Professional Documents
Culture Documents
ECT ECL ECS New
ECT ECL ECS New
Water Heater
Export
TALL, SHORT AND LOWBOY MODELS GLASS COATING
AVAILABLE
• Specially developed glass coating protects
IMMERSION HEATING ELEMENT steel tank from corrosion and maximizes
• Standard supplied with a zinc coated tank life.
copper element of 4.5 kW, operating CSA/ASME CERTIFIED T&P RELIEF VALVE
at 240 Volt. Other element options are
available, depending upon model, in a • Factory installed, side-mounted T&P safety
range from 1.5 to 6.0 kW. relief valve is standard on all models.
• Top-mounted T&P Relief Valve available as
TEMPERATURE CONTROLS
option on select models.
• Surface mounted control thermostats with
a temperature range from 43°C /110°F to HEAT TRAPS
maximum 71°C /160°F and hi-limit factory • All models are equipped with factory
fixed setting at 83°C /180°F. installed heat traps on the inlet and outlet
• Thermostats are accurate to ± 2.5°C/ 5°F. connections to improve energy efficiency.
• Carries incoming cold water from the top • Meets the Federal Energy Efficiency
connection, to the bottom of the tank to Standards according to the 2004 edition
minimize mixing with the hot water in the of the National Appliance Energy
tank. Conservation Act (NAECA) of 1992. And
also Meets the standby loss requirements
• Helps reduce lime and sediment buildup of the U. S. Department of Energy and
while maximizing hot water output. Made Current Edition of ASHRAE/IES 90.1.
from long-lasting PEX cross-linked polymer.
CERTIFICATIONS
COREGARD™ ANODE ROD
• Residential export water heaters comply
• Aluminum anode with stainless steel core with UL 174, SASO, GSO, PAI and IEC
protects tank against corrosion longer than 60335-2-21.
ordinary steel anodes.
6-YEAR LIMITED TANK AND PARTS
DURABLE, TAMPER-RESISTANT BRASS WARRANTY
DRAIN VALVE
• For complete information consult written
TANK CONSTRUCTION warranty.
• The internal pressure tank is constructed
of heavy duty carbon steel. Maximum
working pressure is rated at 150 psi /10
bar. Test pressure per UL 174 std is
300 psi /20 Bar.
OPTIONS
ANODE ROD*
Element options for export models (depending on HOT
CONNECTION COLD
model and National Codes of importing country): CONNECTION
• Commercial grade incoloy sheathed elements with
Ni-Chrome resistance wire embedded in magnesium oxide.
Range 1.5 to 6.0 kW, rated 230 Volt, suitable for 220-240
Volt power supply, at added cost. 8"
A B
For Technical Information, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
Page 2 of 2
hotwater.com | 800-527-1953 Toll-Free USA AOSRE50401