Professional Documents
Culture Documents
GIDC User Manual
GIDC User Manual
Index
1. Introduction 2
3. Objectives 3
5.1 Do’s 3
5.2 Dont’s 4
7. Precheck software 4
Page 1|9
GIDC Smart DCR – User Manual July 2017
1. INTRODUCTION
Every industrial zone in the world is continually evolving and developing to meet its
investor’s needs. An authority powered by government is controlling the development
of these industrial areas to have a harmonious as well as infrastructural and
technologically superior ecosystem for all.
GIDC has been created for securing the orderly establishment and organization of
industries in industrial areas and industrial estates in the state. To fulfil the above
mandate, the Corporation has established 202 industrial estate.
A large amount of time saving will be achieved and the planners consider this as a
boon to them. This also helps investors as the waiting time for sanctions/approvals
will be greatly reduced.
1. System is designed for Architects to register and submit the drawing and get the
Reference Number of the Application.
2. This system is designed to allow an Architect to submit the drawing and check
the status of drawing online.
3. The software will facilitate communication between Architects via E-Mail, Public
can also view the status of their File Online.
4. The system also contains a relational database having list of Architects’ details.
5. The Architects can also get their scrutiny report online using their Reference
Number.
3. OBJECTIVES
To bring transformation in the plan scrutiny processing system with speed, accuracy,
consistency and transparency in the entire scrutiny process. To achieve the goal, it is
proposed to automate the planning scrutiny process by customization with Smart
DCR.
The Automation helps to increase the productivity and Accuracy of the Drawing Result.
6. Speed up the Scrutiny process.
Page 2|9
GIDC Smart DCR – User Manual July 2017
5.1 DO’s:
5.2 DON’T’s:
Preparation of computerized plans for SmartDCR has the following steps, which are to be
followed compulsory. Otherwise SmartDCR will not process the given drawing.
1. Proposed Floor layer: FLOOR01, FLOOR02, etc. corresponding to the floor count.
2. FLOOR-STILT or FLOOR-GROUND for common Site related details.
3. For Proposed Basement floor, layer should be FLOOR-BF1, FLOOR–BF2 etc.
Corresponding to the Basement Floor Count.
4. Don’t use unnecessary spaces in layer Names.
2. All proposal drawing should be in .DWG Format
3. All objects to be processed by SmartDCR should be drawn using Lines, Polylines and
Text and placed in layers starting with Floor.
4. Layers and Colours should be followed as per the colour code table.
5. Remove the unused layers, dimension styles etc.
6. Drawing units should be in meters.
7. All details should be drawn in scale 1:1 (True Scale).
8. Avoid unnecessary objects in the drawing.
9. In the site plan, Front Setback should be in the Bottom Of the drawing.
10. Avoid unnecessary coordinates in polylines.
Page 3|9
GIDC Smart DCR – User Manual July 2017
7. PRE-CHECK SOFTWARE:
Pre-check is the software given for finding out all the polyline, line, and text related
problems in the drawing. When the Applicant submits the building map proposal, this
software enables the applicant to rectify the defects in the drawing and make it suitable to
run in the Scrutiny software. It reads the drawing elements and lists all the discrepancies in
the drawing. It will process the file and gives the output with various parameters as listed
below. If errors are found in the drawing, the drawing will be populated with hyperlinks to
the errors and will be returned to the Applicant via email.
1. Setback Boundary
2. Multiple Polyline Geometry Problems
3. Invalid object colour
4. Misplaced OTS
5. Existence of Blocks, Regions, Wipe-outs & External references in Floor layers
6. Mandatory requirements
7. Other critical errors
By clicking on the above disqualified items in the software interface, details will be
displayed such as disqualified object name; floor name and drawing coordinate position. It
will also draw a crossed grey line on all the disqualified objects throughout the drawing.
