTER WZT 5132 / WZT 5134 / WZT 5136
PRODUCT DESCRIPTION
ff 4 cutting edges
ff Optimised chip space for excellent chip removal
ff Maximum metal removal rate
ff Maximum feed rates
30
CUTTING TOOLS
PRODUCT DESCRIPTION
ff Maximum efficiency
ff Feed rates up to 3 mm
ff Specifically for the materials used in die and mould making
ff Soft cutting and reduced vibration
31
CUTTING TOOLS
INDEXABLE ROUND INSERT MILLING CUTTER WZT 2512 / WZT 2514 / WZT 2516
PRODUCT DESCRIPTION
ff Maximum feed rates
ff Maximum stability
ff High metal removal rate
32
CUTTING TOOLS
PRODUCT DESCRIPTION
ff Maximum feed rates
ff Specifically for the materials used in die and mould making
ff Maximum metal removal rate
33
CUTTING TOOLS
PRODUCT DESCRIPTION
ff 4 cutting edges per indexable insert
ff High process reliability
ff Maximum feed rates
ff Good drilling behaviour
34
CUTTING TOOLS
PRODUCT DESCRIPTION
ff For centre and circumference cutting
ff Maximum feed rates
ff Stable geometry
ff Specifically for the materials used in die and mould making
ff Maximum metal removal rate
35
SURFACE FINISHING EQUIPMENT
PRODUCT DESCRIPTION
ff For ergonomic polishing
ff Ball can rotate and swivel in all directions
ff Magnet can be switched on and off
ff Ball is held in position by stick-slip effect
d No. EUR
PRODUCT DESCRIPTION
ff 48 LEDS, continuously dimmable to 10% with memory function
ff Flexibly lockable arm joint
ff Segment lighting for individual illumination
ff Scratch-proof lens
ff Arm out of aluminium in closed design
36
SURFACE FINISHING EQUIPMENT
PRODUCT DESCRIPTION
ff Highest power delivery thanks to brushless motor
ff Infinitely variable speed from 1,000-50,000 rpm/min
ff Continuous speed adjustment
ff For 140W and 200W micro motors
2.2 GDSF 2020/2,2 429.00 339.00 55,000 min-1 GDSG 1020/55 465.00 365.00
SET: SOLID CARBIDE MINI ROTARY BURR, DIAMOND CUT, SHANK Ø 3 V 72225/SET
PRODUCT DESCRIPTION
ff Shank Ø3 mm
ff Also for hardened materials
ff High surface quality
ff For pre-toughened and hardened steel up to 55 HRC
Set contents No. EUR
37
SURFACE FINISHING EQUIPMENT
PRODUCT DESCRIPTION
ff Shank Ø3 mm
ff Diamond grit D126
ff Galvanic bond
ff Fine material removal for smooth surfaces
Set contents No. EUR
PRODUCT DESCRIPTION
ff Includes all shapes of the Speed Lap system
ff Hard pads and bars for applying diamond compound in order to carry out
lapping work
ff Supplied in a convenient plastic case
No. EUR
PRODUCT DESCRIPTION
ff Universally usable through natural grit
ff Especially high cutting performance
ff Optimal grit concentration
ff Alcohol solube, easy to clean
Content Grit No. EUR
38
MEASURING EQUIPMENT
MEASURING EQUIPMENT
PRODUCT DESCRIPTION
ff With quick start push function
ff Key lock prevents unwanted zeroing
ff Rapid switching from mm to inches and vice versa, in any position
39
MEASURING EQUIPMENT
IP 65
PRODUCT DESCRIPTION
ff Hardened and stainless slide and rail
ff With rounded measuring tips, ideal for internal measurement
ff IP 65: protected against ingress of water and dust
ff Rapid switching from mm to inches and vice versa, in any position
DATA
IP 67
PRODUCT DESCRIPTION
ff Good readability, big LCD display
ff Completely protected against ingress of water through IP67-protection
ff Rapid switching from mm to inches and vice versa, in any position
20
0.01
PRODUCT DESCRIPTION
