Professional Documents
Culture Documents
GSM Radio
GSM Radio
DataType: gsm_radio
1. You must fill in accordance with the instructions of the 3 and 4 lines.
2. All enumerated type field, fill in the memory value; other fields fill in the
Instructions: displayed value.
3. The 4 line is the attribute of field. I:Must be filled; W:Can be modified; R:Can
be read; Primary Key:Must be filled, Can not be modified.
Management
Index Radio mode feature
Object Name
114 15 5
114 15 6
114 15 1
114 15 2
114 15 3
114 15 4
A 114 84 5
A 114 84 6
A 114 84 4
TxDevice multiCarrierGroupNo channelGroupNo carrierPower
Multi-carrier Combination
Transmission port GSM Cell Channel Group No. Carrier Power
Group No.
String
RU No.#portNo
long:<default:0> long:<default:0>
RSU: 2 to 50
[0..32] [0..216] long:[0..200]
RRU: 51 to 201 GSM Cell Channel Group No.
Multi-carrier combination
e.g 51#2 0 indicates no grouping.
group number. 0 indicates This attribute indicates
When Multi-carrier
no grouping. Multi-carrier the power configured for
combination group is greater
combination means that the carrier. The total
Transmission port of the than zero,GSM Cell Channel
the carriers, which power of all carriers in the
channel. Group No must be greater
physically belong to same RU device must be
than zero.Only one physical
different channels, lower than the rated
carrier in one GSM Cell
logically belong to the power.
Channel logically belongs to
R-W-I same carrier
R-W frequency. R-W R-W-I
the same carrier frequency.
55#1 0 0 20
56#1 0 0 20
51#1 0 0 40
52#1 0 0 40
53#1 0 0 40
54#1 0 0 40
55#1 0 0 20
56#1 0 0 20
54#1 0 0 20
indicates that
one transmitting
channel and two
receiving
channels form a Receiving mode
channel. of the RF unit.
“DPCT” "2-antenna
indicates that diversity
long:<default:0> two transmitting reception"
powerLevel txMode rxMode ddtOffset rxConfig CELL_ID_1
0:0db, channels indicates that
1:2db, transmit the two receiving
2:4db, same signal (of channels receive long:<default:0>
Static Power primary-secondary
3:6db, the same a signal 0:Primary and First GSM
Attenuation Level Tx Mode Rx Mode DDT Delay antenna receiving
4:8db, frequency and simultaneously. secondary antenna Cell No.
of Carrier long:<default:0> setting
5:10db, long:<default:0>
same phase), It helps receiving,
0:2-antenna
6:12db, 0:Normal
which mode,
enhances implement 1:Primary
It setsantenna
diversitythe the
7:14db, 1:DPCT,
the transmission space diversity, long:<default:0> receiving. secondary
active/standby
reception,
8:16db, 2:DDT,
power. and is often [0..8] that
DDT delay, antenna
diversity not
reception long:[1..54]
1:4-antenna
9:18db, “DDT”3:Antenna
indicates used together is, the delay receiving,
option. There are
It sets the power diversity
10:20db, hopping
that two withreception
the normal between 2:Secondary
three options:
attenuation
254:-0.2db, antenna receiving.
transmitting transmission transmitting the "Primary and
amplitude of the
253:-0.4db, primary antenna not
channels mode. same signal on secondary antenna
RF unit. 0 indicates First GSM
252:-0.6db, transmit the "4-antenna two transmitting receiving
receiving", "Primary
no 251:-0.8db,
attenuation, 1 Cell No.
same signal (but diversity channels antenna receiving.
indicates 2 dB
250:-1.0db, there is delay reception" (supported only secondary antenna
attenuation, and so
249:-1.2db between the two indicates that by the dual- not receiving", and
on.
R-W signals). R-W It helps four receiving
R-W transmitting
R-W RU). "Secondary R-Wantenna R-I
implement the channels receive Refer to the receiving. primary
0 0time diversity. If 0 a signal 0related features. 0 antenna not 5
0 0 "DDT" is 0, it 0simultaneously. 0 0 receiving". 6
0 0 indicates the 0 It helps 0 0 1
transmission implement the
0 0 0 0 0 2
diversity. space diversity,
0 0 "Antenna 0 and is often 0 0 3
0 0 hopping" 0 used together 0 0 4
0 0indicates that a 0 with the DPCT 0 0 5
0 0 signal is 0 or DDT 0 0 6
0 0 transmitted 0 transmission 0 0 4
alternately on mode.
two channels Refer to the
according to a related features.
fixed period. It
helps implement
the space
diversity.