1. Gate
2. Basement Floor Height
3. Stilt Floor Height
4. Plinth Height
5. Floor Height
6. Front margin
8. Side 1 margin
9. Side 2 margin
10. Rear margin
11. Building height
12. Total building height
1. Plot Boundary
2. Margin Boundary
3. Stilt Parking Area Boundary
4. Rain Water Harvesting Trench
5. FSI
6. Staircase Area
7. Lift
8. Balcony
9. Block Rectangles for Group Development
Page 4|9
GIDC Smart DCR – User Manual July 2017
Page 5|9
GIDC Smart DCR – User Manual July 2017
Page 6|9
GIDC Smart DCR – User Manual July 2017
Page 7|9
GIDC Smart DCR – User Manual July 2017
ANNEXURE
PARAMETERS
SNAPSHOTS
Page 8|9
S.No Description Layer
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
Super Imposed
Plot Boundary
Polyline
PATTA 20.64
PATTA 20.64
Color
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
Number 7
1.40
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
MARGIN BOUNDARY
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
Margin Boundary
Polyline
Color
Number 10
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
PATTA 20.64
PATTA 20.64
1.40
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
MARGIN
Rear Margin
Line
Color
PATTA 10.00
Side 2
Number 3
RWH
Margin
1.94
Line 1.30
Color
Number 6
SIDE OPENSPACE
SIDE OPENSPACE
PATTA 20.64
PATTA 20.64
PROPOSED BUILDING
1.30
FRONT OPENSPACE
3.89
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
Front Margin
Line
Color
SITE PLAN
Number 4
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
SIDE OPENSPACE
SIDE OPENSPACE
PATTA 20.64
PATTA 20.64
PROPOSED BUILDING
Plot Frontage
Open Polyline
Color
Number 96
1.40
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
COVERED PARKING
12.02
REAR OPEN
12 X 1.66
Visitor Parking
Polyline
Color
Number 152
1.51 X 13.14
1.51 X 13.14
Parking Area
SIDE OPEN
SIDE OPEN
Polyline
17.05 VISITOR PARKING
Color
Number 104
PARKING AREA
Stilt Parking
Polyline
FRONT OPEN
Color
12 X 2.25
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
OPEN PARKING
PATTA 10.00
REAR OPENSPACE
RWH
2.04
Visitor Parking
2.40
Polyline
2.30
Color
Number 152
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
PATTA 20.64
PATTA 20.64
Parking Area
Polyline
Color
2.40
VISITOR PARKING Number 104
PARKING AREA
Reserved for Cars
6.71
Polyline
Color
FRONT OPENSPACE
Number 245
RESERVED FOR CARS
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
RAINWATER HARVESTING
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
PATTA 20.64
PATTA 20.64
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
Rain Water
Harvesting Trench
Polyline
Color
1.40 Number 42
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
11 Residential FSI shall be drawn as Polyline in Color No. 181. Applicable Floor
Layer
RESIDENTIAL FSI
9.75
W W
WATER CLOSET
V
1.81 X 2.19
KITCHEN
2.00 x 3.00
D1
BED ROOM
D1 3.0 x 4.5
O
V BATHROOM A
1.81 X 2.19
11.70
W HALL/DINING
4.93 X 3.92
Residential FSI
Polyline
FIRST FLOOR PLAN
Color
Number 181
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
12 Dwelling unit shall be drawn as Polyline in Color No. 230 and Applicable Floor
Kitchen text with Dwelling unit text shall be kept inside 230 Layer
Color Polyline
DWELLING UNIT
Kitchen 9.75
Text W W
Color
Number 230 WATER CLOSET
V
1.81 X 2.19
KITCHEN
BED ROOM 2.00 x 3.00
D1 3.0 x 4.5
Dwelling unit Text
Text D1
O
Color V BATHROOM 1
1.81 X 2.19
Number 230
11.70
W HALL/DINING
4.93 X 3.92
Dwelling Polyline
Polyline
FIRST FLOOR PLAN
Color
Number 230
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
13 Bathroom, Water closet and Urinal shall be drawn as Polyline Applicable Floor
in Color No. 81 and text shall be placed Layer
Water closet
Polyline and Text 9.75
Color W W
Number 81
WATER CLOSET
V
1.81 X 2.19
KITCHEN
BED ROOM 2.00 x 3.00
D1 3.0 x 4.5
D1
O
Bathroom V
BATHROOM 1
1.81 X 2.19
Polyline and Text
11.70
Color
D
Number 81
W HALL/DINING
4.93 X 3.92
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
14 Habitation room shall be drawn as Polyline in Color No. 150 Applicable Floor
Layer
HABITATION ROOM
Polyline W W
Color
Number 150 WATER CLOSET
V
1.81 X 2.19
KITCHEN
BED ROOM 2.00 x 3.00
D1 3.0 x 4.5
D1
O
V BATHROOM 1
1.81 X 2.19
11.70
W HALL/DINING
4.93 X 3.92
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
15 Commercial FSI shall be drawn as Polyline in Color No. 6 and Applicable Floor
corresponding Building use text should be kept inside the Layer
boundary in Color No. 6.