ff For precise determination of the position of workpiece surfaces in the Z-direction
ff For the referencing of cutting tools
ff Ideal for even the smallest milling cutters (down to Ø 0.1 mm)
ff Safety spring travel enables 2 mm overrun
h Version No. EUR
40
MEASURING EQUIPMENT
20
IP 67 0.01
PRODUCT DESCRIPTION
ff For determining the zero point of a workpiece
ff Equally suitable for determining hole centres and reference edges
ff Dustproof and watertight
ff Predetermined breaking point on the probe to prevent damage
PRODUCT DESCRIPTION
ff Optimal for MFH Lever dial indicators and MUA Dial indicators
ff Fixed and centred through a locking screw
ff Fine adjustment at the fixture
ff Magnet with prismatic base, can be switched on and off
AR1) No. EUR
0 0
10 10
20 20
0.01 0.01
41
MEASURING EQUIPMENT
PRODUCT DESCRIPTION
ff Ideal for monitoring the closing force of injection moulding machines
ff Different attachment options allow for a flexible application
ff Compact design for mounting on or in the mould halves
MATERIAL
ff Natural anodised aluminium
PRODUCT DESCRIPTION
ff For counting up to 60,000 pieces
ff Automatic reference sample
ff Easy adding of quantity possible
ff Separate displays for total and part weight and quantity
max. kg No. EUR
PRODUCT DESCRIPTION
ff For counting up to 60,000 pieces
ff Automatic reference sample
ff Separate displays for total and part weight and quantity
ff Easy adding of quantity possible
ff Can be optionally used with a stand
max. kg No. EUR
42
ASSEMBLY EQUIPMENT
ASSEMBLY EQUIPMENT
PRODUCT DESCRIPTION
ff Reduced rebound through steel ball filled hammer head
ff Interchangeable inserts made of wear-resistant nylon
ff Break-proof steel tube handle with ergonomically shaped non-slip grip
d No. EUR
PRODUCT DESCRIPTION
ff Hammer head out of Cu, hardness approx. 80 - 100 HB
ff Handle out of hickory wood
Weight of head No. EUR
43
ASSEMBLY EQUIPMENT
PRODUCT DESCRIPTION
ff Polished surface with satin chrome finish
ff Pliers V 20000/180, V 20010/200, V 20410/180 and V 20200/250 in a set V 20000/Set-2 80.70 62.00
PRODUCT DESCRIPTION
ff Nickel-plated surface with high corrosion resistance
ff Hexagon ball point enables screwing at angles up to 25°
MATERIAL
ff High-quality, thoroughly hardened chrome vanadium steel
Set contents No. EUR
ff Cranked hexagon screwdrivers SW 1,5; 2; 2,5, 3; 4; 5; 6; 8; 10 including functional plastic V 30000/Set 1,5-10 20.90 13.50
holder in set
PRODUCT DESCRIPTION
ff Matt nickel-plated surface with high corrosion resistance
ff Ergonomic 3-component handle enables a high torque transmission
MATERIAL
ff Thoroughly hardened blade from high-quality chrome vanadium steel
ff 4 Flat screwdrivers V 30200 in widths 3 - 4 - 5.5 - 6.5 and V 30200/Set S-PH 26.80 16.90
2 Phillips screwdrivers V 30400 PH1 and PH2
ff 4 Flat screwdrivers V 30200 in widths 3 - 4 - 5.5 - 6.5 and V 30200/Set S-PZ 27.70 17.50
2 Pozidriv screwdrivers V 30400 PZ1 and PZ2
44
ASSEMBLY EQUIPMENT
PRODUCT DESCRIPTION
ff Spanner widths with tight tolerances
ff Non-flaking surface through nickel chromium plating
ff High flexion resistance and light weight through fluted shaft
MATERIAL
ff Drop forged chrome alloy steel with smooth finish
Double open ended spanner SW 6/7, 8/9, 10/11, 12/13, 14/15, 16/17, 18/19 and 20/22 in a set V 32010/Set 6-22 44.90 31.50