For detailed
information,
refer to the
related features.
gpsOffset_1 carrierNum_1 hsrCellOutInletFlag_1 ISBCCH_1 bcchCarrierNo_1 CELL_ID_2
Second GSM
Cell GPS
Number of Used End ID of High-speed Is BCCH Preferred BCCH preferential
Synchronized It is applied in the
Carriers Railway Cell Channel Carrier No.
Frame Head scenario of high speed
Offset railways configured with
long:<default:0>
mutli-carrier combination long:<default:0>
long:<default:0>
BCCH preferred
long:<default:0> group.1:Yes,
It is used to 1:Yes,
long:[1..8] carrier [0..8]
number. 0
[0..50] identify0:No
whether a 0:No
indicates invalid, that
channel is the inlet/outlet 0 indicates invalid,
is, the base station
endpoint of the mutli- that is, the base
GPS The sum total of does not specify
carrier combination. station does not
synchronization all sector's BCCH preferred
Each cell can be specify BCCH
frame number carrier number is carrier and randomly
configured with two preferred channel
offset. You can not greater than allocates BCCH to a
endpoint channels at and randomly
set it within the the Total Carrier carrier. If
most. The configuration allocates BCCH to a
value range. In a Number. gCellEquipmentFunc
sequency of this channel.
synchronization
R-W R-W R-W must R-W No isR-W
set to 0,
prameters
area, it is bcchCarrierNo must
correspond to the
recommended to be 0.
configuration sequence
set different of
offsets for refGCellEquipmentFuncti
different cells, on.
which helps
avoid the
decrease in
measurement
efficiency of
mobile phone
due to SCHs in
the cell
broadcasting
simultaneously.
CELL_ID_3 gpsOffset_3 carrierNum_3 hsrCellOutInletFlag_3 ISBCCH_3
Fourth GSM
Cell GPS
BCCH preferential Fourth GSM Cell Number of Used End ID of High-speed
Synchronize It is applied in the
Carrier No. No. Carriers Railway Cell
d Frame scenario of high speed
Head Offset railways configured with
long:<default long:<default:0>
mutli-carrier
long:<default:0>
long:[1..54] :0> combination 1:Yes,group. It is
[0..8] carrier
BCCH preferred long:[1..8]
[0..50] 0:No whether
used to identify
number. 0 indicates
a channel is the
invalid, that is, the base
inlet/outlet endpoint of
station does not specify GPS The sum total of
the mutli-carrier
BCCH preferred carrier all sector's
Fourth GSM Cell synchronizat combination. Each cell
and randomly allocates ion frame carrier number is
No. can be configured with
BCCH to a carrier. If number not greater than
two endpoint channels
gCellEquipmentFuncNo offset. You the Total Carrier
at most. The
is set to 0, can set it Number.
configuration sequency
bcchCarrierNo
R-W must be R within
R-Wthe R-W R-W
of this prameters must
0. value range. correspond to the
In a configuration sequence
synchronizat of
ion area, it is refGCellEquipmentFunc
recommend tion.
ed to set
different
offsets for
different
cells, which
helps avoid
the
decrease in
measureme
nt efficiency
of mobile
phone due
to SCHs in
the cell
broadcasting
simultaneou
sly.
ISBCCH_4 bcchCarrierNo_4 CELL_ID_5 gpsOffset_5 carrierNum_5 hsrCellOutInletFlag_5
Fifth GSM
Is BCCH Cell GPS It is applied in the
BCCH preferential Fifth GSM Cell Number of End ID of High-speed
Preferred Synchronize scenario of high
Carrier No. No. Used Carriers Railway Cell
Channel d Frame speed railways
Head Offset configured with mutli-
long:<default:0> BCCH preferred long:<default long:<default:0>
carrier combination
long:<default:0>
1:Yes, carrier[0..8]
number. 0 :0> group. 1:Yes,
It is used to
long:[1..54] long:[1..8]
0:No indicates invalid, [0..50] identify0:No
whether a
0 indicates
that is, the base channel is the
invalid, that is, The sum total
station does not inlet/outlet endpoint of
the base station GPS of all sector's
specify BCCH the mutli-carrier
does not specify carrier
preferred carrier Fifth GSM Cell synchronizat combination. Each
BCCH preferred ion frame number is not
and randomly No. cell can be configured
channel and number greater than
allocates BCCH to with two endpoint
randomly offset. You the Total
a carrier. If channels at most. The
allocates BCCH can set it Carrier
gCellEquipmentFu configuration
to a channel.
R-W R-W R withinR-Wthe Number.