COMMERCIAL FSI
7.46
Commercial FSI W
LIFT
V1
TOILET
D1
W W
UP
1.98X1.98 1.98X1.98
Polyline and Text W L.D W
O
F.E
Color
Number 6
W W
F.E
V1
SHOP
W
16.61M x 32.92M W
W
W 14.58
W W
W
W
F.E
W W
ALL COLUMN
0.3MX0.6M
W W
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
16 Industrial FSI shall be drawn as Polyline in Color No. 134 and Applicable Floor
text shall be placed in the same Color layer
INDUSTRIAL FSI
7.02
W5 W3
W5
BOILER HOUSE
W2 HEIGHT-8.00 MD
W2
6.72 M X 8.23 M W5
W2
16.63
W2
W3
Industrial FSI
Polyline and Text
6.72M X 6.30M
Color
W2
Number 134
W1
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
17 Non FSI area shall be drawn as Polyline in Color No.4 and Applicable Floor
Text shall be placed in the same layer. Kindly refer to section Layer
9b in User Manual for Non FSI text.
NON FSI
7.71
LIFT
2.24 x 2.40 W
UP
Pump Room
Polyline and Text
Color
16.87 Number 4
PUMP ROOM
1.74 X 2.69
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
DISTINGUISHING BLOCKS
Block Footprint
Polyline
Color
Number 10
P-2
P-1
BLO CK 1
TREES-80
BLOCK 7 8
MAIN ENTRY
COP-1
P-3
COP-2
160MM DIA. PIPE
Text
BLOCK 5
Color
PLOT PLAN
N FOR G.I.D.C. APPROVAL
Number 50
BLOCK 2 3 4 BLOCK 6
B
A A A A
A A
A X 1
TOTAL (I)
A A
A X 1
TOTAL (I)
A X 1
TOTAL (I)
B
A X 1 A X 1
A 9. 00 X 10 . 00 X 0. 5
TOTAL (I) TO TAL (I)
TOTAL (II )
TOTAL
4 3 2
B
A A
N 3
4
A X 1 2
A X 1
B X 1
B X 1
TOTAL (I)
TOTAL (I)
A X 1
A 1 6. 50 X 1 8. 00 X 05
. TO TAL (I)
A 1 8. 50 X 1 5. 00 X 05
.
TOTAL (II ) OFFIC E BLD G. ST OR AGE S HED
TO TAL (II)
TO TAL PLAN T BU ILDIN G
TO TAL
Block Distinguishers
Polyline & Text
Color
Number 50
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
19 For the Typical floors, if it starts from FLOOR01 and lasts up Starting Floor
to FLOOR03, the text shall be given in the Colour No. 7 as Name
"FLOOR01, FLOOR02, FLOOR03-TYPICAL", as shown in (FLOOR01)
the drawing below.