Double open ended spanner SW 6/7, 8/9, 10/11, 12/13, 14/15, 16/17, 18/19, 20/22, 24/27 and 30/32 in a set V 32010/Set 6-32 71.60 49.90
PRODUCT DESCRIPTION
ff Refillable with V 56004 individual containers
MATERIAL
ff 1.4310
PRODUCT DESCRIPTION
ff Ensures quick and easy demagnetisation
ff 100% duty cycle enables permanent use in measuring rooms, workshops and
production lines
ff Perfect for the demagnetisation of plates, punches, dies, moulds and tools
l1) No. EUR
45
CONSUMABLES
CONSUMABLES
ADVANTAGES
ff Very economical through high active substance concentration
ff Special additives leave behind a temporary corrosion protection
ff Biodegradable and compatible with oil separators (Austrian Standard B 5105)
PRODUCT DESCRIPTION
ff FKM (Viton) sealing, resistant to oil
ff EPDM sealing, resistant to cleaning agents
ff High chemical resistance by active components out of PA
ff Optimal vaporisation through adjustable nozzle
Capacity Version No. EUR
46
CONSUMABLES
ADVANTAGES
ff For threads up to M36 and gaps up to 0.25 mm
ff The connection can be disassembled using manual tools
ff Vibration and impact resistant
ff Can be used on passive materials
ff No labelling required
ADVANTAGES
ff For threads up to M36 and gaps up to 0.18 mm
ff The connection can be disassembled using manual tools
ff High resistance to chemicals
ff Vibration and impact resistant
ff No labelling required
47
PROTECTIVE EQUIPMENT
PROTECTIVE EQUIPMENT
PRODUCT DESCRIPTION
ff Rimless spectacles with wide field of vision
ff Scratch-resistant outside, anti-fog on the inside
ff Available in 2 sizes
ff Completely metal-free
No. EUR
Pair / PU
300 ASG 1060/300L 50.10 33.00
48
PROTECTIVE EQUIPMENT
PRODUCT DESCRIPTION
ff Robust wall-mounted dispenser
ff Easy-to-use
ff Suitable for all disposable uvex earplugs
Capacity No. EUR
PRODUCT DESCRIPTION
ff For noisy environments
ff Padded headband for optimal wearing comfort
ff Soft surface guarantees a pleasant fit
ff Lightweight, small muffs
SNR / Attenuation No. EUR
PRODUCT DESCRIPTION
ff FFP 2 preformed mask with exhalation valve
ff Maximum comfort and adjustability
ff For harmful and slightly toxic dust and smoke
ff Up to 10 times the threshold limit value
No. EUR
Pcs. / PU
15 ASM 2430/15 32.40 22.00
49
PROTECTIVE EQUIPMENT
3121
PRODUCT DESCRIPTION
ff The lightest safety glove in its class
ff Exceptional dexterity
ff Excellent dry grip
ff Very high level of breathability
ff For precision work
3131
PRODUCT DESCRIPTION
ff For assembly and precision work
ff Aqua-polymer foam coating is moisture-repellent
ff Outstanding tactile feel
ff Excellent dry grip
ff Very high level of breathability
50
PROTECTIVE EQUIPMENT
11
10
9
8
7
For very small or big hands, a smaller or larger size should be chosen for
optimum wearing comfort.
51
REDUCED PLATE
CONSISTENT OUTSTANDING CONTINUOUS SHORT
WARPING DURING
HIGH QUALITY SERVICE AVAILABILITY LEAD TIMES
MACHINING
©2019/1 Meusburger Georg GmbH & Co KG. All rights reserved. Any use, including but not limited to publication,
copying, distribution, reproduction and/or modification, -even in part- is prohibited without prior written authorisation
of Meusburger Georg GmbH & Co KG. Technical changes and printing or other errors reserved.
Web shop
www.meusburger.com/shop
Offline shop
install and get started!
Phone
+43 5574 6706-0
Email
sales@meusburger.com
X19914-V1-09/19-EN