R-W R-Wof this
ncNo is set to 0, sequency
bcchCarrierNo value range. prameters must
must be 0. In a correspond to the
synchronizat configuration
ion area, it is sequence of
recommend refGCellEquipmentFu
ed to set nction.
different
offsets for
different
cells, which
helps avoid
the
decrease in
measureme
nt efficiency
of mobile
phone due
to SCHs in
the cell
broadcasting
simultaneou
sly.
ISBCCH_5 bcchCarrierNo_5 CELL_ID_6 gpsOffset_6 carrierNum_6 hsrCellOutInletFlag_6
Sixth GSM
Is BCCH Cell GPS It is applied in the
BCCH preferential Sixth GSM Cell Number of End ID of High-speed
Preferred Synchronize scenario of high
Carrier No. No. Used Carriers Railway Cell
Channel d Frame speed railways
Head Offset configured with mutli-
long:<default:0> BCCH preferred long:<default long:<default:0>
carrier combination
long:<default:0>
1:Yes, carrier[0..8]
number. 0 :0> group. 1:Yes,
It is used to
long:[1..54] long:[1..8]
0:No indicates invalid, [0..50] identify0:No
whether a
0 indicates
that is, the base channel is the
invalid, that is,
station does not The sum total inlet/outlet endpoint of
the base station GPS
specify BCCH of all sector's the mutli-carrier
does not specify
preferred carrier Sixth GSM Cell synchronizat carrier number combination. Each
BCCH preferred ion frame
and randomly No. is not greater cell can be configured
channel and number
allocates BCCH to a than the Total with two endpoint
randomly offset. You
carrier. If Carrier channels at most. The
allocates BCCH can set it
gCellEquipmentFun Number. configuration
to a channel.
R-W R-W R withinR-Wthe R-W R-Wof this
cNo is set to 0, sequency
bcchCarrierNo must value range. prameters must
be 0. In a correspond to the
synchronizat configuration
ion area, it is sequence of
recommend refGCellEquipmentFu
ed to set nction.
different
offsets for
different
cells, which
helps avoid
the
decrease in
measureme
nt efficiency
of mobile
phone due
to SCHs in
the cell
broadcasting
simultaneou
sly.
ISBCCH_6 bcchCarrierNo_6 CELL_ID_7 gpsOffset_7 carrierNum_7
Seventh GSM
Cell GPS
Is BCCH BCCH preferential Seventh GSM Number of Used
Synchronized
Preferred Channel Carrier No. Cell No. Carriers
Frame Head
Offset
long:<default:0> long:<default:
long:<default:0>
BCCH preferred
1:Yes, 0>
0:No carrier[0..8]
number. 0 long:[1..54]
[0..50]
long:[1..8]
indicates invalid,
0 indicates invalid,
that is, the base
that is, the base
station does not GPS The sum total of
station does not
specify BCCH synchronizatio all sector's
specify BCCH Seventh GSM
preferred carrier and n frame carrier number
preferred channel Cell No.
randomly allocates number offset. is not greater
and randomly
BCCH to a carrier. If You can set it than the Total
allocates BCCH to
gCellEquipmentFun within the Carrier Number.
a channel.
R-W cNo isR-W
set to 0, R valueR-W
range. R-W
bcchCarrierNo must In a
be 0. synchronizatio
n area, it is
recommended
to set different
offsets for
different cells,
which helps
avoid the
decrease in
measurement
efficiency of
mobile phone
due to SCHs
in the cell
broadcasting
simultaneously
.
hsrCellOutInletFlag_7 ISBCCH_7 bcchCarrierNo_7 CELL_ID_8 gpsOffset_8
Eighth GSM
Cell GPS
End ID of High-speed Is BCCH Preferred BCCH preferential
It is applied in the Eighth GSM Cell No. Synchronized
Railway Cell Channel Carrier No.
scenario of high speed Frame Head
railways configured with Offset
long:<default:0>
mutli-carrier long:<default:0> long:<default:
long:<default:0>
BCCH preferred
combination 1:Yes,group. It is 1:Yes, 0>
carrier [0..8]
number. 0 long:[1..54]
0:No whether
used to identify 0:No [0..50]
indicates invalid, that
a channel is the 0 indicates invalid,
is, the base station
inlet/outlet endpoint of that is, the base
does not specify GPS
the mutli-carrier station does not
BCCH preferred synchronizati
combination. Each cell specify BCCH
carrier and randomly Eighth GSM Cell No. on frame
can be configured with preferred channel
allocates BCCH to a number
two endpoint channels and randomly
carrier. If offset. You
at most. The allocates BCCH to a
gCellEquipmentFuncN can set it
configuration sequency channel.