W3 W4
D1 Typical Floor
Text
1 Color
D1
Number 7
HALL D2
2.82 x 3.92
W6 KITCHEN
1.88 x 2.78
W5 Typical Floor
Polylines
Layer
FLOOR01,FLOOR02,FLOOR03-TYPICAL FLOOR01
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
20 Height of the building shall be drawn as Line in Color No. 151 FLOOR-GROUND
or
FLOOR-STILT
Height of
the building
Line
Color
HALL KITCHEN
Number 151
HALL KITCHEN
GL GL
SECTION AT AA'
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
Total height of
the building
Line
Color
HALL KITCHEN
Number 233
17.13
HALL KITCHEN
HALL KITCHEN
GL GL
SECTION AT AA'
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
22 Stilt Floor height is the minimum clear height taken from the FLOOR-STILT
bottom of the stilt floor to the bottom of the roof beam. It shall
be drawn as line in Color No. 21.
Parapet
First floor
11.96
10.39
3.98
Stilt Parking Stilt Parking
GL GL
SECTION AT AA'
Stilt Height
Line
Color
Number 21
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
Basement Floor
Height
Line
Parapetl
Color
Number 123
6.77
GL GL
4.28
Basement Parking
SECTION AT AA'
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
PLINTH HEIGHT
12.68
9.69
G.L G.L
0.59
Plinth Height
Line
Color
SECTION B-B
Number 105
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
25 Floor height shall be drawn as line in Color No. 91 In all the floors,
wherever applicable
FLOOR HEIGHT
12.68
9.69
G.L G.L
0.59
Floor Height
Line
Color
SECTION B-B
Number 91
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
GATE
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
PATTA 20.64
PATTA 20.64
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
1.40
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
4M WIDE GATE
22 M.ROAD
Gate
Line SITE PLAN
Color
Number 161
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
27 Lift shall be drawn as Polyline in Color No. 22. Staircase shall Applicable Floor
be drawn as Polyline in Color No.115. Layer
Lift
Polyline
Color
Number 22
UP
UP
Staircase
Polyline
Color
Number 115
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USERMANUAL Version 2
S.No Description Layer
28 Open to sky and duct shall be drawn as Polyline in Color No. FLOOR-GROUND
3. or
Corresponding
Floor Layer
W W
WATER CLOSET
V
1.81 X 2.19
KITCHEN
2.00 x 3.00
D1
BED ROOM
3.0 x 4.5
Open to sky O
1.81 x 1.19
1
11.70
W HALL/DINING
4.93 X 3.92
MD
W
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USERMANUAL Version 2
S.No Description Layer
TREE
PATTA 10.00
RWH
REAR OPENSPACE
2.53
1.56
1.68
PATTA 20.64
PATTA 20.64
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
Tree
Text
Color
Number 93
1.68
FRONT OPENSPACE
5.05
TREES-2
3M WIDE GATE
22 M.ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
P-2
P-1
PARKING AREA
15.16 x 14.41 = 218.45 SQ.M.
MAIN ENTRY
COP-1
COP-2
P-3
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
Balcony BALCONY
Polyline
Color
Number 35
13.13
W3
KITCHEN
2.91 x 2.11
1M WIDE BALCONY
V D BED ROOM
D
3.05 x 4.57
WATER CLOSET 1
3.0 x 1.62
D2
DRG./DIN. 11.70
3.41 x 5.37
D W3
BED ROOM
3.11 x 3.40
D1
W4 W3 W3
1M WIDE BALCONY
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
ROAD WIDTH
PATTA 10.00
RWH
2.11
REAR OPENSPACE
1.30
1.40
Road width
Line
PATTA 20.64
PATTA 20.64
Color
SIDE OPENSPACE
SIDE OPENSPACE
PROPOSED BUILDING
Number 41
1.40
FRONT OPENSPACE
4.21
CAR PARK
25 SQ.M
3M WIDE GATE
22 M WIDE ROAD
SITE PLAN
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2
S.No Description Layer
BOUNDING RECTANGLE
BOUNDING RECTANGLE
Polyline
Color
Number 61
The lower left corner of the Bounding rectangle to be kept in 0,0,0 co-ordinate
Sm
ar t DC
R
GIDC-Vinzas-Smart DCR-USER MANUAL Version 2