Spee. No. C- 8703 Rev.F
‘Page 2 of 21
1 Scope
2 Definition
3____| Drawings_ sit a
4 Capabilities of production and prototype
a shiook absorbers
3 Procedure for inspection and testing of
fi _____| prototype shock absorbers. sobs
6 Procedure for inspection md testing of
produotion shock absorbers i
7 Particular requirements
8 Guarantee / warranty _
‘General
10 General inspection _10
faa on “Training and infrastructural fuelities. saris
2 ‘Markings Liven
3 Packing a Teh
‘Appendix -1 | Teste for ascertaining overall damping, mo
characteristice
“Appendix =I | Procedure for establishing approved 4
characteristics
‘Appendix -IIl | Procedure for testing the characteristics of is
shock absorber end mountings
‘Appendix-1V | Procedure for testing strength of shock 16
absorbers
‘Appendix-V | Procedure for testing endurance of shock 7
absorbers,
| Appendix - Vi_| Quality assurance & guarantee certificate 18
Fig] | Manner of presenting the submitted 19
charnoteristio
Fig? | Manner of Drawing approved characterietic | 20
Fig.3 ‘Manner of Showing the specified ah
characteristic