R-W R-W o is R-W
set to 0, R withinR-W
the
of this prameters must
bcchCarrierNo must value range.
correspond to the
be 0. In a
configuration sequence
of synchronizati
refGCellEquipmentFun on area, it is
ction. recommende
d to set
different
offsets for
different cells,
which helps
avoid the
decrease in
measurement
efficiency of
mobile phone
due to SCHs
in the cell
broadcasting
simultaneousl
y.
carrierNum_8 hsrCellOutInletFlag_8 ISBCCH_8 bcchCarrierNo_8
A:Add, D:Delete,
unique in an OMMB unique in subnetwork
M:Modify
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
114 15
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
A 114 84
cellNo trxNo operatingMode multiCarrierGroupNo
long:<default:0>
0:Single carrier, GSM long:<default:0>
carrier frequency
long:[1..54] long:[1..60] GSM1:Dual-carrier,
carrier frequency [0..32]
working mode In the case
working2:Multi-carrier
mode In the case of
of four-antenna receiving
four-antenna receiving
diversity, set this
diversity, set this parameter
Refers to the sheet "GSM Carrier frequency ID. You parameter to "Dual-
to "Dual-carrier", and the
Cell" can set it within the value carrier", and the four
four antennas have the
range. It is an antennas have the same
same receiving range,
interconnection receiving range, which
which enhances the uplink
parameter. Different cells enhances the uplink
receiving capability. "Multi-
can have the same receiving capability. "Multi-
carrier" is applied in the
Primary Key carrier frequency
R-I number, carrier" is R-W
applied in the
case of R-W
multi-carrier
but the carrier frequency case of multi-carrier
combination.
1 numbers
1 of the same cell 0 0 combination.
1 must
2 differ from each 0 0
2 other.
1 0 0
2 2 0 0
3 1 0 0
3 2 0 0
4 1 0 0
4 2 0 0
5 1 0 0
5 3 0 0
5 4 0 0
6 1 0 0
6 2 0 0
6 3 0 0
6 4 0 0
5 2 0 0
4 1 0 0
4 2 0 0
4 3 0 0
4 4 0 0
5 1 0 0
5 2 0 0
5 3 0 0
5 4 0 0
6 1 0 0
6 2 0 0
6 3 0 0
6 4 0 0
long:<default:2>
mainBand branchBand enableIRC isExtendTrx
8:Rx(880MHz-
915MHz)Tx(925MHz-
960MHz), Extend carrier
Parent Frequency Band Sub frequency band Use IRC
3:Rx(1710MHz- frequency
1785MHz)Tx(1805MHz- It decides whether
1880MHz), long:<default:1> to configure the
long:<default:0>
1:Rx(1920MHz- long:<default:255> 0:Disable IRC, current carrier as
1:Yes,
1980MHz)Tx(2110MHz- 1,2,3,255:Invalid 1:Enable
It sets IRC,the
whether the extended
0:No
2170MHz), 2:Enable
feature STIRC
"ZGO-04-01- carrier. The odd slot
5:Rx(824MHz- 005 Uplink Interference and the even slot of
849MHz)Tx(869MHz- Rejection Combining the extended carrier
894MHz), (IRC)" is enabled. This are combined as
Sub frequency band of
2:Rx(1850MHz-
Frequency band of the carrier feature can improve the one slot, which
the carrier
1910MHz)Tx(1930MHz- uplink receiving signal increases the cell
1990MHz) quality in the GSM coverage range.
system. It is For detailed
R-W R-W recommended
R-W to information,
R-W refer to
enable this feature. the description of
8 255 1 0 "ZGO-04-01-001
8 255 1 0 Extended Cell
8 255 1 0 Coverage".
8 255 1 0
8 255 1 0
8 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
3 255 1 0
mcumRxSelMode mcumTxSelMode
It is a function
Is uplink
switch. signal
For cells
Select RU
selected
configuredaccording
with It is a function switch.
transmission
to CIR
multi-carrier For cells configured
combination, if this with multi-carrier
long:<default:0>
feature is enabled, long:<default:0>
combination, if this
the base1:Yes,
station feature1:Yes,
is enabled,
decides0:No from which 0:Nostation
the base
RU the signal is selects a RU to
received in uplink transmit the signal in
according to the downlink. If this
Carrier-to- feature is disabled, all
Interference (C/I) RUs transmit signal
ratio. If this feature simultaneously.
is disabled, the Usually, it is
base station uses recommended to
R-W
other methods to disable thisR-Wfeature. If
decide from which "ZGO-04-02-004
0 RU the signal is 0Uplink discontinuous
0 received. It is 0 transmission" is
0 recommended to 0enabled, disable this
0enable this feature 0 feature.
0 in scenarios of 0
0large interference. 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0